Re: [pfSense Support] Problem with pftpx - device busy
On Tue, Apr 21, 2009 at 7:43 AM, Peter Allgeyer wrote: > Hi, > > I just encountered a problem with pftpx. We have a FTP-Server in the > DMZ-Zone. Entering ftp://ftp.server.ip from inside in the browser (for > example, command line ftp is the same) shows no listing. Reloading the > website several times and when suddenly the listing appears. Testing the > same from outside works just fine. > > I've found the following lines in /var/log/system.log > (there are many of them): > Apr 21 13:34:36 pf01 pftpx[5446]: #23 pf operation failed: Device busy > Apr 21 13:34:36 pf01 pftpx[5446]: #23 pf operation failed: Device busy > > And sometimes even: > Apr 21 13:41:51 pf01 ftpsesame[4680]: #60 filter_allow failed: Device > busy > Apr 21 13:41:51 pf01 ftpsesame[4680]: #60 filter_allow failed: Device > busy > Apr 21 13:41:51 pf01 ftpsesame[4680]: #60 filter_allow failed: Device > busy > Apr 21 13:41:51 pf01 ftpsesame[4680]: #60 filter_allow failed: Device > busy > > > Manually stopping/starting of pftpx doesn't help. > One of our developers is seeing this too now, though I haven't and this list post is the only Google hit on that error message (don't you hate seeing that...). Not sure of the issue yet, we're looking at it. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] syslog-ng config to record events from fws
luismi schrieb:
> Hi all,
>
> Can anyone forward me a template to configure syslog-ng for pfsense
> logs?
>
> Thanks
>
>
> -
> To unsubscribe, e-mail: support-unsubscr...@pfsense.com
> For additional commands, e-mail: support-h...@pfsense.com
>
> Commercial support available - https://portal.pfsense.org
>
source src_pfsense { udp(ip(0.0.0.0) port(514)); };
destination pfsense { file("/var/log/pfsense");};
log { source(src_pfsense); destination(pfsense); };
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available - https://portal.pfsense.org
[pfSense Support] syslog-ng config to record events from fws
Hi all, Can anyone forward me a template to configure syslog-ng for pfsense logs? Thanks - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] network interface mismatch
On Mon, May 11, 2009 at 10:23 AM, Pete Boyd wrote: > > I had that issue with a Dell Optiplex GX110 (Pentium II & III) and > > 3C905B-TX > > and 3C905C-TX doesn't work together, only 2 3C905C-TX NICs(one integrated > > and one PCI, or two PCI) will work fine in Pfsense 1.x.x > > > > Right now I'm using one Intel 10/100, one Intel gigabit and one > > 3C905C-TX(integrated) on that Dell Optiplex. > > Many thanks for that Victor, I've now tried it with 2 3C905C and it works > fine so I'll stick with the combinations you've described. > > > -- > Pete Boyd > > Open Plan IT - http://openplanit.co.uk > The Golden Ear - http://thegoldenear.org > > > > - > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > The reason why they don't work together as I read more than a year ago(FreeBSD forums) is that FreeBSD assigns the same IRQ to both NICS limiting to act if it was only one, and it could be the 3C905B or the 3C905C depending which came online on the first place, within the boot process, it was odd and I couldn't belive it, but it was so true. Back then I had 5 NICs(3 3C905B-TX, 2 3C905C-TX) which only two(3C905C) could be seen on the assign screen. I tested them with a standalone FreeBSD 6.2 install obtaining the same result. -- "It is human nature to think wisely and act in an absurd fashion." "Todo el desorden del mundo proviene de las profesiones mal o mediocremente servidas"
Re: [pfSense Support] network interface mismatch
> I had that issue with a Dell Optiplex GX110 (Pentium II & III) and > 3C905B-TX > and 3C905C-TX doesn't work together, only 2 3C905C-TX NICs(one integrated > and one PCI, or two PCI) will work fine in Pfsense 1.x.x > > Right now I'm using one Intel 10/100, one Intel gigabit and one > 3C905C-TX(integrated) on that Dell Optiplex. Many thanks for that Victor, I've now tried it with 2 3C905C and it works fine so I'll stick with the combinations you've described. -- Pete Boyd Open Plan IT - http://openplanit.co.uk The Golden Ear - http://thegoldenear.org - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] network interface mismatch
On Wed, Apr 29, 2009 at 8:05 AM, Pete Boyd wrote: > When installing pfSense 1.2.2 from the Live CD, if I use 2 network cards > of a similar type, for example 3Com 3C905B-TX or 3C905C-TX, I get "Network > interface mismatch -- Running interface assignment option" and right after > it only shows one 'xl0' interface. > > I've had this issue every time I install pfSense using various 1.2 series > versions. I think I used to have it with IPCop too. I've tried the cards > in various PCI slots. I normally work around it by using two differing > 3Com 3C905 variants, or perhaps a 3C900 and a 3C905 I can't recall. Today > I'm seeing it whilst using one 3C905B-TX and one 3C905C-TX (I can't > remember if I've gotten this particular card combination to work > previously). > > The machine is a HP Vectra VL800, part number P3629AV, has a Pentium 4 CPU. > There's no BIOS update available from HP. > > I've tried installing with and without PCI bus master in BIOS setup for > all PCI slots. > > What's going on here? Is there anything I can do to work around it whilst > still using these cards as these types are all I have left in stock? Is > there any more info you need in order to help me? > > Thanks > > > -- > Pete Boyd > > Open Plan IT - http://openplanit.co.uk > The Golden Ear - http://thegoldenear.org > > > > - > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > I had that issue with a Dell Optiplex GX110 (Pentium II & III) and 3C905B-TX and 3C905C-TX doesn't work together, only 2 3C905C-TX NICs(one integrated and one PCI, or two PCI) will work fine in Pfsense 1.x.x Right now I'm using one Intel 10/100, one Intel gigabit and one 3C905C-TX(integrated) on that Dell Optiplex. Hope it helps. -- "It is human nature to think wisely and act in an absurd fashion." "Todo el desorden del mundo proviene de las profesiones mal o mediocremente servidas"
Re: [pfSense Support] network interface mismatch
> On Mon, May 11, 2009 at 10:19 AM, Pete Boyd > wrote: >> Is there anything that can be done instead of replacing one of the 3Com >> cards? >> > > Sounds like a driver issue of some sort, trying 1.2.3 which has a > newer FreeBSD base may make it work. Thanks Chris. I've now tried 1.2.3 RC1 and it has the same issue as with 1.2.2. -- Pete Boyd Open Plan IT - http://openplanit.co.uk The Golden Ear - http://thegoldenear.org - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] network interface mismatch
On Mon, May 11, 2009 at 10:19 AM, Pete Boyd wrote: > Is there anything that can be done instead of replacing one of the 3Com > cards? > Sounds like a driver issue of some sort, trying 1.2.3 which has a newer FreeBSD base may make it work. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
RE: [pfSense Support] network interface mismatch
Is there anything that can be done instead of replacing one of the 3Com cards? > I ran into the same thing but never resolved it. I just went out and > bought two DLink $10 cards. I gave up on the 3Coms. > > -Original Message- > From: Pete Boyd [mailto:petes-li...@thegoldenear.org] > Sent: Wednesday, April 29, 2009 9:06 AM > To: support@pfsense.com > Subject: [pfSense Support] network interface mismatch > > When installing pfSense 1.2.2 from the Live CD, if I use 2 network cards > of a similar type, for example 3Com 3C905B-TX or 3C905C-TX, I get "Network > interface mismatch -- Running interface assignment option" and right after > it only shows one 'xl0' interface. > > I've had this issue every time I install pfSense using various 1.2 series > versions. I think I used to have it with IPCop too. I've tried the cards > in various PCI slots. I normally work around it by using two differing > 3Com 3C905 variants, or perhaps a 3C900 and a 3C905 I can't recall. Today > I'm seeing it whilst using one 3C905B-TX and one 3C905C-TX (I can't > remember if I've gotten this particular card combination to work > previously). > > The machine is a HP Vectra VL800, part number P3629AV, has a Pentium 4 > CPU. > There's no BIOS update available from HP. > > I've tried installing with and without PCI bus master in BIOS setup for > all PCI slots. > > What's going on here? Is there anything I can do to work around it whilst > still using these cards as these types are all I have left in stock? Is > there any more info you need in order to help me? > > Thanks > > > -- > Pete Boyd > > Open Plan IT - http://openplanit.co.uk > The Golden Ear - http://thegoldenear.org > > > > - > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > > - > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > > -- Pete Boyd Open Plan IT - http://openplanit.co.uk The Golden Ear - http://thegoldenear.org - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
