SD FS: 89 CSX-VNT #7
I guess the time has come to send this car to someone else! The car has been sitting under a cover for 4 years, and I can't bring myself to put another motor in (I'll want to keep it). Car is non-wide tire, non-recaro car.. but does have big tires on it. Tires have 200 miles on them, all the fiber rides are there - only one center cap though. Car has 105,000 miles.. motor is new - drawback - the oil pump went bad. BRAND new VNT turbo, rebuild head, forward motion cam, injectors, underdrive, etc... I have spare block from another CSX - I would recommend rebuilding the block. The car DOES have the front airdam.. has two cracks. Paint is really good, except the front airdam. Have new decals from positive impressions, new windshield, new KYB's, also have a Stage II SMEC for it. I'm not looking to get rich off the car, I need the garage space - and to finance another project a little. Come get it, and all the stuff that goes with it - including the cover... will not ship (will help load) for $3500 or reasonable offer . The stand out bad things about the car - other than not running is the window felts are sort of shot, the airdam, and the tinted windows ... doesn't look good in the back window. It was originally a Texas car... so there is NO (absolutely none) rust. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD Starter died need part # 86 GLHS
Hi All Thanks for all the info. The starter on my 86 GLHS has TURBO written on it? I've haven't pulled it yet but I can see it has TURBO written (sticker) on the case. So it must be different then a N/A Omni. I'm thinking it only came on Turbo GLH. Roy 86 GLHS #200 81 Fiat Spider LE #501 81 Fiat X 1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD WTB: T-III wiring harness
I'm looking for a T-III wiring harness in good shape. If anyone has one they would like to get ride of email me personally. Thanks Mike ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD Starter died need part # 86 GLHS
The starters are all the same. -Bryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Thursday, November 04, 2004 9:29 AM To: [EMAIL PROTECTED] Subject: Re: SD Starter died need part # 86 GLHS Hi All Thanks for all the info. The starter on my 86 GLHS has TURBO written on it? I've haven't pulled it yet but I can see it has TURBO written (sticker) on the case. So it must be different then a N/A Omni. I'm thinking it only came on Turbo GLH. Roy 86 GLHS #200 81 Fiat Spider LE #501 81 Fiat X 1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD Starter died need part # 86 GLHS
I had thought the turbo units had a little more insulation in the solenoid and/or armature to deal with the extra heat? Stefan Mullikin Portland, OR Co-Founder PNW-SDAC http://www.pnw-sdac.org 1980 Fiat X-1/9 1984 Dodge Rampage 2.2 1987 Dodge Daytona Shelby Z 1987 Shelby CSX #106 1988 Shelby CSX-T #3 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bryan Lugert Sent: Thursday, November 04, 2004 4:05 PM To: [EMAIL PROTECTED] Subject: RE: SD Starter died need part # 86 GLHS The starters are all the same. -Bryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Thursday, November 04, 2004 9:29 AM To: [EMAIL PROTECTED] Subject: Re: SD Starter died need part # 86 GLHS Hi All Thanks for all the info. The starter on my 86 GLHS has TURBO written on it? I've haven't pulled it yet but I can see it has TURBO written (sticker) on the case. So it must be different then a N/A Omni. I'm thinking it only came on Turbo GLH. Roy 86 GLHS #200 81 Fiat Spider LE #501 81 Fiat X 1/9 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD Alternator Options for 2.2 Turbo's 136 amps.
Here you are. Factory replacement alternator for our 2.2 and 2.5's is the following numbers Lester Number (any place should know what that means) 13280, 13304, 13308, 13313 That is 120 amp and a direct bolt in replacement. This alternator has an 8mm hole To get the 136 amp you have to get Lester Number 13742 The only change you will need to make is you have to get a shim to go inside the mounting ear. (That part is discontinued, but I might have a guy make a few) This alternator has an 11mm hole The 136 Amp alternator can be found in the following vehicles: 1997-1998 Dodge SUV, TRUCKS, VANS with 3.9, 5.2, 5.9, 8.0 engines. 1997-1998 Jeep Grand Cherokee with the 5.2, 5.9 -Bryan -Original Message- 136 amp? I will get all the correct information tomorrow. It involves getting a 136 amp alt from another Dodge application and then adding a spacer to the mounting ear. I believe the mounting ear an our cars is 8mm and the one that I know works is 11mm. Anyway, I can get those spacers really cheap. -Bryan ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD FS 1993 IROC R/T
