SD> parts for sale
T-Bird turbo coupe intercooler $50 I paid $113 for this part. This type of intercooler can be retrofitted to 2.2 and 2.5 Mopars. Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 85 GLHT airbox bracket $5 used clutch and pressure plate from 1985 GLHT not bad $25 Pizza wheel 15"X6" $20 1985 T-1 log intake $15 This has some of the sensors included. 1985 turbo exhaust manifold $20 Try your own homemade porting. The most you can lose is $20. Mopar coolant upper line for 1989 2.5 mitsu (brand new) $40 I paid $50.50 for this part. Timing light Sunpro (paid $32) $25 like new cylinder head from 1988 T-1 $75 with roller cam Boost gauge $18 High flow cat 2.5 inch in and out from Don's speed shop $45 Assorted wheel center caps. Used ones and newer ones I bought for 15" pizza wheels. Fits crabs and others. Asking $5 each for used ones and $8 ea. for the nice ones. Buyer pays shipping Located in Connecticut ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> refinished Pizza wheels FS
A set of 4 refinished 15 inch, 5 lug pizza wheels from a 1985 GLHT. They have been clearcoated. Six inches wide. These wheels are beautiful and shine like new. Rim shops get about $60 each for these. I'll wholesale them out the door at a 50% discount for $120 for the set. Located in Connecticut. Pictures available. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
T-Bird turbo coupe intercooler $40 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $4 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $20 85 GLHT airbox bracket $5 Pizza wheel 15"X6" $20 1985 T-1 log intake $10 1985 turbo exhaust manifold $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $40 Timing light Sunpro (paid $32) $20 like new cylinder head from 1988 T-1 $70 with roller cam Buyer pays shipping Located in Connecticut ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1985 Bosch Fuel Pressure regulator
For sale: Brand new factory Bosch fuel pressure regulator for 1985 T-l engine. Made in Germany. High quality purchased from a Chrysler dealer for $50. Never used. Offering it for sale here before eBay listing next week. $40 shipped to the 48 states. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $60 T-Bird turbo coupe intercooler $40 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $4 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $15 85 GLHT door handle $7 85 GLHT airbox bracket $5 Pizza wheel 15"X6" $20 1985 T-1 log intake $10 1985 turbo exhaust manifold $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $40 New trans filter kit for A-413 turbo auto trans.$5 Brand new Fuel pressure regulator for 1985 T-l paid $50 at dealers$40 Timing light Sunpro (paid $32) $20 like new cylinder head from 1988 T-1 $50 with roller cam Buyer pays shipping Located in Connecticut ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1985 turbo
Used turbocharger from 1985 Omni GLHT. Worked fine when taken off car. Garrett T-l located in Connecticut. $75 shipped to the 48 United States. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $75 T-Bird turbo coupe intercooler $50 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $5 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $15 85 GLHT door handle $7 85 GLHT airbox bracket $7 1985 T-1 log intake $10 1985 turbo exhaust manifold $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 New trans filter kit for A-413 turbo auto trans.$5 1988 Turbo 1 cyl. head $75 Sunpro Timing Light $16 2.2 speed secrets book $14 1989 Haynes Repair manual for Spirit/Acclaim $8 Buyer pays shipping ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Turbo Acclaim auction ending
1989 Acclaim turbo on E-bay price reduced no reserve. Located in Connecticut. Auction ends noon Tuesday EST. New price $275 auction # 220006305592 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> E-Bay items for sale
Automatic transmission filter #220006318403 upper coolant line 2.5 mitsu #220006312727 1989 Acclaim turbo #220006305592 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $125 T-Bird turbo coupe intercooler $65 15" GLH 5 lug Pizza wheels 6" wide E-mail for pictures non a/c alt. bracket$20 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $7 85 GLH driver's side mirror $20 with remote cable, bezel 1985 Omni driver's window (glass only) $15 85 GLHT door handle $7 85 GLHT airbox bracket $7 85 Omni glovebox insert $3 1985 T-1 log intake $10 1985 turbo exhaust manifold $15 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$7 Engine Stand (brand new) HD $40 Hundreds of old car magazines ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $125 T-Bird turbo coupe intercooler $65 Very good maroon/red driver's seat for 4-door Omni(with tracks)$45 Very good two part maroon rear seat for 4-door Omni $45 Very good complete carpet for Omni/Horizon. $40 Above 3 items came from mint 24,000 mile 1987 Omni. 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $7 85 GLH pass rear door inside panel red, very good cond.$7 85 GLH driver's side mirror $25 with remote cable, bezel 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $12 85 Omni glovebox insert $4 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$9 Engine Stand (brand new) HD $40 Hundreds of old car magazines ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> "Pizza Wheels" ? (source for)
I have eleven pizza wheels for sale. One set is professionally refinished and clearcoated. One set is hand refinished. And 3 wheels are natural, all are straight and true. Pics available at [EMAIL PROTECTED] Located in Connecticut. --- Andy Fuchs <[EMAIL PROTECTED]> wrote: > Just went to put new tires on my 1985 600-ES, and > was advised one rim is > bent and won't balance. Anyone know of a source > (east coast preferred) or > have any "Pizza wheels" for sale, to fit this car ? > Thanks ! > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra Complete Garrett T-1 turbo and exhaust manifold off 1985 GLHT $125 T-Bird turbo coupe intercooler $65 Very good maroon/red driver's seat for 4-door Omni(with tracks)$45 Very good two part maroon rear seat for 4-door Omni $45 Very good complete carpet for Omni/Horizon. $40 Above 3 items came from mint 24,000 mile 1987 Omni. 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $10 pair 85 GLHT dogbone "bobble" strut $7 85 GLH pass rear door inside panel red, very good cond.$7 85 GLH driver's side mirror $25 with remote cable, bezel 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $12 85 Omni glovebox insert $4 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$9 Engine Stand (brand new) HD $40 Hundreds of old car magazines ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: turbocharger 1985
For Sale in Connecticut. 1985 T-l turbo from 1985 Omni GLHT. Worked good when removed. Still connected to exhaust manifold.$125 free shipping to 48 states. [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra T-Bird turbo coupe intercooler $75 Very good maroon/red driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut $10 85 GLH pass rear door inside panel red, very good cond.$7 85 GLH driver's side mirror $25 with remote cable, bezel 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 New trans filter kit for A-413 turbo auto trans.$9 Engine Stand (brand new) HD $40 Hundreds of old car magazines, with tests on TDs. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT door handle $8 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> WTB: RIMS and/or tires 90"Acclaim
I have a nice set of four 15 inch pizza rims from my old 85 GLHT. They were professionally refinished and clearcoated by Long Island Rim. Pics available by e-mail. They were mounted on my 1989 Acclaim turbo (also for sale). Located in Connecticut. --- Chris VanKauwenberg <[EMAIL PROTECTED]> wrote: > I'm looking for a set of wheels to dress up my 1990 > Acclaim (crab or egg shells preferrably). They > don't have to be perfect, just straight, as it is a > beater car. If possible, with a set of usable > tires. > > Thanks, > Chris > > [EMAIL PROTECTED] > > > > - > > What are the most popular cars? Find out at Yahoo! > Autos > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 T-Bird turbo coupe intercooler $75 Very good maroon driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH 5 lug Pizza wheels 6" wide several available Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH Pizza wheels 6" wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH Pizza wheels 6" wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni(with tracks)$50 Very good two part maroon rear seat for 4-door Omni $45 15" GLH Pizza wheels 6" wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 Omni driver's window (glass only) $25 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 1985 GLHT turbo support bracket $10 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15" GLH Pizza wheels 6" wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 85 GLHT airbox bracket $15 85 Omni glovebox insert $5 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15" GLHT Pizza wheels 6" wide several available 5 lug ask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 85 GLH driver's door glass $15 85 GLHT airbox bracket $15 85 Omni glovebox insert$5 1985 GLHT trans shift rod (new) $35 this is the rod on the trans itself New shift rod retainer clips for 525 trans. 3 of them$15 1985 T-1 log intake $15 1985 turbo exhaust manifold $20 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$40 34 lbs/hr set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$15 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD> how to tell if the fuel filter is clogged
--- Louis Renzo <[EMAIL PROTECTED]> wrote: > Why try to troubleshoot a fuel filter when you can > just buy a new one? We're > not talking big bucks here. 5 minutes of your time > installing it and you've > eliminated 1 more possible problem. Just take it off and try to blow through it. Buy a new one and then blow through that. You will change it. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 1989 Acclaim turbo
Located in Connecticut. 2.5 turbo with auto trans. For parts or repair. Good donor car or fix up for winter driver. CT title. Registered. Insured. Common block with turbo. Lockup three speed transmission. $400 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15" GLH Pizza wheels 6" wide several availableask for pics Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 85 GLHT airbox bracket $15 85 Omni glovebox insert$5 1985 GLHT trans shift rod (new) $35 this is the rod on the trans itself New shift rod retainer clips for 525 trans. 3 of them$15 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 34 lbs/hr set of early T-1 rods$50 Engine Stand (brand new) HD $40 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 1989 Daytona driver's manual $10 Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Very good maroon 1987 driver's seat for 4-door Omni $40 Very good two part maroon rear seat for 4-door Omni $35 15" GLH Pizza wheels 6" wide several availableask for price Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair 85 GLHT dogbone "bobble" strut$10 85 GLH rear taillight lenses $25 pair 85 GLH driver's side mirror $25 with remote cable 1985 GLHT trans shift rod (new) $35 this is the rod on the trans itself New shift rod retainer clips for 525 trans. 3 of them$15 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Ported exhaust manifold 1985 T-1 $100 Mopar coolant upper line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 34 lbs/hr set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $40 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $395 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 MP turbo Logic module $50 New L-body 2.5 inch mandrel bent cat back exhaust JRB fits Omni and Charger $100 1985 turbo flywheel $40 1988 turbo roller cam with lifters and roller rockers, valve springs $50 T-Bird turbo coupe intercooler $75 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair stock 85 GLHT dogbone strut $10 1985 T-1 log intake $15 1985 turbo exhaust manifold $25 Ported exhaust manifold 1985 T-1 $100 Mopar coolant feed line for 1989 2.5 mitsu (brand new) $45 set of 1987 T-2 injectors$45 set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $40 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $395 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual $10 1988 Sundance driver's manual $10 Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $8 Paperback book "How to avoid speeding tickets" The fast driver's handbook 290 pages by Matt Reynolds$8 ** Hundreds of old car magazines for sale the oldest is 1958 "Sports Cars Illustrated" Car Craft, Super Stock, Hot Rod, Popular Hot Rodding, National Dragster Hundreds of old car magazines for sale ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 89 Acclaim turbo&85 Omni GLHT
Located in Connecticut. 1989 Acclaim 2.5 turbo auto. $400 1985 Omni GLH turbo $750 For details and pictures e-mail [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Has anyone ever shipped GLH sideskirts and front air dam?
