Re: [Samba] USRMGR.EXE doesn't work anymore.
same here, thx Umberto Zanatta wrote: Hi, I've compiled samba with the patch and installed it. both of usrmgr and srvmgr are working now. Thanks. Il giorno gio, 01/09/2005 alle 14.09 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- Michael Gasch Max Planck Institute for Evolutionary Anthropology Department of Human Evolution (IT) Deutscher Platz 6 D-04103 Leipzig Germany Phone: 49 (0)341 - 3550 137 -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Hi, I've compiled samba with the patch and installed it. both of usrmgr and srvmgr are working now. Thanks. Il giorno gio, 01/09/2005 alle 14.09 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Samba is compiled by sernet, I will try to recompile without libaio. thanks. Il giorno sab, 03/09/2005 alle 01.24 +0200, Thomas Bork ha scritto: Umberto Zanatta wrote: | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler I have this message, if 3.0.20 was compiled with aio support - even if aio support in smb.conf is deactivated with aio read size = aio write size = This leads here to problems with oplocking. If compiling without aio support, the oplock problems and the message is gone. der tom -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
I have not tested yet because the server is a PDC Server (over 400 people log on Samba everyday). I'm going to install the patch on the weekend. Thanks a lot. Cheers, uz I do hope the problem is not on SLES 8 Il giorno gio, 01/09/2005 alle 14.09 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
RE: [Samba] USRMGR.EXE doesn't work anymore.
Hi, Just a little side note. Not really a good idea to be testing patches in production servers... Best Regards, Bruno Guerreiro -Original Message- From: Umberto Zanatta [mailto:[EMAIL PROTECTED] Sent: sexta-feira, 2 de Setembro de 2005 10:05 To: Gerald (Jerry) Carter Cc: Bruno Guerreiro; [EMAIL PROTECTED]; 'samba@lists.samba.org' Subject: Re: [Samba] USRMGR.EXE doesn't work anymore. I have not tested yet because the server is a PDC Server (over 400 people log on Samba everyday). I'm going to install the patch on the weekend. Thanks a lot. Cheers, uz I do hope the problem is not on SLES 8 Il giorno gio, 01/09/2005 alle 14.09 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
RE: [Samba] USRMGR.EXE doesn't work anymore.
Hi, After applying the patches available today, all the problems i've mentioned have disappeared. Testing an older one, it still exists. If I add a user to more than 60 or 70 groups, that usermanager can no longer manage that user. It gives: The remote procedure call failed The user properties cannot be edited or viewed at this time I then have to refresh user/group list or else every user will fail That user also can't access resources which permissions are group based. In the samba log's the following lines appear: *** glibc detected *** double free or corruption (!prev): 0xb879cc10 *** Best Regards, Bruno Guerreiro -Original Message- From: Gerald (Jerry) Carter [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 1 de Setembro de 2005 20:10 To: Umberto Zanatta Cc: Bruno Guerreiro; [EMAIL PROTECTED]; 'samba@lists.samba.org' Subject: Re: [Samba] USRMGR.EXE doesn't work anymore. -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Umberto Zanatta wrote: | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler I have this message, if 3.0.20 was compiled with aio support - even if aio support in smb.conf is deactivated with aio read size = aio write size = This leads here to problems with oplocking. If compiling without aio support, the oplock problems and the message is gone. der tom -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
On Sat, Sep 03, 2005 at 01:24:06AM +0200, Thomas Bork wrote: Umberto Zanatta wrote: | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler I have this message, if 3.0.20 was compiled with aio support - even if aio support in smb.conf is deactivated with aio read size = aio write size = This leads here to problems with oplocking. If compiling without aio support, the oplock problems and the message is gone. aio support is exteremly experimental. I did it to learn about what effects this would have on our performance (the answer - it's a *negative* unless there's kernel support - even then it may not help...). Please don't turn this on unless you're currently working on glibc or kernel aio code paths. Jeremy. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Jeremy Allison wrote: | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler I have this message, if 3.0.20 was compiled with aio support - even if [...] aio support is exteremly experimental. I did it to learn about what effects this would have on our performance (the answer - it's a *negative* unless there's kernel support - even then it may not help...). Please don't turn this on unless you're currently working on glibc or kernel aio code paths. It was only meant as a tip for the error message 'Failed to setup RT_SIGNAL_LEASE' for Umberto. I tested the aio support only a short time and removed it due problems. der tom -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
RE: [Samba] USRMGR.EXE doesn't work anymore.
