Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

On Mon 27.Oct'08 at 15:54:39 -0400, Andy Cobaugh wrote:
> 
> Was there going to be a shipwright tarball for RT 3.8.1 ?
> 
> I saw some mention of this a while back, but have only been able to find 
> shipwright for 3.8.0.

Not yet, but when we have it, you should be able to get at it via
subversion with:

svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel

I'll see if I can make that happen today, but no promises

> 
> --andy
> ___
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
> 
> Community help: http://wiki.bestpractical.com
> Commercial support: [EMAIL PROTECTED]
> 
> 
> Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
> Buy a copy at http://rtbook.bestpractical.com
> 

-- 


pgp6A0SBw2f7L.pgp
Description: PGP signature
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: [EMAIL PROTECTED]


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Thu, Oct 30, 2008 at 1:11 PM, Jesse Vincent <[EMAIL PROTECTED]> wrote:
>
> Not yet, but when we have it, you should be able to get at it via
> subversion with:
>
> svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
>
> I'll see if I can make that happen today, but no promises

Thanks!

Also, were there issues with the build that's up there for 3.8.0? I
tried it a few days ago, and RT complained about certain perl modules
being a version or two older than what it wanted.

Also, is there an easy way to build a shipwright vessel for the
average user, or is that intended to be the job of the people making
the releases?

I intend to use shipwright to build/install RT into our distributed
filesystem here. Makes RT much easier to migrate from one machine to
another if I don't have to worry about things like perl. And sure, I
could do all of this by hand, but shipwright should greatly simplify
that ;)

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: [EMAIL PROTECTED]


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

On Thu, Oct 30, 2008 at 01:52:58PM -0400, Andrew Cobaugh wrote:
> On Thu, Oct 30, 2008 at 1:11 PM, Jesse Vincent <[EMAIL PROTECTED]> wrote:
> >
> > Not yet, but when we have it, you should be able to get at it via
> > subversion with:
> >
> > svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
> >
> > I'll see if I can make that happen today, but no promises
> 
> Thanks!
> 
> Also, were there issues with the build that's up there for 3.8.0? I
> tried it a few days ago, and RT complained about certain perl modules
> being a version or two older than what it wanted.
> 
> Also, is there an easy way to build a shipwright vessel for the
> average user, or is that intended to be the job of the people making
> the releases?

The goal is to make it easy. You can download shipwright from cpan and
give it a stab.

> 
> I intend to use shipwright to build/install RT into our distributed
> filesystem here. Makes RT much easier to migrate from one machine to
> another if I don't have to worry about things like perl. And sure, I
> could do all of this by hand, but shipwright should greatly simplify
> that ;)

That's what we're trying for :)

> --andy
> 

-- 
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: [EMAIL PROTECTED]


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Thu, Oct 30, 2008 at 12:11 PM, Jesse Vincent  wrote:
>
>
>
> On Mon 27.Oct'08 at 15:54:39 -0400, Andy Cobaugh wrote:
>>
>> Was there going to be a shipwright tarball for RT 3.8.1 ?
>>
>> I saw some mention of this a while back, but have only been able to find
>> shipwright for 3.8.0.
>
> Not yet, but when we have it, you should be able to get at it via
> subversion with:
>
> svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
>
> I'll see if I can make that happen today, but no promises

Is there a shipwright vessel for 3.8.1 ready to be made available yet?

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

On Tue, Jan 06, 2009 at 01:38:35PM -0500, Andrew Cobaugh wrote:
> >
> > svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
> >
> > I'll see if I can make that happen today, but no promises
> 
> Is there a shipwright vessel for 3.8.1 ready to be made available yet?

Can you try using svn to grab the vessel as it is today? It's freshly
updated for 3.8.2

-jesse
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Tue, Jan 13, 2009 at 2:28 PM, Jesse Vincent  wrote:
>
> On Tue, Jan 06, 2009 at 01:38:35PM -0500, Andrew Cobaugh wrote:
>> >
>> > svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
>> >
>> > I'll see if I can make that happen today, but no promises
>>
>> Is there a shipwright vessel for 3.8.1 ready to be made available yet?
>
> Can you try using svn to grab the vessel as it is today? It's freshly
> updated for 3.8.2

Yeah, I'll give it a try later today, or as soon as I have a chance to.

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Tue, Jan 13, 2009 at 2:49 PM, Andrew Cobaugh  wrote:
> On Tue, Jan 13, 2009 at 2:28 PM, Jesse Vincent  
> wrote:
>>
>> On Tue, Jan 06, 2009 at 01:38:35PM -0500, Andrew Cobaugh wrote:
>>> >
>>> > svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
>>> >
>>> > I'll see if I can make that happen today, but no promises
>>>
>>> Is there a shipwright vessel for 3.8.1 ready to be made available yet?
>>
>> Can you try using svn to grab the vessel as it is today? It's freshly
>> updated for 3.8.2

The vessel built fine up until RT...

see http://users.bx.psu.edu/~phalenor/rt-fail.txt

Looks like a few of the dists didn't get bumped up to the version
required by RT ?

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

Give it another shot?

Andrew Cobaugh  wrote:

>On Tue, Jan 13, 2009 at 2:49 PM, Andrew Cobaugh  wrote:
>> On Tue, Jan 13, 2009 at 2:28 PM, Jesse Vincent  
>> wrote:
>>>
>>> On Tue, Jan 06, 2009 at 01:38:35PM -0500, Andrew Cobaugh wrote:
 >
 > svn co http://code.bestpractical.com/shipwright/rt/3.8/ rt-3.8-vessel
 >
 > I'll see if I can make that happen today, but no promises

 Is there a shipwright vessel for 3.8.1 ready to be made available yet?
>>>
>>> Can you try using svn to grab the vessel as it is today? It's freshly
>>> updated for 3.8.2
>
>The vessel built fine up until RT...
>
>see http://users.bx.psu.edu/~phalenor/rt-fail.txt
>
>Looks like a few of the dists didn't get bumped up to the version
>required by RT ?
>
>--andy
>

-- 
Sent from my Android phone with K-9. Please excuse my brevity.___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Wed, Jan 14, 2009 at 11:43 AM, Jesse Vincent  wrote:
> Give it another shot?

nope, exactly the same dependencies missing as before.

Are you sure svn code.bestpractical.com has the correct version? svn
said it checked out revision 792, which is the same revision it's been
at since I first tried to build the vessel some months ago...

-- 
Andy Cobaugh
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

On Wed, Jan 14, 2009 at 01:45:54PM -0500, Andrew Cobaugh wrote:
> On Wed, Jan 14, 2009 at 11:43 AM, Jesse Vincent  
> wrote:
> > Give it another shot?
> 
> nope, exactly the same dependencies missing as before.
> 
> Are you sure svn code.bestpractical.com has the correct version? svn
> said it checked out revision 792, which is the same revision it's been
> at since I first tried to build the vessel some months ago...

and in fact, no, that's _not_ the correct version.   Try
http://fsck.com/~jesse/rt-3.8-vessel.tgz

> 
> -- 
> Andy Cobaugh
> 

-- 
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

First problem I encountered was with ncurses. Tic likes to use
hardlinks to process terminfo. However, AFS doesn't support hard
links, so I had to add --enable-symlinks to the ncurses build script.

Next problem came with the build of cpan-DBIx-SearchBuilder. CPAN
seems to be asking to select a geographic region over and over again:

(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) []
Sorry! since you don't have any existing picks, you must make a
geographic selection.

ctrl-c'ing out of that loop, I get this:

build cpan-DBIx-SearchBuilder configure part with failure.
 at ./bin/shipwright-builder line 379
main::_install('cpan-DBIx-SearchBuilder', 'GLOB(0x9b99630)')
called at ./bin/shipwright-builder line 287
main::install() called at ./bin/shipwright-builder line 200

Also, is it possible to pass separate install and destination
directories to shipwright-builder? I see myself in a situation where I
will be installing this into a readonly replicated volume. With AFS,
any volume that's replicated has its read-write version accessible
under /afs/.cellname, also known as the dot-path. Perl actually
detects this, and will automatically install into the dot path, but
everything will reference the normal path. It would be nice if the
other dists in the vessel could accept multiple paths - the path where
everything will ultimately reside, and the path to install to. This
would also be helpful if I want to stage the install somewhere else
temporarily.