I shipped a GLH front airdam from Connecticut to the midwest via UPS. It cost $96.00 United Parcel Service. I constructed my own cardboard box with $10 worth of clear package tape. The sideskirts were much cheaper to ship. Vic --- David Salamone <[EMAIL PROTECTED]> wrote: > > I've got a real nice set I'm planning to sell but > wow is it long. Has > > anyone ever shipped a set? and was there anything > special about the box? > > or extra fees? > > When I was shipping Shadow bumper covers I > discovered large bulky objects > can be a challenge to ship affordably. First off use > Fed Ex and go directly > to their main location if at all possible. They're > going to measure it via a > limit of a certain amount of cubic inches (side x > width x height, etc). > > You'll have no room to spare on these so boxing them > up is not an option. > What you do to keep the size to a minimum is to > cover them in bubble wrap > from end to end. You can buy a roll of the small > bubble stuff at Office > Depot along with the clear packaging tape. You may > have to ship the sides & > front separate to meet the size criteria. Also if > you go during a busy day > (with lots of people in line) they're less likely to > notice (or care) if > it's slightly oversize. > > David Salamone > Positive Impressions > PO Box 27073 > Jacksonville, Florida 32205 > 904-388-4040 phone > [EMAIL PROTECTED] > > See the newly updated product list at > www.unleashedbyshelby.com > > * > We provide the opportunity for you to restore & > enhance the > appearance of your Shelby Dodge vehicle at a fair > price. > > We offer top quality, licensed reproduction stripe > sets for all the > "numbered" vehicles such as the 1986 & 1987 GLHS's, > 1987 to > 1989 CSX's, 1987 Shelby Lancer's and most recently > the 1989 > Shelby Dakota. Many other repro sets are available > as well. > > We also feature other "appearance improving" > products such as > Shelby oil caps, leather key fobs and the new > license plate frames. > > New products are being added all the time, give us a > call to find > out if we might have what you're looking for. Our > goal is to help > you keep your Shelby Dodge looking as great as it > performs. > > * > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Re: Does this look right?
> Brings up a trivia question, what non-intercooled > turbo cars did NOT have > the TURBO Electronic Fuel Injection chrome fender > emblems? If anyone is looking for this emblem I have a set for sale. $10 plus shipping. [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Slightly melted pistons!!
I wouldn't use Scotch Brite. The material remains on parts and works it's way to your bearings. Vic --- Marc Medina <[EMAIL PROTECTED]> wrote: > If they are forged and you're melting the tops > you've got some SERIOUS > problems. I'd take a careful look at the computer > you're using, and make > sure the head isn't damaged/warped causing the head > gasket problems. If > you're not using the ARP head studs yet, this would > be the time to get > them - as well as a Cometic head gasket. > Thanks, > Marc Medina > http://www.geocities.com/mcm95403 < updated > 4/25/05 > - Original Message - > From: "Geyer, Michael R (PPT)" > <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, May 25, 2005 5:52 AM > Subject: SD> Slightly melted pistons!! > > > > Finally got the head off again last night, and > encountered something > that's > > troubling me. Both #1 and #4 Pistons have a small > part of their tops > > melted, about the size of an almond and right by > the discharge valve > > relief's. It has the texture of porous stone, > not very deep. It looks > > almost like cavitation wear, which makes sense > because it's right at the > > water jackets where the headgasket blew. It blew > just about 2 days after > a > > put a new MP one on, popped exactly where the last > one did. Apparently I > > was too lean running 21 psi of boost, strange > thing is my EGT probe is in > #4 > > and it never got above 1200. Maybe it didn't get > a chance too. Cylinder > > pressure must of been fairly high, because the > steel rings on 1 and 4 are > > now somewhat egg shaped. > > > > So the question is should I just leave the pistons > alone and put it back > > together? Should I take some sand paper and > smooth it out, it's about a > > 64ths deep. I might be able to scotch bright them > smooth. Should I > really > > replace those two pistons? They are .020 over JE > forged units, and there > > not very old. So if I have to replace two, I > should probably replace them > > all and I'd hate like hell to replace them all and > have to rebalance > > everything again. Not to mention the rest of the > crap that goes along > with > > that, especially on a rebuild that's not more then > 2000 miles old. > > > > I'm just worried about that area of the pistons > causing miss-fires or > > detonation. > > > > I've already purchased 53 lb. inj's., new knock > sensor, and EGT probe to > > help keep this from happening again. Any further > detail required to > answer > > these questions, please let me knowI will > provide. > > > > Another thing...sorry, does a Cometic head gasket > need any special finish > to > > seal? > > > > Thanks for the help, > > Mike Geyer > > 87 Shelby Z > > 93 Shadow ES > > 72 Coronet (FOR SALE...$1,200 obo) Solid but > needs some help. > > 96 BMW 328is > > > > > ---REMOVE-FOOTER-WHEN-REPLYING > > > Questions? Visit http://www.sdml.org/ > > > > To be removed, visit > http://www.sdml.org/pages/leave.html > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Wheel hop...
--- Brian Schulteis <[EMAIL PROTECTED]> wrote: > > Anyways.. I've heard of shimming one side of the > sway bar to prevent > wheel hop. Can't remember which side they usually do > that to, I've > never tried it. > That was a traction trick pioneered by the late Gus Mahon on Slugmobile. A plywood block was put under the driver's side swaybar and mounted with long bolts. This shifted weight to the passenger's side front wheel. A good quality air shock in the left rear was also blown up for racing. This also shifted weight to the passenger's front wheel. May Gus rest in peace, here's the link: http://home.earthlink.net/~turbogus3/traction.html Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1989 Acclaim turbo in CT
1989 Plymouth Acclaim 2.5 turbo automatic. For parts or restoration. Whole car. Connecticut title. All stock. Never modified. Maroon/maroon. 105,000 miles. Was driven daily until fuel pump quit April 6, 2005. Power steering leak. $400 and tow it home. I am the second owner. Located in Northeast Connecticut. for pics e-mail off list at; [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: 1989 Acclaim turbo
Located in Connecticut. Asking $500. Not running due to bad fuel pump. Has power steering leak. 2.5 turbo automatic. CT title. For parts or restoration. Whole car. For pics e-mail [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale on eBay
parts on eBay Motors 1989 turbo coolant return tube Item# 4542994501 ported G-head and exhaust manifold Item# 4542996264 cone air filter Item# 7967957885 t-bird intercooler Item#7967966264 automatic trans filter Item# 4542994985 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Code 22 wont go away
--- [EMAIL PROTECTED] wrote: > Replaced the coolant temp sensor with another and > it came back.Replaced with a new one and it came > back.Whats next?What could be causing this?? > Bill, I'm not sure this applies to your car, but: I once had a 1988 Lancer that was converted to a 1987 T-II engine by Gus Mahon. Using the 1988 electronics, it did not have a charge temp sensor. The code (coolant sensor) kept coming back even though I replaced the coolant sensor with known good ones. After much headache, Gary Donovan told me that the code is stored and does not go away. He said it has to be cleared at the dealer or at home with a high tech scanner device. So I brought the car to Gary and he cleared it with one of his devices. It never came back after that. At the same time I found a loose wire to the SMEC that I fixed. So I really can't say for sure which correction (or if both) got rid of the code. Hope this helps. Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> New member looking for a turbo omni 5 spd in VA.
--- Mark O'Connor <[EMAIL PROTECTED]> wrote: > New member looking for a turbo omni 5 spd in VA. > My name is Mark. I would be willing to drive a few > hundred miles to get it. > I might consider other turbo dodges (5 spd), what > have you got? > Currently looking at the under $1000 range. I have one up here in Connecticut. Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts FS
fs on eBay Ported G head and exhaust manifold Item 4539779728 coolant return tube #4539585615 trans filter #4539585499 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> RE: Pay Pal
--- Lou Renzo <[EMAIL PROTECTED]> wrote: > Several months ago my American Express card was > charged $250 to Pay Pal and I > don't even have an account! I don't use Pay Pal and > now for sure I never > will! Nor do I. Recently I sold a MP turbo computer on eBay. The buyer tradersunlimited Greg Lahaise from Canada refused to pay because I did not have paypal. He did not read the bidding terms did not read shipping terms and I suspect he had an automatic bidding program in use. Nevertheless he left negative feedback and contacted the next highest bidder and wanted him to send money for something he didn't have or pay for. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS: Parts on eBay
Several parts listed on eBay for sale: Ported head and exhaust manifold package: item # 4532234252 1988 intake assy. item # 4532138023 auto trans filter item # 4532114859 89 mitsu 2.5 coolant tube item # 4532108520 nice pair of pizza wheels and tires item # 7958580583 1988 "turbo" fender badges 45131508499 T-Bird intercooler item #7958620420 1989 2.2 automatic trans n/a computer 4532110670 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
For Sale: parts currently on e-bay motors: 1989 MP computer for 2.5 turbo, auto trans item#4528329679 1988 turbo one piece intake manifold (complete) item # 4528469954 Thanks, Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD> My thoughts on the SDAC
--- Jason Arroyo <[EMAIL PROTECTED]> wrote: > Certainly the published newsletter could be made for > pennies. << Balogna! What about postage? ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Code 13, why???
Check for vac hose leaks? Also ground wires? --- Brian Schulteis <[EMAIL PROTECTED]> wrote: > Strange problem here... My Daytona is popping up an > error 13. Map > sensor problem. Seems to be BARO related, as I put a > meter on the baro > solenoid, and it never dips. Seems like the problem > happens right when > the computer would be checking the baro. Start it > up, run for a > minute, maybe less, and then the computer triggers > the error and the > light comes on. I know I should get a code 37 not a > 13 with a baro > problem, but the map sensor is reading just fine. I > can backprobe the > pins on the SMEC connector. The map sensor voltage > is exactly what it > should be. And the baro voltage never drops like it > should when the > computer checks, not even when first turning on the > key. > Suggestions? Or just tell me like it is.. It's a > smoked transistor on > the SMEC and that SMEC is dead unless I can > miraculously figure out > which one it is. > > -- > Brian J. Schulteis > Bremerton, Washington > '85 Shelby Charger (resto project 25% done) > '88 Chrysler Lebarron Convertible (J body) > '88 Daytona Pacifica (Intercooled 2.5L daily driver) > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> T1 Woes
H. Fuel filter clogged? Bad HEP? --- Home <[EMAIL PROTECTED]> wrote: > beatrice_email_stationaryI have Lebaron w/ a T1 > that has developed a wierd > problem. > > It starts fine then runs for about 10 minutes and > the sputters and dies. If > I try to restart it just cranks. If I let it sit > for a couple of hours, it > will start and repeat the same process. > > THe only code I am getting is 12. > > > ThanksTim > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> Dyno Testing in Eastern MA
You could try New England Dyno at 7 Lenora St. in Worcester, MA. Check out our website New England Chapter SDAC. Vic --- Robert Carita <[EMAIL PROTECTED]> wrote: > Does anyone know of a facility that will conduct > dyno testing on one > of our cars? I'm interested in what this type of > test cost and what > you get in the end...a print out of WHP and Torque? > How brutal are > these tests? > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
RE: SD> Cliff Sebring is he still into SD's ?
Does he still have that blue 63 Dodge wagon, a 440? Vic --- Brad Pennington <[EMAIL PROTECTED]> wrote: > I know awhile back he had a rail w/ a big block > Mopar on it. His boy Flea has a SRT4 and posts on > turbododge.com occasionally. > > > > Brad Pennington > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> problems and questions
--- Marc Medina <[EMAIL PROTECTED]> wrote: > > As for the A/F monitor, it reads a steady value > about 1% of the time. The > rest of the time - even just cruising at a steady > state - the bars are going > up and down from 3 to 8 (scale of 1 to 10)<< You didn't say what brand A/F monitor you have. But with a Cyberdyne the above described behavior is not abnormal. > At idle, > only the bottom 2 bars > are lit. << This is not normal. At idle with engine fully warmed up, it should be bouncing up and down too. Check your ground wires. Any fault codes? Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> FS:1989 Daytona Shelby
For Sale in Connecticut. 1989 Daytona Shelby Turbo 2 intercooled, 5-speed, Red, Runs and drives. Never modified. All stock. Sunroof. Rear disc brakes. Newer fuel pump. All parts are there. Lost title. Asking $550 Good for T-2 conversion. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Large items for sale
Everything located in Connecticut 06239 Shipping is extra Delivery possible to New England states 1985 black GLH hood not turbo $45 Engine Stand (brand new) HD$45 one 1986 C/S 6.5 crab wheel gold paint flaking $25 1985 T-1 engine block $45 1984 T-1 short block $75 Red Omni drivers seat (one small wear spot) $25 Red Omni seat good back rip in bottom$15 1989 Plymouth Acclaim 2.5 turbo registered and driven daily 102,000 miles $895 1985 Omni GLH turbo Black/Red registered and driven on weekends Interior is semi gutted Curb weight 2,250 pounds $995 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Pizza wheels FS
Located in Northeastern Connecticut. No center caps, no pictures. 5 lug and 6 inch wide. set#1 Four professionally refinished pizza wheels with clearcoat. Nice shape with no curb rash. They have tires mounted on them with some tread. $175 set#2 Four pizza wheels with newer Cooper Cobra tires mounted and spin balanced and new valve stems. I hand sanded these wheels but did not clearcoat them. Tires have excellent tread and are 205/60/15. $425 set#3 Four pizza wheels in various condition. Two are pretty good and two are old looking. Two of the tires are pretty good with plenty of tread and two have cracks and are old but have good tread and hold air. $125 set#4 A pair of professionally refinished pizza wheels with 205/50/15 General tires in good shape. The wheels are clearcoated and excellent. $125 #5 one lone pizza wheel with one good 195/50/15 tire $45 set#6 pair of 15 inch 6.5 inch wide crab wheels from a 1986 Daytona C/S. Painted silver with 2 nice snow tires and plenty of thick tread. size 195/60/15 steel belted Mud and Snow. These things work well in deep snow. $100 note: will not dismount any tires. shipping extra [EMAIL PROTECTED] ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> cheap Garrett turbo to rebuild (on Ebay)
I took this stock T-1 off my 1985 Omni GLHT to rebuild. I found another and will sell this on Ebay. Bid starts at $24. Shipping should be $15 or less from Connecticut. With rebuilders charging $150 for a core charge you can save over a hundred dollars. It is boxed up ready for shipping. No pictures and no Paypal. Pay by money order, Western Union for fast delivery. Pay by personal check but wait for it to clear my bank. Ebay motors Parts- search for item # 7922308642 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> smoke question
My son bought a 1989 Daytona Shelby T-2. The car normally doesn't smoke. But at idle when the oil fill cap is removed it smokes white out the exhaust and from behind the engine. It smells like burnt oil. Shut it off and replace the oil cap, start it up again and the smoke goes away. Anyone seen this before? Any idea what is going on? Thanks, Vic ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> 89 CSX FS in Eastern MA
Can't tell in the photo where the brick damaged the hood. Did that happen after the photo was taken? --- Eric Simpson <[EMAIL PROTECTED]> wrote: > Hi guys, still trying to sell my CSX, more info > here: > > http://www.turbododge.com/forums/showthread.php?p=465862#post465862 > > Make me an offer! > > Eric Simpson - 89 CSX #212 > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra 1985 black GLH hood not turbo hood $50 Silver grey Omni rear hatch no wiper no brake light$50 T-Bird turbo coupe intercooler $75 Stock transfer gears 413 (auto) $15 stock 85 GLHT dogbone strut $10 New rod linkage (Mopar) for 525 main transverse rod $35 1985 T-1 log intake $10 1985 throttle body $15 1988 throttle body $20 1985 T-1 fuel rail and harness $20 1985 T-1 Garrett turbo with exhaust manifold$150 1985 T-1 turbo needs rebuild $40 1987 T-2 Garrett turbo with T2 exhaust manifold $185 brand new MP computer for 1989 2.5 turbo automatic (in box)$175 Mopar coolant feed line for 1989 2.5 mitsu (brand new) $50 1989 2.2 n/a automatic computer $20 set of T-2 injectors (used) $60 set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $45 Ported G-head by M^ racing. Pressure tested and new valve job. Decked and never run. $375 Ported 1985 exhaust manifold by M^ port matched to above head $100 one 6.5 crab wheel $20 Literature: Sport Compact Car January 2002 featuring the 86 SC of Chris Pace half page article describes buildup $5 Grassroots Motorsports Sept 2003 article by Bill Cuttitta 8 pages of turbo Dodge info $10 High Performance Mopar January 2001 article on 25 tech tips for FWD TD by Greg Rager $10 1999,2000, and 2001 Mopar Performance catalogs. $2 each 1989 Acclaim driver's manual $7 Haynes- 84 thru 89 Daytona Laser repair manual $9 Chiltons 1984-5 Daytona Laser Repair and tune up guide$7 Chilton's guide to Turbocharged Cars, Trucks, Motorcycles also has installation kit guide 1984 by Mike Stone 250 pages $7 Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang $7 Paperback book "How to avoid speeding tickets" The fast driver's handbook 290 pages by Matt Reynolds $7 *** Hot Rod magazines hundreds of old car mags for sale. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> 1985 Garrett T-1 core FS $50
FS: 1985 T-1 taken off a 1985 GLHT to rebuild. Considering some vendors charge $150 for core charge this is a good deal. All boxed up and ready to ship, no waiting once your money order is received. Total price including shipping $50 no paypal ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> Large items for sale
