Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
Can you duplex care if from a non-dialplan issue? Phone dials 123@IP

If not then maybe the con is not actually allowing the traffic. I have
ipsec Vpn connections but then I have to allow the traffic (filter) to
actually use it.

Can sipx1 trace route to sipx2, vice versa.
On Apr 24, 2012 12:02 PM, "Aaron Pursell"  wrote:

>  VPN.
>
> We use standard internal subnets 172.16 and 192.168 for all networks. All
> the subnets are there, but it is what it is, the call on the 192.168.1.x
> network doesn't even leave our sip server even though the dial plan says
> shoot it over to 172.16.20.8.
>
> I'm sure its an mistake on our end (obviously) however, I don't think I'll
> find any more insight here than what has already been given. All I know is
> the server the calls originate from show a 500 internal server error when
> dialing, where as when you dial one of the other VPN sites, you see it
> route it over to the other site error free. There is no difference in the
> cisco configs between the sites other than information relevant to their
> link.
>
>
>  Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana  59405
>
> (406) 771-3721
> aar...@esgw.org
> >>> Tony Graziano  4/24/2012 9:29 AM >>>
> is it an internal (vpn or locally connected) call?
>
> if it is, do the subnets on each side reflect a local subnet (to not
> invoke media relay)?
>
> i am thinking if each system can see the other system and look it up via
> dns and resolve the SRV to the local address or use a simple gateway method
> (not as desirable, IMO), you probably forgot to add the subnets for the
> other systems at the other end in each system...
>
> if so, thats an oopsie on you.
>
> On Tue, Apr 24, 2012 at 11:12 AM, Tony Graziano <
> tgrazi...@myitdepartment.net> wrote:
>
>> did you try calling from a UA at one end in the same form?
>>
>> 1234@>
>> On Tue, Apr 24, 2012 at 11:06 AM, Aaron Pursell  wrote:
>>
>>>  Inter, its a custom but I've tried it every way I can think of. So
>>> back to the drawing board.
>>>
>>>   Aaron Pursell
>>> Network Systems Administration
>>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>>> 4400 Central Ave
>>> Great Falls, Montana 59405
>>>
>>> (406) 771-3721
>>> aar...@esgw.org
>>> >>> Tony Graziano  4/24/2012 8:55 AM >>>
>>>  Thats not a valid answer. Your answer should be in the form of either
>>> "intra" or "inter". (Inside the same sipdomain--intra, or between two
>>> different sip domains--inter)
>>>
>>> Can you call from a UA to the same destination in the same format? ie.e.
>>> 1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be site
>>> to site using sipdomain name)
>>>
>>>
>>>
>>> On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell  wrote:
>>>
  Yes

   Aaron Pursell
 Network Systems Administration
  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
 4400 Central Ave
 Great Falls, Montana 59405

 (406) 771-3721
 aar...@esgw.org
 >>> Tony Graziano  4/24/2012 8:41 AM >>>
  Is the call an intra or inter domain call?

 On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell wrote:

>  The 12xx gateway has a gateway setup for 37xx and the appropriate
> dial-plan.
>
>   Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana 59405
>
> (406) 771-3721
> aar...@esgw.org
> >>> Tony Graziano  4/24/2012 8:26 AM >>>
>  does the other system also have a gateway from your system? if not,
> it might not pass a check which shows it is an allowed call in that 
> manner.
>
> On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell wrote:
>
>>  All,
>>  Having a newly found problem where we have assigned 12XX to a
>> location, server IP is 172.16.20.8. From our main office at 192.168.1.8,
>> calls destined to 12XX seem to route to that server only. Dialplan says 
>> 12
>> and 2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
>> server throws a 500 internal server error.
>>  Sipx-trace is attached. Any suggestions or help is appreciated and
>> to make sure it wasn't 12XX messing it up, I created a dialplan of 2300 
>> to
>> dial to 1250 at the distant end and still get a 500 internal server 
>> error.
>> I put the dial plans all the way at the top and still no change, its like
>> its trying to route it within its self. Maybe a second set of eyes will
>> catch something I'm missing?
>>   Aaron Pursell
>> Network Systems Administration
>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>> 4400 Central Ave
>> Great Falls, Montana 59405
>>
>> (406) 771-3721
>> aar...@esgw.org
>>
>> ___
>> sipx-users mailing list
>> sipx-users@list.sipfoundry.org
>> List

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Aaron Pursell 
VPN.
 