Hi, I've got the same problem ( http://lists.samba.org/archive/samba/2005-August/109895.html ). It seems this has been laying around since RC1/2 ( http://lists.samba.org/archive/samba/2005-August/109465.html ) I've already supplied a level 10 log to Günther Deschner, If you wish I may forward it to you. Best Regards, Bruno Guerreiro -Original Message- From: Gerald (Jerry) Carter [mailto:[EMAIL PROTECTED] Sent: quarta-feira, 31 de Agosto de 2005 17:45 To: Umberto Zanatta Cc: samba@lists.samba.org Subject: Re: [Samba] USRMGR.EXE doesn't work anymore. -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | This is the log about usrmgr. | | | Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, | effective(0, 512), real(0, 0)] rpc_parse/parse_prs.c:prs_mem_get(533) | Aug 31 18:26:55 provtvlp smbd[17237]: prs_mem_get: reading data of | size 4 would overrun buffer. | Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, | effective(0, 512), real(0, 0)] rpc_server/srv_pipe.c:api_rpcTNP(1572) | Aug 31 18:26:55 provtvlp smbd[17237]: api_rpcTNP: winreg: | REG_CREATE_KEY_EX failed. | | Thank you. Seriously? ok. I'll fix that up. Might be later this week. I'll post a patch once I'm done. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFd6PIR7qMdg1EfYRAl+JAJ9TEpPUHW26rm0/gBHSw/NvqMzhQwCfT8qy dTvq/Hxm6iTM3m7jeRWFD5k= =G0R0 -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Bruno Guerreiro wrote: | Hi, | I've got the same problem ( | http://lists.samba.org/archive/samba/2005-August/109895.html ). | It seems this has been laying around since RC1/2 ( | http://lists.samba.org/archive/samba/2005-August/109465.html ) | I've already supplied a level 10 log to Günther Deschner, | If you wish I may forward it to you. Please do. If it's just the REG_CREATE_KEY issue, then I might be able to fix that today. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFt5CIR7qMdg1EfYRAnTiAKDUD4YQ5ay4SKCAD+Gkrt+XWCxWUwCfZQdT II0cpiE9vLCnSKuRksD2rTY= =SltA -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
RE: [Samba] USRMGR.EXE doesn't work anymore.
Where goes. The log.vmxp is for the client running usrmgr Best regards, Bruno Guerreiro -Original Message- From: Gerald (Jerry) Carter [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 1 de Setembro de 2005 11:56 To: Bruno Guerreiro Cc: 'samba@lists.samba.org' Subject: Re: [Samba] USRMGR.EXE doesn't work anymore. -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Bruno Guerreiro wrote: | Hi, | I've got the same problem ( | http://lists.samba.org/archive/samba/2005-August/109895.html ). | It seems this has been laying around since RC1/2 ( | http://lists.samba.org/archive/samba/2005-August/109465.html ) | I've already supplied a level 10 log to Günther Deschner, | If you wish I may forward it to you. Please do. If it's just the REG_CREATE_KEY issue, then I might be able to fix that today. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFt5CIR7qMdg1EfYRAnTiAKDUD4YQ5ay4SKCAD+Gkrt+XWCxWUwCfZQdT II0cpiE9vLCnSKuRksD2rTY= =SltA -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 ok Folks I've tried but cannot reproduce this. The REG_CREATE_EX failure is during a domain logon from Windows XP. The client is trying to create [System\CurrentControlSet\Control\Terminal Server\ DefaultUserConfiguration] I can fix this, but it appears to have nothing to do with user manager. Until I get those logs or a faw network sniff of the connection failure, I'm stuck. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFulZIR7qMdg1EfYRArG8AKC4ciUg01uELfBdcSbbZKrF+9kD3ACeP7SW 3sG3s43tc1vrKj/5VfzPe+Q= =HMRV -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gerald (Jerry) Carter wrote: | ok Folks | | I've tried but cannot reproduce this. The REG_CREATE_EX | failure is during a domain logon from Windows XP. The | client is trying to create | | [System\CurrentControlSet\Control\Terminal Server\ | DefaultUserConfiguration] | | I can fix this, but it appears to have nothing to do | with user manager. Until I get those logs or a faw | network sniff of the connection failure, I'm stuck. ok. Can you folks try out the patch at http://samba.org/~jerry/patches/regcreatekey_v1.patch and let me know if that fixes the usrmgr.exe failures you are seeing? It should at least fix the REG_CREATE_KEY_EX failures in the logs. cheer,s jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFv99IR7qMdg1EfYRAjEQAKDSu2KW1wglAXbMkWePCXQNAc0RoQCfV1Hk hdNoTno8WFF8iFDRzdmGPSg= =+K+E -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Gerald (Jerry) Carter wrote: ok. Can you folks try out the patch at http://samba.org/~jerry/patches/regcreatekey_v1.patch and let me know if that fixes the usrmgr.exe failures you are seeing? It should at least fix the REG_CREATE_KEY_EX failures in the logs. + HKLM\\SYSTEM\\CurrentControlSet\\Control\\Termininal Server\DefaultUserConfiguration, Are you shure, you only need one backslash before DefaultUserConfiguration and not two backslashes as in the rest of rpc_reg.h? -- der tom -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thomas Bork wrote: | Gerald (Jerry) Carter wrote: | | ok. Can you folks try out the patch at | http://samba.org/~jerry/patches/regcreatekey_v1.patch | and let me know if that fixes the usrmgr.exe failures | you are seeing? It should at least fix the REG_CREATE_KEY_EX | failures in the logs. | | +HKLM\\SYSTEM\\CurrentControlSet\\Control\\Termininal | Server\DefaultUserConfiguration, | | Are you shure, you only need one backslash before | DefaultUserConfiguration and not two backslashes as in the rest of | rpc_reg.h? Your right. Thanks for catching it. But that's ifdef'd out for now. I wanted to focus on the rpc fault before adding the key (which would prevent the client from sending the RegCraetKeyEx() request altogether. That mistake, shouldn't make any difference in the patch for now. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFwMBIR7qMdg1EfYRAqiRAJ4l031odqMidvBVrxmQJoWAB7CuMwCcD4Nk IHCWtLyVObEBz0/tLIggyI8= =lZwu -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
RE: [Samba] USRMGR.EXE doesn't work anymore.
, 10] lib/adt_tree.c:pathtree_find(460) pathtree_find: Exit [2005/08/31 18:26:56, 5] registry/reg_db.c:regdb_fetch_keys(382) regdb_fetch_keys: tdb lookup failed to locate key [HKLM\System\CurrentControlSet\Control\Terminal Server] [2005/08/31 18:26:56, 7] rpc_server/srv_reg_nt.c:open_registry_key(200) open_registry_key: exit Best Regards, Bruno Guerreiro -Original Message- From: Gerald (Jerry) Carter [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 1 de Setembro de 2005 14:18 To: Bruno Guerreiro; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: 'samba@lists.samba.org' Subject: Re: [Samba] USRMGR.EXE doesn't work anymore. -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gerald (Jerry) Carter wrote: | ok Folks | | I've tried but cannot reproduce this. The REG_CREATE_EX | failure is during a domain logon from Windows XP. The | client is trying to create | | [System\CurrentControlSet\Control\Terminal Server\ | DefaultUserConfiguration] | | I can fix this, but it appears to have nothing to do | with user manager. Until I get those logs or a faw | network sniff of the connection failure, I'm stuck. ok. Can you folks try out the patch at http://samba.org/~jerry/patches/regcreatekey_v1.patch and let me know if that fixes the usrmgr.exe failures you are seeing? It should at least fix the REG_CREATE_KEY_EX failures in the logs. cheer,s jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFv99IR7qMdg1EfYRAjEQAKDSu2KW1wglAXbMkWePCXQNAc0RoQCfV1Hk hdNoTno8WFF8iFDRzdmGPSg= =+K+E -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Bruno Guerreiro wrote: | I started