[Soekris] net4801-60 died
Hi there, I wonder if you have any suggestions of what I could try next. My net4801-60 based firewall (running IPCop) has suddenly died yesterday, after running for half a year without any problems. When I power up the unit the power LED comes on and the error LED keeps flashing. This suggests to me that the system doesn't even get to the BIOS? Any suggestions? Cheers magi ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] net4801-60 died
On Wed, Sep 19, 2007 at 08:23:49AM +0100, magnus.hagdorn wrote: Hi there, I wonder if you have any suggestions of what I could try next. My net4801-60 based firewall (running IPCop) has suddenly died yesterday, after running for half a year without any problems. When I power up the unit the power LED comes on and the error LED keeps flashing. This suggests to me that the system doesn't even get to the BIOS? Connect the console and see what happens. The most common problems are defective power supply and early panic in your operating system, which might be because of a corrupted CF. -- B.Walterhttp://www.bwct.de http://www.fizon.de [EMAIL PROTECTED] [EMAIL PROTECTED][EMAIL PROTECTED] ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
[Soekris] net5501 SATA disk
Hi list, I've connected a 2.5 SATA drive to the Net5501 but it's not detected in bios. It's a generic problem with any sata disk? How to Resolve Problems? Thank you ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] net5501 SATA disk
In message [EMAIL PROTECTED], SeDoFa writes: I've connected a 2.5 SATA drive to the Net5501 but it's not detected in bios. It's a generic problem with any sata disk? It's bug which has crept back into the bios, Søren is working on a fix. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] net4801-60 died
Hi I would pop out the CF and any other cards. That would at least narrow down the cause of the failure. Swapping the power supply is probably a good idea as well. Bob On Sep 19, 2007, at 3:23 AM, magnus.hagdorn wrote: Hi there, I wonder if you have any suggestions of what I could try next. My net4801-60 based firewall (running IPCop) has suddenly died yesterday, after running for half a year without any problems. When I power up the unit the power LED comes on and the error LED keeps flashing. This suggests to me that the system doesn't even get to the BIOS? Any suggestions? Cheers magi ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] soekris net5501 + reboot problem
* Peter van Oord van der Vlies wrote: Hi, I have recently bought a new net5501, it works fine except when i give the device a reboot then he doesn't boots anymore from the hdd. I have seen that many people have the same problem. Is there anyone that have a workaround or solutions for this problem ? same problem here, too ;) I guess it's a bios problem and I heard rumours that it is being worked on. - mb ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] openbsd won't boot from net4801 after pxe installation
On Wednesday, September 19, 2007 at 08:40:50 -0700, Vincent Li wrote: snip Then I typed reboot at prompt, it reboot and hangs here: --- boot booting hd0a:/bsd:5567348+871228 [52+283664+263996]=0x6a9ba4 entry point at 0x200120 - does this mean that the bootloader boot OpenBSD from address 0x200120 and could not find the boot partition? do I have a faulty CF because of pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20? Looks like the system isn't using the serial console. Please try to enter boot set tty com0 boot set stty 19200 at the boot prompt and see how it goes. If this works, put these lines in /etc/boot.conf. Mauriace ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
Re: [Soekris] openbsd won't boot from net4801 after pxe installation
Looks like the system isn't using the serial console. The installer asks near the end whether you'd like to use a serial console. Answering this 'yes' saves a lot of trouble... Now I can see the booting message, but I can't see the login prompt, it stops here: The serial console isn't turned on in /etc/ttys. ___ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
