On Wed, Apr 29, 2009 at 8:05 AM, Pete Boyd <petes-li...@thegoldenear.org>wrote:

> When installing pfSense 1.2.2 from the Live CD, if I use 2 network cards
> of a similar type, for example 3Com 3C905B-TX or 3C905C-TX, I get "Network
>
interface mismatch -- Running interface assignment option" and right after
> it only shows one 'xl0' interface.
>
> I've had this issue every time I install pfSense using various 1.2 series
> versions. I think I used to have it with IPCop too. I've tried the cards
> in various PCI slots. I normally work around it by using two differing
> 3Com 3C905 variants, or perhaps a 3C900 and a 3C905 I can't recall. Today
> I'm seeing it whilst using one 3C905B-TX and one 3C905C-TX (I can't
> remember if I've gotten this particular card combination to work
> previously).
>
> The machine is a HP Vectra VL800, part number P3629AV, has a Pentium 4 CPU.
> There's no BIOS update available from HP.
>
> I've tried installing with and without PCI bus master in BIOS setup for
> all PCI slots.
>
> What's going on here? Is there anything I can do to work around it whilst
> still using these cards as these types are all I have left in stock? Is
> there any more info you need in order to help me?
>
> Thanks
>
>
> --
> Pete Boyd
>
> Open Plan IT - http://openplanit.co.uk
> The Golden Ear - http://thegoldenear.org
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: support-unsubscr...@pfsense.com
> For additional commands, e-mail: support-h...@pfsense.com
>
> Commercial support available - https://portal.pfsense.org
>
>

I had that issue with a Dell Optiplex GX110 (Pentium II & III) and 3C905B-TX
and 3C905C-TX doesn't work together, only 2 3C905C-TX NICs(one integrated
and one PCI, or two PCI) will work fine in Pfsense 1.x.x

Right now I'm using one Intel 10/100, one Intel gigabit and one
3C905C-TX(integrated) on that Dell Optiplex.

Hope it helps.

-- 
"It is human nature to think wisely and act in an absurd fashion."

"Todo el desorden del mundo proviene de las profesiones mal o mediocremente
servidas"

Reply via email to