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

> Next problem came with the build of cpan-DBIx-SearchBuilder. CPAN
> seems to be asking to select a geographic region over and over again:
> 
I can't replicate this here. Are you building perl or not building perl
as part of the vessel?

> Also, is it possible to pass separate install and destination
> directories to shipwright-builder? 

Shipwright wraps all binaries in shell scripts that properly set the ENV
to allow the built dist to be fully relocatable.

-- 
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Wed, Jan 14, 2009 at 3:43 PM, Jesse Vincent  wrote:
>
>
>> Next problem came with the build of cpan-DBIx-SearchBuilder. CPAN
>> seems to be asking to select a geographic region over and over again:
>>
> I can't replicate this here. Are you building perl or not building perl
> as part of the vessel?

Yes. Let me try again from scratch, maybe cpan failed to download something...

>> Also, is it possible to pass separate install and destination
>> directories to shipwright-builder?
>
> Shipwright wraps all binaries in shell scripts that properly set the ENV
> to allow the built dist to be fully relocatable.

So I can move RT after I install it? Where would I set this, or do the
wrapper scripts pick this up automatically?

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Jesse Vincent]

> Yes. Let me try again from scratch, maybe cpan failed to download something...

If the vessel is working right, it should not ever download anything to
build. Everything should be packaged in the vessel.
> 
> >> Also, is it possible to pass separate install and destination
> >> directories to shipwright-builder?
> >
> > Shipwright wraps all binaries in shell scripts that properly set the ENV
> > to allow the built dist to be fully relocatable.
> 
> So I can move RT after I install it? Where would I set this, or do the
> wrapper scripts pick this up automatically?

It's automatic.

> --andy
> 

-- 
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Wed, Jan 14, 2009 at 4:04 PM, Jesse Vincent  wrote:
>> Yes. Let me try again from scratch, maybe cpan failed to download 
>> something...
>
> If the vessel is working right, it should not ever download anything to
> build. Everything should be packaged in the vessel.

Nope, same thing. Here's the output before it goes into an endless
loop while trying to configure cpan:

http://users.bx.psu.edu/~phalenor/rt-fail2.txt

>> So I can move RT after I install it? Where would I set this, or do the
>> wrapper scripts pick this up automatically?
>
> It's automatic.

Thanks for the clarification.
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[sunnavy]

Hi Andrew

maybe some tests of deps failed?

please try to use this cmd to build:
$ ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2 --skip-test

# then we can run rt's own tests this way:
$ /tmp/vessel_3.8.2/bin/rt-self-test

Everything goes well for me.
Good luck!

best wishes
sunnavy


On Jan 15, 2009, at 5:30 AM, Andrew Cobaugh wrote:

> On Wed, Jan 14, 2009 at 4:04 PM, Jesse Vincent  > wrote:
>>> Yes. Let me try again from scratch, maybe cpan failed to download  
>>> something...
>>
>> If the vessel is working right, it should not ever download  
>> anything to
>> build. Everything should be packaged in the vessel.
>
> Nope, same thing. Here's the output before it goes into an endless
> loop while trying to configure cpan:
>
> http://users.bx.psu.edu/~phalenor/rt-fail2.txt
>
>>> So I can move RT after I install it? Where would I set this, or do  
>>> the
>>> wrapper scripts pick this up automatically?
>>
>> It's automatic.
>
> Thanks for the clarification.
> ___
> http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
>
> Community help: http://wiki.bestpractical.com
> Commercial support: sa...@bestpractical.com
>
>
> Discover RT's hidden secrets with RT Essentials from O'Reilly Media.
> Buy a copy at http://rtbook.bestpractical.com






___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Wed, Jan 14, 2009 at 11:44 PM, sunnavy  wrote:
> Hi Andrew
>
> maybe some tests of deps failed?
>
> please try to use this cmd to build:
> $ ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2 --skip-test
>
> # then we can run rt's own tests this way:
> $ /tmp/vessel_3.8.2/bin/rt-self-test

Nope, same thing as before.  Perhaps I have an incomplete or outdated
tarball? What do you get when you use
http://fsck.com/~jesse/rt-3.8-vessel.tgz  ?

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[sunnavy]

On Jan 15, 2009, at 1:19 PM, Andrew Cobaugh wrote:

> On Wed, Jan 14, 2009 at 11:44 PM, sunnavy  
>  wrote:
>> Hi Andrew
>>
>> maybe some tests of deps failed?
>>
>> please try to use this cmd to build:
>> $ ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2 --skip- 
>> test
>>
>> # then we can run rt's own tests this way:
>> $ /tmp/vessel_3.8.2/bin/rt-self-test
>
> Nope, same thing as before.  Perhaps I have an incomplete or outdated
> tarball? What do you get when you use
> http://fsck.com/~jesse/rt-3.8-vessel.tgz  ?
>
> --andy

I think I have found the DBIx-SearchBuilder problem, and I've updated  
our vessel.
I set up a tmp web server for you to download the latest version:

http://fsck.com:8081/vessels/3.8.tar.gz

thanks very much!

best wishes
sunnavy





___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Thu, Jan 15, 2009 at 10:48 AM, sunnavy  wrote:

>
> On Jan 15, 2009, at 1:19 PM, Andrew Cobaugh wrote:
>
> > On Wed, Jan 14, 2009 at 11:44 PM, sunnavy
> >  wrote:
> >> Hi Andrew
> >>
> >> maybe some tests of deps failed?
> >>
> >> please try to use this cmd to build:
> >> $ ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2 --skip-
> >> test
> >>
> >> # then we can run rt's own tests this way:
> >> $ /tmp/vessel_3.8.2/bin/rt-self-test
> >
> > Nope, same thing as before.  Perhaps I have an incomplete or outdated
> > tarball? What do you get when you use
> > http://fsck.com/~jesse/rt-3.8-vessel.tgz
> >  ?
> >
> > --andy
>
> I think I have found the DBIx-SearchBuilder problem, and I've updated
> our vessel.
> I set up a tmp web server for you to download the latest version:
>
> http://fsck.com:8081/vessels/3.8.tar.gz
>
> thanks very much!


I have been lurking around, but this I had to try, but wonder what I
missed...

gw# ./bin/shipwright-builder --install-base /opt/rt38
start to build and install freetype
running shipwright build command: ./configure --prefix=/opt/rt38
GNU make (>= 3.79.1) or makepp (>= 1.19) is required to build FreeType2.
Please try
  `GNUMAKE= ./configure'.
or >&2
  `GNUMAKE="makepp --norc-substitution" ./configure'.
build freetype configure part with failure.
 at ./bin/shipwright-builder line 379
main::_install('freetype', 'GLOB(0x8329524)') called at
./bin/shipwright-builder line 287
main::install() called at ./bin/shipwright-builder line 200

gw# gmake -v
GNU Make 3.81
Copyright (C) 2006  Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.

This program built for i386-portbld-freebsd7.0
gw# which gmake
/usr/local/bin/gmake

gw# ./bin/shipwright-builder --make /usr/local/bin/gmake --install-base
/opt/rt38
start to build and install freetype
running shipwright build command: ./configure --prefix=/opt/rt38
GNU make (>= 3.79.1) or makepp (>= 1.19) is required to build FreeType2.
Please try
  `GNUMAKE= ./configure'.
or >&2
  `GNUMAKE="makepp --norc-substitution" ./configure'.
build freetype configure part with failure.
 at ./bin/shipwright-builder line 379
main::_install('freetype', 'GLOB(0x8329530)') called at
./bin/shipwright-builder line 287
main::install() called at ./bin/shipwright-builder line 200

gw# uname -a
FreeBSD gw.crownkenya.com 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Thu Dec
18 09:13:33 EAT 2008 r...@freebsd-7:/usr/obj/usr/src/sys/BEASTIE-7.x
i386



-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Failure is the opportunity to begin again more intelligently." --Henry Ford
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Thu, Jan 15, 2009 at 2:48 AM, sunnavy  wrote:
>
> I think I have found the DBIx-SearchBuilder problem, and I've updated our
> vessel.
> I set up a tmp web server for you to download the latest version:
>
> http://fsck.com:8081/vessels/3.8.tar.gz

Sweet, it built this time. I should be able to find time to test this out today.

