Re: CS> And household mold
A product called Oxyclean is murder on mold; it is fast and non-toxic. After you get the mold off, you can use CS to keep it off, methinks. I have read on this list that Oxyclean is basically a sort of powdered hydrogen peroxide; it breaks down into harmless chemicals, the maker claims. Using Oxyclean first would save a lot of time. It is cheap and widely available. JBB "Ralph D.Gerhardt" wrote: > > Dan, > > About two years ago, an old building that is used by a club I belong to had > mold on the ceiling in one of the rooms. It was caused by a water leak on > the roof. The leak was repaired but the mold was still there. The cost to > clean it up by a commercial company was going to be a lot of money, which > we did not have. I thought, what the heck, why don't we try CS. Of course > the other members were very skeptical and, for awhile, would not let me > try. Finally, out of desperation, they asked me how much my "remedy" would > cost. When I told them there was no cost (because CS is so cheap) they > relented and let me try. The room was about 20' x 20' and the ceiling was > black with the mold. I put the CS in a hand sprayer. I also had a large > bucket of clean water and some clean rags. I soaked a rag in CS and worked > on about a 2' x 2' section at a time. I sprayed on the CS and wiped off > the mold. I did this several times per section until the ceiling was white > again. Each time I would rinse the rag thoroughly in the clean water and > change the water regularly. After a section was as clean as I could get > it, I sprayed a light coat of CS on the area and left it to dry. I kept > doing a section at a time until the ceiling was clean. That was nearly 2 > years ago and, today, the ceiling is still white with no sign of the > mold. I don't know if this answers your question but I hope so. Like has > been said many times before, you have to be able to get the CS to the mold, > bacteria, or virus for it to work. I used CS that I make with > three 9-volt batteries. I don't know the concentration but it is what I > use for everything else. Good luck. > > Ralph > > At 04:08 AM 3/27/03 -0500, you wrote: > >Can anyone say how well CS works against mold in the house? Bathroom etc. > >Should it brewed to a higher concentration? > > > > > >Thanks > >Dan > > > > > >-- > >The silver-list is a moderated forum for discussion of colloidal silver. > > > >Instructions for unsubscribing may be found at: http://silverlist.org > > > >To post, address your message to: silver-list@eskimo.com > > > >Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > > >List maintainer: Mike Devour
Re: CS> And household mold
I tremendously appreciate the information. Thanks for taking the time. Dan - Original Message - From: "Ralph D.Gerhardt" To: Sent: Friday, March 28, 2003 1:55 PM Subject: CS> And household mold > Dan, > > About two years ago, an old building that is used by a club I belong to had > mold on the ceiling in one of the rooms. It was caused by a water leak on > the roof. The leak was repaired but the mold was still there. The cost to > clean it up by a commercial company was going to be a lot of money, which > we did not have. I thought, what the heck, why don't we try CS. Of course > the other members were very skeptical and, for awhile, would not let me > try. Finally, out of desperation, they asked me how much my "remedy" would > cost. When I told them there was no cost (because CS is so cheap) they > relented and let me try. The room was about 20' x 20' and the ceiling was > black with the mold. I put the CS in a hand sprayer. I also had a large > bucket of clean water and some clean rags. I soaked a rag in CS and worked > on about a 2' x 2' section at a time. I sprayed on the CS and wiped off > the mold. I did this several times per section until the ceiling was white > again. Each time I would rinse the rag thoroughly in the clean water and > change the water regularly. After a section was as clean as I could get > it, I sprayed a light coat of CS on the area and left it to dry. I kept > doing a section at a time until the ceiling was clean. That was nearly 2 > years ago and, today, the ceiling is still white with no sign of the > mold. I don't know if this answers your question but I hope so. Like has > been said many times before, you have to be able to get the CS to the mold, > bacteria, or virus for it to work. I used CS that I make with > three 9-volt batteries. I don't know the concentration but it is what I > use for everything else. Good luck. > > Ralph > > At 04:08 AM 3/27/03 -0500, you wrote: > >Can anyone say how well CS works against mold in the house? Bathroom etc. > >Should it brewed to a higher concentration? > > > > > >Thanks > >Dan > > > > > >-- > >The silver-list is a moderated forum for discussion of colloidal silver. > > > >Instructions for unsubscribing may be found at: http://silverlist.org > > > >To post, address your message to: silver-list@eskimo.com > > > >Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > > >List maintainer: Mike Devour > > >
Re: CS> And household mold
I've used it on areas that get wet often and on areas that stay wet and had black mold. The mold is gone and has not returned. Used regular concentration and it worked fine. (I get my CS from a friend and have forgotten the concentration but it's not high.) Nancy Estes dog...@apex2000.net - Original Message - From: "Dan" To: Sent: Thursday, March 27, 2003 3:08 AM Subject: CS> And household mold > Can anyone say how well CS works against mold in the house? Bathroom etc. > Should it brewed to a higher concentration? > > > Thanks > Dan > -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour
