Re: IE Tab + 2.04.20110724
Dennis wrote: I found it and I didn't even want it, I can't even use it in linux. Probably wouldn't use it if my platform supported it because there is nothing about IE I find even remotely attractive. Dennis -- I suspect most of us share your view of IE; but some webmasters don't, thus this useful extension: Some web pages will only work properly when viewed with Internet Explorer. The Firefox IE Tab 2 extension allows you to run IE from within a tab in Firefox enabling you to display such web pages without leaving Firefox, and you can configure the extension to do so automatically for URLs you specify. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
BIll Spikowski wrote: Dennis wrote: I found it and I didn't even want it, I can't even use it in linux. Probably wouldn't use it if my platform supported it because there is nothing about IE I find even remotely attractive. Dennis -- I suspect most of us share your view of IE; but some webmasters don't, thus this useful extension: Some web pages will only work properly when viewed with Internet Explorer. The Firefox IE Tab 2 extension allows you to run IE from within a tab in Firefox enabling you to display such web pages without leaving Firefox, and you can configure the extension to do so automatically for URLs you specify. I use VLC, very good sincerely -- Gertjan Vinkesteijn http://facebook.com/gerardjan.vinkesteijn.3 http://ciudadpatricia.com Our source code is licensed under a MPL/GPL/LGPL tri-licsense, allowing our code to be easily reused in different environments. /* * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ die_if_kernel(Oops, regs, error_code); -- From linux/arch/i386/mm/fault.c ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Dennis wrote: Danny Kile wrote: Rickles wrote: Dennis wrote: Danny Kile wrote: Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/versions/ Thanks, Dennis. The v4.x link works fine, but v5.x installs without incident, then doesn't work. It's options are available thru Add-On Mgr, but no context menu options come up. Make sure you're not auto-updating your add-ons, or v5 will overwrite the v4 you just got working, and it'll stop working again. Thank you Dennis that link work great, at last I have a version of IE Tab that works. Thanks to all that responded with help. Danny, You guys are welcome but really you should be thanking WaltS. All I did was follow his link and do some slight investigating. If you follow Walt's link then scroll down to the bottom you will see Version Information, click on that and then you will see See complete version history . Click that and you wind up where my link takes you. Walt gave you the information, you just needed to follow his link with open eyes. I found it and I didn't even want it, I can't even use it in linux. Probably wouldn't use it if my platform supported it because there is nothing about IE I find even remotely attractive. Your correct... Thank you WaltS. Again you are correct I find there is nothing about IE I find even remotely attractive either. However, once in awhile your run into a website that will on run well on SM and you have to use IE. It is easier to switch rendering engines, than it is to launch IE and then copy and paste the URL. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Danny Kile wrote: Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/versions/ ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Dennis wrote: Danny Kile wrote: Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/versions/ Thanks, Dennis. The v4.x link works fine, but v5.x installs without incident, then doesn't work. It's options are available thru Add-On Mgr, but no context menu options come up. Make sure you're not auto-updating your add-ons, or v5 will overwrite the v4 you just got working, and it'll stop working again. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Rickles wrote: Dennis wrote: Danny Kile wrote: Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/versions/ Thanks, Dennis. The v4.x link works fine, but v5.x installs without incident, then doesn't work. It's options are available thru Add-On Mgr, but no context menu options come up. Make sure you're not auto-updating your add-ons, or v5 will overwrite the v4 you just got working, and it'll stop working again. Thank you Dennis that link work great, at last I have a version of IE Tab that works. Thanks to all that responded with help. Danny, ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Danny Kile wrote: Rickles wrote: Dennis wrote: Danny Kile wrote: Tom Pamin wrote: Danny Kile wrote: WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny The only version I've found to work with SM is IE Tab 2 v4.12.22.2. This works for me on all my PC's. And where can you find this version? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/versions/ Thanks, Dennis. The v4.x link works fine, but v5.x installs without incident, then doesn't work. It's options are available thru Add-On Mgr, but no context menu options come up. Make sure you're not auto-updating your add-ons, or v5 will overwrite the v4 you just got working, and it'll stop working again. Thank you Dennis that link work great, at last I have a version of IE Tab that works. Thanks to all that responded with help. Danny, You guys are welcome but really you should be thanking WaltS. All I did was follow his link and do some slight investigating. If you follow Walt's link then scroll down to the bottom you will see Version Information, click on that and then you will see See complete version history . Click that and you wind up where my link takes you. Walt gave you the information, you just needed to follow his link with open eyes. I found it and I didn't even want it, I can't even use it in linux. Probably wouldn't use it if my platform supported it because there is nothing about IE I find even remotely attractive. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
IE Tab + 2.04.20110724
I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: IE Tab + 2.04.20110724
WaltS wrote: Danny Kile wrote: I have the extension IE Tab + Version 2.04.20110724 installed on SM 2.24 sometime in the last few updates, IE Tabs has stopped working correctly. If I go to lets say Google.com using SM without IE Tab everything works just fine. However, if I go to the status line in the lower right corner of the screen and click on switch rendering engine it switches. However, I get a blank screen, I do however, get the IE icon on the URL address line. Clicking on switch rendering engine again does not switch if back to SM mode. Any suggestion on a way to resolve this would be greatly appreciated. Thank you in advance, Danny Try IE Tab V2? https://addons.mozilla.org/en-US/seamonkey/addon/ie-tab-2-sm-20/?src=ss OK I have removed my version IE Tab + Version 2.04.20110724, which I would have though was version 2 hence the 2.04.20110724. I then installed I then installed IE Tab 2. Everything install OK however, I do not have IE Tab icon in the Bookmark Toolbar or in the status/quick launch bar as I did before. So even though it installed I can not use to may to switch rendering engine. Anymore thoughts on this? Danny ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
