[RCSE] Wanted: Used Slope plane to practise DSing
Would like something with a RG15 wing -- preferably carbon -- to practise DSing. Don't care what it looks like, as long as it flies well. Prefer something that is easier to repair :) I guess that a renegade or similar would be perfect. thanks Guy RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] really thin servo wire?
[EMAIL PROTECTED] wrote: Where can I get some real small servo wire for my aileron I tried some 24 gage ribbon wire from Radio Shack, (it had 4 wires and I just stripped of the green wire) but it is just too big and wont fit down the aileron tunnel The servo's I am using are Cirrus 10's. I just need the wire, not extensions, no space for plugs either. Yuo can get #29 wire from Cannon R/C. Their phone # is: 702-896-7203 I just recently got some myself. It *IS* pricey, at 60 cents per foot. But when you want to save grams, or have a really tight space to fit, it's the way to go. I'll take note that some servos under high load might have a bit of a problem drawing high current using such small wire. - George Gassaway RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] really thin servo wire?
FMA direct has some good thin servo wire. Charles Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Re: [RCSE] hlg aileron push rods?
Patrick, We use .025 MW pushrods in the Advantage HL kit we sell. We do a 'z' bend at the ruddervators and then use Dubro EZ connectors at the servos. These small brass connectors have a hole thru for the rod and a screw from the top to clamp the wire and a plastic push-on keeper on the bottom side of the servo arm. We replace the supplied screw with a 2-56 set screw. This does two things it keeps the overall height to a minimum for this type of connection and it allows you to get a good 'bite' on the .025 wire. The supplied socket head cap screw will bottom out on the underside of the head before it will clamp on the small dia, wire. This provides very quick and easy adjustment. Do the final dial-in with your sub-trims. RB Patrick Sloan wrote: Group, I am building my Colibri 1m hlg. I am building it with ailerons and was wondering if there is an alternative to the music wire push rods? Any good ideas out there? The music wire push rods to me seem to be adequate, but I suspect that they would be a pain to get adjusted right. Thanks for any suggestions. Any online sources to purchase? Pat. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Vaccum system
I am looking for a vacuum bagging system if there are any available used or at a reasonable cost. -- Greg Nuspel "The whole of science is nothing more than a refinement of everyday thinking" -- Albert Einstein Home Page http://members.home.com/gregsdiversions Clubs Page http://www.cadvision.com/crcss RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] Kevlar fabric for sale - CHEAP
Deal of the month. 5 oz kevlar - 39" inches (meter) wide. I came across a close out roll. Here's how I'm going to price it out. I don't want to deal with 1/2 yards, 2/5 yards etc. (you know who you are). $12.00 per yard for 3 yards minimum $11.00 per yard for 5 yards minimum. $10.00 per yard for 10 yards or more. If you want a lot (I've got a load!) and you want special pricing, e-mail and we can work something out. Shipping charges will be purchaser's responsibility. I can be reached via e-mail at [EMAIL PROTECTED] Phone - home 504 899 8084 office 504 734-0006
[RCSE] Flamingo HLG for sale
Hi Guys, I am selling my Flamingo HLG. Barely flown--only one round at the IHLGF. Will sell loaded with 4 HS-50 servos, Berg Rx (sans xtal) and two custom batteries for $385, or the plane only for $195. Flies amazing at only 8.5oz! Please reply directly to mailto:[EMAIL PROTECTED] Steve
[RCSE] Slopes in Santa Barbara
Any good slopes in Santa Barbara ? Jim and Mary Jo Jacobson RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
[RCSE] SkyBench Big Bird Kit!
Gents, I have located a kit ( NIB ) for saleI think it is called a " Big Bird " and it is made by SkyBench AeroTech. I had a look in the box and it is 3m and looks much like the " Bird of Time " yet it is 100' not a 118". The wood looks great and the ribs and formers are laser cut. Does anyone have an opinion on this kit and how it flew..I checked the SkyBench website but this model is not present. Thanks . Gerry