by getting to the point where users and | local groups were listed. Then a Stub received bad | data message appeared. Tried net rpc groupmap list | and net rpc group It worked. | Tried usermanager again, no errors | Tried using usermanager to modify user/groups. It worked. | Restarted samba and Ldap. Usermanager still works. | Restarted windows client. Usermanager still works. | | So, i guessed you smashed the right bug. :-) Still very curious to me. Wonder why I could never reproduce the usrmgr.exe failure. Hmmm... | The weird thing is the REG_CREATE_KEY_EX still | gives an error: It's a failure to create the key rather than an RPC failure error though. I've also gone ahead and added the registry key to the Samba's registry.tdb file in the patch posted at http://www.samba.org/samba/patches/ Thanks for the help testing the changes. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFyprIR7qMdg1EfYRAi4bAJ9j4Zr+kuI5izGi00ysfP7rntic/gCfQM0p 8z9c27lHJBJH2jApcRrQEag= =zq+2 -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore. cant reproduce it
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, i had doubled checked any procedure with usrmgr with smb pdc ldap on suse 9.3 latest stable samba version 3.20 from suse so i have no failures with create user, delete user, create groups, delete Groups, and add/del users to group so i am total happy. Are you sure about this failure, i cant reproduce it Regards Gerald (Jerry) Carter schrieb: | ok Folks | | I've tried but cannot reproduce this. The REG_CREATE_EX | failure is during a domain logon from Windows XP. The | client is trying to create | | [System\CurrentControlSet\Control\Terminal Server\ | DefaultUserConfiguration] | | I can fix this, but it appears to have nothing to do | with user manager. Until I get those logs or a faw | network sniff of the connection failure, I'm stuck. | | | | | | cheers, jerry | | - -- Mit freundlichen Gruessen Best Regards Robert Schetterer robert_at_schetterer.org Munich / Bavaria / Germany https://www.schetterer.org \** \* gnupgp \* public key: \* https://www.schetterer.org/public.key \** -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFy2lb0iqzJq+0MgRApkvAJwP0HEWRDkduuKZCqd5a1YLGew9oQCePLUn foiEtfxgTJTSApX4oW12So0= =XJ94 -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Gerald (Jerry) Carter wrote: failure error though. I've also gone ahead and added the registry key to the Samba's registry.tdb file in the patch posted at http://www.samba.org/samba/patches/ The only error message in the samba logs while joining the 3.0.20 samba domain with XP SP2 is now: [2005/09/01 18:55:09.745874, 0, pid=26389] rpc_server/srv_samr.c:api_samr_set_userinfo(786) api_samr_set_userinfo: Unable to unmarshall SAMR_Q_SET_USERINFO. Without the patch http://samba.org/samba/patches/regcreatekey_winxp_v1.patch it was: [2005/08/09 18:45:07, 0] rpc_server/srv_samr.c:api_samr_set_userinfo(786) api_samr_set_userinfo: Unable to unmarshall SAMR_Q_SET_USERINFO. [2005/08/09 18:46:03, 0] lib/util_sock.c:get_peer_addr(1222) getpeername failed. Error was Transport endpoint is not connected [2005/08/09 18:46:03, 0] lib/util_sock.c:get_peer_addr(1222) getpeername failed. Error was Transport endpoint is not connected [2005/08/09 18:46:03, 0] lib/util_sock.c:get_peer_addr(1222) getpeername failed. Error was Transport endpoint is not connected [2005/08/09 18:46:03, 0] lib/access.c:check_access(328) [2005/08/09 18:46:03, 0] lib/util_sock.c:get_peer_addr(1222) getpeername failed. Error was Transport endpoint is not connected Denied connection from (0.0.0.0) [2005/08/09 18:46:03, 0] lib/util_sock.c:write_data(554) write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer [2005/08/09 18:46:03, 0] lib/util_sock.c:send_smb(762) Error writing 5 bytes to client. -1. (Connection reset by peer) [2005/08/09 18:50:21, 0] rpc_server/srv_pipe.c:api_pipe_bind_req(981) Attempt to bind using schannel without successful serverauth2 [2005/08/09 18:50:26, 0] rpc_parse/parse_prs.c:prs_mem_get(533) prs_mem_get: reading data of size 4 would overrun buffer. [2005/08/09 18:50:26, 0] rpc_server/srv_pipe.c:api_rpcTNP(1572) api_rpcTNP: winreg: REG_CREATE_KEY_EX failed. Thanks a lot! der tom -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore. cant reproduce it
