RE: [pfSense Support] vlans and altq
Will await the next release and test again. Thanks for your comments -Original Message- From: Dan Swartzendruber [mailto:[EMAIL PROTECTED] Sent: Thursday, November 17, 2005 11:51 PM To: support@pfsense.com Subject: RE: [pfSense Support] vlans and altq At 06:04 PM 11/17/2005, you wrote: >Tried on 0.90 through to non released 0.93.2 >With the same troubles. > >I have vlans on both of the pfsense wan and lan interfaces. >Might try again tomorrow. To see if I can isolate it a bit Hmm, I remember an issue where the vlans didn't have a bandwidth, so the shaper got ticked off. Have you manually set one? Even if not, there's a change I sent in where it would default to 10mb if nothing was detected. Scott also committed a change where vlan was accepted as a valid shaper interface. >On Thu, 17 Nov 2005, alan walters wrote: > > > I was under the impression that altq has support for vlans. Is this > > enabled in pfsense at the moment. > > > > Have tried a couple of time but get unsupported interfaces. I know >that > > my fxp and sis cards support it > > > > > > > > So I guess it must be the vlans that are the issue > >what release are you running? i'm using this with fxp and it works >fine. >i remember it was dodgy for a bit, but bill and scott made some >changes... > > > > > >- >To unsubscribe, e-mail: [EMAIL PROTECTED] >For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] vlans and altq
At 06:04 PM 11/17/2005, you wrote: Tried on 0.90 through to non released 0.93.2 With the same troubles. I have vlans on both of the pfsense wan and lan interfaces. Might try again tomorrow. To see if I can isolate it a bit Hmm, I remember an issue where the vlans didn't have a bandwidth, so the shaper got ticked off. Have you manually set one? Even if not, there's a change I sent in where it would default to 10mb if nothing was detected. Scott also committed a change where vlan was accepted as a valid shaper interface. On Thu, 17 Nov 2005, alan walters wrote: > I was under the impression that altq has support for vlans. Is this > enabled in pfsense at the moment. > > Have tried a couple of time but get unsupported interfaces. I know that > my fxp and sis cards support it > > > > So I guess it must be the vlans that are the issue what release are you running? i'm using this with fxp and it works fine. i remember it was dodgy for a bit, but bill and scott made some changes... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] vlans and altq
Tried on 0.90 through to non released 0.93.2 With the same troubles. I have vlans on both of the pfsense wan and lan interfaces. Might try again tomorrow. To see if I can isolate it a bit On Thu, 17 Nov 2005, alan walters wrote: > I was under the impression that altq has support for vlans. Is this > enabled in pfsense at the moment. > > Have tried a couple of time but get unsupported interfaces. I know that > my fxp and sis cards support it > > > > So I guess it must be the vlans that are the issue what release are you running? i'm using this with fxp and it works fine. i remember it was dodgy for a bit, but bill and scott made some changes... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] vlans and altq
On Thu, 17 Nov 2005, alan walters wrote: I was under the impression that altq has support for vlans. Is this enabled in pfsense at the moment. Have tried a couple of time but get unsupported interfaces. I know that my fxp and sis cards support it So I guess it must be the vlans that are the issue what release are you running? i'm using this with fxp and it works fine. i remember it was dodgy for a bit, but bill and scott made some changes... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] vlans and altq
I was under the impression that altq has support for vlans. Is this enabled in pfsense at the moment. Have tried a couple of time but get unsupported interfaces. I know that my fxp and sis cards support it So I guess it must be the vlans that are the issue
