Re: ICE tutorials for beginner.
하하 안녕하세요. 강병철 맞습니다. 마초님이시군요! 다시 소프트이미지를 잡으셨네요. 이곳에서 만나 반갑습니다. ICE 공부 열심히하세요. Good Luck!! 2013/5/27 Daniel Kim > Hey Byungchul > > Yes I am Korean~! @_@ > > 안녕하세요 병철씨. 강병철씨죠? 한국에서 뵈었던것 같은데, 저 마촙니다. ^^ 혹시 다른분이시라면 죄송하구요. > > > On 27/05/2013, at 8:15 PM, Byungchul Kang wrote: > > Hello! Kim. > Are you Korean? > if you check out here... > > Kang > > > 2013/5/24 Alan Fregtman > >> =] >> >> There's also the *TD Survival* videos me and *Miquel Campos* have been >> cranking out weekly for the past little bit: >> https://vimeo.com/tdsurvival/videos >> >> You can find the ICE-specific ones in this vimeo album: >> https://vimeo.com/album/2383314 >> (They're more practical than they are fancy, but they're easy to follow >> along.) >> >> >> If you dig the videos, like us on Facebook? ;) >> http://facebook.com/tdsurvival >> >> >> >> On Fri, May 24, 2013 at 5:28 AM, Paul Griswold < >> pgrisw...@fusiondigitalproductions.com> wrote: >> >>> I second that. Watch everything Paul Smith has posted on Vimeo: >>> https://vimeo.com/pooby >>> >>> He's a "regular guy", not a TD, so he explains things in an easier to >>> digest manner. >>> >>> Eric T has a Softimage Tutorials channel that has ICE stuff (though, >>> ehem, it hasn't been updated in a year): >>> https://vimeo.com/groups/softimagetutorials >>> >>> There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, >>> ehem, it hasn't been updated in TWO years): >>> https://vimeo.com/groups/ice >>> >>> And on YouTube there 's the SoftimageHowTos Channel: >>> http://www.youtube.com/user/SoftimageHowTos >>> >>> >>> HTH >>> >>> Paul >>> >>> (in case my joking attitude doesn't translate properly to email... Eric, >>> Alan, I'm just giving you guys a hard time all your work is very much >>> appreciated) >>> >>> >>> >>> >>> >>> On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: >>> >>>> Wow, quick response~! Thanks guys :D >>>> I will check all of those resources. Thank you guys so much :D >>>> >>>> Dan >>>> >>>> >>>> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >>>> >>>>> Check out Paul Smith on Vimeo, too. >>>>> His tutorials on ICE are AMAZING. >>>>> >>>>> -Original Message- >>>>> From: softimage-boun...@listproc.autodesk.com >>>>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>>>> jeannel >>>>> Sent: Friday, May 24, 2013 3:50 PM >>>>> To: softimage@listproc.autodesk.com >>>>> Subject: Re: ICE tutorials for beginner. >>>>> >>>>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>>>> date) tutorials. Gold basics to understand vectors and velocity. >>>>> >>>>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>>>> > Hey guys. >>>>> > >>>>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>>>> > I am totally beginner for ICE, and also have no back ground education >>>>> > for programming stuff, but I like to learn basic ICE with step by >>>>> step >>>>> > tutorial. >>>>> > If anyone knows, please share or show me website link. >>>>> > >>>>> > Thanks >>>>> > Daniel >>>>> > >>>>> > -- >>>>> > --- >>>>> > Daniel Kim >>>>> > Animation Director & Professional 3D Generalist >>>>> > http://www.danielkim3d.com >>>>> > --- >>>>> > >>>>> > >>>>> >>>>> >>>> >>>> >>>> -- >>>> --- >>>> Daniel Kim >>>> Animation Director & Professional 3D Generalist >>>> http://www.danielkim3d.com >>>> --- >>>> >>>> >>>> >>> >> > > > -- > *Byungchul Kang* | MBC CG TEAM [http://imbc.com] > http://cgndev.com > > > -- *Byungchul Kang* | MBC CG TEAM [http://imbc.com] http://cgndev.com
Re: ICE tutorials for beginner.
Hey Byungchul Yes I am Korean~! @_@ 안녕하세요 병철씨. 강병철씨죠? 한국에서 뵈었던것 같은데, 저 마촙니다. ^^ 혹시 다른분이시라면 죄송하구요. On 27/05/2013, at 8:15 PM, Byungchul Kang mailto:k...@cgndev.com>> wrote: Hello! Kim. Are you Korean? if you check out here... Kang 2013/5/24 Alan Fregtman mailto:alan.fregt...@gmail.com>> =] There's also the TD Survival videos me and Miquel Campos have been cranking out weekly for the past little bit: https://vimeo.com/tdsurvival/videos You can find the ICE-specific ones in this vimeo album: https://vimeo.com/album/2383314 (They're more practical than they are fancy, but they're easy to follow along.) If you dig the videos, like us on Facebook? ;) http://facebook.com/tdsurvival On Fri, May 24, 2013 at 5:28 AM, Paul Griswold mailto:pgrisw...@fusiondigitalproductions.com>> wrote: I second that. Watch everything Paul Smith has posted on Vimeo: https://vimeo.com/pooby He's a "regular guy", not a TD, so he explains things in an easier to digest manner. Eric T has a Softimage Tutorials channel that has ICE stuff (though, ehem, it hasn't been updated in a year): https://vimeo.com/groups/softimagetutorials There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, it hasn't been updated in TWO years): https://vimeo.com/groups/ice And on YouTube there 's the SoftimageHowTos Channel: http://www.youtube.com/user/SoftimageHowTos HTH Paul (in case my joking attitude doesn't translate properly to email... Eric, Alan, I'm just giving you guys a hard time all your work is very much appreciated) On Fri, May 24, 2013 at 3:16 AM, Daniel Kim mailto:danielki...@gmail.com>> wrote: Wow, quick response~! Thanks guys :D I will check all of those resources. Thank you guys so much :D Dan On Fri, May 24, 2013 at 6:55 PM, Jack Kao mailto:jack@grapecity.com>> wrote: Check out Paul Smith on Vimeo, too. His tutorials on ICE are AMAZING. -Original Message- From: softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> [mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>] On Behalf Of olivier jeannel Sent: Friday, May 24, 2013 3:50 PM To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com> Subject: Re: ICE tutorials for beginner. Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by date) tutorials. Gold basics to understand vectors and velocity. Le 24/05/2013 08:43, Daniel Kim a écrit : > Hey guys. > > Anyone know simple and easy to follow ICE tutorials for beginners? > I am totally beginner for ICE, and also have no back ground education > for programming stuff, but I like to learn basic ICE with step by step > tutorial. > If anyone knows, please share or show me website link. > > Thanks > Daniel > > -- > --- > Daniel Kim > Animation Director & Professional 3D Generalist > http://www.danielkim3d.com<http://www.danielkim3d.com/> > --- > > -- --- Daniel Kim Animation Director & Professional 3D Generalist http://www.danielkim3d.com<http://www.danielkim3d.com/> --- -- Byungchul Kang | MBC CG TEAM [http://imbc.com<http://imbc.com/>] http://cgndev.com<http://cgndev.com/>
Re: ICE tutorials for beginner.
Hello! Kim. Are you Korean? if you check out here... Kang 2013/5/24 Alan Fregtman > =] > > There's also the *TD Survival* videos me and *Miquel Campos* have been > cranking out weekly for the past little bit: > https://vimeo.com/tdsurvival/videos > > You can find the ICE-specific ones in this vimeo album: > https://vimeo.com/album/2383314 > (They're more practical than they are fancy, but they're easy to follow > along.) > > > If you dig the videos, like us on Facebook? ;) > http://facebook.com/tdsurvival > > > > On Fri, May 24, 2013 at 5:28 AM, Paul Griswold < > pgrisw...@fusiondigitalproductions.com> wrote: > >> I second that. Watch everything Paul Smith has posted on Vimeo: >> https://vimeo.com/pooby >> >> He's a "regular guy", not a TD, so he explains things in an easier to >> digest manner. >> >> Eric T has a Softimage Tutorials channel that has ICE stuff (though, >> ehem, it hasn't been updated in a year): >> https://vimeo.com/groups/softimagetutorials >> >> There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, >> it hasn't been updated in TWO years): https://vimeo.com/groups/ice >> >> And on YouTube there 's the SoftimageHowTos Channel: >> http://www.youtube.com/user/SoftimageHowTos >> >> >> HTH >> >> Paul >> >> (in case my joking attitude doesn't translate properly to email... Eric, >> Alan, I'm just giving you guys a hard time all your work is very much >> appreciated) >> >> >> >> >> >> On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: >> >>> Wow, quick response~! Thanks guys :D >>> I will check all of those resources. Thank you guys so much :D >>> >>> Dan >>> >>> >>> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >>> >>>> Check out Paul Smith on Vimeo, too. >>>> His tutorials on ICE are AMAZING. >>>> >>>> -Original Message- >>>> From: softimage-boun...@listproc.autodesk.com >>>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>>> jeannel >>>> Sent: Friday, May 24, 2013 3:50 PM >>>> To: softimage@listproc.autodesk.com >>>> Subject: Re: ICE tutorials for beginner. >>>> >>>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>>> date) tutorials. Gold basics to understand vectors and velocity. >>>> >>>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>>> > Hey guys. >>>> > >>>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>>> > I am totally beginner for ICE, and also have no back ground education >>>> > for programming stuff, but I like to learn basic ICE with step by step >>>> > tutorial. >>>> > If anyone knows, please share or show me website link. >>>> > >>>> > Thanks >>>> > Daniel >>>> > >>>> > -- >>>> > --- >>>> > Daniel Kim >>>> > Animation Director & Professional 3D Generalist >>>> > http://www.danielkim3d.com >>>> > --- >>>> > >>>> > >>>> >>>> >>> >>> >>> -- >>> --- >>> Daniel Kim >>> Animation Director & Professional 3D Generalist >>> http://www.danielkim3d.com >>> --- >>> >>> >>> >> > -- *Byungchul Kang* | MBC CG TEAM [http://imbc.com] http://cgndev.com
Re: ICE tutorials for beginner.
=] There's also the *TD Survival* videos me and *Miquel Campos* have been cranking out weekly for the past little bit: https://vimeo.com/tdsurvival/videos You can find the ICE-specific ones in this vimeo album: https://vimeo.com/album/2383314 (They're more practical than they are fancy, but they're easy to follow along.) If you dig the videos, like us on Facebook? ;) http://facebook.com/tdsurvival On Fri, May 24, 2013 at 5:28 AM, Paul Griswold < pgrisw...@fusiondigitalproductions.com> wrote: > I second that. Watch everything Paul Smith has posted on Vimeo: > https://vimeo.com/pooby > > He's a "regular guy", not a TD, so he explains things in an easier to > digest manner. > > Eric T has a Softimage Tutorials channel that has ICE stuff (though, ehem, > it hasn't been updated in a year): > https://vimeo.com/groups/softimagetutorials > > There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, > it hasn't been updated in TWO years): https://vimeo.com/groups/ice > > And on YouTube there 's the SoftimageHowTos Channel: > http://www.youtube.com/user/SoftimageHowTos > > > HTH > > Paul > > (in case my joking attitude doesn't translate properly to email... Eric, > Alan, I'm just giving you guys a hard time all your work is very much > appreciated) > > > > > > On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: > >> Wow, quick response~! Thanks guys :D >> I will check all of those resources. Thank you guys so much :D >> >> Dan >> >> >> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >> >>> Check out Paul Smith on Vimeo, too. >>> His tutorials on ICE are AMAZING. >>> >>> -Original Message----- >>> From: softimage-boun...@listproc.autodesk.com >>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>> jeannel >>> Sent: Friday, May 24, 2013 3:50 PM >>> To: softimage@listproc.autodesk.com >>> Subject: Re: ICE tutorials for beginner. >>> >>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>> date) tutorials. Gold basics to understand vectors and velocity. >>> >>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>> > Hey guys. >>> > >>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>> > I am totally beginner for ICE, and also have no back ground education >>> > for programming stuff, but I like to learn basic ICE with step by step >>> > tutorial. >>> > If anyone knows, please share or show me website link. >>> > >>> > Thanks >>> > Daniel >>> > >>> > -- >>> > --- >>> > Daniel Kim >>> > Animation Director & Professional 3D Generalist >>> > http://www.danielkim3d.com >>> > --- >>> > >>> > >>> >>> >> >> >> -- >> --- >> Daniel Kim >> Animation Director & Professional 3D Generalist >> http://www.danielkim3d.com >> --- >> >> >> >
Re: ICE tutorials for beginner.
+1 for paul smiths, start with the oldest video 2013/5/24 Eric Thivierge > Good thing you posted that PS note Paul cause it didn't come off well for > being sarcastic. :) > > The tutorial group is pretty self sustaining actually. I peek in every now > and then to clear out spam videos though and add the videos that may have > gone unnoticed. > > Hey Dan, I'd recommend Thiago's videos on cmivfx.com. really worth while > when I got started. > On May 24, 2013 5:30 AM, "Paul Griswold" < > pgrisw...@fusiondigitalproductions.com> wrote: > >> I second that. Watch everything Paul Smith has posted on Vimeo: >> https://vimeo.com/pooby >> >> He's a "regular guy", not a TD, so he explains things in an easier to >> digest manner. >> >> Eric T has a Softimage Tutorials channel that has ICE stuff (though, >> ehem, it hasn't been updated in a year): >> https://vimeo.com/groups/softimagetutorials >> >> There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, >> it hasn't been updated in TWO years): https://vimeo.com/groups/ice >> >> And on YouTube there 's the SoftimageHowTos Channel: >> http://www.youtube.com/user/SoftimageHowTos >> >> >> HTH >> >> Paul >> >> (in case my joking attitude doesn't translate properly to email... Eric, >> Alan, I'm just giving you guys a hard time all your work is very much >> appreciated) >> >> >> >> >> >> On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: >> >>> Wow, quick response~! Thanks guys :D >>> I will check all of those resources. Thank you guys so much :D >>> >>> Dan >>> >>> >>> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >>> >>>> Check out Paul Smith on Vimeo, too. >>>> His tutorials on ICE are AMAZING. >>>> >>>> -Original Message- >>>> From: softimage-boun...@listproc.autodesk.com >>>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>>> jeannel >>>> Sent: Friday, May 24, 2013 3:50 PM >>>> To: softimage@listproc.autodesk.com >>>> Subject: Re: ICE tutorials for beginner. >>>> >>>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>>> date) tutorials. Gold basics to understand vectors and velocity. >>>> >>>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>>> > Hey guys. >>>> > >>>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>>> > I am totally beginner for ICE, and also have no back ground education >>>> > for programming stuff, but I like to learn basic ICE with step by step >>>> > tutorial. >>>> > If anyone knows, please share or show me website link. >>>> > >>>> > Thanks >>>> > Daniel >>>> > >>>> > -- >>>> > --- >>>> > Daniel Kim >>>> > Animation Director & Professional 3D Generalist >>>> > http://www.danielkim3d.com >>>> > --- >>>> > >>>> > >>>> >>>> >>> >>> >>> -- >>> --- >>> Daniel Kim >>> Animation Director & Professional 3D Generalist >>> http://www.danielkim3d.com >>> --- >>> >>> >>> >>
Re: ICE tutorials for beginner.
Good thing you posted that PS note Paul cause it didn't come off well for being sarcastic. :) The tutorial group is pretty self sustaining actually. I peek in every now and then to clear out spam videos though and add the videos that may have gone unnoticed. Hey Dan, I'd recommend Thiago's videos on cmivfx.com. really worth while when I got started. On May 24, 2013 5:30 AM, "Paul Griswold" < pgrisw...@fusiondigitalproductions.com> wrote: > I second that. Watch everything Paul Smith has posted on Vimeo: > https://vimeo.com/pooby > > He's a "regular guy", not a TD, so he explains things in an easier to > digest manner. > > Eric T has a Softimage Tutorials channel that has ICE stuff (though, ehem, > it hasn't been updated in a year): > https://vimeo.com/groups/softimagetutorials > > There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, > it hasn't been updated in TWO years): https://vimeo.com/groups/ice > > And on YouTube there 's the SoftimageHowTos Channel: > http://www.youtube.com/user/SoftimageHowTos > > > HTH > > Paul > > (in case my joking attitude doesn't translate properly to email... Eric, > Alan, I'm just giving you guys a hard time all your work is very much > appreciated) > > > > > > On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: > >> Wow, quick response~! Thanks guys :D >> I will check all of those resources. Thank you guys so much :D >> >> Dan >> >> >> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >> >>> Check out Paul Smith on Vimeo, too. >>> His tutorials on ICE are AMAZING. >>> >>> -----Original Message- >>> From: softimage-boun...@listproc.autodesk.com >>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>> jeannel >>> Sent: Friday, May 24, 2013 3:50 PM >>> To: softimage@listproc.autodesk.com >>> Subject: Re: ICE tutorials for beginner. >>> >>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>> date) tutorials. Gold basics to understand vectors and velocity. >>> >>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>> > Hey guys. >>> > >>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>> > I am totally beginner for ICE, and also have no back ground education >>> > for programming stuff, but I like to learn basic ICE with step by step >>> > tutorial. >>> > If anyone knows, please share or show me website link. >>> > >>> > Thanks >>> > Daniel >>> > >>> > -- >>> > --- >>> > Daniel Kim >>> > Animation Director & Professional 3D Generalist >>> > http://www.danielkim3d.com >>> > --- >>> > >>> > >>> >>> >> >> >> -- >> --- >> Daniel Kim >> Animation Director & Professional 3D Generalist >> http://www.danielkim3d.com >> --- >> >> >> >
Re: ICE tutorials for beginner.
Hi I also would suggest Paul Smith on Vimeo I started with ICE following his videos and within days understood enough to get to grips with my own projects. On Fri, May 24, 2013 at 10:28 AM, Paul Griswold < pgrisw...@fusiondigitalproductions.com> wrote: > I second that. Watch everything Paul Smith has posted on Vimeo: > https://vimeo.com/pooby > > He's a "regular guy", not a TD, so he explains things in an easier to > digest manner. > > Eric T has a Softimage Tutorials channel that has ICE stuff (though, ehem, > it hasn't been updated in a year): > https://vimeo.com/groups/softimagetutorials > > There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, > it hasn't been updated in TWO years): https://vimeo.com/groups/ice > > And on YouTube there 's the SoftimageHowTos Channel: > http://www.youtube.com/user/SoftimageHowTos > > > HTH > > Paul > > (in case my joking attitude doesn't translate properly to email... Eric, > Alan, I'm just giving you guys a hard time all your work is very much > appreciated) > > > > > > On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: > >> Wow, quick response~! Thanks guys :D >> I will check all of those resources. Thank you guys so much :D >> >> Dan >> >> >> On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: >> >>> Check out Paul Smith on Vimeo, too. >>> His tutorials on ICE are AMAZING. >>> >>> -Original Message----- >>> From: softimage-boun...@listproc.autodesk.com >>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >>> jeannel >>> Sent: Friday, May 24, 2013 3:50 PM >>> To: softimage@listproc.autodesk.com >>> Subject: Re: ICE tutorials for beginner. >>> >>> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >>> date) tutorials. Gold basics to understand vectors and velocity. >>> >>> Le 24/05/2013 08:43, Daniel Kim a écrit : >>> > Hey guys. >>> > >>> > Anyone know simple and easy to follow ICE tutorials for beginners? >>> > I am totally beginner for ICE, and also have no back ground education >>> > for programming stuff, but I like to learn basic ICE with step by step >>> > tutorial. >>> > If anyone knows, please share or show me website link. >>> > >>> > Thanks >>> > Daniel >>> > >>> > -- >>> > --- >>> > Daniel Kim >>> > Animation Director & Professional 3D Generalist >>> > http://www.danielkim3d.com >>> > --- >>> > >>> > >>> >>> >> >> >> -- >> --- >> Daniel Kim >> Animation Director & Professional 3D Generalist >> http://www.danielkim3d.com >> --- >> >> >> >
Re: ICE tutorials for beginner.
I second that. Watch everything Paul Smith has posted on Vimeo: https://vimeo.com/pooby He's a "regular guy", not a TD, so he explains things in an easier to digest manner. Eric T has a Softimage Tutorials channel that has ICE stuff (though, ehem, it hasn't been updated in a year): https://vimeo.com/groups/softimagetutorials There's also Alan Fregtman's Softimage ICE Videos on Vimeo (though, ehem, it hasn't been updated in TWO years): https://vimeo.com/groups/ice And on YouTube there 's the SoftimageHowTos Channel: http://www.youtube.com/user/SoftimageHowTos HTH Paul (in case my joking attitude doesn't translate properly to email... Eric, Alan, I'm just giving you guys a hard time all your work is very much appreciated) On Fri, May 24, 2013 at 3:16 AM, Daniel Kim wrote: > Wow, quick response~! Thanks guys :D > I will check all of those resources. Thank you guys so much :D > > Dan > > > On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: > >> Check out Paul Smith on Vimeo, too. >> His tutorials on ICE are AMAZING. >> >> -Original Message- >> From: softimage-boun...@listproc.autodesk.com >> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier >> jeannel >> Sent: Friday, May 24, 2013 3:50 PM >> To: softimage@listproc.autodesk.com >> Subject: Re: ICE tutorials for beginner. >> >> Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by >> date) tutorials. Gold basics to understand vectors and velocity. >> >> Le 24/05/2013 08:43, Daniel Kim a écrit : >> > Hey guys. >> > >> > Anyone know simple and easy to follow ICE tutorials for beginners? >> > I am totally beginner for ICE, and also have no back ground education >> > for programming stuff, but I like to learn basic ICE with step by step >> > tutorial. >> > If anyone knows, please share or show me website link. >> > >> > Thanks >> > Daniel >> > >> > -- >> > --- >> > Daniel Kim >> > Animation Director & Professional 3D Generalist >> > http://www.danielkim3d.com >> > --- >> > >> > >> >> > > > -- > --- > Daniel Kim > Animation Director & Professional 3D Generalist > http://www.danielkim3d.com > --- > > >
Re: ICE tutorials for beginner.
Wow, quick response~! Thanks guys :D I will check all of those resources. Thank you guys so much :D Dan On Fri, May 24, 2013 at 6:55 PM, Jack Kao wrote: > Check out Paul Smith on Vimeo, too. > His tutorials on ICE are AMAZING. > > -Original Message- > From: softimage-boun...@listproc.autodesk.com > [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier > jeannel > Sent: Friday, May 24, 2013 3:50 PM > To: softimage@listproc.autodesk.com > Subject: Re: ICE tutorials for beginner. > > Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by > date) tutorials. Gold basics to understand vectors and velocity. > > Le 24/05/2013 08:43, Daniel Kim a écrit : > > Hey guys. > > > > Anyone know simple and easy to follow ICE tutorials for beginners? > > I am totally beginner for ICE, and also have no back ground education > > for programming stuff, but I like to learn basic ICE with step by step > > tutorial. > > If anyone knows, please share or show me website link. > > > > Thanks > > Daniel > > > > -- > > --- > > Daniel Kim > > Animation Director & Professional 3D Generalist > > http://www.danielkim3d.com > > --- > > > > > > -- --- Daniel Kim Animation Director & Professional 3D Generalist http://www.danielkim3d.com ---
RE: ICE tutorials for beginner.
Check out Paul Smith on Vimeo, too. His tutorials on ICE are AMAZING. -Original Message- From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of olivier jeannel Sent: Friday, May 24, 2013 3:50 PM To: softimage@listproc.autodesk.com Subject: Re: ICE tutorials for beginner. Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by date) tutorials. Gold basics to understand vectors and velocity. Le 24/05/2013 08:43, Daniel Kim a écrit : > Hey guys. > > Anyone know simple and easy to follow ICE tutorials for beginners? > I am totally beginner for ICE, and also have no back ground education > for programming stuff, but I like to learn basic ICE with step by step > tutorial. > If anyone knows, please share or show me website link. > > Thanks > Daniel > > -- > --- > Daniel Kim > Animation Director & Professional 3D Generalist > http://www.danielkim3d.com > --- > >
Re: ICE tutorials for beginner.
Look for Bradley Gabe and Helge Mathee on Vimeo, watch their first (by date) tutorials. Gold basics to understand vectors and velocity. Le 24/05/2013 08:43, Daniel Kim a écrit : Hey guys. Anyone know simple and easy to follow ICE tutorials for beginners? I am totally beginner for ICE, and also have no back ground education for programming stuff, but I like to learn basic ICE with step by step tutorial. If anyone knows, please share or show me website link. Thanks Daniel -- --- Daniel Kim Animation Director & Professional 3D Generalist http://www.danielkim3d.com ---
Re: ICE tutorials for beginner.
Hey Daniel. There are bunch of DigitalTutor tutorials that can give you initial push. http://www.digitaltutors.com/tutorial/26-Beginners-Guide-to-ICE-in-Softimage http://www.digitaltutors.com/tutorial/339-Getting-Started-with-ICE-in-Softimage http://www.digitaltutors.com/tutorial/98-Introduction-to-Procedural-ICE-Modeling-in-Softimage cmiVFX also got coulpe good ones as well. That should be enough to get you started. On Fri, May 24, 2013 at 8:43 AM, Daniel Kim wrote: > Hey guys. > > Anyone know simple and easy to follow ICE tutorials for beginners? > I am totally beginner for ICE, and also have no back ground education for > programming stuff, but I like to learn basic ICE with step by step tutorial. > If anyone knows, please share or show me website link. > > Thanks > Daniel > > -- > --- > Daniel Kim > Animation Director & Professional 3D Generalist > http://www.danielkim3d.com > --- > > >