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Robert Schetterer wrote: | Hi Folks, | | i had doubled checked any procedure with usrmgr | with smb pdc ldap on suse 9.3 latest stable samba version 3.20 from suse | so i have no failures with create user, delete user, | create groups, delete Groups, and add/del users to group | so i am total happy. | Are you sure about this failure, i cant reproduce it I'm in the same boat. Everything works for me. But the RegCreateKeyEx() is real. I've seen it on a domain logon from a Windows XP client. So whether or not the usrmgr.exe failurea are related, this was still a bug. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFzX7IR7qMdg1EfYRAgXBAKCyjVvP/rQMslM9a/qCkLdsARnEygCfTQGb x47d/1Yc0zmRUTwxqbZqluk= =tGiS -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thomas Bork wrote: | Gerald (Jerry) Carter wrote: | | failure error though. I've also gone ahead and added | the registry key to the Samba's registry.tdb file in | the patch posted at http://www.samba.org/samba/patches/ | | The only error message in the samba logs while joining | the 3.0.20 samba domain with XP SP2 is now: | | [2005/09/01 18:55:09.745874, 0, pid=26389] | rpc_server/srv_samr.c:api_samr_set_userinfo(786) | api_samr_set_userinfo: Unable to unmarshall SAMR_Q_SET_USERINFO. That's normal. It's an unsupported info level and has been there for a while now. Glad the other part worked out ok. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFzaeIR7qMdg1EfYRAukEAJ9F0ke87AMLn/FIr4Y6/BTvNkrCJwCdFBfc jBVUmcI2TrYTcc6MTezasjE= =MsYL -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
Hi, my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 (I get it from ftp.sernet.de). I've tried to start srvmgr: same result! it says: «Il servizio Server non è avviato» - I can translate in: «The service Server is not start». There are some strange randoms errors on smbd (but not when usrmgr e srvmgr starts): Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE handler Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, effective(0, 0), real(0, 0)] smbd/notify_kernel.c:kernel_notify_init(224) On other way samba is working better than old one. thanks. Il giorno gio, 01/09/2005 alle 06.43 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 ok Folks I've tried but cannot reproduce this. The REG_CREATE_EX failure is during a domain logon from Windows XP. The client is trying to create [System\CurrentControlSet\Control\Terminal Server\ DefaultUserConfiguration] I can fix this, but it appears to have nothing to do with user manager. Until I get those logs or a faw network sniff of the connection failure, I'm stuck. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFulZIR7qMdg1EfYRArG8AKC4ciUg01uELfBdcSbbZKrF+9kD3ACeP7SW 3sG3s43tc1vrKj/5VfzPe+Q= =HMRV -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | Hi, | | my test system is a w2k server. my server is a SLES8 with Samba 3.0.20 | (I get it from ftp.sernet.de). | | I've tried to start srvmgr: same result! | | it says: «Il servizio Server non è avviato» - I can translate in: «The | service Server is not start». | | There are some strange randoms errors on smbd (but not when usrmgr e | srvmgr starts): | | Sep 1 20:44:41 provtvlp smbd[7699]: Failed to setup RT_SIGNAL_LEASE | handler | Sep 1 20:44:41 provtvlp smbd[7699]: [2005/09/01 20:44:41, 0, | effective(0, 0), real(0, 0)] | smbd/notify_kernel.c:kernel_notify_init(224) | | On other way samba is working better than old one. So I'm confused. What is not working in 3.0.20 after applying the patches at http://www.samba.org/samba/patches/ ? cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDF1H/IR7qMdg1EfYRAvxqAKCDe/LbKWHsLNLOk9q+sok4hk3TfACffTSM SQZC1Yb/ducNZ3YIs18y6uY= =xK/A -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