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[sunnavy]

as the error msg said, have you tried this?
GNUMAKE=gmake ./bin/shipwright-builder --install-base /tmp/ 
vessel_3.8.2 --skip-test

On Jan 15, 2009, at 10:18 PM, Odhiambo Washington wrote:

> On Thu, Jan 15, 2009 at 10:48 AM, sunnavy  
>  wrote:
>
> On Jan 15, 2009, at 1:19 PM, Andrew Cobaugh wrote:
>
> > On Wed, Jan 14, 2009 at 11:44 PM, sunnavy
> >  wrote:
> >> Hi Andrew
> >>
> >> maybe some tests of deps failed?
> >>
> >> please try to use this cmd to build:
> >> $ ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2 --skip-
> >> test
> >>
> >> # then we can run rt's own tests this way:
> >> $ /tmp/vessel_3.8.2/bin/rt-self-test
> >
> > Nope, same thing as before.  Perhaps I have an incomplete or  
> outdated
> > tarball? What do you get when you use
> > http://fsck.com/~jesse/rt-3.8-vessel.tgz  ?
> >
> > --andy
>
> I think I have found the DBIx-SearchBuilder problem, and I've updated
> our vessel.
> I set up a tmp web server for you to download the latest version:
>
> http://fsck.com:8081/vessels/3.8.tar.gz
>
> thanks very much!
>
> I have been lurking around, but this I had to try, but wonder what I  
> missed...
>
> gw# ./bin/shipwright-builder --install-base /opt/rt38
> start to build and install freetype
> running shipwright build command: ./configure --prefix=/opt/rt38
> GNU make (>= 3.79.1) or makepp (>= 1.19) is required to build  
> FreeType2.
> Please try
>   `GNUMAKE= ./configure'.
> or >&2
>   `GNUMAKE="makepp --norc-substitution" ./configure'.
> build freetype configure part with failure.
>  at ./bin/shipwright-builder line 379
> main::_install('freetype', 'GLOB(0x8329524)') called at ./ 
> bin/shipwright-builder line 287
> main::install() called at ./bin/shipwright-builder line 200
>
> gw# gmake -v
> GNU Make 3.81
> Copyright (C) 2006  Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
>
> This program built for i386-portbld-freebsd7.0
> gw# which gmake
> /usr/local/bin/gmake
>
> gw# ./bin/shipwright-builder --make /usr/local/bin/gmake --install- 
> base /opt/rt38
> start to build and install freetype
> running shipwright build command: ./configure --prefix=/opt/rt38
> GNU make (>= 3.79.1) or makepp (>= 1.19) is required to build  
> FreeType2.
> Please try
>   `GNUMAKE= ./configure'.
> or >&2
>   `GNUMAKE="makepp --norc-substitution" ./configure'.
> build freetype configure part with failure.
>  at ./bin/shipwright-builder line 379
> main::_install('freetype', 'GLOB(0x8329530)') called at ./ 
> bin/shipwright-builder line 287
> main::install() called at ./bin/shipwright-builder line 200
>
> gw# uname -a
> FreeBSD gw.crownkenya.com 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0:  
> Thu Dec 18 09:13:33 EAT 2008 r...@freebsd-7:/usr/obj/usr/src/sys/ 
> BEASTIE-7.x  i386
>
>
>
> -- 
> Best regards,
> Odhiambo WASHINGTON,
> Nairobi,KE
> +254733744121/+254722743223
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> "Failure is the opportunity to begin again more intelligently." -- 
> Henry Ford


best wishes
sunnavy





___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Thu, Jan 15, 2009 at 5:43 PM, sunnavy  wrote:

> as the error msg said, have you tried this?
> GNUMAKE=gmake ./bin/shipwright-builder --install-base /tmp/vessel_3.8.2
> --skip-test


Aah now ...

configure: creating ./config.status
config.status: creating unix-cc.mk
config.status: creating unix-def.mk
config.status: creating freetype-config
config.status: creating freetype2.pc
config.status: creating ftconfig.h
config.status: executing libtool commands
gmake: Nothing to be done for `unix'.
running shipwright build command: make
"./builds/toplevel.mk", line 50: Need an operator
"./builds/toplevel.mk", line 52: Missing dependency operator
"./builds/toplevel.mk", line 54: Need an operator
"./builds/toplevel.mk", line 55: Need an operator
"./builds/toplevel.mk", line 64: Could not find ./objs/modules.cfg
"./builds/toplevel.mk", line 86: Missing dependency operator
"./builds/toplevel.mk", line 88: Need an operator
Error expanding embedded variable.
build freetype make part with failure.
 at ./bin/shipwright-builder line 379
main::_install('freetype', 'GLOB(0x8329548)') called at
./bin/shipwright -builder line
287
main::install() called at ./bin/shipwright-builder line 200


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Failure is the opportunity to begin again more intelligently." --Henry Ford
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[sunnavy]

Hi Odhiambo

seems gmake can work, now try this one, with telling shipwright- 
builder the right 'make' cmd:

$ GNUMAKE=gmake ./bin/shipwright-builder --make gmake --install-base / 
tmp/vessel_3.8.2 --skip-test

On Jan 15, 2009, at 10:48 PM, Odhiambo Washington wrote:

>
>
> On Thu, Jan 15, 2009 at 5:43 PM, sunnavy   
> wrote:
> as the error msg said, have you tried this?
> GNUMAKE=gmake ./bin/shipwright-builder --install-base /tmp/ 
> vessel_3.8.2 --skip-test
>
> Aah now ...
>
> configure: creating ./config.status
> config.status: creating unix-cc.mk
> config.status: creating unix-def.mk
> config.status: creating freetype-config
> config.status: creating freetype2.pc
> config.status: creating ftconfig.h
> config.status: executing libtool commands
> gmake: Nothing to be done for `unix'.
> running shipwright build command: make
> "./builds/toplevel.mk", line 50: Need an operator
> "./builds/toplevel.mk", line 52: Missing dependency operator
> "./builds/toplevel.mk", line 54: Need an operator
> "./builds/toplevel.mk", line 55: Need an operator
> "./builds/toplevel.mk", line 64: Could not find ./objs/modules.cfg
> "./builds/toplevel.mk", line 86: Missing dependency operator
> "./builds/toplevel.mk", line 88: Need an operator
> Error expanding embedded variable.
> build freetype make part with failure.
>  at ./bin/shipwright-builder line 379
> main::_install('freetype', 'GLOB(0x8329548)') called at ./ 
> bin/shipwright -builder  
> line 287
> main::install() called at ./bin/shipwright-builder line 200
>
>
> -- 
> Best regards,
> Odhiambo WASHINGTON,
> Nairobi,KE
> +254733744121/+254722743223
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> "Failure is the opportunity to begin again more intelligently." -- 
> Henry Ford


best wishes
sunnavy





___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Thu, Jan 15, 2009 at 6:28 PM, sunnavy  wrote:

> Hi Odhiambo
>
> seems gmake can work, now try this one, with telling shipwright-builder the
> right 'make' cmd:
>
> $ GNUMAKE=gmake ./bin/shipwright-builder --make gmake --install-base
> /tmp/vessel_3.8.2 --skip-test


Now this one is running ...

According to the README, I am now on:
2. Get some coffee; it'll be a while

So I will go sleep and wake up on it tomorrow.

Thank you so much.


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Failure is the opportunity to begin again more intelligently." --Henry Ford
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Thu, Jan 15, 2009 at 6:58 PM, Odhiambo Washington wrote:

>
>
> On Thu, Jan 15, 2009 at 6:28 PM, sunnavy wrote:
>
>> Hi Odhiambo
>>
>> seems gmake can work, now try this one, with telling shipwright-builder
>> the right 'make' cmd:
>>
>> $ GNUMAKE=gmake ./bin/shipwright-builder --make gmake --install-base
>> /tmp/vessel_3.8.2 --skip-test
>
>
> Now this one is running ...
>
> According to the README, I am now on:
> 2. Get some coffee; it'll be a while
>
> So I will go sleep and wake up on it tomorrow.
>