We use standard internal subnets 172.16 and 192.168 for all networks.
All the subnets are there, but it is what it is, the call on the
192.168.1.x network doesn't even leave our sip server even though the
dial plan says shoot it over to 172.16.20.8.
 
I'm sure its an mistake on our end (obviously) however, I don't think
I'll find any more insight here than what has already been given. All I
know is the server the calls originate from show a 500 internal server
error when dialing, where as when you dial one of the other VPN sites,
you see it route it over to the other site error free. There is no
difference in the cisco configs between the sites other than information
relevant to their link.

 
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana  59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 9:29 AM >>>
is it an internal (vpn or locally connected) call?

if it is, do the subnets on each side reflect a local subnet (to not
invoke media relay)?

i am thinking if each system can see the other system and look it up
via dns and resolve the SRV to the local address or use a simple gateway
method (not as desirable, IMO), you probably forgot to add the subnets
for the other systems at the other end in each system...

if so, thats an oopsie on you.

On Tue, Apr 24, 2012 at 11:12 AM, Tony Graziano
 wrote:


did you try calling from a UA at one end in the same form?

1234@
wrote:


Inter, its a custom but I've tried it every way I can think of. So back
to the drawing board.

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:55 AM >>>
Thats not a valid answer. Your answer should be in the form of either
"intra" or "inter". (Inside the same sipdomain--intra, or between two
different sip domains--inter)

Can you call from a UA to the same destination in the same format?
ie.e. 1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be
site to site using sipdomain name)



On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell 
wrote:


Yes

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:41 AM >>>
Is the call an intra or inter domain call?

On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell 
wrote:


The 12xx gateway has a gateway setup for 37xx and the appropriate
dial-plan.

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:26 AM >>>
does the other system also have a gateway from your system? if not, it
might not pass a check which shows it is an allowed call in that
manner.

On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell 
wrote:


All,
Having a newly found problem where we have assigned 12XX to a location,
server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
destined to 12XX seem to route to that server only. Dialplan says 12 and
2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
server throws a 500 internal server error.
Sipx-trace is attached. Any suggestions or help is appreciated and to
make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
dial to 1250 at the distant end and still get a 500 internal server
error. I put the dial plans all the way at the top and still no change,
its like its trying to route it within its self. Maybe a second set of
eyes will catch something I'm missing?
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax service

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
is it an internal (vpn or locally connected) call?

if it is, do the subnets on each side reflect a local subnet (to not invoke
media relay)?

i am thinking if each system can see the other system and look it up via
dns and resolve the SRV to the local address or use a simple gateway method
(not as desirable, IMO), you probably forgot to add the subnets for the
other systems at the other end in each system...

if so, thats an oopsie on you.

On Tue, Apr 24, 2012 at 11:12 AM, Tony Graziano <
tgrazi...@myitdepartment.net> wrote:

> did you try calling from a UA at one end in the same form?
>
> 1234@
> On Tue, Apr 24, 2012 at 11:06 AM, Aaron Pursell  wrote:
>
>>  Inter, its a custom but I've tried it every way I can think of. So back
>> to the drawing board.
>>
>>
>>  Aaron Pursell
>> Network Systems Administration
>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>> 4400 Central Ave
>> Great Falls, Montana  59405
>>
>> (406) 771-3721
>> aar...@esgw.org
>> >>> Tony Graziano  4/24/2012 8:55 AM >>>
>> Thats not a valid answer. Your answer should be in the form of either
>> "intra" or "inter". (Inside the same sipdomain--intra, or between two
>> different sip domains--inter)
>>
>> Can you call from a UA to the same destination in the same format? ie.e.
>> 1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be site
>> to site using sipdomain name)
>>
>>
>>
>> On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell  wrote:
>>
>>>  Yes
>>>
>>>   Aaron Pursell
>>> Network Systems Administration
>>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>>> 4400 Central Ave
>>> Great Falls, Montana 59405
>>>
>>> (406) 771-3721
>>> aar...@esgw.org
>>> >>> Tony Graziano  4/24/2012 8:41 AM >>>
>>>  Is the call an intra or inter domain call?
>>>
>>> On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell  wrote:
>>>
  The 12xx gateway has a gateway setup for 37xx and the appropriate
 dial-plan.

