Re: blend of speed using test inside null
No need for states or linear interpolate - just used age percentage through an fcurve node to drive the new speed directly - if only the fcurve editor for these parameters was nicer to use! *-- * *Jonny Grew Ltd * *www.Jonnygrew.com* *http://vimeo.com/jonnygrew/showreel2013*http://vimeo.com/jonnygrew/showreel2013 *07855 212722* Jonny Grew Limited is registered in **England** and Wales. Company number:07735521 VAT number: 122713057 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Jonny Grew Ltd. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. * * On 17 July 2013 17:42, Jonny Grew jonny.g...@gmail.com wrote: Safe. Cheers Cristo. Was looking at linear interpolate but didn't even think about states. Will give it a go. Fancy a lemonade tomorrow lunch? Coach horses, gt Marlborough. Jonny Grew Ltd www.Jonnygrew.com 07855 212722 Jonny Grew Limited is registered in England and Wales. Company number:07735521 VAT number: 122713057 On Jul 17, 2013 5:32 PM, Cristobal Infante cgc...@gmail.com wrote: Hi Jonny, What you probably want to do is use states, so trigger state 1 if particle is inside the null. Then, on state 1 you could use a Linear interpolate using the particle age or age percentage. Safe? C On 17 July 2013 17:13, Jonny Grew jonny.g...@gmail.com wrote: Hello! I'm trying to control a blend of speed when using flow along curve. I'm using the 'set new speed' and then testing inside null to alter the speed of the particles - but is there a way of having the speed animate between the two speeds rather than being a black and white 'if' but rather blend between the two over a specified distance or number of frames? Was looking at using the blend node with weights along the curve but I'm unsure as to how I can get the data out to use in the way that I want to. Any advise much appreciated Yours ignorantly Jonny * *
Re: blend of speed using test inside null
glad you got it working! States are handy to keep your ice tree optimized, and will make it much easier to debug in the future. It will obviously depends how much you are going to build on top, if it's a simple tree then your are done. When emitting a LOT of particles it is sensible to create also state where you send particle to die, sounds harsh I know ;) On 18 July 2013 09:45, Jonny Grew jonny.g...@gmail.com wrote: No need for states or linear interpolate - just used age percentage through an fcurve node to drive the new speed directly - if only the fcurve editor for these parameters was nicer to use! *-- * *Jonny Grew Ltd * *www.Jonnygrew.com* *http://vimeo.com/jonnygrew/showreel2013*http://vimeo.com/jonnygrew/showreel2013 *07855 212722* Jonny Grew Limited is registered in **England** and Wales. Company number:07735521 VAT number: 122713057 This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Jonny Grew Ltd. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. * * On 17 July 2013 17:42, Jonny Grew jonny.g...@gmail.com wrote: Safe. Cheers Cristo. Was looking at linear interpolate but didn't even think about states. Will give it a go. Fancy a lemonade tomorrow lunch? Coach horses, gt Marlborough. Jonny Grew Ltd www.Jonnygrew.com 07855 212722 Jonny Grew Limited is registered in England and Wales. Company number:07735521 VAT number: 122713057 On Jul 17, 2013 5:32 PM, Cristobal Infante cgc...@gmail.com wrote: Hi Jonny, What you probably want to do is use states, so trigger state 1 if particle is inside the null. Then, on state 1 you could use a Linear interpolate using the particle age or age percentage. Safe? C On 17 July 2013 17:13, Jonny Grew jonny.g...@gmail.com wrote: Hello! I'm trying to control a blend of speed when using flow along curve. I'm using the 'set new speed' and then testing inside null to alter the speed of the particles - but is there a way of having the speed animate between the two speeds rather than being a black and white 'if' but rather blend between the two over a specified distance or number of frames? Was looking at using the blend node with weights along the curve but I'm unsure as to how I can get the data out to use in the way that I want to. Any advise much appreciated Yours ignorantly Jonny * *
blend of speed using test inside null
Hello! I'm trying to control a blend of speed when using flow along curve. I'm using the 'set new speed' and then testing inside null to alter the speed of the particles - but is there a way of having the speed animate between the two speeds rather than being a black and white 'if' but rather blend between the two over a specified distance or number of frames? Was looking at using the blend node with weights along the curve but I'm unsure as to how I can get the data out to use in the way that I want to. Any advise much appreciated Yours ignorantly Jonny * *
Re: blend of speed using test inside null
Hi Jonny, What you probably want to do is use states, so trigger state 1 if particle is inside the null. Then, on state 1 you could use a Linear interpolate using the particle age or age percentage. Safe? C On 17 July 2013 17:13, Jonny Grew jonny.g...@gmail.com wrote: Hello! I'm trying to control a blend of speed when using flow along curve. I'm using the 'set new speed' and then testing inside null to alter the speed of the particles - but is there a way of having the speed animate between the two speeds rather than being a black and white 'if' but rather blend between the two over a specified distance or number of frames? Was looking at using the blend node with weights along the curve but I'm unsure as to how I can get the data out to use in the way that I want to. Any advise much appreciated Yours ignorantly Jonny * *