Re: [sipx-users] HA setup with more than 2 redundant servers

[Tony Graziano]

You can simulate this inside but I think pptp is a poor choice in that the
packets use a different IP address to be native to the network.

IPSEC AND OPENVPN are more suited to point to point and can properly tested
with the same network schema before rolling the systems out and over a vpn.

Pptp is really REALLY a poor choice here. You might not understand but the
routing and broadcast of how pptp works in a firewall advertises and routes
thins differently. It might be fine for some remote user but as a site to
site con it is somewhat crippling (IMO).
On Apr 14, 2012 11:42 AM, "Todd Hodgen"  wrote:

> First mention of a Tunnel between the servers.   Again, I’d recommend you
> get this working in a lab first, without a tunnel.  Then add a tunnel
> between servers and see if it breaks things.  You will likely see what is
> breaking it very quickly, and without guessing.
>
> ** **
>
> *From:* sipx-users-boun...@list.sipfoundry.org [mailto:
> sipx-users-boun...@list.sipfoundry.org] *On Behalf Of *Nitin Mirchandani
> *Sent:* Saturday, April 14, 2012 7:46 AM
> *To:* sipx-users@list.sipfoundry.org
> *Subject:* Re: [sipx-users] HA setup with more than 2 redundant servers***
> *
>
> ** **
>
> The only thing that can raise issue is that the sites are connected via
> PPTP VPN.
> Latency is sub 10ms.
>
> Will MS PPTP(the BEST implemetation so far - as it is transparent to
> all protocols) be an issue?
>
> We had issues with OpenVPn which is half ass implemetation.
>
> Does the tunnel (which sipx uses) can have issues with PPTP? I can see
> that sometime later the sending profile fails.
>
> Rgds
> Nitin
>  
> --
>
> Date: Sat, 14 Apr 2012 03:28:51 -0400
> From: mpic...@ezuce.com
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
> have many customers running with 3-5 servers...
>
> ** **
>
> your statement is incorrect.  i would say that your installation is
> unstable with more than 2 servers.
>
> ** **
>
> mike
>
> On Sat, Apr 14, 2012 at 3:14 AM, Nitin Mirchandani <
> nitin_mirchand...@hotmail.com> wrote:
>
> Of course I need to send profiles - But when its done, it starts failing
> in different ways.
> Each time error is different.
>
> If I switch off one server(redundant), and send profiels, it starts
> working again.
>
> Since its failing in different ways, and dns is correct (i have rechecked
> hundreds of times), I think sipx is unstable on 3 servers.
>  ****
> ------
>
> Date: Fri, 13 Apr 2012 09:44:09 -0400
> From: mpic...@ezuce.com
>
>
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
> you always need to send profiles after the server pulls down it's
> configuration stuff...
>
> On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:*
> ***
>
> 2012/4/13 Nitin Mirchandani 
>
> Hello
> Installed it 5 or 6 time.
> Now, the third server has come with "service disabled"
>
> Maybe - 4.4 doesnot support more than 2 servers?
>
> ** **
>
> ** **
>
> Send profiles to that particular server
>
> ** **
>
> George 
>
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
> 
>
> ** **
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
>
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
> ** **
>
>
> 
> 
>
> There are 10 kinds of people in the world, those who understand binary and
> those who don't.
>
>
>
> ___ sipx-users mailing list
> sipx-users@list.sipfoundry.org List Archive:
> http://list.sipfoundry.org/archive/sipx-users/
>
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
> 
>
> ** **
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
>
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twit

Re: [sipx-users] HA setup with more than 2 redundant servers

[Todd Hodgen]

First mention of a Tunnel between the servers.   Again, I'd recommend you
get this working in a lab first, without a tunnel.  Then add a tunnel
between servers and see if it breaks things.  You will likely see what is
breaking it very quickly, and without guessing.

 

From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Nitin
Mirchandani
Sent: Saturday, April 14, 2012 7:46 AM
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

 

The only thing that can raise issue is that the sites are connected via PPTP
VPN.
Latency is sub 10ms.
 
Will MS PPTP(the BEST implemetation so far - as it is transparent to all
protocols) be an issue?
 
We had issues with OpenVPn which is half ass implemetation.
 
Does the tunnel (which sipx uses) can have issues with PPTP? I can see that
sometime later the sending profile fails.
 
Rgds
Nitin
 

  _  

Date: Sat, 14 Apr 2012 03:28:51 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

have many customers running with 3-5 servers...

 

your statement is incorrect.  i would say that your installation is unstable
with more than 2 servers.

 

mike

On Sat, Apr 14, 2012 at 3:14 AM, Nitin Mirchandani
 wrote:

Of course I need to send profiles - But when its done, it starts failing in
different ways.
Each time error is different.
 
If I switch off one server(redundant), and send profiels, it starts working
again.
 
Since its failing in different ways, and dns is correct (i have rechecked
hundreds of times), I think sipx is unstable on 3 servers.
 

  _  

Date: Fri, 13 Apr 2012 09:44:09 -0400
From: mpic...@ezuce.com


To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

you always need to send profiles after the server pulls down it's
configuration stuff...

On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

2012/4/13 Nitin Mirchandani 

Hello 
Installed it 5 or 6 time.
Now, the third server has come with "service disabled"
 
Maybe - 4.4 doesnot support more than 2 servers?

 

 

Send profiles to that particular server

 

George 


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/





 

-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810

O.978-296-1005 X2015 
M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com

 




There are 10 kinds of people in the world, those who understand binary and
those who don't.



___ sipx-users mailing list
sipx-users@list.sipfoundry.org List Archive:
http://list.sipfoundry.org/archive/sipx-users/


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/





 

-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810

O.978-296-1005 X2015 
M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com

 




There are 10 kinds of people in the world, those who understand binary and
those who don't.

 


___ sipx-users mailing list
sipx-users@list.sipfoundry.org List Archive:
http://list.sipfoundry.org/archive/sipx-users/

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Tony Graziano]

I would suspect ipsec would work well, we use it all the time for site to
site vpn's.
On Apr 14, 2012 10:46 AM, "Nitin Mirchandani" 
wrote:

>  The only thing that can raise issue is that the sites are connected via
> PPTP VPN.
> Latency is sub 10ms.
>
> Will MS PPTP(the BEST implemetation so far - as it is transparent to
> all protocols) be an issue?
>
> We had issues with OpenVPn which is half ass implemetation.
>
> Does the tunnel (which sipx uses) can have issues with PPTP? I can see
> that sometime later the sending profile fails.
>
> Rgds
> Nitin
>
> --
> Date: Sat, 14 Apr 2012 03:28:51 -0400
> From: mpic...@ezuce.com
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
> have many customers running with 3-5 servers...
>
> your statement is incorrect.  i would say that your installation is
> unstable with more than 2 servers.
>
> mike
>
> On Sat, Apr 14, 2012 at 3:14 AM, Nitin Mirchandani <
> nitin_mirchand...@hotmail.com> wrote:
>
>  Of course I need to send profiles - But when its done, it starts failing
> in different ways.
> Each time error is different.
>
> If I switch off one server(redundant), and send profiels, it starts
> working again.
>
> Since its failing in different ways, and dns is correct (i have rechecked
> hundreds of times), I think sipx is unstable on 3 servers.
>
> ----------
> Date: Fri, 13 Apr 2012 09:44:09 -0400
> From: mpic...@ezuce.com
>
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
> you always need to send profiles after the server pulls down it's
> configuration stuff...
>
> On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:
>
> 2012/4/13 Nitin Mirchandani 
>
>  Hello
> Installed it 5 or 6 time.
> Now, the third server has come with "service disabled"
>
> Maybe - 4.4 doesnot support more than 2 servers?
>
>
> Send profiles to that particular server
>
> George
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
>
> 
> There are 10 kinds of people in the world, those who understand binary and
> those who don't.
>
>
> ___ sipx-users mailing list
> sipx-users@list.sipfoundry.org List Archive:
> http://list.sipfoundry.org/archive/sipx-users/
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
>
> 
> There are 10 kinds of people in the world, those who understand binary and
> those who don't.
>
>
> ___ sipx-users mailing list
> sipx-users@list.sipfoundry.org List Archive:
> http://list.sipfoundry.org/archive/sipx-users/
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>

-- 
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Nitin Mirchandani]

The only thing that can raise issue is that the sites are connected via PPTP 
VPN.Latency is sub 10ms. Will MS PPTP(the BEST implemetation so far - as it is 
transparent to all protocols) be an issue? We had issues with OpenVPn which is 
half ass implemetation. Does the tunnel (which sipx uses) can have issues with 
PPTP? I can see that sometime later the sending profile fails. RgdsNitin
 Date: Sat, 14 Apr 2012 03:28:51 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

have many customers running with 3-5 servers...
your statement is incorrect.  i would say that your installation is unstable 
with more than 2 servers.
mike


On Sat, Apr 14, 2012 at 3:14 AM, Nitin Mirchandani 
 wrote:





Of course I need to send profiles - But when its done, it starts failing in 
different ways.
Each time error is different.
 
If I switch off one server(redundant), and send profiels, it starts working 
again.
 

Since its failing in different ways, and dns is correct (i have rechecked 
hundreds of times), I think sipx is unstable on 3 servers.
 
Date: Fri, 13 Apr 2012 09:44:09 -0400
From: mpic...@ezuce.com

To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

you always need to send profiles after the server pulls down it's configuration 
stuff...


On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

2012/4/13 Nitin Mirchandani 







Hello 
Installed it 5 or 6 time.
Now, the third server has come with "service disabled"
 
Maybe - 4.4 doesnot support more than 2 servers?





Send profiles to that particular server
George 


___

sipx-users mailing list

sipx-users@list.sipfoundry.org

List Archive: http://list.sipfoundry.org/archive/sipx-users/


-- 
Michael Picher, Director of Technical Services


eZuce, Inc.
300 Brickstone Square
Suite 201Andover, MA. 01810O.978-296-1005 X2015 


M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com



There are 10 kinds of people in the world, those who understand binary and 
those who don't.


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
  

___

sipx-users mailing list

sipx-users@list.sipfoundry.org

List Archive: http://list.sipfoundry.org/archive/sipx-users/


-- 
Michael Picher, Director of Technical Services

eZuce, Inc.
300 Brickstone Square
Suite 201Andover, MA. 01810O.978-296-1005 X2015 

M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and 
those who don't.



___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
  ___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Michael Picher]

have many customers running with 3-5 servers...

your statement is incorrect.  i would say that your installation is
unstable with more than 2 servers.

mike

On Sat, Apr 14, 2012 at 3:14 AM, Nitin Mirchandani <
nitin_mirchand...@hotmail.com> wrote:

>  Of course I need to send profiles - But when its done, it starts failing
> in different ways.
> Each time error is different.
>
> If I switch off one server(redundant), and send profiels, it starts
> working again.
>
> Since its failing in different ways, and dns is correct (i have rechecked
> hundreds of times), I think sipx is unstable on 3 servers.
>
> --
> Date: Fri, 13 Apr 2012 09:44:09 -0400
> From: mpic...@ezuce.com
>
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
> you always need to send profiles after the server pulls down it's
> configuration stuff...
>
> On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:
>
> 2012/4/13 Nitin Mirchandani 
>
>  Hello
> Installed it 5 or 6 time.
> Now, the third server has come with "service disabled"
>
> Maybe - 4.4 doesnot support more than 2 servers?
>
>
> Send profiles to that particular server
>
> George
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
>
> 
> There are 10 kinds of people in the world, those who understand binary and
> those who don't.
>
>
> ___ sipx-users mailing list
> sipx-users@list.sipfoundry.org List Archive:
> http://list.sipfoundry.org/archive/sipx-users/
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and
those who don't.
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Todd Hodgen]

Have you tried setting this up in a lab, with your three servers, and
sipXecs as the DNS to see how they play together.  Get your lab successfully
built, and apply what you learn from that configuration to a network with
another DNS server setup.

 

 

From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Nitin
Mirchandani
Sent: Saturday, April 14, 2012 12:14 AM
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

 

Of course I need to send profiles - But when its done, it starts failing in
different ways.
Each time error is different.
 
If I switch off one server(redundant), and send profiels, it starts working
again.
 
Since its failing in different ways, and dns is correct (i have rechecked
hundreds of times), I think sipx is unstable on 3 servers.
 

  _  

Date: Fri, 13 Apr 2012 09:44:09 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

you always need to send profiles after the server pulls down it's
configuration stuff...

On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

2012/4/13 Nitin Mirchandani 

Hello 
Installed it 5 or 6 time.
Now, the third server has come with "service disabled"
 
Maybe - 4.4 doesnot support more than 2 servers?

 

 

Send profiles to that particular server

 

George 


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/





 

-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810

O.978-296-1005 X2015 
M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com

 




There are 10 kinds of people in the world, those who understand binary and
those who don't.



___ sipx-users mailing list
sipx-users@list.sipfoundry.org List Archive:
http://list.sipfoundry.org/archive/sipx-users/

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Todd Hodgen]

Doubtful, there are customers running with more than 3 servers.

 

From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Nitin
Mirchandani
Sent: Saturday, April 14, 2012 12:14 AM
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

 

Of course I need to send profiles - But when its done, it starts failing in
different ways.
Each time error is different.
 
If I switch off one server(redundant), and send profiels, it starts working
again.
 
Since its failing in different ways, and dns is correct (i have rechecked
hundreds of times), I think sipx is unstable on 3 servers.
 

  _  

Date: Fri, 13 Apr 2012 09:44:09 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

you always need to send profiles after the server pulls down it's
configuration stuff...

On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

2012/4/13 Nitin Mirchandani 

Hello 
Installed it 5 or 6 time.
Now, the third server has come with "service disabled"
 
Maybe - 4.4 doesnot support more than 2 servers?

 

 

Send profiles to that particular server

 

George 


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/





 

-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810

O.978-296-1005 X2015 
M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com

 




There are 10 kinds of people in the world, those who understand binary and
those who don't.



___ sipx-users mailing list
sipx-users@list.sipfoundry.org List Archive:
http://list.sipfoundry.org/archive/sipx-users/

___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Nitin Mirchandani]

Of course I need to send profiles - But when its done, it starts failing in 
different ways.Each time error is different. If I switch off one 
server(redundant), and send profiels, it starts working again. Since its 
failing in different ways, and dns is correct (i have rechecked hundreds of 
times), I think sipx is unstable on 3 servers.
 Date: Fri, 13 Apr 2012 09:44:09 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

you always need to send profiles after the server pulls down it's configuration 
stuff...

On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

2012/4/13 Nitin Mirchandani 






Hello 
Installed it 5 or 6 time.
Now, the third server has come with "service disabled"
 
Maybe - 4.4 doesnot support more than 2 servers?




Send profiles to that particular server
George 


___

sipx-users mailing list

sipx-users@list.sipfoundry.org

List Archive: http://list.sipfoundry.org/archive/sipx-users/


-- 
Michael Picher, Director of Technical Services

eZuce, Inc.
300 Brickstone Square
Suite 201Andover, MA. 01810O.978-296-1005 X2015 

M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and 
those who don't.


___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
  ___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Michael Picher]

you always need to send profiles after the server pulls down it's
configuration stuff...

On Fri, Apr 13, 2012 at 9:27 AM, George Niculae  wrote:

> 2012/4/13 Nitin Mirchandani 
>
>>  Hello
>> Installed it 5 or 6 time.
>> Now, the third server has come with "service disabled"
>>
>> Maybe - 4.4 doesnot support more than 2 servers?
>>
>>
> Send profiles to that particular server
>
> George
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher 
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and
those who don't.
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[George Niculae]

2012/4/13 Nitin Mirchandani 

>  Hello
> Installed it 5 or 6 time.
> Now, the third server has come with "service disabled"
>
> Maybe - 4.4 doesnot support more than 2 servers?
>
>
Send profiles to that particular server

George
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Nitin Mirchandani]

Hello Installed it 5 or 6 time.Now, the third server has come with "service 
disabled" Maybe - 4.4 doesnot support more than 2 servers?Servers   
   l4.uae.local  Warning: 
Restarting services causes service interruption. Do it only if a service 
requires restart or is not working properly. In such case you might want to 
take a snapshot and report an issue.   Refresh every   30   
   seconds This page will refresh automatically. You can 
switch automatic refreshing off by clearing the Refresh checkbox.
You can also modify the refresh interval by clicking on the current interval 
and then enter a new value.NameStatus  Role  CDR HA Tunnel  
  DisabledRedundant SIP Router  Media Relay 
 DisabledRedundant SIP Router  SIP Registrar  
DisabledRedundant SIP Router  SIP Proxy  
DisabledRedundant SIP Router
 > Date: Fri, 13 Apr 2012 05:15:41 -0400
> From: dhub...@ezuce.com
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
> 
> On Fri, Apr 13, 2012 at 1:01 AM, Nitin Mirchandani
>  wrote:
> > Hello
> >
> > Is there a lmitation of HA setup in which we cannot have more than 2
> > servers?
> >
> > I added 3rd server and the whole system fails in different ways (phones stop
> > registering etc). If I remove any third server(other than master), the
> > system is stable again.
> >
> > Running 4.4 latest. The 3 servers are in different IP subnets and are
> > actually branch offices.
> 
> as long as addresses are routable, should work.  i think the gui will
> let you add up to 4 additional server for up to 5, but after 3 the
> chatter between the systems becomes detrimental to performance.
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
  ___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Michael Picher]

Ok, Nitin...  suit yourself...  i really don't know anything about these
things.

Mike

On Fri, Apr 13, 2012 at 8:31 AM, Nitin Mirchandani <
nitin_mirchand...@hotmail.com> wrote:

>  The problem is that if I add third server, second server goes ito
> "disabled'(ie, in server services - its disabed)
> Sometimes its third.
>
> Server is MS dns - with a separate domain which is not relicated.
> I have painstakingly entered the _sip entries with correct priorities.
>
> But then, Sip server works on dns thing - Its only phones which use SRV.
>
> I am talking about services not starting (failed resource, disabled etc).
>
> I will come up to phones (and SRV) when the system is stable (ie, both the
> secondary servers have serives running)
>
> Rgds
> Nitin
>
> --
> Date: Fri, 13 Apr 2012 06:52:39 -0400
> From: mpic...@ezuce.com
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] HA setup with more than 2 redundant servers
>
>
> alright, everybody knows I'm going here...
>
> sounds like DNS to me...
>
> make sure tcp sip service records have higher (lower number) priority than
> all of the udp records.
>
> test dns from all locations in the same manner a phone would get an ip and
> use dns.
>
> you'll not want to rely on windows servers for dns at all locations.
>  you'll want to use bind views or separate dns zone files on each proxy to
> have phones pick their closest dns / proxy.
>
> see wiki re: dns and bind views
>
> Mike
>
> On Fri, Apr 13, 2012 at 1:01 AM, Nitin Mirchandani <
> nitin_mirchand...@hotmail.com> wrote:
>
>  Hello
>
> Is there a lmitation of HA setup in which we cannot have more than 2
> servers?
>
> I added 3rd server and the whole system fails in different ways (phones
> stop registering etc). If I remove any third server(other than master), the
> system is stable again.
>
> Running 4.4 latest. The 3 servers are in different IP subnets and are
> actually branch offices.
>
> Rgds
> Nitin
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
>
> --
> Michael Picher, Director of Technical Services
> eZuce, Inc.
>
> 300 Brickstone Square
>
> Suite 201
>
> Andover, MA. 01810
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
>
> 
> There are 10 kinds of people in the world, those who understand binary and
> those who don't.
>
>
> ___ sipx-users mailing list
> sipx-users@list.sipfoundry.org List Archive:
> http://list.sipfoundry.org/archive/sipx-users/
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and
those who don't.
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Nitin Mirchandani]

The problem is that if I add third server, second server goes ito 
"disabled'(ie, in server services - its disabed)Sometimes its third. Server is 
MS dns - with a separate domain which is not relicated.I have painstakingly 
entered the _sip entries with correct priorities. But then, Sip server works on 
dns thing - Its only phones which use SRV. I am talking about services not 
starting (failed resource, disabled etc). I will come up to phones (and SRV) 
when the system is stable (ie, both the secondary servers have serives running) 
RgdsNitin
 Date: Fri, 13 Apr 2012 06:52:39 -0400
From: mpic...@ezuce.com
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] HA setup with more than 2 redundant servers

alright, everybody knows I'm going here...
sounds like DNS to me...
make sure tcp sip service records have higher (lower number) priority than all 
of the udp records.

test dns from all locations in the same manner a phone would get an ip and use 
dns.
you'll not want to rely on windows servers for dns at all locations.  you'll 
want to use bind views or separate dns zone files on each proxy to have phones 
pick their closest dns / proxy.

see wiki re: dns and bind views
Mike

On Fri, Apr 13, 2012 at 1:01 AM, Nitin Mirchandani 
 wrote:








Hello
 
Is there a lmitation of HA setup in which we cannot have more than 2 servers?
 
I added 3rd server and the whole system fails in different ways (phones stop 
registering etc). If I remove any third server(other than master), the system 
is stable again.

 
Running 4.4 latest. The 3 servers are in different IP subnets and are actually 
branch offices.
 
Rgds
Nitin
  

___

sipx-users mailing list

sipx-users@list.sipfoundry.org

List Archive: http://list.sipfoundry.org/archive/sipx-users/


-- 
Michael Picher, Director of Technical Services

eZuce, Inc.
300 Brickstone Square
Suite 201Andover, MA. 01810O.978-296-1005 X2015 

M.207-956-0262
@mpicher <http://twitter.com/mpicher> 
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and 
those who don't.



___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
  ___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Michael Picher]

alright, everybody knows I'm going here...

sounds like DNS to me...

make sure tcp sip service records have higher (lower number) priority than
all of the udp records.

test dns from all locations in the same manner a phone would get an ip and
use dns.

you'll not want to rely on windows servers for dns at all locations.
 you'll want to use bind views or separate dns zone files on each proxy to
have phones pick their closest dns / proxy.

see wiki re: dns and bind views

Mike

On Fri, Apr 13, 2012 at 1:01 AM, Nitin Mirchandani <
nitin_mirchand...@hotmail.com> wrote:

>  Hello
>
> Is there a lmitation of HA setup in which we cannot have more than 2
> servers?
>
> I added 3rd server and the whole system fails in different ways (phones
> stop registering etc). If I remove any third server(other than master), the
> system is stable again.
>
> Running 4.4 latest. The 3 servers are in different IP subnets and are
> actually branch offices.
>
> Rgds
> Nitin
>
> ___
> sipx-users mailing list
> sipx-users@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>



-- 
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher 
www.ezuce.com


There are 10 kinds of people in the world, those who understand binary and
those who don't.
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Re: [sipx-users] HA setup with more than 2 redundant servers

[Douglas Hubler]

On Fri, Apr 13, 2012 at 1:01 AM, Nitin Mirchandani
 wrote:
> Hello
>
> Is there a lmitation of HA setup in which we cannot have more than 2
> servers?
>
> I added 3rd server and the whole system fails in different ways (phones stop
> registering etc). If I remove any third server(other than master), the
> system is stable again.
>
> Running 4.4 latest. The 3 servers are in different IP subnets and are
> actually branch offices.

as long as addresses are routable, should work.  i think the gui will
let you add up to 4 additional server for up to 5, but after 3 the
chatter between the systems becomes detrimental to performance.
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[sipx-users] HA setup with more than 2 redundant servers

[Nitin Mirchandani]

Hello Is there a lmitation of HA setup in which we cannot have more than 2 
servers? I added 3rd server and the whole system fails in different ways 
(phones stop registering etc). If I remove any third server(other than master), 
the system is stable again. Running 4.4 latest. The 3 servers are in different 
IP subnets and are actually branch offices. RgdsNitin   
   ___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/