   Aaron Pursell
 Network Systems Administration
  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
 4400 Central Ave
 Great Falls, Montana 59405

 (406) 771-3721
 aar...@esgw.org
 >>> Tony Graziano  4/24/2012 8:26 AM >>>
  does the other system also have a gateway from your system? if not,
 it might not pass a check which shows it is an allowed call in that manner.

 On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell  wrote:

>  All,
>  Having a newly found problem where we have assigned 12XX to a
> location, server IP is 172.16.20.8. From our main office at 192.168.1.8,
> calls destined to 12XX seem to route to that server only. Dialplan says 12
> and 2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
> server throws a 500 internal server error.
>  Sipx-trace is attached. Any suggestions or help is appreciated and
> to make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
> dial to 1250 at the distant end and still get a 500 internal server error.
> I put the dial plans all the way at the top and still no change, its like
> its trying to route it within its self. Maybe a second set of eyes will
> catch something I'm missing?
>   Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana 59405
>
> (406) 771-3721
> aar...@esgw.org
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



 --
 ~~
 Tony Graziano, Manager
 Telephone: 434.984.8430
 sip: tgrazi...@voice.myitdepartment.net
 Fax: 434.465.6833
 ~~
 Linked-In Profile:
 http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
 Ask about our Internet Fax services!
 ~~

 LAN/Telephony/Security and Control Systems Helpdesk:
 Telephone: 434.984.8426
 sip: helpdesk@voice.myitdepartment.**net

 Helpdesk Customers: 
 http://myhelp.myitdepartment.**net
 Blog: http://blog.myitdepartment.net

 ___
 sipx-users mailing list
 sipx-users@list.sipfoundry.org
 List Archive: http://list.sipfoundry.org/archive/sipx-users/

>>>
>>>
>>>
>>> --
>>> ~~
>>> Tony Graziano, Manager
>>> Telephone: 434.984.8430
>>> sip: tgrazi...@voice.myitdepartment.net
>>> Fax: 434.465.6833
>>> ~~
>>> Linked-In Profile:
>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>>> Ask about our Internet Fax services!
>>> ~~
>>>
>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>> Telephone: 434.984.8426
>>> sip: helpdesk@voice.myitdepartment.**net
>>>
>>> Helpdesk Customers: 
>>> http://myhelp.myitdepartment.**net

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
did you try calling from a UA at one end in the same form?

1234@ wrote:

>  Inter, its a custom but I've tried it every way I can think of. So back
> to the drawing board.
>
>
>  Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana  59405
>
> (406) 771-3721
> aar...@esgw.org
> >>> Tony Graziano  4/24/2012 8:55 AM >>>
> Thats not a valid answer. Your answer should be in the form of either
> "intra" or "inter". (Inside the same sipdomain--intra, or between two
> different sip domains--inter)
>
> Can you call from a UA to the same destination in the same format? ie.e.
> 1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be site
> to site using sipdomain name)
>
>
>
> On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell  wrote:
>
>>  Yes
>>
>>   Aaron Pursell
>> Network Systems Administration
>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>> 4400 Central Ave
>> Great Falls, Montana 59405
>>
>> (406) 771-3721
>> aar...@esgw.org
>> >>> Tony Graziano  4/24/2012 8:41 AM >>>
>>  Is the call an intra or inter domain call?
>>
>> On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell  wrote:
>>
>>>  The 12xx gateway has a gateway setup for 37xx and the appropriate
>>> dial-plan.
>>>
>>>   Aaron Pursell
>>> Network Systems Administration
>>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>>> 4400 Central Ave
>>> Great Falls, Montana 59405
>>>
>>> (406) 771-3721
>>> aar...@esgw.org
>>> >>> Tony Graziano  4/24/2012 8:26 AM >>>
>>>  does the other system also have a gateway from your system? if not, it
>>> might not pass a check which shows it is an allowed call in that manner.
>>>
>>> On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell  wrote:
>>>
  All,
  Having a newly found problem where we have assigned 12XX to a
 location, server IP is 172.16.20.8. From our main office at 192.168.1.8,
 calls destined to 12XX seem to route to that server only. Dialplan says 12
 and 2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
 server throws a 500 internal server error.
  Sipx-trace is attached. Any suggestions or help is appreciated and to
 make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
 dial to 1250 at the distant end and still get a 500 internal server error.
 I put the dial plans all the way at the top and still no change, its like
 its trying to route it within its self. Maybe a second set of eyes will
 catch something I'm missing?
   Aaron Pursell
 Network Systems Administration
  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
 4400 Central Ave
 Great Falls, Montana 59405

 (406) 771-3721
 aar...@esgw.org

 ___
 sipx-users mailing list
 sipx-users@list.sipfoundry.org
 List Archive: http://list.sipfoundry.org/archive/sipx-users/

>>>
>>>
>>>
>>> --
>>> ~~
>>> Tony Graziano, Manager
>>> Telephone: 434.984.8430
>>> sip: tgrazi...@voice.myitdepartment.net
>>> Fax: 434.465.6833
>>> ~~
>>> Linked-In Profile:
>>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>>> Ask about our Internet Fax services!
>>> ~~
>>>
>>> LAN/Telephony/Security and Control Systems Helpdesk:
>>> Telephone: 434.984.8426
>>> sip: helpdesk@voice.myitdepartment.**net
>>>
>>> Helpdesk Customers: 
>>> http://myhelp.myitdepartment.**net
>>> Blog: http://blog.myitdepartment.net
>>>
>>> ___
>>> sipx-users mailing list
>>> sipx-users@list.sipfoundry.org
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>
>>
>>
>>
>> --
>> ~~
>> Tony Graziano, Manager
>> Telephone: 434.984.8430
>> sip: tgrazi...@voice.myitdepartment.net
>> Fax: 434.465.6833
>> ~~
>> Linked-In Profile:
>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>> Ask about our Internet Fax services!
>> ~~
>>
>> LAN/Telephony/Security and Control Systems Helpdesk:
>> Telephone: 434.984.8426
>> sip: helpdesk@voice.myitdepartment.**net
>>
>> Helpdesk Customers: 
>> http://myhelp.myitdepartment.**net
>> Blog: http://blog.myitdepartment.net
>>
>> ___
>> sipx-users mailing list
>> sipx-users@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>
>
>
> --
> ~~
> Tony Graziano, Manager
> Telephone: 434.984.8430
> sip: tgrazi...@voice.myitdepartment.net
> Fax: 434.465.6833
> ~~
> Linked-In Profile:
> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
> Ask about our Internet Fax services!
> ~~
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: helpdesk@voice.myitdepartment.**net
>
> Helpdesk Customers: 
> http://myhelp.myitdepartment.

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Aaron Pursell 
Inter, its a custom but I've tried it every way I can think of. So back
to the drawing board.

 
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana  59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:55 AM >>>
Thats not a valid answer. Your answer should be in the form of either
"intra" or "inter". (Inside the same sipdomain--intra, or between two
different sip domains--inter)

Can you call from a UA to the same destination in the same format?
ie.e. 1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be
site to site using sipdomain name)



On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell 
wrote:


Yes

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:41 AM >>>
Is the call an intra or inter domain call?

On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell 
wrote:


The 12xx gateway has a gateway setup for 37xx and the appropriate
dial-plan.

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:26 AM >>>
does the other system also have a gateway from your system? if not, it
might not pass a check which shows it is an allowed call in that
manner.

On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell 
wrote:


All,
Having a newly found problem where we have assigned 12XX to a location,
server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
destined to 12XX seem to route to that server only. Dialplan says 12 and
2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
server throws a 500 internal server error.
Sipx-trace is attached. Any suggestions or help is appreciated and to
make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
dial to 1250 at the distant end and still get a 500 internal server
error. I put the dial plans all the way at the top and still no change,
its like its trying to route it within its self. Maybe a second set of
eyes will catch something I'm missing?
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
Thats not a valid answer. Your answer should be in the form of either
"intra" or "inter". (Inside the same sipdomain--intra, or between two
different sip domains--inter)

Can you call from a UA to the same destination in the same format? ie.e.
1234@? Is the dialplan entry CUSTOM or SITE TO SITE (should be site to
site using sipdomain name)



On Tue, Apr 24, 2012 at 10:48 AM, Aaron Pursell  wrote:

>  Yes
>
>
>  Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana  59405
>
> (406) 771-3721
> aar...@esgw.org
> >>> Tony Graziano  4/24/2012 8:41 AM >>>
> Is the call an intra or inter domain call?
>
> On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell  wrote:
>
>>  The 12xx gateway has a gateway setup for 37xx and the appropriate
>> dial-plan.
>>
>>   Aaron Pursell
>> Network Systems Administration
>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>> 4400 Central Ave
>> Great Falls, Montana 59405
>>
>> (406) 771-3721
>> aar...@esgw.org
>> >>> Tony Graziano  4/24/2012 8:26 AM >>>
>>  does the other system also have a gateway from your system? if not, it
>> might not pass a check which shows it is an allowed call in that manner.
>>
>> On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell  wrote:
>>
>>>  All,
>>>  Having a newly found problem where we have assigned 12XX to a
>>> location, server IP is 172.16.20.8. From our main office at 192.168.1.8,
>>> calls destined to 12XX seem to route to that server only. Dialplan says 12
>>> and 2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
>>> server throws a 500 internal server error.
>>>  Sipx-trace is attached. Any suggestions or help is appreciated and to
>>> make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
>>> dial to 1250 at the distant end and still get a 500 internal server error.
>>> I put the dial plans all the way at the top and still no change, its like
>>> its trying to route it within its self. Maybe a second set of eyes will
>>> catch something I'm missing?
>>>   Aaron Pursell
>>> Network Systems Administration
>>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>>> 4400 Central Ave
>>> Great Falls, Montana 59405
>>>
>>> (406) 771-3721
>>> aar...@esgw.org
>>>
>>> ___
>>> sipx-users mailing list
>>> sipx-users@list.sipfoundry.org
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>>
>>
>>
>>
>> --
>> ~~
>> Tony Graziano, Manager
>> Telephone: 434.984.8430
>> sip: tgrazi...@voice.myitdepartment.net
>> Fax: 434.465.6833
>> ~~
>> Linked-In Profile:
>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>> Ask about our Internet Fax services!
>> ~~
>>
>> LAN/Telephony/Security and Control Systems Helpdesk:
>> Telephone: 434.984.8426
>> sip: helpdesk@voice.myitdepartment.**net
>>
>> Helpdesk Customers: 
>> http://myhelp.myitdepartment.**net
>> Blog: http://blog.myitdepartment.net
>>
>> ___
>> sipx-users mailing list
>> sipx-users@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>
>
>
> --
> ~~
> Tony Graziano, Manager
> Telephone: 434.984.8430
> sip: tgrazi...@voice.myitdepartment.net
> Fax: 434.465.6833
> ~~
> Linked-In Profile:
> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
> Ask about our Internet Fax services!
> ~~
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: helpdesk@voice.myitdepartment.**net
>
> Helpdesk Customers: 
> http://myhelp.myitdepartment.**net
> Blog: http://blog.myitdepartment.net
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

-- 
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Aaron Pursell 
Yes

 
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana  59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:41 AM >>>
Is the call an intra or inter domain call?

On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell 
wrote:


The 12xx gateway has a gateway setup for 37xx and the appropriate
dial-plan.

Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:26 AM >>>
does the other system also have a gateway from your system? if not, it
might not pass a check which shows it is an allowed call in that
manner.

