Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK
Hi George, If you don't mind going to the trouble, that would be great. Just verifying if the pin number/functions are the same as the Moxy would be good because I already have the Moxy pinout. 73 Jeff KP3FT --- On Wed, 9/8/10, George Henry wrote: From: George Henry Subject: Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK To: Repeater-Builder@yahoogroups.com Date: Wednesday, September 8, 2010, 7:45 PM I think I have a Maxar 80 manual at the office... I will check tomorrow morning. I think the only real difference in the connectors is that the Maxar 80 connector has 2 large pins at the top for power, while the Moxy has all pins the same size, and uses the first 2 in the 2nd row for power. All the metering, audio, and PTT pins are the same... I *THINK*... - Original Message - From: "Jeff KP3FT" To: Sent: Wednesday, September 08, 2010 2:53 PM Subject: Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK Hi George, Thanks for the reply. I had downloaded the diagram for the Moxy earlier from that website, but discovered the connector is different for the Maxar 80. Not sure if the pinout #s are the same though. I could spend the money and get a manual, but that is another 20 dollars and more time, plus I don't think I need much information really, since the new target frequency is not much higher than the original frequency and may not need retuning. It's for a beacon transmitter, so RX tuning isn't necessary. Jeff KP3FT --- On Wed, 9/8/10, George Henry wrote: From: George Henry Subject: Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK To: Repeater-Builder@yahoogroups.com Date: Wednesday, September 8, 2010, 3:40 PM I know that they are available on the Batlabs site... try http://www.batlabs.com/nosynth.html and scroll down to the Moxy section. I believe that the pinouts for the Maxar, Maxar 80, and Moxy were all the same. George, KA3HSW / WQGJ > >From: KP3FT >To: Repeater-Builder@yahoogroups.com >Sent: Wed, September 8, 2010 1:58:15 PM >Subject: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, >D51TSA4000BK > > >Hi all, >Does anyone have a scanned schematic and/or a pinout diagram for a Maxar 80 >lowband? I moving one that is presently at 49.520 MHz, up to 50.065 MHz, >but >have no idea what the pins are for PTT, etc. There is no microphone or >other >cables that came with the radio. Thanks for any help. >Jeff KP3FT >
Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK
Hi George, Thanks for the reply. I had downloaded the diagram for the Moxy earlier from that website, but discovered the connector is different for the Maxar 80. Not sure if the pinout #s are the same though. I could spend the money and get a manual, but that is another 20 dollars and more time, plus I don't think I need much information really, since the new target frequency is not much higher than the original frequency and may not need retuning. It's for a beacon transmitter, so RX tuning isn't necessary. Jeff KP3FT --- On Wed, 9/8/10, George Henry wrote: From: George Henry Subject: Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK To: Repeater-Builder@yahoogroups.com Date: Wednesday, September 8, 2010, 3:40 PM I know that they are available on the Batlabs site... try http://www.batlabs.com/nosynth.html and scroll down to the Moxy section. I believe that the pinouts for the Maxar, Maxar 80, and Moxy were all the same. George, KA3HSW / WQGJ > >From: KP3FT >To: Repeater-Builder@yahoogroups.com >Sent: Wed, September 8, 2010 1:58:15 PM >Subject: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, >D51TSA4000BK > > >Hi all, >Does anyone have a scanned schematic and/or a pinout diagram for a Maxar 80 >lowband? I moving one that is presently at 49.520 MHz, up to 50.065 MHz, but >have no idea what the pins are for PTT, etc. There is no microphone or other >cables that came with the radio. Thanks for any help. >Jeff KP3FT >
Re: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK
I know that they are available on the Batlabs site... try http://www.batlabs.com/nosynth.html and scroll down to the Moxy section. I believe that the pinouts for the Maxar, Maxar 80, and Moxy were all the same. George, KA3HSW / WQGJ > >From: KP3FT >To: Repeater-Builder@yahoogroups.com >Sent: Wed, September 8, 2010 1:58:15 PM >Subject: [Repeater-Builder] schematic and/or pinout diagram, Maxar 80, >D51TSA4000BK > > >Hi all, >Does anyone have a scanned schematic and/or a pinout diagram for a Maxar 80 >lowband? I moving one that is presently at 49.520 MHz, up to 50.065 MHz, but >have no idea what the pins are for PTT, etc. There is no microphone or other >cables that came with the radio. Thanks for any help. >Jeff KP3FT >
[Repeater-Builder] schematic and/or pinout diagram, Maxar 80, D51TSA4000BK
Hi all, Does anyone have a scanned schematic and/or a pinout diagram for a Maxar 80 lowband? I moving one that is presently at 49.520 MHz, up to 50.065 MHz, but have no idea what the pins are for PTT, etc. There is no microphone or other cables that came with the radio. Thanks for any help. Jeff KP3FT