I spoke too soon. Maybe it heard me... and failed:)


Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for perlmain.o.
Finding dependencies for opmini.o.
echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH
makedir.SH my config.SH
writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
Updating makefile...
test -s perlmain.c && touch perlmain.c
cd x2p; make depend
sh ../makedepend MAKE=make
echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
Updating makefile...
Now you must run 'make'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

sed: 1: "./x2p/makefile": invalid command code .
build perl configure part with failure.
 at ./bin/shipwright-builder line 379
main::_install('perl', 'GLOB(0x8329560)') called at
./bin/shipwright-bui lder line
287
main::install() called at ./bin/shipwright-builder line 200


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Failure is the opportunity to begin again more intelligently." --Henry Ford
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[sunnavy]

hmm, seems some dists don't like gmake.
I suggest get around this by another way, i.e. cp gmake to make:
$ cd ( to home dir )
$ mkdir bin
$ cp /usr/local/bin/gmake bin/make
$ cd ( to rt dir )
$ PATH=~/bin:$PATH ./bin/shipwright-builder --install-base /tmp/ 
vessel_3.8.2 --skip-test

Good luck!

On Jan 16, 2009, at 12:01 AM, Odhiambo Washington wrote:

> On Thu, Jan 15, 2009 at 6:58 PM, Odhiambo Washington  > wrote:
>
>
> On Thu, Jan 15, 2009 at 6:28 PM, sunnavy   
> wrote:
> Hi Odhiambo
>
> seems gmake can work, now try this one, with telling shipwright- 
> builder the right 'make' cmd:
>
> $ GNUMAKE=gmake ./bin/shipwright-builder --make gmake --install- 
> base /tmp/vessel_3.8.2 --skip-test
>
> Now this one is running ...
>
> According to the README, I am now on:
> 2. Get some coffee; it'll be a while
>
> So I will go sleep and wake up on it tomorrow.
>
> I spoke too soon. Maybe it heard me... and failed:)
>
> 
> Finding dependencies for perlio.o.
> Finding dependencies for perlapi.o.
> Finding dependencies for numeric.o.
> Finding dependencies for locale.o.
> Finding dependencies for pp_pack.o.
> Finding dependencies for pp_sort.o.
> Finding dependencies for miniperlmain.o.
> Finding dependencies for perlmain.o.
> Finding dependencies for opmini.o.
> echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH   
> makedir.SH my config.SH  
> writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
> Updating makefile...
> test -s perlmain.c && touch perlmain.c
> cd x2p; make depend
> sh ../makedepend MAKE=make
> echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
> Finding dependencies for hash.o.
> Finding dependencies for str.o.
> Finding dependencies for util.o.
> Finding dependencies for walk.o.
> echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
> Updating makefile...
> Now you must run 'make'.
>
> If you compile perl5 on a different machine or from a different object
> directory, copy the Policy.sh file from this object directory to the
> new one before you run Configure -- this will help you with most of
> the policy defaults.
>
> sed: 1: "./x2p/makefile": invalid command code .
> build perl configure part with failure.
>  at ./bin/shipwright-builder line 379
> main::_install('perl', 'GLOB(0x8329560)') called at ./bin/ 
> shipwright-bui lder line  
> 287
> main::install() called at ./bin/shipwright-builder line 200
>
>
> -- 
> Best regards,
> Odhiambo WASHINGTON,
> Nairobi,KE
> +254733744121/+254722743223
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> "Failure is the opportunity to begin again more intelligently." -- 
> Henry Ford


best wishes
sunnavy





___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Thu, Jan 15, 2009 at 7:38 PM, sunnavy  wrote:

> hmm, seems some dists don't like gmake.
> I suggest get around this by another way, i.e. cp gmake to make:
> $ cd ( to home dir )
> $ mkdir bin
> $ cp /usr/local/bin/gmake bin/make
> $ cd ( to rt dir )
> $ PATH=~/bin:$PATH ./bin/shipwright-builder --install-base
> /tmp/vessel_3.8.2 --skip-test
>
> Good luck!


It fails at the exact same point with the exact same message, so this method
does not make a difference.
Anything else I can try?


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Failure is the opportunity to begin again more intelligently." --Henry Ford
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Fri, Jan 16, 2009 at 1:42 AM, Odhiambo Washington  wrote:
> On Thu, Jan 15, 2009 at 7:38 PM, sunnavy  wrote:
>>
>> hmm, seems some dists don't like gmake.
>> I suggest get around this by another way, i.e. cp gmake to make:
>> $ cd ( to home dir )
>> $ mkdir bin
>> $ cp /usr/local/bin/gmake bin/make
>> $ cd ( to rt dir )
>> $ PATH=~/bin:$PATH ./bin/shipwright-builder --install-base
>> /tmp/vessel_3.8.2 --skip-test
>>
>> Good luck!
>
> It fails at the exact same point with the exact same message, so this method
> does not make a difference.
> Anything else I can try?

Actually, the error you posted before looks like a problem with sed.
What sed are you using? Do you have gnu sed laying around somewhere
that you could try the same thing with (copying gsed to sed under
~/bin).

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Fri, Jan 16, 2009 at 4:00 PM, Andrew Cobaugh  wrote:

> On Fri, Jan 16, 2009 at 1:42 AM, Odhiambo Washington 
> wrote:
> > On Thu, Jan 15, 2009 at 7:38 PM, sunnavy 
> wrote:
> >>
> >> hmm, seems some dists don't like gmake.
> >> I suggest get around this by another way, i.e. cp gmake to make:
> >> $ cd ( to home dir )
> >> $ mkdir bin
> >> $ cp /usr/local/bin/gmake bin/make
> >> $ cd ( to rt dir )
> >> $ PATH=~/bin:$PATH ./bin/shipwright-builder --install-base
> >> /tmp/vessel_3.8.2 --skip-test
> >>
> >> Good luck!
> >
> > It fails at the exact same point with the exact same message, so this
> method
> > does not make a difference.
> > Anything else I can try?
>
> Actually, the error you posted before looks like a problem with sed.
> What sed are you using? Do you have gnu sed laying around somewhere
> that you could try the same thing with (copying gsed to sed under
> ~/bin).
>

How do I find out sed version?
This is default sed in FreeBSD 7.x


-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"The only time a woman really succeeds in changing a man is when he is a
baby."
 - Natalie Wood
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Andrew Cobaugh]

On Fri, Jan 16, 2009 at 8:08 AM, Odhiambo Washington  wrote:
> How do I find out sed version?
> This is default sed in FreeBSD 7.x

sed --version, at least with GNU sed. I'm not as familiar with freebsd
as I should be, so I don't know what sed they use by default.

Might be worth trying to see if you can get gsed installed.

--andy
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com

Re: [rt-users] shipwright tarball for RT 3.8.1 ?

[Odhiambo Washington]

On Fri, Jan 16, 2009 at 4:13 PM, Andrew Cobaugh  wrote:

> On Fri, Jan 16, 2009 at 8:08 AM, Odhiambo Washington 
> wrote:
> > How do I find out sed version?
> > This is default sed in FreeBSD 7.x
>
> sed --version, at least with GNU sed.


I tried that b4 posting. It did not work.
gw# sed --version
sed: illegal option -- -
usage: sed script [-Ealn] [-i extension] [file ...]
   sed [-Ealn] [-i extension] [-e script] ... [-f script_file] ... [file
...]


> I'm not as familiar with freebsd as I should be, so I don't know what sed
> they use by default.
>
> Might be worth trying to see if you can get gsed installed.


I don't think it's worth breaking a system that much, so I will continue to
install RT the old way.

I give up on this test of shipwright, as installing gsed does not conform to
KISS principle.

Thanks though for the suggestions.



-- 
Best regards,
Odhiambo WASHINGTON,
Nairobi,KE
+254733744121/+254722743223
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"The only time a woman really succeeds in changing a man is when he is a
baby."
 - Natalie Wood
___
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sa...@bestpractical.com


Discover RT's hidden secrets with RT Essentials from O'Reilly Media. 
Buy a copy at http://rtbook.bestpractical.com