Re: CSH202/CS test--strange
The peroxide converts ions into particles and particles don't conduct. Conductivity goes down. The TE greatly increases when peroxide is used in clear strong CS that had little TE. TE might decrease in yellow CS as the existing larger particles break up and overall conductivity stay the same after a few fluctuations. [Same PPM in particles...different particle size..different light characteristics] None of this is very clear and is full of exceptions that haven't been nailed down. CS isn't just CS..it's all a little different even from batch to batch, day to day. Environment has an effect on the process and the CS itself..sometimes dramatic. Ode At 07:54 PM 10/9/2004 -0600, you wrote: A simple test to try to see what H202 does when added to CS- 1cc 3% H202 was added 6 oz .8 uS distilled water = the uS went up 1.2 to 2.0 uS 1cc 3% H202 added to 6 oz clear CS of 7.3 uS = the uS went up 1.2 to 8.5 uS 1cc 3% H202 added to 6 oz yellow CS of 11.2 uS = the uS immediately DROPPED to 8.3 uS (the CS did clear up) after a day and a half the uS had risen to 11.0 uS The third result is weird---always before the uS has only gone up when I have added H202 to CS. I've never done this test with measured amounts before, but I have added H202 to CS after first measuring the uS of the CS, and it has gone up. I thought to a higher reading than the uS reading of the peroxide itself. I now question this. But why would it drop when the peroxide has conductance of its own to add? What happened? sol -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSH202/CS test--strange
I did not check TE. I find it too subjective for me, and I'm just not good at any but very broad differences in TE. I believed that H202 converted particles into ions, raising the conductivity. I just read somewhere that Frank Key has said this is the way it works, thus he does not recommend adding peroxide to his Mesosilver, as it will break the particles into ions. Can't recall where I read it. All I know is I am now more puzzled than ever. Just once I'd like to get a repeatable result. sol Ode Coyote wrote: The peroxide converts ions into particles and particles don't conduct. Conductivity goes down. The TE greatly increases when peroxide is used in clear strong CS that had little TE. TE might decrease in yellow CS as the existing larger particles break up and overall conductivity stay the same after a few fluctuations. [Same PPM in particles...different particle size..different light characteristics] None of this is very clear and is full of exceptions that haven't been nailed down. CS isn't just CS..it's all a little different even from batch to batch, day to day. Environment has an effect on the process and the CS itself..sometimes dramatic. Ode -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSH202/CS test--strange
A simple test to try to see what H202 does when added to CS- 1cc 3% H202 was added 6 oz .8 uS distilled water = the uS went up 1.2 to 2.0 uS 1cc 3% H202 added to 6 oz clear CS of 7.3 uS = the uS went up 1.2 to 8.5 uS 1cc 3% H202 added to 6 oz yellow CS of 11.2 uS = the uS immediately DROPPED to 8.3 uS (the CS did clear up) after a day and a half the uS had risen to 11.0 uS The third result is weird---always before the uS has only gone up when I have added H202 to CS. I've never done this test with measured amounts before, but I have added H202 to CS after first measuring the uS of the CS, and it has gone up. I thought to a higher reading than the uS reading of the peroxide itself. I now question this. But why would it drop when the peroxide has conductance of its own to add? What happened? sol -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
