Re: [sumo-user] Using flows after loading a simulation state
Thanks for the fix, I checked it now and it works fine for me. Von: Jakob Erdmann Gesendet: Donnerstag, 31. Januar 2019 09:30 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Unfortunately, our nightly-builds are not up-to-date so you either have to build from source or wait until our server issues are resolved. Am Do., 31. Jan. 2019 um 08:23 Uhr schrieb Jakob Kaths : Hi Jakob, thanks for fixing this exciting new one again super fast. I’ll test with the next nightly snapshot. All the best Jakob Von: Jakob Erdmann Gesendet: Mittwoch, 30. Januar 2019 23:43 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello Jakob, thanks for providing the example scenario. The issue has been fixed: https://github.com/eclipse/sumo/issues/5131 (It was not a regression to an earlier bug but rather an exciting new bug). best regards, Jakob Am Di., 29. Jan. 2019 um 12:31 Uhr schrieb Jakob Kaths : Hi Jakob, could it be, that this bug was reintroduced with 1.1.0? I’m trying to save a state file, reloading it and keep simulating, all with the same route files. However, continuing the simulation fails with the same error as back in April last year. In the saved state, the route with state=1 is only containing start and end edge. If I add all edges in between manually in the state file, the simulation runs as intended with the saved state. Again I’m using flows with incomplete route definitions (from="-200.0.00" to="-2013000.186.34") instead of providing all edges. All the best Jakob Dr. Jakob Kaths Product Manager ☏ +49 89 74 7377-63 ___ TESIS GmbH ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ www.tesis.de Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 ___ ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Unfortunately, our nightly-builds are not up-to-date so you either have to build from source or wait until our server issues are resolved. Am Do., 31. Jan. 2019 um 08:23 Uhr schrieb Jakob Kaths : > Hi Jakob, > > > > thanks for fixing this exciting new one again super fast. 😊 I’ll test > with the next nightly snapshot. > > > > All the best > > > > Jakob > > > > *Von:* Jakob Erdmann > *Gesendet:* Mittwoch, 30. Januar 2019 23:43 > *An:* Jakob Kaths ; Sumo project User discussions < > sumo-user@eclipse.org> > *Betreff:* Re: [sumo-user] Using flows after loading a simulation state > > > > Hello Jakob, > > thanks for providing the example scenario. The issue has been fixed: > https://github.com/eclipse/sumo/issues/5131 > > (It was not a regression to an earlier bug but rather an exciting new bug). > > > > best regards, > > Jakob > > > > Am Di., 29. Jan. 2019 um 12:31 Uhr schrieb Jakob Kaths < > jakob.ka...@tesis.de>: > > Hi Jakob, > > > > could it be, that this bug was reintroduced with 1.1.0? I’m trying to save > a state file, reloading it and keep simulating, all with the same route > files. However, continuing the simulation fails with the same error as back > in April last year. In the saved state, the route with state=1 is only > containing start and end edge. If I add all edges in between manually in > the state file, the simulation runs as intended with the saved state. Again > I’m using flows with incomplete route definitions (from="-200.0.00" > to="-2013000.186.34") instead of providing all edges. > > > > All the best > > > > Jakob > > > > > > *Dr. Jakob Kaths* > > Product Manager > > ☏ +49 89 74 7377-63 > > ___ > > *TESIS GmbH* ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ > www.tesis.de > > Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski > > Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 > > ___ > > > > > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hi Jakob, thanks for fixing this exciting new one again super fast. I’ll test with the next nightly snapshot. All the best Jakob Von: Jakob Erdmann Gesendet: Mittwoch, 30. Januar 2019 23:43 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello Jakob, thanks for providing the example scenario. The issue has been fixed: https://github.com/eclipse/sumo/issues/5131 (It was not a regression to an earlier bug but rather an exciting new bug). best regards, Jakob Am Di., 29. Jan. 2019 um 12:31 Uhr schrieb Jakob Kaths : Hi Jakob, could it be, that this bug was reintroduced with 1.1.0? I’m trying to save a state file, reloading it and keep simulating, all with the same route files. However, continuing the simulation fails with the same error as back in April last year. In the saved state, the route with state=1 is only containing start and end edge. If I add all edges in between manually in the state file, the simulation runs as intended with the saved state. Again I’m using flows with incomplete route definitions (from="-200.0.00" to="-2013000.186.34") instead of providing all edges. All the best Jakob Dr. Jakob Kaths Product Manager ☏ +49 89 74 7377-63 ___ TESIS GmbH ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ www.tesis.de Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 ___ ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hello Jakob, thanks for providing the example scenario. The issue has been fixed: https://github.com/eclipse/sumo/issues/5131 (It was not a regression to an earlier bug but rather an exciting new bug). best regards, Jakob Am Di., 29. Jan. 2019 um 12:31 Uhr schrieb Jakob Kaths : > Hi Jakob, > > > > could it be, that this bug was reintroduced with 1.1.0? I’m trying to save > a state file, reloading it and keep simulating, all with the same route > files. However, continuing the simulation fails with the same error as back > in April last year. In the saved state, the route with state=1 is only > containing start and end edge. If I add all edges in between manually in > the state file, the simulation runs as intended with the saved state. Again > I’m using flows with incomplete route definitions (from="-200.0.00" > to="-2013000.186.34") instead of providing all edges. > > > > All the best > > > > Jakob > > > > > > *Dr. Jakob Kaths* > > Product Manager > > ☏ +49 89 74 7377-63 > > ___ > > *TESIS GmbH* ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ > www.tesis.de > > Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski > > Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 > > ___ > > > > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hello, In my test I do not see a change in the way flows are saved between version 1.0.0 and 1.1.0. The saved state (route with from,to) for flows with incomplete route is working as intended and does not cause an error on my end. 1) What is the exact error message you are getting? 2) Can you provide sample files for reproducing the issue? (you may send them directly to me) best regards, Jakob Am Di., 29. Jan. 2019 um 12:31 Uhr schrieb Jakob Kaths : > Hi Jakob, > > > > could it be, that this bug was reintroduced with 1.1.0? I’m trying to save > a state file, reloading it and keep simulating, all with the same route > files. However, continuing the simulation fails with the same error as back > in April last year. In the saved state, the route with state=1 is only > containing start and end edge. If I add all edges in between manually in > the state file, the simulation runs as intended with the saved state. Again > I’m using flows with incomplete route definitions (from="-200.0.00" > to="-2013000.186.34") instead of providing all edges. > > > > All the best > > > > Jakob > > > > > > *Dr. Jakob Kaths* > > Product Manager > > ☏ +49 89 74 7377-63 > > ___ > > *TESIS GmbH* ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ > www.tesis.de > > Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski > > Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 > > ___ > > > > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://www.eclipse.org/mailman/listinfo/sumo-user > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hi Jakob, could it be, that this bug was reintroduced with 1.1.0? I’m trying to save a state file, reloading it and keep simulating, all with the same route files. However, continuing the simulation fails with the same error as back in April last year. In the saved state, the route with state=1 is only containing start and end edge. If I add all edges in between manually in the state file, the simulation runs as intended with the saved state. Again I’m using flows with incomplete route definitions (from="-200.0.00" to="-2013000.186.34") instead of providing all edges. All the best Jakob Dr. Jakob Kaths Product Manager ☏ +49 89 74 7377-63 ___ TESIS GmbH ▪ Baierbrunner Str. 23 ▪ 81379 Munich ▪ Germany ▪ www.tesis.de Management board: Dr. Cornelius Chucholowski, Maximilian Chucholowski Country Court Munich, HRB 115649 ▪ Vat-Id DE-185 446 804 __ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Your value of SUMO_HOME probably still points to an older version of SUMO. This causes xml-validation of the new xml element 'flowState' to fail. Either update the variable or disable xml-validation: http://sumo.dlr.de/wiki/XMLValidation 2018-04-12 10:08 GMT+02:00 Jakob Kaths : > Hi, > > > > thanks for the information. I now tried with the newest build, but I still > get an error message when loading the state. „Error: no declaration found > for element 'flowState'“ > > > > Do I have to define something additionally somewhere? > > > > All the best > > > > Jakob > > > > *Von:* Jakob Erdmann > *Gesendet:* Mittwoch, 11. April 2018 12:12 > *An:* Jakob Kaths > *Cc:* Sumo project User discussions > > *Betreff:* Re: [sumo-user] Using flows after loading a simulation state > > > > Hello, > Yesterday we had a broken windows build due to a bad commit and today the > build did not take place due to the repository migration. > > It should be back to normal by tomorrow. > > regards, > > Jakob > > > > 2018-04-11 10:26 GMT+02:00 Jakob Kaths : > > Sorry that I have to come back to this. I wanted to try the fix, but the > current nightly snapshots (today and yesterday) seem to be lacking the SUMO > and SUMO-GUI executables, while netedit.exe is still available in the bin > Folder. > > > > *Von:* Jakob Erdmann > *Gesendet:* Montag, 9. April 2018 12:43 > *An:* Jakob Kaths ; Sumo project User discussions < > sumo-user@eclipse.org> > *Betreff:* Re: [sumo-user] Using flows after loading a simulation state > > > > Hello Jakob, > > the aforementioned bug is fixed in the latest development version. When > loading simulation state that contains flows, make sure to load the > original route files that were used when saving the state. You do not need > to manage begin and end time as this is handled by sumo. Just define your > flow as > > begin='0' end='3600' vehsPerHour='1800' type='CarDistribution' > departLane='random' departPos='base' departSpeed='max'/> > > regards, > Jakob > > > > > > 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : > > Hello Jakob, > > yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). > > It should not be necessary to load flows again after saving. > > Thank you for bringing this to my attention. > > regards, > > Jakob > > > > 2018-04-06 13:20 GMT+02:00 Jakob Kaths : > > Hello everybody, > > I’m already bothering you with my next question. I tried creating a saved > simulation state and reloading it afterwards, which works in principle, but > it seems I can’t use flows afterwards anymore, but would have to define > every vehicle explicitly. Is that correct? > > A part of my demand definition looks as follows: > > This would be before saving the state: > > begin='0' end='100' vehsPerHour='1800' type='CarDistribution' > departLane='random' departPos='base' departSpeed='max'/> > > And this after: > > to="-2013000.186.34" begin='110' end='3600' vehsPerHour='1800' > type='CarDistribution' departLane='random' departPos='base' > departSpeed='max'/> > > So basically, I got the same flows again with a different name and create > more vehicles after the state is loaded. However, I receive an error > message that the first vehicle with the ID South_to_North_Car_continuous.0 > has no valid route. > > Is this a bug or is it simply not possible to create flows after the > simulation has already begun? > > Thanks > > Jakob > > > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://dev.eclipse.org/mailman/listinfo/sumo-user > > > > > > > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hi, thanks for the information. I now tried with the newest build, but I still get an error message when loading the state. „Error: no declaration found for element 'flowState'“ Do I have to define something additionally somewhere? All the best Jakob Von: Jakob Erdmann Gesendet: Mittwoch, 11. April 2018 12:12 An: Jakob Kaths Cc: Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello, Yesterday we had a broken windows build due to a bad commit and today the build did not take place due to the repository migration. It should be back to normal by tomorrow. regards, Jakob 2018-04-11 10:26 GMT+02:00 Jakob Kaths : Sorry that I have to come back to this. I wanted to try the fix, but the current nightly snapshots (today and yesterday) seem to be lacking the SUMO and SUMO-GUI executables, while netedit.exe is still available in the bin Folder. Von: Jakob Erdmann Gesendet: Montag, 9. April 2018 12:43 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello Jakob, the aforementioned bug is fixed in the latest development version. When loading simulation state that contains flows, make sure to load the original route files that were used when saving the state. You do not need to manage begin and end time as this is handled by sumo. Just define your flow as regards, Jakob 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : Hello Jakob, yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). It should not be necessary to load flows again after saving. Thank you for bringing this to my attention. regards, Jakob 2018-04-06 13:20 GMT+02:00 Jakob Kaths : Hello everybody, I’m already bothering you with my next question. I tried creating a saved simulation state and reloading it afterwards, which works in principle, but it seems I can’t use flows afterwards anymore, but would have to define every vehicle explicitly. Is that correct? A part of my demand definition looks as follows: This would be before saving the state: And this after: So basically, I got the same flows again with a different name and create more vehicles after the state is loaded. However, I receive an error message that the first vehicle with the ID South_to_North_Car_continuous.0 has no valid route. Is this a bug or is it simply not possible to create flows after the simulation has already begun? Thanks Jakob ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hello, Yesterday we had a broken windows build due to a bad commit and today the build did not take place due to the repository migration. It should be back to normal by tomorrow. regards, Jakob 2018-04-11 10:26 GMT+02:00 Jakob Kaths : > Sorry that I have to come back to this. I wanted to try the fix, but the > current nightly snapshots (today and yesterday) seem to be lacking the SUMO > and SUMO-GUI executables, while netedit.exe is still available in the bin > Folder. > > > > *Von:* Jakob Erdmann > *Gesendet:* Montag, 9. April 2018 12:43 > *An:* Jakob Kaths ; Sumo project User discussions < > sumo-user@eclipse.org> > *Betreff:* Re: [sumo-user] Using flows after loading a simulation state > > > > Hello Jakob, > > the aforementioned bug is fixed in the latest development version. When > loading simulation state that contains flows, make sure to load the > original route files that were used when saving the state. You do not need > to manage begin and end time as this is handled by sumo. Just define your > flow as > > begin='0' end='3600' vehsPerHour='1800' type='CarDistribution' > departLane='random' departPos='base' departSpeed='max'/> > > regards, > Jakob > > > > > > 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : > > Hello Jakob, > > yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). > > It should not be necessary to load flows again after saving. > > Thank you for bringing this to my attention. > > regards, > > Jakob > > > > 2018-04-06 13:20 GMT+02:00 Jakob Kaths : > > Hello everybody, > > I’m already bothering you with my next question. I tried creating a saved > simulation state and reloading it afterwards, which works in principle, but > it seems I can’t use flows afterwards anymore, but would have to define > every vehicle explicitly. Is that correct? > > A part of my demand definition looks as follows: > > This would be before saving the state: > > begin='0' end='100' vehsPerHour='1800' type='CarDistribution' > departLane='random' departPos='base' departSpeed='max'/> > > And this after: > > to="-2013000.186.34" begin='110' end='3600' vehsPerHour='1800' > type='CarDistribution' departLane='random' departPos='base' > departSpeed='max'/> > > So basically, I got the same flows again with a different name and create > more vehicles after the state is loaded. However, I receive an error > message that the first vehicle with the ID South_to_North_Car_continuous.0 > has no valid route. > > Is this a bug or is it simply not possible to create flows after the > simulation has already begun? > > Thanks > > Jakob > > > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://dev.eclipse.org/mailman/listinfo/sumo-user > > > > > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Sorry that I have to come back to this. I wanted to try the fix, but the current nightly snapshots (today and yesterday) seem to be lacking the SUMO and SUMO-GUI executables, while netedit.exe is still available in the bin Folder. Von: Jakob Erdmann Gesendet: Montag, 9. April 2018 12:43 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello Jakob, the aforementioned bug is fixed in the latest development version. When loading simulation state that contains flows, make sure to load the original route files that were used when saving the state. You do not need to manage begin and end time as this is handled by sumo. Just define your flow as regards, Jakob 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : Hello Jakob, yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). It should not be necessary to load flows again after saving. Thank you for bringing this to my attention. regards, Jakob 2018-04-06 13:20 GMT+02:00 Jakob Kaths : Hello everybody, I’m already bothering you with my next question. I tried creating a saved simulation state and reloading it afterwards, which works in principle, but it seems I can’t use flows afterwards anymore, but would have to define every vehicle explicitly. Is that correct? A part of my demand definition looks as follows: This would be before saving the state: And this after: So basically, I got the same flows again with a different name and create more vehicles after the state is loaded. However, I receive an error message that the first vehicle with the ID South_to_North_Car_continuous.0 has no valid route. Is this a bug or is it simply not possible to create flows after the simulation has already begun? Thanks Jakob ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Great, thank you so much for fixing it. I will try it out soon! Von: Jakob Erdmann Gesendet: Montag, 9. April 2018 12:43 An: Jakob Kaths ; Sumo project User discussions Betreff: Re: [sumo-user] Using flows after loading a simulation state Hello Jakob, the aforementioned bug is fixed in the latest development version. When loading simulation state that contains flows, make sure to load the original route files that were used when saving the state. You do not need to manage begin and