Re: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
There are multiple inputs and outputs that can be programed for that purposes even there are for encode on/off ,decode on/off , you only have to look in the software.. - Mensaje original - De: Gregg Lengling Para: Repeater-Builder@yahoogroups.com Enviado: Wednesday, April 14, 2004 12:29 PM Asunto: RE: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal? You need to program one of the programmable outputs to TOR (this is a logicsignal that goes active with received signal and proper tone). Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
In the course of connecting my new TKR-850 to my Arcom RC210 controller I found out that the repeater's Squelch Control ouput is not actually a CTCSS squelch signal, it is a COS signal only. In other words, the SC pin goes from 5v to 0v whenever ANY signal is on the receiver channel, whether or not it has the right CTCSS with it. The CTCSS is enabled for the channel in the programming (173.8), but it only cuts off the audio. The CTCSS enable is not reflected on the repeater's SC pin. When I change to the wrong CTCSS code on my handheld, the receiver speaker is quiet, and no audio gets to the controller, but the busy light on the front lights and the SC pin goes to 0v. I cannot see any other output pin for CTCSS enable ... so my option appears to be either to use an external CTCSS decoder or to find a signal in the receiver that does reflect the true CTCSS enable state. Anyone deal with this issue on a TKR-850? Thanks! Jim K7RNR Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
You need to program one of the programmable outputs to TOR (this is a logic signal that goes active with received signal and proper tone). Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Politics is the art of appearing candid and completely open, while concealing as much as possible. -States: The Bene Gesserit View -Original Message- From: jfrohoff [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 14, 2004 1:50 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal? In the course of connecting my new TKR-850 to my Arcom RC210 controller I found out that the repeater's Squelch Control ouput is not actually a CTCSS squelch signal, it is a COS signal only. In other words, the SC pin goes from 5v to 0v whenever ANY signal is on the receiver channel, whether or not it has the right CTCSS with it. The CTCSS is enabled for the channel in the programming (173.8), but it only cuts off the audio. The CTCSS enable is not reflected on the repeater's SC pin. When I change to the wrong CTCSS code on my handheld, the receiver speaker is quiet, and no audio gets to the controller, but the busy light on the front lights and the SC pin goes to 0v. I cannot see any other output pin for CTCSS enable ... so my option appears to be either to use an external CTCSS decoder or to find a signal in the receiver that does reflect the true CTCSS enable state. Anyone deal with this issue on a TKR-850? Thanks! Jim K7RNR Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
At 02:29 PM 4/14/2004 -0500, you wrote: You need to program one of the programmable outputs to TOR (this is a logic signal that goes active with received signal and proper tone). ---Is there a programming option that would give him a discrete PL decode logic output, independent of COS? That is what he needs. Ken -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
jfrohoff wrote: In the course of connecting my new TKR-850 to my Arcom RC210 controller I found out that the repeater's Squelch Control ouput is not actually a CTCSS squelch signal, it is a COS signal only. In other words, the SC pin goes from 5v to 0v whenever ANY signal is on the receiver channel, whether or not it has the right CTCSS with it. The CTCSS is enabled for the channel in the programming (173.8), but it only cuts off the audio. The CTCSS enable is not reflected on the repeater's SC pin. When I change to the wrong CTCSS code on my handheld, the receiver speaker is quiet, and no audio gets to the controller, but the busy light on the front lights and the SC pin goes to 0v. I cannot see any other output pin for CTCSS enable ... so my option appears to be either to use an external CTCSS decoder or to find a signal in the receiver that does reflect the true CTCSS enable state. Anyone deal with this issue on a TKR-850? Thanks! Jim K7RNR Do you have a manual? If not, get one. -- Jim Barbour WD8CHL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal?
It tells you in the program book how to ID the pin. Its all software. Good luck! Russ - Original Message - From: jfrohoff [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Wednesday, April 14, 2004 2:50 PM Subject: [Repeater-Builder] TKR-850 - Where to get CTCSS enable signal? In the course of connecting my new TKR-850 to my Arcom RC210 controller I found out that the repeater's Squelch Control ouput is not actually a CTCSS squelch signal, it is a COS signal only. In other words, the SC pin goes from 5v to 0v whenever ANY signal is on the receiver channel, whether or not it has the right CTCSS with it. The CTCSS is enabled for the channel in the programming (173.8), but it only cuts off the audio. The CTCSS enable is not reflected on the repeater's SC pin. When I change to the wrong CTCSS code on my handheld, the receiver speaker is quiet, and no audio gets to the controller, but the busy light on the front lights and the SC pin goes to 0v. I cannot see any other output pin for CTCSS enable ... so my option appears to be either to use an external CTCSS decoder or to find a signal in the receiver that does reflect the true CTCSS enable state. Anyone deal with this issue on a TKR-850? Thanks! Jim K7RNR Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
