A friend in MO called me a month or so ago all excited. She has had her
numerous warts cut off, burned off & administered all manner of natural
treatments to no avail, however, she tried generic brand Preparation H at
night with a glove over her hand and they finally withered away with no pain
involved. Who would have thought it?
Edith
-Original Message-
From: Jane MacRoss
To: silver-list
Sent: Sat, Mar 10, 2012 3:20 pm
Subject: Re: CS>First Batch of CS/warts
Thuja tincture soaked dressing covered with a light & waterproof tape for 6
weeks usually works & possibly Biotin will also work removing warts.
Jane
- Original Message -
From: Asif Nathekar
To: silver-list@eskimo.com
Sent: Sunday, March 11, 2012 6:01 AM
Subject: Re: CS>First Batch of CS
There are various treatments for warts which have been discussed previously
including electrical based devices. Worth a look through the archives
On 10 Mar 2012, at 17:26, CT wrote:
Thanks for the response Asif,
I did, indeed, wipe the negative electrode silver clean mid-cycle. I think,
all-in-all it was a pretty successful batch and I had my first “swallow” this
morning. I took about 1/2 ounce shot, held it in my mouth for about 5 min and
then swallowed. No immediate reactions. I have a wart on one finger that I will
be watching as sort of the “test results area.” I am generally healthy however
and wonder what sort of initial program dosage I should go on. I was planning
on 1 ounce daily (1/2 morn and 1/2 night). Any thoughts or suggestions on this?
Thanks again to all,
CT
I would decant into the final vessel and stop just before the sludge starts
pouring out.
I do not believe the floaters at the top should be a problem
Also make sure you wipe and clean your electrodes even mid cycle so that the
sludge is at a minimum
If you're excessively creating sludge then you may wish to lower your current a
bit. I would go no higher than 1ma per square inch squared maximum.
For example I brew with a 6 inch squared surface area and I brew at 2.5 ma
roughly with constant current control. And it doesn't turn yellow, however
whenever I approach 1ma per square inch squared then the liquid will colour
slightly towards amber.
Sent from my iPhone
On 10 Mar 2012, at 15:43, "CT" wrote:
First Batch of CS Hello all,
I just made my first batch of CS. I think it came out pretty good, but now I am
left with a quandary: I have some thick silvery sludge at the bottom of my jar
and some smaller flakey silver floating on top of the CS liquid. I don’t have
any “approved” filtration method in place and I would like to decant the
liquid, however I am tempted to paper-towel the top of the liquid to remove the
flakey pieces. I think I can decant without getting any of the bottom sludge
into the new container.
Any advice would be very appreciated.
Thanks,
Chris Thomas
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4862 - Release Date: 03/10/12