Re: CSHVAC silver
Marshall, I just re-read this e-mail and thought I'd pass along this link if you haven't seen it. I spoke with Bill Fernald for a few minutes over the phone about the process that he uses and this picture is worth a thousand words. http://utopiasilver.com/goldcloseup.jpg Regards, Chip Hoyle Marshall Dudley wrote: I have tried them for gold using the submerged non-arcing CS production method, and was unsuccessfully in doing anyting but boiling the water. Using two of them in parallel is what we use for making the Silver Lighning CS. Works great. With a flow through you can make about 2 gallons an hour for 5 ppm CS per transformer if you cool the entrance water to near freezing. Marshall Chip Hoyle wrote: Hi everybody, I just got my 15kv 60ma x-former for producing colloidal gold. Has anyone on the list ever tried using an x-former of this voltage to do CS? I'm looking forward to taking the leap into HVAC. Would appreciate any feedback. Thanks! Chip Hoyle -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSHVAC silver
Chip; I have spent about an hour with Bill about a month ago in regards to his process. It is intended to make gold colloid. I tried that setup for silver and it makes a very large particle size. When I contaacted him again about the silver problems he told me that it makes large particles. I have a gallon of CS with a bright red TE which I never get with the arc CO2 process. The process that Dr Bill Biagioli and I put together makes CS with a particle size of 1-2 and 6-8 nm with no T.E. not even in a dark room. I have the TEM to prove it. It is available to anyone at no cost. Chip, I will send the TEM on a separate post. It is quite large. Ole Bob -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSHVAC silver
Bob wrote: The process that Dr Bill Biagioli and I put together makes CS with a particle size of 1-2 and 6-8 nm with no T.E. not even in a dark room. I have the TEM to prove it. It is available to anyone at no cost. Chip, I will send the TEM on a separate post. It is quite large. I challenge the validity of the claimed particle sizes above. Firstly, because a TEM cannot accurately determine the particle size in highly ionic solutions, and secondly, the Photon Correlation Spectrometer measured much larger particles in the sample provided by Bob for cs made by this process. For more details on why a TEM is not usable for measuring particles in highly ionic solutions see: http://www.silver-colloids.com/Papers/definitions.html#TEM frank key -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSHVAC silver
Hi everybody, I just got my 15kv 60ma x-former for producing colloidal gold. Has anyone on the list ever tried using an x-former of this voltage to do CS? I'm looking forward to taking the leap into HVAC. Would appreciate any feedback. Thanks! Chip Hoyle -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSHVAC silver
I have tried them for gold using the submerged non-arcing CS production method, and was unsuccessfully in doing anyting but boiling the water. Using two of them in parallel is what we use for making the Silver Lighning CS. Works great. With a flow through you can make about 2 gallons an hour for 5 ppm CS per transformer if you cool the entrance water to near freezing. Marshall Chip Hoyle wrote: Hi everybody, I just got my 15kv 60ma x-former for producing colloidal gold. Has anyone on the list ever tried using an x-former of this voltage to do CS? I'm looking forward to taking the leap into HVAC. Would appreciate any feedback. Thanks! Chip Hoyle -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSHVAC silver
Hi Chip; I have used 15 kv 60 ma to make CS using the ARC CO2 method. The wet electrode can be anything from a #14 wire to a large plate. However the arc electrode MUST be at leas a 0.40 x 1/2 sheet fastened on to a 1/4 bolt. You MUST use a thermoset plastic such as phenlic for the support of the bolt as one whale of a lot of heat is developed that will melt thermoplastic plastics. When I tried a #14 top electrode at 60 ma it vaporized Ole Bob
CSHVAC Silver
Is there a website that gives simple directions for making HVAC silver? How long do you do it to say 16oz of distilled water? All you will find is a clear color? On the internet there are just people selling the stuff. I have an actown 12,000v transformer from my enhancer setup (www.molecular-enhancer.com) and know my way around electricity. If anyone is eager to tell me over the phone, pleas e-mail your telephone number privately. Thanks Dan -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com