end time as this is handled by sumo. Just define your flow as regards, Jakob 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : Hello Jakob, yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). It should not be necessary to load flows again after saving. Thank you for bringing this to my attention. regards, Jakob 2018-04-06 13:20 GMT+02:00 Jakob Kaths : Hello everybody, I’m already bothering you with my next question. I tried creating a saved simulation state and reloading it afterwards, which works in principle, but it seems I can’t use flows afterwards anymore, but would have to define every vehicle explicitly. Is that correct? A part of my demand definition looks as follows: This would be before saving the state: And this after: So basically, I got the same flows again with a different name and create more vehicles after the state is loaded. However, I receive an error message that the first vehicle with the ID South_to_North_Car_continuous.0 has no valid route. Is this a bug or is it simply not possible to create flows after the simulation has already begun? Thanks Jakob ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hello Jakob, the aforementioned bug is fixed in the latest development version. When loading simulation state that contains flows, make sure to load the original route files that were used when saving the state. You do not need to manage begin and end time as this is handled by sumo. Just define your flow as regards, Jakob 2018-04-08 21:53 GMT+02:00 Jakob Erdmann : > Hello Jakob, > yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). > It should not be necessary to load flows again after saving. > Thank you for bringing this to my attention. > regards, > Jakob > > 2018-04-06 13:20 GMT+02:00 Jakob Kaths : > >> Hello everybody, >> >> I’m already bothering you with my next question. I tried creating a saved >> simulation state and reloading it afterwards, which works in principle, but >> it seems I can’t use flows afterwards anymore, but would have to define >> every vehicle explicitly. Is that correct? >> >> A part of my demand definition looks as follows: >> >> This would be before saving the state: >> >> > begin='0' end='100' vehsPerHour='1800' type='CarDistribution' >> departLane='random' departPos='base' departSpeed='max'/> >> >> And this after: >> >> > to="-2013000.186.34" begin='110' end='3600' vehsPerHour='1800' >> type='CarDistribution' departLane='random' departPos='base' >> departSpeed='max'/> >> >> So basically, I got the same flows again with a different name and create >> more vehicles after the state is loaded. However, I receive an error >> message that the first vehicle with the ID South_to_North_Car_continuous.0 >> has no valid route. >> >> Is this a bug or is it simply not possible to create flows after the >> simulation has already begun? >> >> Thanks >> >> Jakob >> >> ___ >> sumo-user mailing list >> sumo-user@eclipse.org >> To change your delivery options, retrieve your password, or unsubscribe >> from this list, visit >> https://dev.eclipse.org/mailman/listinfo/sumo-user >> >> > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user
Re: [sumo-user] Using flows after loading a simulation state
Hello Jakob, yes, this is a bug (https://github.com/DLR-TS/sumo/issues/3971). It should not be necessary to load flows again after saving. Thank you for bringing this to my attention. regards, Jakob 2018-04-06 13:20 GMT+02:00 Jakob Kaths : > Hello everybody, > > I’m already bothering you with my next question. I tried creating a saved > simulation state and reloading it afterwards, which works in principle, but > it seems I can’t use flows afterwards anymore, but would have to define > every vehicle explicitly. Is that correct? > > A part of my demand definition looks as follows: > > This would be before saving the state: > > begin='0' end='100' vehsPerHour='1800' type='CarDistribution' > departLane='random' departPos='base' departSpeed='max'/> > > And this after: > > to="-2013000.186.34" begin='110' end='3600' vehsPerHour='1800' > type='CarDistribution' departLane='random' departPos='base' > departSpeed='max'/> > > So basically, I got the same flows again with a different name and create > more vehicles after the state is loaded. However, I receive an error > message that the first vehicle with the ID South_to_North_Car_continuous.0 > has no valid route. > > Is this a bug or is it simply not possible to create flows after the > simulation has already begun? > > Thanks > > Jakob > > ___ > sumo-user mailing list > sumo-user@eclipse.org > To change your delivery options, retrieve your password, or unsubscribe > from this list, visit > https://dev.eclipse.org/mailman/listinfo/sumo-user > > ___ sumo-user mailing list sumo-user@eclipse.org To change your delivery options, retrieve your password, or unsubscribe from this list, visit https://dev.eclipse.org/mailman/listinfo/sumo-user