Large items for sale Everything located in Connecticut Prefer to have items picked up but delivery possible within 100 miles GLH front airdam $75 1985 black GLH hood not turbo $45 Engine Stand (brand new) HD$45 one 1986 C/S 6.5 crab wheel gold paint flaking $25 Pair of 6.5 crab wheels same as above but repainted silver with mounted and balanced 195/60/15 high traction M&S tires (good tread) These will pull you through the storms $120 1985 T-1 engine block $45 1984 T-1 short block $75 Red rear seat (both parts) Perfect condition from 26,000 mile Omni $50 Red Omni drivers seat (one small wear spot) $25 Red Omni seat good back rip in bottom cloth $10 Red Omni carpet with backing$40 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra GLH front airdam $75 1985 black GLH hood not turbo $50 T-Bird turbo coupe intercooler $70 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $20 pair stock 85 GLHT dogbone strut $10 1985 T-1 log intake $10 1985 T-1 turbo needs rebuild $25 Ported exhaust manifold by M2 1985 T-1 $100 brand new MP computer for 1989 2.5 turbo automatic (in box)$175 Mopar coolant feed line for 1989 2.5 mitsu (brand new) $45 1989 2.2 n/a automatic computer $20 set of T-2 injectors $50 set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $45 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $375 one 1986 C/S 6.5 crab wheel gold paint flaking$20 set of 4 15" pizza rims redone by Long Island Rim ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> magazine test articles
For Sale: Prices do not include shipping from CT 06239 These magazines have been well taken care of since new, well stored all these years in a heated room and are in very good condition. No musty smell! Motor Trend October 1984 All the new for 1985 cars. F-body twins and 210 hp Mustang. This is a beautiful issue with a large color center ad with Carroll himself showing a dual carb 2.2 direct connection engine, the "no more Mr. nice guy" 2 page ad for the GLHT, a 2 page color ad for the 85 Daytona and an article on the 85 LeBaron turbo. Also a road test of the Shelby Charger turbo. $5 Motor Trend November 1987 4 page road test article on the 1987 Chrysler LeBaron Convertible turbo. Beautiful color ad of the 88 Shelby Z Daytona. Color ad of the Conquest. Also this issue has tests of the Honda CRX and the Toyota MR2 supercharged. $4 Motor Trend February 1989 Tests of the 89 Spirit ES turbo and the 89 Acclaim V-6. The 89 T-bird super coupe is featured as car of the year. $3 Motor Trend October 1989 All the new 1990 cars. Nice pic of TC by Maserati. Review blurbs of all the 90 Mopars. $3 Motor Trend April 1986 Nice article "American GT shootout" running the 146hp 1986 Daytona C/S against the 210hp Pontiac Trans Am Firebird. Intro of the 86 Dodge Dakota. 2 page ad of the Conquest beating the Nissan 300Z and the RZ-7. Test of the Mitsu Cordia Turbo. Several photos of a white 1986 C/S. $4 Motor Trend December 1989 Road test of the 1990 VNT LeBaron convertible. Feature on exotic cars. Large article of the Mercedes 300SL and 500SL. Audi V-8 Quattro. Nice 2 page color ad of the Mitsu Eclipse AWD turbo.$3 Motor Trend December 1983 Beautiful several page color ad of the 84 Daytona, the Turbo Z, color cutaway of Daytona, color ad for the dodge 600, and a very nice color page of the Shelby Charger and Charger 2.2 ad. This issue also has tests on the Buick GN and the 84 Vette 4-spd. Also the all new CRX 2 seater and the Audi turbo 5000. $4 Motor Trend October 1988 Ok here is a test of the 1989 Dodge Spirit ES. A sidebar article shows what they call a Shelby Spirit ES with the DOHC 16 valve. This must have been one of the rare first prototypes since they rate it at only 200hp. It says that it was tweaked by Shelby performance. This is the autumn of 1988. It is the only time I have seen this prototype car in a magazine. Also nice color ad for the 1989 Daytona Shelby. Small review of the Mopar products for 1989. $4 Road & Track June 1986 Test of the 1986 Laser XT turbo $3 High Performance Mopar October 01 Four pages by Dan Foley on power porting the 2.2 cylinder head.$6 High Performance Mopar Jan 01 Four pages of FWD tech tips. 25 tips on how to make our turbo cars faster. Pictures of modifications. Well thought out article by Greg Rager $6 ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
Re: SD> logic module questions (what else could it be?)
