Hello Skipp, I am here in Tijuana, just across the border with
San Ysidro, Ca.
Good it works for you. 73.
Juan
- Original Message -
From:
skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, January 11, 2005 8:31
AM
Subject: [Repeater-Builder] Re: TKR820
(tkr-720) CORlogic(pin13)informationwanted.
Just what the doctor ordered. Thanks Juan. Su
respuesta trabajada muy bien. ¿Qué estado usted vivo adentro? Tengo
familia en GTO, MX Gracias otra vez mucho.skipp
XE2SI [EMAIL PROTECTED]... wrote: Looks
that you have an old repeater, the new ones have that pin called TOR
wich is what you want, if this is the case there is a small square
island in the controller board near the IC11 ( pin 9 ), this
change state when there is a valid "PL" received, maybe you will need
a buffer for what you need. hope this helps.
Juan - Original Message -
From: skipp025 To: Repeater-Builder@yahoogroups.com
Sent: Monday, January 10, 2005 6:27
PM Subject: [Repeater-Builder] TKR820 (tkr-720) COR logic
(pin 13)informationwanted.
Hello there, Anyone have information to
configure the COR output logic on the Kenwood TKR820
Repeater to ctcss only? I'd like to make pin 13 (COR) of
the accessory connector change states with a valid
received ctcss tone. As
received, accessory pin 13 (COR) changes state with
carrier squelch activity. This tidbit of knowledge seems
to be a rather elusive animal. Maybe one of you has done
this already? Thanks in advance for your
reply. cheers,
skipp skipp025 at yahoo.com
Yahoo! Groups Links*
To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/*
To unsubscribe from this group, send an email to: [EMAIL PROTECTED]*
Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