On Wed, Aug 31, 2005 at 03:49:13PM +0200, Umberto Zanatta wrote: I've upgraded my system at Samba 3.0.20 (SLES 8) bacause of some errors on winbind and Windows 2003. Now, usrmgr.exe doesn't work anymore. It reports: «procedure number is out of range - Do you want to administrate another domain?» USRMGR has been working for 3 years; I've made all upgrades on Windows 2000, but the results it's the same. Any Idea? Samba user/system database content loss during the upgrade. Cheers Geert Stappers -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | I've upgraded my system at Samba 3.0.20 (SLES 8) bacause | of some errors on winbind and Windows 2003. | Now, usrmgr.exe doesn't work anymore. | | It reports: «procedure number is out of range - Do you want to | administrate another domain?» | USRMGR has been working for 3 years; I've made all upgrades | on Windows 2000, but the results it's the same. You're going to have to check the Samba logs for exactly what failed. This was working last time I checked (in the recent weeks). cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFcnZIR7qMdg1EfYRAvkxAJ9znDVYbW2M6MoeS6AUzoxh46Ee4gCgpm+M o9SeC1oeXMQgvRGHNV6e9H0= =Afvk -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
This is the log about usrmgr. Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, effective(0, 512), real(0, 0)] rpc_parse/parse_prs.c:prs_mem_get(533) Aug 31 18:26:55 provtvlp smbd[17237]: prs_mem_get: reading data of size 4 would overrun buffer. Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, effective(0, 512), real(0, 0)] rpc_server/srv_pipe.c:api_rpcTNP(1572) Aug 31 18:26:55 provtvlp smbd[17237]: api_rpcTNP: winreg: REG_CREATE_KEY_EX failed. Thank you. Il giorno mer, 31/08/2005 alle 10.16 -0500, Gerald (Jerry) Carter ha scritto: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | I've upgraded my system at Samba 3.0.20 (SLES 8) bacause | of some errors on winbind and Windows 2003. | Now, usrmgr.exe doesn't work anymore. | | It reports: «procedure number is out of range - Do you want to | administrate another domain?» | USRMGR has been working for 3 years; I've made all upgrades | on Windows 2000, but the results it's the same. You're going to have to check the Samba logs for exactly what failed. This was working last time I checked (in the recent weeks). cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFcnZIR7qMdg1EfYRAvkxAJ9znDVYbW2M6MoeS6AUzoxh46Ee4gCgpm+M o9SeC1oeXMQgvRGHNV6e9H0= =Afvk -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] USRMGR.EXE doesn't work anymore.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Umberto Zanatta wrote: | This is the log about usrmgr. | | | Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, | effective(0, 512), real(0, 0)] rpc_parse/parse_prs.c:prs_mem_get(533) | Aug 31 18:26:55 provtvlp smbd[17237]: prs_mem_get: reading data of | size 4 would overrun buffer. | Aug 31 18:26:55 provtvlp smbd[17237]: [2005/08/31 18:26:55, 0, | effective(0, 512), real(0, 0)] rpc_server/srv_pipe.c:api_rpcTNP(1572) | Aug 31 18:26:55 provtvlp smbd[17237]: api_rpcTNP: winreg: | REG_CREATE_KEY_EX failed. | | Thank you. Seriously? ok. I'll fix that up. Might be later this week. I'll post a patch once I'm done. cheers, jerry -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDFd6PIR7qMdg1EfYRAl+JAJ9TEpPUHW26rm0/gBHSw/NvqMzhQwCfT8qy dTvq/Hxm6iTM3m7jeRWFD5k= =G0R0 -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