On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell 
wrote:


All,
Having a newly found problem where we have assigned 12XX to a location,
server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
destined to 12XX seem to route to that server only. Dialplan says 12 and
2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
server throws a 500 internal server error.
Sipx-trace is attached. Any suggestions or help is appreciated and to
make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
dial to 1250 at the distant end and still get a 500 internal server
error. I put the dial plans all the way at the top and still no change,
its like its trying to route it within its self. Maybe a second set of
eyes will catch something I'm missing?
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
Is the call an intra or inter domain call?

On Tue, Apr 24, 2012 at 10:36 AM, Aaron Pursell  wrote:

>  The 12xx gateway has a gateway setup for 37xx and the appropriate
> dial-plan.
>
>
>  Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana  59405
>
> (406) 771-3721
> aar...@esgw.org
> >>> Tony Graziano  4/24/2012 8:26 AM >>>
> does the other system also have a gateway from your system? if not, it
> might not pass a check which shows it is an allowed call in that manner.
>
> On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell  wrote:
>
>>  All,
>>  Having a newly found problem where we have assigned 12XX to a location,
>> server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
>> destined to 12XX seem to route to that server only. Dialplan says 12 and 2
>> digits send to 172.16.20.8 gateway. Doing a network grep our 4.4 server
>> throws a 500 internal server error.
>>  Sipx-trace is attached. Any suggestions or help is appreciated and to
>> make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
>> dial to 1250 at the distant end and still get a 500 internal server error.
>> I put the dial plans all the way at the top and still no change, its like
>> its trying to route it within its self. Maybe a second set of eyes will
>> catch something I'm missing?
>>   Aaron Pursell
>> Network Systems Administration
>>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
>> 4400 Central Ave
>> Great Falls, Montana 59405
>>
>> (406) 771-3721
>> aar...@esgw.org
>>
>> ___
>> sipx-users mailing list
>> sipx-users@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>
>
>
> --
> ~~
> Tony Graziano, Manager
> Telephone: 434.984.8430
> sip: tgrazi...@voice.myitdepartment.net
> Fax: 434.465.6833
> ~~
> Linked-In Profile:
> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
> Ask about our Internet Fax services!
> ~~
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: helpdesk@voice.myitdepartment.**net
>
> Helpdesk Customers: 
> http://myhelp.myitdepartment.**net
> Blog: http://blog.myitdepartment.net
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

-- 
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Aaron Pursell 
The 12xx gateway has a gateway setup for 37xx and the appropriate
dial-plan.

 
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana  59405

(406) 771-3721
aar...@esgw.org
>>> Tony Graziano  4/24/2012 8:26 AM >>>
does the other system also have a gateway from your system? if not, it
might not pass a check which shows it is an allowed call in that
manner.

On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell 
wrote:


All,
Having a newly found problem where we have assigned 12XX to a location,
server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
destined to 12XX seem to route to that server only. Dialplan says 12 and
2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
server throws a 500 internal server error.
Sipx-trace is attached. Any suggestions or help is appreciated and to
make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
dial to 1250 at the distant end and still get a 500 internal server
error. I put the dial plans all the way at the top and still no change,
its like its trying to route it within its self. Maybe a second set of
eyes will catch something I'm missing?
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana 59405

(406) 771-3721
aar...@esgw.org

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/




-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] Dial Plan Issue

2012-04-24 Thread Tony Graziano 
does the other system also have a gateway from your system? if not, it
might not pass a check which shows it is an allowed call in that manner.

On Tue, Apr 24, 2012 at 9:45 AM, Aaron Pursell  wrote:

>  All,
>
> Having a newly found problem where we have assigned 12XX to a location,
> server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
> destined to 12XX seem to route to that server only. Dialplan says 12 and 2
> digits send to 172.16.20.8 gateway. Doing a network grep our 4.4 server
> throws a 500 internal server error.
>
> Sipx-trace is attached. Any suggestions or help is appreciated and to make
> sure it wasn't 12XX messing it up, I created a dialplan of 2300 to dial to
> 1250 at the distant end and still get a 500 internal server error. I put
> the dial plans all the way at the top and still no change, its like its
> trying to route it within its self. Maybe a second set of eyes will catch
> something I'm missing?
>
>
>
>
> Aaron Pursell
> Network Systems Administration
>  Easter Seals-Goodwill Northern Rocky Mountain, Inc.
> 4400 Central Ave
> Great Falls, Montana  59405
>
> (406) 771-3721
> aar...@esgw.org
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~

-- 
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[sipx-users] Dial Plan Issue

2012-04-24 Thread Aaron Pursell 
All,
 
Having a newly found problem where we have assigned 12XX to a location,
server IP is 172.16.20.8. From our main office at 192.168.1.8, calls
destined to 12XX seem to route to that server only. Dialplan says 12 and
2 digits send to 172.16.20.8 gateway. Doing a network grep our 4.4
server throws a 500 internal server error.
 
Sipx-trace is attached. Any suggestions or help is appreciated and to
make sure it wasn't 12XX messing it up, I created a dialplan of 2300 to
dial to 1250 at the distant end and still get a 500 internal server
error. I put the dial plans all the way at the top and still no change,
its like its trying to route it within its self. Maybe a second set of
eyes will catch something I'm missing?
 
 
 
 
Aaron Pursell
Network Systems Administration
Easter Seals-Goodwill Northern Rocky Mountain, Inc.
4400 Central Ave
Great Falls, Montana  59405

(406) 771-3721
aar...@esgw.org


	
		
			z9hG4bK96385c1a1C714A0B
		
		2012-04-24T13:38:08.539370Z
		192.168.1.49:5060
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		1,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		INVITE
		1 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:14999
		192.168.1.49:5060
		false
		
	
	
		
			z9hG4bK96385c1a1C714A0B
		
		2012-04-24T13:38:08.540180Z
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		192.168.1.49:5060
		1,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		100
		Trying
		2 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15006
		192.168.1.49:5060
		true
		
	
	
		
			z9hG4bK96385c1a1C714A0B
		
		2012-04-24T13:38:08.543112Z
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		192.168.1.49:5060
		1,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,Ek1wbr
		407
		Proxy Authentication Required
		3 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15027
		192.168.1.49:5060
		true
		
	
	
		
			z9hG4bK96385c1a1C714A0B
		
		2012-04-24T13:38:08.551080Z
		192.168.1.49:5060
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		A1,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,Ek1wbr
		ACK
		4 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15032
		192.168.1.49:5060
		false
		
	
	
		
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.554985Z
		192.168.1.49:5060
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		INVITE
		5 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15039
		192.168.1.49:5060
		false
		
	
	
		
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.555843Z
		gtfph.esgw.org-SipXProxy
		192.168.1.49:5060
		192.168.1.8:5060
		192.168.1.49:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		100
		Trying
		6 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15046
		192.168.1.49:5060
		true
		
	
	
		
			z9hG4bK-XX-00659IRkrR9h9OxUoL`JTaYNOA
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.559700Z
		gtfph.esgw.org-SipXProxy
		gtfph.esgw.org-SipRegistrar
		192.168.1.8:54732
		192.168.1.8:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		INVITE
		7 /tmp/trace.aSg19388/_.sipregistrar.trace.xml:3157 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15083
		192.168.1.8:54732
		false
		
	
	
		
			z9hG4bK-XX-00659IRkrR9h9OxUoL`JTaYNOA
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.561490Z
		gtfph.esgw.org-SipRegistrar
		gtfph.esgw.org-SipXProxy
		192.168.1.8:-1
		192.168.1.8:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		100
		Trying
		8 /tmp/trace.aSg19388/_.sipregistrar.trace.xml:3162 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15088
		192.168.1.8:5060
		true
		
	
	
		
			z9hG4bK-XX-00659IRkrR9h9OxUoL`JTaYNOA
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.564625Z
		gtfph.esgw.org-SipRegistrar
		gtfph.esgw.org-SipXProxy
		192.168.1.8:-1
		192.168.1.8:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,yn12aL
		302
		Moved Temporarily
		9 /tmp/trace.aSg19388/_.sipregistrar.trace.xml:3205 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15097
		192.168.1.8:5060
		true
		
