Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
good decision on this note :) http://cvstrac.pfsense.com/chngview?cn=14347 I did a fresh reinstall/restore from a 9-18 iso and my traffic shaper is still busted. it's bummer that it did work in an earlier release though :( oh well, something to look forward to in 1.2 right? On 9/14/06, Rob Terhaar [EMAIL PROTECTED] wrote: I read thru your forum post and i'm not sure what i can do to fix my situation. in the latest pfsense revisions, the acks are already set up to 25% bandwidth- and really what's troubling is that i've had the same configuration running perfectly for 3+ months. Just recently, these problems came up. But rebooting always makes the traffic shaper come back to life! Perhaps i'll try to do a reinstall, i've been doing upgrades to the system for a while, and there might be some cruft... On 9/14/06, Scott Ullrich [EMAIL PROTECTED] wrote: On 9/14/06, Rob Terhaar [EMAIL PROTECTED] wrote: So the reason why i started to dig into the status screen is because we've started to have issues with the traffic shaper- After about a day, it seems like the traffic shaper falls asleep, which manifests it's self in drop outs on our VOIP phones. A reboot fixes the problem. Here's some more information about my setup. (i apologize in advance if this is too much information :) ) We have two physical offices, and a 10baseT link between them. the main office is LAN on the pfsense, the 2nd office is opt1. I also have voip phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 on the LAN in the main office. __ __ .1.0/24 .2.0/24 main office routed 2nd office __ __ vlan4 bridged vlan 4 .4.0/24 [.4.0/24] The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are vlan interfaces that belong to LAN and OPT1, respectively. I'm using the pfsense traffic shaper on the bridged vlan connection. I set it up using the wizard, and only setup the provision for asterisk/voip. Visit the tips and tricks forum thread which discusses some issues to look for. Last I heard the shaper does not work with bridged interfaces. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
So the reason why i started to dig into the status screen is because we've started to have issues with the traffic shaper-After about a day, it seems like the traffic shaper falls asleep, which manifests it's self in drop outs on our VOIP phones. A reboot fixes the problem. Here's some more information about my setup. (i apologize in advance if this is too much information :) )We have two physical offices, and a 10baseT link between them. the main office is LAN on the pfsense, the 2nd office is opt1. I also have voip phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 on the LAN in the main office. __ __.1.0/24 .2.0/24main office routed 2nd office__ __vlan4 bridged vlan 4.4.0/24 [.4.0/24] The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are vlan interfaces that belong to LAN and OPT1, respectively. I'm using the pfsense traffic shaper on the bridged vlan connection. I set it up using the wizard, and only setup the provision for asterisk/voip.On 9/12/06, Scott Ullrich [EMAIL PROTECTED] wrote: On 9/12/06, Rob Terhaar [EMAIL PROTECTED] wrote: I'm not sure if it was due to a reboot, mis-alignment of the planets, or the snapshot, but my queue status page is busted for me in the latest 1.0 snapshots. I'm currently running the 9-10 snapshot, and when i browse to the queue status page, all of the queue indicators get stuck on loading. Yes, i've hit the reload link at the bottom of the page. Any advice on how to troubleshoot this?killall -9 pfctl from a shell and rerun it.-To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
just to better reiterate, a reboot of the pfsense makes the traffic shaper come back to life... On 9/14/06, Rob Terhaar [EMAIL PROTECTED] wrote: So the reason why i started to dig into the status screen is because we've started to have issues with the traffic shaper- After about a day, it seems like the traffic shaper falls asleep, which manifests it's self in drop outs on our VOIP phones. A reboot fixes the problem. Here's some more information about my setup. (i apologize in advance if this is too much information :) ) We have two physical offices, and a 10baseT link between them. the main office is LAN on the pfsense, the 2nd office is opt1. I also have voip phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 on the LAN in the main office. __ __ .1.0/24 .2.0/24 main office routed 2nd office __ __ vlan4 bridged vlan 4 .4.0/24 [.4.0/24] The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are vlan interfaces that belong to LAN and OPT1, respectively. I'm using the pfsense traffic shaper on the bridged vlan connection. I set it up using the wizard, and only setup the provision for asterisk/voip. On 9/12/06, Scott Ullrich [EMAIL PROTECTED] wrote: On 9/12/06, Rob Terhaar [EMAIL PROTECTED] wrote: I'm not sure if it was due to a reboot, mis-alignment of the planets, or the snapshot, but my queue status page is busted for me in the latest 1.0 snapshots. I'm currently running the 9-10 snapshot, and when i browse to the queue status page, all of the queue indicators get stuck on loading. Yes, i've hit the reload link at the bottom of the page. Any advice on how to troubleshoot this? killall -9 pfctl from a shell and rerun it. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
On 9/14/06, Rob Terhaar [EMAIL PROTECTED] wrote: So the reason why i started to dig into the status screen is because we've started to have issues with the traffic shaper- After about a day, it seems like the traffic shaper falls asleep, which manifests it's self in drop outs on our VOIP phones. A reboot fixes the problem. Here's some more information about my setup. (i apologize in advance if this is too much information :) ) We have two physical offices, and a 10baseT link between them. the main office is LAN on the pfsense, the 2nd office is opt1. I also have voip phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 on the LAN in the main office. __ __ .1.0/24 .2.0/24 main office routed 2nd office __ __ vlan4 bridged vlan 4 .4.0/24 [.4.0/24] The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are vlan interfaces that belong to LAN and OPT1, respectively. I'm using the pfsense traffic shaper on the bridged vlan connection. I set it up using the wizard, and only setup the provision for asterisk/voip. Visit the tips and tricks forum thread which discusses some issues to look for. Last I heard the shaper does not work with bridged interfaces. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
I read thru your forum post and i'm not sure what i can do to fix my situation. in the latest pfsense revisions, the acks are already set up to 25% bandwidth- and really what's troubling is that i've had the same configuration running perfectly for 3+ months. Just recently, these problems came up. But rebooting always makes the traffic shaper come back to life! Perhaps i'll try to do a reinstall, i've been doing upgrades to the system for a while, and there might be some cruft... On 9/14/06, Scott Ullrich [EMAIL PROTECTED] wrote: On 9/14/06, Rob Terhaar [EMAIL PROTECTED] wrote: So the reason why i started to dig into the status screen is because we've started to have issues with the traffic shaper- After about a day, it seems like the traffic shaper falls asleep, which manifests it's self in drop outs on our VOIP phones. A reboot fixes the problem. Here's some more information about my setup. (i apologize in advance if this is too much information :) ) We have two physical offices, and a 10baseT link between them. the main office is LAN on the pfsense, the 2nd office is opt1. I also have voip phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 on the LAN in the main office. __ __ .1.0/24 .2.0/24 main office routed 2nd office __ __ vlan4 bridged vlan 4 .4.0/24 [.4.0/24] The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are vlan interfaces that belong to LAN and OPT1, respectively. I'm using the pfsense traffic shaper on the bridged vlan connection. I set it up using the wizard, and only setup the provision for asterisk/voip. Visit the tips and tricks forum thread which discusses some issues to look for. Last I heard the shaper does not work with bridged interfaces. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
I'm not sure if it was due to a reboot, mis-alignment of the planets, or the snapshot, but my queue status page is busted for me in the latest 1.0 snapshots. I'm currently running the 9-10 snapshot, and when i browse to the queue status page, all of the queue indicators get stuck on loading. Yes, i've hit the reload link at the bottom of the page. Any advice on how to troubleshoot this?
Re: [pfSense Support] traffic shapper: status queues broken as of 9-7 snapshot?
On 9/12/06, Rob Terhaar [EMAIL PROTECTED] wrote: I'm not sure if it was due to a reboot, mis-alignment of the planets, or the snapshot, but my queue status page is busted for me in the latest 1.0 snapshots. I'm currently running the 9-10 snapshot, and when i browse to the queue status page, all of the queue indicators get stuck on loading. Yes, i've hit the reload link at the bottom of the page. Any advice on how to troubleshoot this? killall -9 pfctl from a shell and rerun it. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]