Re: [Samba] Samba 3.2 on FreeBSD
[EMAIL PROTECTED] wrote: > > [EMAIL PROTECTED] wrote: >> >> Herb Lewis wrote: >>> run the following to find out where it should be >>> >>> smbd -b | grep CONFIGFILE >>> >>> >>> [EMAIL PROTECTED] wrote: Ok, that is how I installed it, but the other answer from Terry was: "Yes in /usr/local/etc/smb.conf" The config file was in neither. Most of the directories were in the 'usr/local/samba' and there was nothing in the '/usr/local/etc' as far as samba goes. I would have thought that it would have put a smb.conf in one of the directories or at least an example in one. I just want to make sure that I get it in the correct place. Thanks. >> >> I tried that and it looks like the shared object libtalloc.so.1 is not >> found. I searched for it on the server just to make sure it was not in >> the wrong place or did not have a link to it, but it is no where to be >> found. Guess I'll have to find out where to get it installed from. >> >> Any ideas on that? >> >> I may should have just left 3.0.30,1 on there and gone with that. :) > > Whoops my bad. I had a typo. Now I need to know for sure where the > libtallco.so.1 goes. > I just uninstalled it and ran the configure again and I noticed a few WARNINGS about sys/mount.h and netinet/ip.h present but cannot be compiled. I am not sure what that is about. I think I'll just go back and use the 3.0.30 port and install it. Hopefully there is not too much that I will be missing and maybe I can just upgrade to 3.2 later on. Thanks. -- Scott Mayo - System Administrator Bloomfield Schools PH: 573-568-5669 FA: 573-568-4565 Question: Because it reverses the logical flow of conversation. Answer: Why is putting a reply at the top of the message frowned upon? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba 3.2 on FreeBSD
[EMAIL PROTECTED] wrote: > > Herb Lewis wrote: >> run the following to find out where it should be >> >> smbd -b | grep CONFIGFILE >> >> >> [EMAIL PROTECTED] wrote: >>> Ok, that is how I installed it, but the other answer from Terry was: >>> >>> "Yes in /usr/local/etc/smb.conf" >>> >>> The config file was in neither. Most of the directories were in the >>> 'usr/local/samba' and there was nothing in the '/usr/local/etc' as far >>> as >>> samba goes. >>> >>> I would have thought that it would have put a smb.conf in one of the >>> directories or at least an example in one. I just want to make sure >>> that >>> I get it in the correct place. >>> >>> Thanks. > > I tried that and it looks like the shared object libtalloc.so.1 is not > found. I searched for it on the server just to make sure it was not in > the wrong place or did not have a link to it, but it is no where to be > found. Guess I'll have to find out where to get it installed from. > > Any ideas on that? > > I may should have just left 3.0.30,1 on there and gone with that. :) Whoops my bad. I had a typo. Now I need to know for sure where the libtallco.so.1 goes. -- Scott Mayo - System Administrator Bloomfield Schools PH: 573-568-5669 FA: 573-568-4565 Question: Because it reverses the logical flow of conversation. Answer: Why is putting a reply at the top of the message frowned upon? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba 3.2 on FreeBSD
Herb Lewis wrote: > run the following to find out where it should be > > smbd -b | grep CONFIGFILE > > > [EMAIL PROTECTED] wrote: >> Ok, that is how I installed it, but the other answer from Terry was: >> >> "Yes in /usr/local/etc/smb.conf" >> >> The config file was in neither. Most of the directories were in the >> 'usr/local/samba' and there was nothing in the '/usr/local/etc' as far >> as >> samba goes. >> >> I would have thought that it would have put a smb.conf in one of the >> directories or at least an example in one. I just want to make sure >> that >> I get it in the correct place. >> >> Thanks. I tried that and it looks like the shared object libtalloc.so.1 is not found. I searched for it on the server just to make sure it was not in the wrong place or did not have a link to it, but it is no where to be found. Guess I'll have to find out where to get it installed from. Any ideas on that? I may should have just left 3.0.30,1 on there and gone with that. :) -- Scott Mayo - System Administrator Bloomfield Schools PH: 573-568-5669 FA: 573-568-4565 Question: Because it reverses the logical flow of conversation. Answer: Why is putting a reply at the top of the message frowned upon? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba 3.2 on FreeBSD
run the following to find out where it should be smbd -b | grep CONFIGFILE [EMAIL PROTECTED] wrote: Ok, that is how I installed it, but the other answer from Terry was: "Yes in /usr/local/etc/smb.conf" The config file was in neither. Most of the directories were in the 'usr/local/samba' and there was nothing in the '/usr/local/etc' as far as samba goes. I would have thought that it would have put a smb.conf in one of the directories or at least an example in one. I just want to make sure that I get it in the correct place. Thanks. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba 3.2 on FreeBSD
Volker Lendecke wrote: > On Fri, Jul 18, 2008 at 10:06:11AM -0500, [EMAIL PROTECTED] > wrote: >> I uninstalled my 3.0.30 port and then downloaded the samba-latest.tar.gz >> file and installed it so that I was starting out with 3.2.0. After >> installing, I cannot find the smb.conf file anywhere other than in the >> examples. >> >> Where do I need to place this file? Does it need to go in >> /usr/local/etc? >> I know that on my linux boxes it always placed it in /etc/samba. I >> would >> have thought that it would have placed it where it needed to on FreeBSD >> also, but I guess I was wrong. > > That depends upon how you installed it. If you did a simple > ./configure; make; make install > Samba would expect its configuration file under > /usr/local/samba/lib/smb.conf Ok, that is how I installed it, but the other answer from Terry was: "Yes in /usr/local/etc/smb.conf" The config file was in neither. Most of the directories were in the 'usr/local/samba' and there was nothing in the '/usr/local/etc' as far as samba goes. I would have thought that it would have put a smb.conf in one of the directories or at least an example in one. I just want to make sure that I get it in the correct place. Thanks. -- Scott Mayo - System Administrator Bloomfield Schools PH: 573-568-5669 FA: 573-568-4565 Question: Because it reverses the logical flow of conversation. Answer: Why is putting a reply at the top of the message frowned upon? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba 3.2 on FreeBSD
On Fri, Jul 18, 2008 at 10:06:11AM -0500, [EMAIL PROTECTED] wrote: > I uninstalled my 3.0.30 port and then downloaded the samba-latest.tar.gz > file and installed it so that I was starting out with 3.2.0. After > installing, I cannot find the smb.conf file anywhere other than in the > examples. > > Where do I need to place this file? Does it need to go in /usr/local/etc? > I know that on my linux boxes it always placed it in /etc/samba. I would > have thought that it would have placed it where it needed to on FreeBSD > also, but I guess I was wrong. That depends upon how you installed it. If you did a simple ./configure; make; make install Samba would expect its configuration file under /usr/local/samba/lib/smb.conf Volker pgp2r8DmnfB6S.pgp Description: PGP signature -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
[Samba] Samba 3.2 on FreeBSD
I uninstalled my 3.0.30 port and then downloaded the samba-latest.tar.gz file and installed it so that I was starting out with 3.2.0. After installing, I cannot find the smb.conf file anywhere other than in the examples. Where do I need to place this file? Does it need to go in /usr/local/etc? I know that on my linux boxes it always placed it in /etc/samba. I would have thought that it would have placed it where it needed to on FreeBSD also, but I guess I was wrong. Thanks. -- Scott Mayo - System Administrator Bloomfield Schools PH: 573-568-5669 FA: 573-568-4565 Question: Because it reverses the logical flow of conversation. Answer: Why is putting a reply at the top of the message frowned upon? -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba