Re: [RCSE] trouble with balsa dust
I have used a 20x20 furnace filter taped to the intake side of a cheap box fan to control balsa dust. If you lightly spray the filter with some Endust and keep your work directly in front of it the dust is sucked right to the filter and stays. Brent RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
BTW I have found that a 24 inch window fan in front of you with the air forced thru a furnace filter works as well and you do not have the damed mask on the face. Ed Granger
Re: [RCSE] trouble with balsa dust
Richard Hallett wrote: Does an ionizer that strongly puts that pungent corona smell in the air make the dust settle faster? That sounds like ozone (metallic smell). It isn't healthy. -- Andrew E. Mileski RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
I have been allergic to lots of stuff, including dust, since childhood. Several years ago my doc suggested Claritin, which is now generic and not too pricey. Works for me. Tom H. Nagel Columbus, OH - Original Message - From: Andrew E Mileski [EMAIL PROTECTED] To: soaring@airage.com Sent: Wednesday, April 20, 2005 1:45 PM Subject: Re: [RCSE] trouble with balsa dust Richard Hallett wrote: Does an ionizer that strongly puts that pungent corona smell in the air make the dust settle faster? That sounds like ozone (metallic smell). It isn't healthy. -- Andrew E. Mileski RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
As someone who has a touch of asthma to begin with, I take dust pretty seriously. Though I've not yet developed an allergy to it yet, any serious sanding session will find me with a ring around my nose and mouth when I'm done. BTW, it's not the charcoal canisters you need for balsa (though they won't hurt), its the HEPA (high efficiency particulate air) filter you want. They usually double stack a chem absorber and the dust cartridge. Make sure the seal is pretty good by putting your hands over the ends to block the air and see if you can pull a reasonable vacuum inside. Tighten, adjust or replace if you can't get a good fit. Not all masks fit all people and they come in different sizes. Mine leaks a bit by my nose, so I have to adjust it a little lower than what the natural wear position would be (maybe it would be easier to get the nose adjusted - nah). Dust off in the workshop if you can. The dust settles pretty quick when using coarse paper, but don't be afraid to leave the mask on until the outer layer of clothing is off. Oh and vacuum the shop before starting the covering (I hated adding that part). Hopefully the eye exposure doesn't cause any problems. I don't know if this is as inevitable as the epoxy allergy, but others may still want to learn from it. Tom Koszuta Western New York Sailplane and Electric Flyers Buffalo, NY - Original Message - From: Ben Diss [EMAIL PROTECTED] To: Ed Berris [EMAIL PROTECTED] Cc: soaring@airage.com Sent: Sunday, April 17, 2005 8:52 PM Subject: Re: [RCSE] trouble with balsa dust Well Ed, you're screwed. I've got the same thing. Happened a few years ago. Best I can suggest it to get a charcoal respirator and avoid Balsa. The respirator works good so long as you wear it. Trouble is, when you're done the dust is all over your closes and everything in your shop. Take it off and breathe in the dust and hope your Kleenex box is full. I got one of those big Jet filters hanging from my shop ceiling and that helps control the dust, but some is still left on everything else in the shop. I've got good at attaching a vacuum to my power tools and that works well even with out the respirator. For ol' fashioned sanding with a block however there is no magic bullet. -Ben Ed Berris wrote: I realize this is not a medical forum, however, I suspect that others of you have had some experience with reactions to balsa dust. I seem to have developed quite a sensitivity to balsa dust. With just a small exposure it triggers asthma like symptoms including a nagging cough, wheezing, a tightness in my chest and sometime dizziness or severe cold like symptoms. I wonder if others have had a similar experience and what they are doing so that they can continue working with balsa without becoming ill. I know that a good quality dust mask will be a must. I have seldom worn on in the past but I can see that I will need to now. Miserable in Minnesota, Ed RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
Does an ionizer that strongly puts that pungent corona smell in the air make the dust settle faster? Rick Richard Hallett Pittsfield ME Thomas Koszuta wrote: As someone who has a touch of asthma to begin with, I take dust pretty seriously. Though I've not yet developed an allergy to it yet, any serious sanding session will find me with a ring around my nose and mouth when I'm done. BTW, it's not the charcoal canisters you need for balsa (though they won't hurt), its the HEPA (high efficiency particulate air) filter you want. They usually double stack a chem absorber and the dust cartridge. Make sure the seal is pretty good by putting your hands over the ends to block the air and see if you can pull a reasonable vacuum inside. Tighten, adjust or replace if you can't get a good fit. Not all masks fit all people and they come in different sizes. Mine leaks a bit by my nose, so I have to adjust it a little lower than what the natural wear position would be (maybe it would be easier to get the nose adjusted - nah). Dust off in the workshop if you can. The dust settles pretty quick when using coarse paper, but don't be afraid to leave the mask on until the outer layer of clothing is off. Oh and vacuum the shop before starting the covering (I hated adding that part). Hopefully the eye exposure doesn't cause any problems. I don't know if this is as inevitable as the epoxy allergy, but others may still want to learn from it. Tom Koszuta Western New York Sailplane and Electric Flyers Buffalo, NY - Original Message - From: Ben Diss [EMAIL PROTECTED] To: Ed Berris [EMAIL PROTECTED] Cc: soaring@airage.com Sent: Sunday, April 17, 2005 8:52 PM Subject: Re: [RCSE] trouble with balsa dust Well Ed, you're screwed. I've got the same thing. Happened a few years ago. Best I can suggest it to get a charcoal respirator and avoid Balsa. The respirator works good so long as you wear it. Trouble is, when you're done the dust is all over your closes and everything in your shop. Take it off and breathe in the dust and hope your Kleenex box is full. I got one of those big Jet filters hanging from my shop ceiling and that helps control the dust, but some is still left on everything else in the shop. I've got good at attaching a vacuum to my power tools and that works well even with out the respirator. For ol' fashioned sanding with a block however there is no magic bullet. -Ben Ed Berris wrote: I realize this is not a medical forum, however, I suspect that others of you have had some experience with reactions to balsa dust. I seem to have developed quite a sensitivity to balsa dust. With just a small exposure it triggers asthma like symptoms including a nagging cough, wheezing, a tightness in my chest and sometime dizziness or severe cold like symptoms. I wonder if others have had a similar experience and what they are doing so that they can continue working with balsa without becoming ill. I know that a good quality dust mask will be a must. I have seldom worn on in the past but I can see that I will need to now. Miserable in Minnesota, Ed RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
I use a Rainbow vacuum in my shop. the advantage of the rainbow is all the air and dust must go through a water bath for filtration before the air comes back out for you to breath. A regular shop vac and house vac uses a paper filter or baggless system for filtration so it lets allot of dust back out for you to breath. If you would like me to tell you more contact me offline and I will tell you more about how it works...it works because wet dust can't fly Clarence Ashcraft ([EMAIL PROTECTED]) President of IMSF - 2005 InterMountain Silent Flyers Home of Soar Utah If you would like to learn to fly R/C gliders and electrics, contact our club at: http://www.silentflyer.org - Original Message - From: Ed Berris [EMAIL PROTECTED] To: soaring@airage.com Sent: Sunday, April 17, 2005 4:24 PM Subject: [RCSE] trouble with balsa dust I realize this is not a medical forum, however, I suspect that others of you have had some experience with reactions to balsa dust. I seem to have developed quite a sensitivity to balsa dust. With just a small exposure it triggers asthma like symptoms including a nagging cough, wheezing, a tightness in my chest and sometime dizziness or severe cold like symptoms. I wonder if others have had a similar experience and what they are doing so that they can continue working with balsa without becoming ill. I know that a good quality dust mask will be a must. I have seldom worn on in the past but I can see that I will need to now. Miserable in Minnesota, Ed RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] trouble with balsa dust
I realize this is not a medical forum, however, I suspect that others of you have had some experience with reactions to balsa dust. I seem to have developed quite a sensitivity to balsa dust. With just a small exposure it triggers asthma like symptoms including a nagging cough, wheezing, a tightness in my chest and sometime dizziness or severe cold like symptoms. I wonder if others have had a similar experience and what they are doing so that they can continue working with balsa without becoming ill. I know that a good quality dust mask will be a must. I have seldom worn on in the past but I can see that I will need to now. Miserable in Minnesota, Ed RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
Re: [RCSE] trouble with balsa dust
Well Ed, you're screwed. I've got the same thing. Happened a few years ago. Best I can suggest it to get a charcoal respirator and avoid Balsa. The respirator works good so long as you wear it. Trouble is, when you're done the dust is all over your closes and everything in your shop. Take it off and breathe in the dust and hope your Kleenex box is full. I got one of those big Jet filters hanging from my shop ceiling and that helps control the dust, but some is still left on everything else in the shop. I've got good at attaching a vacuum to my power tools and that works well even with out the respirator. For ol' fashioned sanding with a block however there is no magic bullet. -Ben Ed Berris wrote: I realize this is not a medical forum, however, I suspect that others of you have had some experience with reactions to balsa dust. I seem to have developed quite a sensitivity to balsa dust. With just a small exposure it triggers asthma like symptoms including a nagging cough, wheezing, a tightness in my chest and sometime dizziness or severe cold like symptoms. I wonder if others have had a similar experience and what they are doing so that they can continue working with balsa without becoming ill. I know that a good quality dust mask will be a must. I have seldom worn on in the past but I can see that I will need to now. Miserable in Minnesota, Ed RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