	
	
		
			z9hG4bK-XX-00659IRkrR9h9OxUoL`JTaYNOA
		
		2012-04-24T13:38:08.565466Z
		gtfph.esgw.org-SipXProxy
		gtfph.esgw.org-SipRegistrar
		192.168.1.8:54732
		192.168.1.8:5060
		A2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,yn12aL
		ACK
		10 /tmp/trace.aSg19388/_.sipregistrar.trace.xml:3211 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15109
		192.168.1.8:54732
		false
		
	
	
		
			z9hG4bK-XX-0067QuugkJqvSmGMOHmm45UWBw~MteaqCzQuU8yxMCL6qUFDA
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.568078Z
		gtfph.esgw.org-SipXProxy
		gtfph.esgw.org-SipXProxy
		192.168.1.8:5060
		192.168.1.8:5060
		2,86856d0c-3e11761d-f53263e@192.168.1.49,BAD4AB68-FD7E0239,
		INVITE
		11 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15137 /tmp/trace.aSg19388/_.sipXproxy.trace.xml:15142
		192.168.1.8:5060
		true
		
	
	
		
			z9hG4bK-XX-0067QuugkJqvSmGMOHmm45UWBw~MteaqCzQuU8yxMCL6qUFDA
			z9hG4bK49a4e6f4EC9CFB0
		
		2012-04-24T13:38:08.569636Z
		gtfph.esgw.org-SipXProx

Re: [sipx-users] Dial plan issue - internal extensions

2009-01-22 Thread Picher, Michael 
Hi Kenny,

 

You can setup a custom dial rule to make this happen.  In the custom
dial rule make sure you have your gateway in there and have the dail
plan entry enabled..

 

After you create the dial plan entry, don't forget to activate the dial
plan again.

 

Mike

 

From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Mitchell,
Kenny (Ineos)
Sent: Thursday, January 22, 2009 10:28 AM
To: sipx-users@list.sipfoundry.org
Subject: [sipx-users] Dial plan issue - internal extensions

 

 

I'm currently trying to set up a Sip-X 3.10.2 system at work to evaluate
the possibility of using it to replace our traditional switches.  We
have a number of Siemens and iSDX switches on site, so I am using a
Mediant 1000 gateway with an FXO card in it to give myself a tap into
the local extensions.  I have downloaded the UK English localization
pack and installed it, then enabled the dial-plans that come with it and
I can quite happily call the outside world.

Since I'm going through a hard-wired switch I have to dial a zero for an
outside line, which is no hardship, but I want to be able to call local
extensions on our internal switches without the need for a prefix.  I
currently have to dial a 9 to get the switch to route to the gateway and
the internal 4-digit extensions, and I have no clue which rule is
handling this.  I have tried to set up a plan whereby any 4-digit number
starting with a 3,5,6,7 or 8 is routed to the gateway, but all I get is
the dreaded "that extension is not valid".  How do I get Sip-X to send a
4-digit number to the gateway via a dial-plan, as none of mine appear to
work.  Help!

Kenny Mitchell 
Infrastructure Analyst 
Ineos Refinery 
01324 478305 

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users

[sipx-users] Dial plan issue - internal extensions

2009-01-22 Thread Mitchell, Kenny (Ineos) 

I'm currently trying to set up a Sip-X 3.10.2 system at work to evaluate
the possibility of using it to replace our traditional switches.  We
have a number of Siemens and iSDX switches on site, so I am using a
Mediant 1000 gateway with an FXO card in it to give myself a tap into
the local extensions.  I have downloaded the UK English localization
pack and installed it, then enabled the dial-plans that come with it and
I can quite happily call the outside world.

Since I'm going through a hard-wired switch I have to dial a zero for an
outside line, which is no hardship, but I want to be able to call local
extensions on our internal switches without the need for a prefix.  I
currently have to dial a 9 to get the switch to route to the gateway and
the internal 4-digit extensions, and I have no clue which rule is
handling this.  I have tried to set up a plan whereby any 4-digit number
starting with a 3,5,6,7 or 8 is routed to the gateway, but all I get is
the dreaded "that extension is not valid".  How do I get Sip-X to send a
4-digit number to the gateway via a dial-plan, as none of mine appear to
work.  Help!

Kenny Mitchell
Infrastructure Analyst
Ineos Refinery
01324 478305

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users