Joe ~
Your address won't work on the USPS shipping label - it says that the
address is wrong.
I looked you up on QRZ, and it has a different address for you -
WA7JAW
CARL T BURKLEO
1050 1/2 N JUNIPER ST
COQUILLE, OR 97423
USA
I'm about to try this address to see if the USPS shipping label will accept
it -
What's the deal?
Bill
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Joe Burkleo
Sent: Thursday, February 26, 2009 10:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Needed 88.5 Micor PL Reeds
Eric and Bill,
Thanks for the reply and help.
You are both correct in that some of the reeds will not work in all
applications.
My application, which I should have specified is in a Micor factory
repeater station. The station PL decoder and encoder boards that I
have will accept either the fat or thin reeds.
Eric, thanks for keeping me honest here, as you are such a wealth of
knowledge on these radios, and your posts are always so informative to
read.
Thanks everyone for all of the reply's and help.
Joe - WA7JAW
--- In Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com, Bill Hudson w6...@... wrote:
Eric,
The thin one is the vibrasender sender as in transmit - and it is a
TLN6824a
The fat one is the vibrasponder responds or rx the PL tone - and
it's a
TLN8381A
This is always the case, and they are not interchangeable between
transmit
and receive.
The 88.5 PL frequency is referred to as YB.
I looked in my box of reeds and found two Vibrasponders (TLN8381A)
for him,
and emailed him directly as he requested.
I don't have any Vibrasenders (TLN6824A) with that tone, so he's still
looking.
Bill Hudson - ex-Mo - Graduation class of 1983 - W6CBS.
_
From: Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com
[mailto:Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com] On Behalf Of Eric Lemmon
Sent: Thursday, February 26, 2009 6:28 PM
To: Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com
Subject: RE: [Repeater-Builder] Needed 88.5 Micor PL Reeds
Joe,
You should be specific about your needs. Some Micor reeds are thin
and some
are fat- and won't fit in some radios. What part numbers do you need?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com
[mailto:Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com] On Behalf Of Joe Burkleo
Sent: Wednesday, February 25, 2009 10:53 PM
To: Repeater-Builder@ mailto:Repeater-Builder%40yahoogroups.com
yahoogroups.com
Subject: [Repeater-Builder] Needed 88.5 Micor PL Reeds
Hello,
I am in need of a couple sets of 88.5 Micor series sponders and senders.
I do have several other tones in my reed collection to trade or let me
know what you want for them.
Please email me privately off the list if you have anything.
Thanks,
Joe - WA7JAW