What codes are you getting? How is the speed sensor? --- Michael Henderson <[EMAIL PROTECTED]> wrote: > A question about L-body logic modules > > I have an 87 Shelby Charger with a T1 from an 85 > Daytona. The car runs great > until you come to a stop. When you roll to a stop > the car will stall. The > revs just die down and it quits. > > The car is running the automatic Daytona logic > module. How will that effect > the performance of the car. What else could be > causing this problem? How > could I fix it? The car e-tested with flying > colours, so I know it's at least > idling and running good. Please help! > > Thanks > > Mike > > ---REMOVE-FOOTER-WHEN-REPLYING > Questions? Visit http://www.sdml.org/ > > To be removed, visit > http://www.sdml.org/pages/leave.html ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> parts for sale
Everything located in Connecticut 06239 Shipping is extra GLH front airdam $75 1985 black GLH hood not turbo $50 First Gen Talon BOV $45 T-Bird turbo coupe intercooler $70 Stock transfer gears 413 (auto) from 1988 Lancer T-1 one 53 tooth one 56 tooth $30 pair stock 85 GLHT dogbone strut $10 1985 T-1 log intake $15 1985 T-1 turbo needs rebuild $25 Ported exhaust manifold 1985 T-1 $100 brand new MP computer for 1989 2.5 turbo automatic (in box)$175 Mopar coolant feed line for 1989 2.5 mitsu (brand new) $45 1989 2.2 n/a automatic computer $20 set of T-2 injectors $50 set of early T-1 rods$50 (with pistons) Engine Stand (brand new) HD $45 Ported G-head by M2 racing. Pressure tested and new valve job. Decked and never run. $375 one 1986 C/S 6.5 crab wheel gold paint flaking$20 Literature 1989 Acclaim driver's manual Haynes- 84 thru 89 Daytona Laser repair manual Chilton's guide to Turbocharged Cars, Trucks, Motorcycles also has installation kit guide 1984 by Mike Stone 250 pages Hardcover book by Bob Tasca "You will be satisfied" owner of Tasca Ford in Providence sponsor of John Force funny car how he build his dealership and a section on the 60s funny car Mystery Mustang Paperback book "How to avoid speeding tickets" The fast driver's handbook 290 pages by Matt Reynolds ** Hundreds of old car magazines for sale the oldest is 1958 "Sports cars illustrated" Examples (Hot Rod) April 1964 complete article of the "new" 426 Hemi 64 winternationals cragar turbo on Corvair May 1964 Ford's new Mustang July 1964 Introduction of the new Barracuda AiResearch turbo Chrysler in a 55 T-bird November 1966 new car (1967)descriptions 1964 vintage Speed & Custom mag article on the Hemi engine and new Mustang (no cover) Car Craft, Super Stock, National Dragster Hundreds of old car magazines for sale ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html
SD> magazine test articles
For Sale: Various magazines in excellent to very good condition. How would you like to have a test article of your car when it was new? A list below describes what is available. Everything is for sale at price listed and that includes free shipping to the 48 states. Find your car listed below. These magazines have been well taken care of since new, well stored all these years in a heated room and are in very good condition. No musty smell! No mildew! Motor Trend October 1984 All the new for 1985 cars. F-body twins and 210 hp Mustang. This is a beautiful issue with a large color center ad with Carroll himself showing a dual carb 2.2 direct connection engine, the "no more Mr. nice guy" 2 page ad for the GLHT, a 2 page color ad for the 85 Daytona and an article on the 85 LeBaron turbo. Also a road test of the Shelby Charger turbo. $10 mailed to you. Motor Trend November 1987 4 page road test article on the 1987 Chrysler LeBaron Convertible turbo. Beautiful color ad of the 88 Shelby Z Daytona. Color ad of the Conquest. Also this issue has tests of the Honda CRX and the Toyota MR2 supercharged.$7.50 mailed. Motor Trend February 1989 Tests of the 89 Spirit ES turbo and the 89 Acclaim V-6. The 89 T-bird super coupe is featured as car of the year. $7.50 mailed. Motor Trend October 1989 All the new 1990 cars. Nice pic of TC by Maserati. Review blurbs of all the 90 Mopars.$5.50 mailed. Motor Trend April 1986 Nice article "American GT shootout" running the 146hp 1986 Daytona C/S against the 210hp Pontiac Trans Am Firebird. Intro of the 86 Dodge Dakota. 2 page ad of the Conquest beating the Nissan 300Z and the RZ-7. Test of the Mitsu Cordia Turbo.$6.00 mailed Several photos of a white 1986 C/S. Motor Trend December 1989 Road test of the 1990 VNT LeBaron convertible. Feature on exotic cars. Large article of the Mercedes 300SL and 500SL. Audi V-8 Quattro. Nice 2 page color ad of the Mitsu Eclipse AWD turbo. $5.00 mailed. Motor Trend December 1983 Beautiful several page color ad of the 84 Daytona, the Turbo Z, color cutaway of Daytona, color ad for the dodge 600, and a very nice color page of the Shelby Charger and Charger 2.2 ad. This issue also has tests on the Buick GN and the 84 Vette 4-spd. Also the all new CRX 2 seater and the Audi turbo 5000. $7 mailed. Motor Trend October 1988 Ok here is a test of the 1989 Dodge Spirit ES. A sidebar article shows what they call a Shelby Spirit ES with the DOHC 16 valve. This must have been one of the rare first prototypes since they rate it at only 200hp. It says that it was tweaked by Shelby performance. This is the autumn of 1988. It is the only time I have seen this prototype car in a magazine. Also nice color ad for the 1989 Daytona Shelby. Small review of the Mopar products for 1989. $7 mailed. ---REMOVE-FOOTER-WHEN-REPLYING Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html