Please e-mail me at [EMAIL PROTECTED] I have sold my '92 IROC Shelby, and as soon as the check clears, I will have to list my '93 IROC R/T on eBay. I may list the '93 IROC R/T on eBay as early as this weekend. I have finally found a 4x4 diesel pickup truck which I'm sending a deposit for, so I will need to have some serious cash fast. This post is to serve two functions: #1) To give some early warning so that potential buyers can gather funds, #2) Hopefully sell it before it hits eBay (saving me $80 in eBay fees.) IMPORTANT: THE CAR WILL INCLUDE THE WHITE 16 NINJA WHEELS, NOT THE CHROME RIMS IN THE PICTURES. There were only 211 IROC R/Ts made in 1993. ONLY 17 WHITE ones were made. Exterior is in great shape with the top surfaces needing refinished. NO RUST. Light grey interior is in excellent condition. The car runs great but may either need a turbo or converter. The boost comes on slow and feels funny... but the car doesn't smoke oil at all. The O2 wires recently fried (but have since been repaired), so I don't know if the car ran rich for a while and clogged the converter (it feels like the exhaust is restricted,) or if it is just the turbo on its way out. Brakes feel good, car runs cool (below 1/2 on temp guage), doesn't have any leaks that I know of. I just took it on a 200 mile trip with absolutely no problems. No vacuum leaks, no overboost, top end is very quiet as is the bottom end, tranny shifts great, clutch feels good, car has 2-1/2 exhaust and Accel Super Stock wires. Great car. I'm asking $4,200 NEGOTIABLE (very negotiable at this point), so make me an offer. I *may* be interested in partial trades as well. Again, I prefer private e-mails to [EMAIL PROTECTED] Thanks, Jeff SW Ohio ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Re: SD 1992 Acclaim low beam headlamp failure
My son replaced a fuse and now his headlight works. Thanks to everyone who suggested checking the basics, since I assumed there was a single fuse which must be working because the other headlight was. Being able to share even simple information very quickly via the Internet is so beneficial. Thanks !! Jeff Page ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD NEW control arm bushing project
I would like to have answers and I know some of you might know. Please look here for the question. http://www.polybushings.com/pages/a-arms.html Johnny Spiva PORTLAND, OREGON Selling Polyurethane parts for your FWD Mopar/Shelby http://polybushings.com _ Dont just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/ ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD Any interest? custom interior panels for: (2 door L body)
Im heading up a group purchase for a FULL TRIM piece replacement that has provisions for two 2 1/16 gauges... heres a few pictures of my home made one.. _http://www.hometown.aol.com/chargerturbo/images/image.jpg_ (http://www.hometown.aol.com/chargerturbo/images/image.jpg) _http://www.hometown.aol.com/chargerturbo/images/closeupboost.jpg_ (http://www.hometown.aol.com/chargerturbo/images/closeupboost.jpg) The group buy piece will have the appropriate factory like texture.. This piece will fit ALL of the 2 door L body cars and trucks ranging from 1979 - 1987 Charger, Charger 2.2, Shelby Charger/GLHS (turbo and non-turbo), Rampage, Rampage 2.2, DC Rampage, Omni O24, Horizon TC3, Scamp, Scamp GT, Detomasso O24, Tourismo, Tourismo 2.2, Cuda 2.2.. did I miss any? as for cost, this isnt in stone yet because I havent sent the stock trim for the estimate.. they said that full trim replacment pieces start at about $39.. So my HIGH estimate $50 each... They will come in a factory textured look but in black, factory colors should be available with the proper interior samples.. I have charcoal grey (Shelby Charger/GLHS stock color) and burgandy (from my Rampage) I mite need some samples of the odd colors like blue, beige or brown sence I havent seen those colors in too many cars to get samples from.. Other Interior colors are easy to match, so thats not an issue and you could just go with blackSo this is what im coordinating and shootin for.. If your interested, just email me [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) with the subject title Group Buy In the email please include: your first AND last name your telephone number your email address and how many you would like to purchase.. example: == subject: Group Buy Jay Silentbob (555) 867 - 5309 [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) Id like (2) == Then all you have to do is send it to my email address [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) This places you on a list im keeping track of.. When the project is a go, I'll email or call you so you can send the payment to me so I can forward a mass payment to the company (Lotek) that will be producing these.. This will require some time and patience.. They currently have other projects ahead of ours and this could take about or up to 2 - 2 1/2 months approximatly.. I've been around the lists (team omni, sdml, rampage runners) for several years and this is my opportunity to coordinate something and make it happen.. Im not makin cent one on this project, Im just here to get the ball rollin. the post on turbododge.com for this venture is below my signature.. more pictures on there.. thanks Chris Pauluk - Modesto CA - NorCalTurboDodge 84 Rampage - _www.cardomain.com/id/pentastarturbo_ (http://www.cardomain.com/id/pentastarturbo) (or) _www.cardomain.com/id/solo2rampage_ (http://www.cardomain.com/id/solo2rampage) *CUSTOM FULL TRIM REPLACEMENT A PILLAR GAUGE PANELS* L body 2 door car truck (ie; Charger, Rampage body styles, ect.) *1979 - 1987* FULL A pillar trim replacement w/integrated dual 2-1/16 gauge housing pods _http://www.turbododge.com/forums/showpost.php?p=471503postcount=9_ (http://www.turbododge.com/forums/showpost.php?p=471503postcount=9) Contact me privately @ [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) if interested... ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
