[Therion] distox
On Fri, 2010-04-16 at 04:49 +0100, Wookey wrote: ... > Here is a calib file. This one had 2 legs missing so has could of > extra 'downs' at the end. Not sure if that's fatal. If not could you > sned me back a set of numbers hi wookey, attached are the calibration coeffs of your disto. calibration shots are well distributed over the directions. max error is about 0.5 deg. did not play to get it lower. marco -- next part -- 0x85 0xf7 0x24 0x6e 0x1b 0x01 0x38 0xfe 0xd4 0x02 0x9c 0xff 0xfa 0x6d 0xde 0xff 0x28 0x02 0x54 0x00 0xde 0xff 0x20 0x6e 0x72 0x03 0x4c 0x3a 0x1f 0x00 0x38 0xfc 0xc1 0x00 0xbf 0xff 0xf4 0x3d 0xdd 0x00 0xf2 0x00 0xbd 0x00 0x11 0xfd 0x66 0x40 Calibration input data. G: -500 -652 13492 M: -12999 -2730 20333 Set 1 0 0.2828 G: -1325 -826 -14090 M: -16320 1418 -20075 Set 1 0 0.1866 G: -762 -14254 1010 M: -14636 -21555 -1071 Set 1 0 0.1642 G: 519 -1249 13565 M: 8998 -2668 21935 Set 2 0 0.1428 G: 629 -14418 519 M: 7949 -23521 -841 Set 2 0 0.1617 G: 373 -1451 -14246 M: 6528 -410 -22795 Set 2 0 0.0967 G: 251 13346 -1761 M: 7589 23201 -592 Set 2 0 0.0714 G: 1937 -1061 13572 M: 2668 8065 22337 Set 3 0 0.3078 G: 1600 13377 1302 M: 909 23603 -5748 Set 3 0 0.0149 G: 1716 -14048 3143 M: 1659 -20137 13265 Set 3 0 0.1040 G: 1487 -409 -14326 M: -420 -9393 -22649 Set 3 0 0.1067 G: 1395 -865 13617 M: -1205 -10803 20943 Set 4 0 0.0135 G: 1251 -559 -14314 M: -3685 9476 -21848 Set 4 0 0.1386 G: 1271 -14439 -1120 M: -3216 -22350 -11650 Set 4 0 0.0085 G: 851 13446 -1026 M: -2726 22826 8863 Set 4 0 0.1975 G: -12354 155 2833 M: -25422 -8683 2791 Set 5 0 0.2728 G: -12266 -3580 997 M: -25788 -6124 -7455 Set 5 0 0.0476 G: -12173 -1550 -3982 M: -25586 7722 -4709 Set 5 0 0.3924 G: -12144 3252 -1297 M: -24797 5200 7845 Set 5 0 0.1863 G: 15206 -474 350 M: 23183 -9955 -674 Set 6 0 0.1935 G: 15193 247 -57 M: 23594 -1435 9080 Set 6 0 0.4293 G: 15171 47 -733 M: 23021 10079 412 Set 6 0 0.1536 G: 15187 -1001 -628 M: 22529 -693 -10099 Set 6 0 0.3304 G: 8035 -12408 2614 M: 4206 -24463 -2547 Set 7 0 0.1148 G: 7892 -1541 -12567 M: 3207 5014 -22927 Set 7 0 0.0031 G: 7725 11931 -1566 M: 4333 23569 5251 Set 7 0 0.3416 G: -6600 10973 -874 M: -19268 15568 7171 Set 8 0 0.1586 G: -6156 296 11412 M: -18288 -7120 15563 Set 8 0 0.2600 G: -6230 -11097 4209 M: -19168 -18104 -1787 Set 8 0 0.2282 G: -6368 -1388 -12014 M: -20190 6350 -15729 Set 8 0 0.1321 G: -7592 -1414 -11041 M: -11298 -7829 -21555 Set 9 0 0.0469 G: -7086 -11361 -1445 M: -8939 -23630 2028 Set 9 0 0.2939 G: -6673 -672 11065 M: -6973 4681 22283 Set 9 0 0.1346 G: -7001 10617 744 M: -9093 23046 -3118 Set 9 0 0.5066 G: 7938 1614 11609 M: 17923 8603 14881 Set 10 0 0.5835 G: 7763 11844 957 M: 17081 17108 -3959 Set 10 0 0.0085 G: 7533 -1293 -12754 M: 15759 -7844 -16635 Set 10 0 0.2165 G: 7656 -12852 -1879 M: 16994 -17962 2955 Set 10 0 0.1824 G: 8389 -12446 -804 M: 5492 -23579 4658 Set 11 0 0.2201 G: 8078 -239 11793 M: 5836 6631 22212 Set 11 0 0.1308 G: 8063 11643 1379 M: 4832 23667 -3015 Set 11 0 0.1207 G: 7806 -254 -12635 M: 3024 -6612 -22983 Set 11 0 0.1055 G: -8124 464 -10625 M: -23226 -5773 -12976 Set 12 0 0.2822 G: -7908 1 -116 M: -22602 12761 -5964 Set 12 0 0.0868 G: -7640 469 10336 M: -21242 7680 12426 Set 12 0 0.0769 G: -7599 -11301 582 M: -21641 -13137 6892 Set 12 0 0.2612 G: -7824 -11122 577 M: -12351 -22007 -6711 Set 13 0 0.1439 G: -7654 -1548 -11091 M: -12621 5741 -21009 Set 13 0 0.5156 G: -7583 10229 -1462 M: -11106 21701 6043 Set 13 0 0.1283 G: -7484 -236 10545 M: -10339 -7808 20272 Set 13 0 0.1033 G: 8768 -684 11343 M: 18752 -7616 14253 Set 14 0 0.2325 G: 8795 -12156 1194 M: 17525 -16715 -5818 Set 14 0 0.1296 G: 8171 -2153 -12309 M: 16406 4611 -16777 Set 14 0 0.0583 G: 7763 11863 -1520 M: 17103 17264 5527 Set 14 0 0.1799 G: 15081 -44 929 M: 23602 5172 -6109 Set 15 0 0.4988 G: 15124 422 -239 M: 23363 -5131 -7310 Set 15 0 0.3134
[Therion] distox
+++ marco corvi [2010-04-14 13:14 +0200]: > On Wed, 2010-04-14 at 12:22 +0100, Wookey wrote: > > +++ marco corvi [2010-04-14 09:18 +0200]: > > > hi wookey, > > > the work on "my distox programs" is going on. > > > you can get the programs and dome docs on the page > > > http://marcocorvi.altervista.org/caving/distox/index.htm > > > > OK. good stuff. I will download, build and test tonight if I can. OK, I built the test progs and got bluetooth working. I can read data out with tlx_dump_data and set the device in calibration mode with tlx_toggle_calib. I thought I'd failed to read the calibration data out, but in fact it seems to be in calib_data.txt. I haven't yet managed to build the QT stuff. Or even tried to cross-build it all. Will try that tomorrow (later today). Here is a calib file. This one had 2 legs missing so has could of extra 'downs' at the end. Not sure if that's fatal. If not could you sned me back a set of numbers - tehy'll be better than nothing. (It's cold outside and very late so I can't be bothered doing it again right now :-) 0xfe0c 0xfd74 0x34b4 0xcd39 0xf556 0x4f6d -1 0 0xfad3 0xfcc6 0xc8f6 0xc040 0x058a 0xb195 -1 0 0xfd06 0xc852 0x03f2 0xc6d4 0xabcd 0xfbd1 -1 0 0x0207 0xfb1f 0x34fd 0x2326 0xf594 0x55af -1 0 0x0275 0xc7ae 0x0207 0x1f0d 0xa41f 0xfcb7 -1 0 0x0175 0xfa55 0xc85a 0x1980 0xfe66 0xa6f5 -1 0 0x00fb 0x3422 0xf91f 0x1da5 0x5aa1 0xfdb0 -1 0 0x0791 0xfbdb 0x3504 0x0a6c 0x1f81 0x5741 -1 0 0x0640 0x3441 0x0516 0x038d 0x5c33 0xe98c -1 0 0x06b4 0xc920 0x0c47 0x067b 0xb157 0x33d1 -1 0 0x05cf 0xfe67 0xc80a 0xfe5c 0xdb4f 0xa787 -1 0 0x0573 0xfc9f 0x3531 0xfb4b 0xd5cd 0x51cf -1 0 0x04e3 0xfdd1 0xc816 0xf19b 0x2504 0xaaa8 -1 0 0x04f7 0xc799 0xfba0 0xf370 0xa8b2 0xd27e -1 0 0x0353 0x3486 0xfbfe 0xf55a 0x592a 0x229f -1 0 0xcfbe 0x009b 0x0b11 0x9cb2 0xde15 0x0ae7 -1 0 0xd016 0xf204 0x03e5 0x9b44 0xe814 0xe2e1 -1 0 0xd073 0xf9f2 0xf072 0x9c0e 0x1e2a 0xed9b -1 0 0xd090 0x0cb4 0xfaef 0x9f23 0x1450 0x1ea5 -1 0 0x3b66 0xfe26 0x015e 0x5a8f 0xd91d 0xfd5e -1 0 0x3b59 0x00f7 0xffc7 0x5c2a 0xfa65 0x2378 -1 0 0x3b43 0x002f 0xfd23 0x59ed 0x275f 0x019c -1 0 0x3b53 0xfc17 0xfd8c 0x5801 0xfd4b 0xd88d -1 0 0x1f63 0xcf88 0x0a36 0x106e 0xa071 0xf60d -1 0 0x1ed4 0xf9fb 0xcee9 0x0c87 0x1396 0xa671 -1 0 0x1e2d 0x2e9b 0xf9e2 0x10ed 0x5c11 0x1483 -1 0 0xe638 0x2add 0xfc96 0xb4bc 0x3cd0 0x1c03 -1 0 0xe7f4 0x0128 0x2c94 0xb890 0xe430 0x3ccb -1 0 0xe7aa 0xd4a7 0x1071 0xb520 0xb948 0xf905 -1 0 0xe720 0xfa94 0xd112 0xb122 0x18ce 0xc28f -1 0 0xe258 0xfa7a 0xd4df 0xd3de 0xe16b 0xabcd -1 0 0xe452 0xd39f 0xfa5b 0xdd15 0xa3b2 0x07ec -1 0 0xe5ef 0xfd60 0x2b39 0xe4c3 0x1249 0x570b -1 0 0xe4a7 0x2979 0x02e8 0xdc7b 0x5a06 0xf3d2 -1 0 0x1f02 0x064e 0x2d59 0x4603 0x219b 0x3a21 -1 0 0x1e53 0x2e44 0x03bd 0x42b9 0x42d4 0xf089 -1 0 0x1d6d 0xfaf3 0xce2e 0x3d8f 0xe15c 0xbf05 -1 0 0x1de8 0xcdcc 0xf8a9 0x4262 0xb9d6 0x0b8b -1 0 0x20c5 0xcf62 0xfcdc 0x1574 0xa3e5 0x1232 -1 0 0x1f8e 0xff11 0x2e11 0x16cc 0x19e7 0x56c4 -1 0 0x1f7f 0x2d7b 0x0563 0x12e0 0x5c73 0xf439 -1 0 0x1e7e 0xff02 0xcea5 0x0bd0 0xe62c 0xa639 -1 0 0xe044 0x01d0 0xd67f 0xa546 0xe973 0xcd50 -1 0 0xe11c 0x2710 0xff8c 0xa7b6 0x31d9 0xe8b4 -1 0 0xe228 0x01d5 0x2860 0xad06 0x1e00 0x308a -1 0 0xe251 0xd3db 0x0246 0xab77 0xccaf 0x1aec -1 0 0xe170 0xd48e 0x0241 0xcfc1 0xaa09 0xe5c9 -1 0 0xe21a 0xf9f4 0xd4ad 0xceb3 0x166d 0xadef -1 0 0xe261 0x27f5 0xfa4a 0xd49e 0x54c5 0x179b -1 0 0xe2c4 0xff14 0x2931 0xd79d 0xe180 0x4f30 -1 0 0x2240 0xfd54 0x2c4f 0x4940 0xe240 0x37ad -1 0 0x225b 0xd084 0x04aa 0x4475 0xbeb5 0xe946 -1 0 0x1feb 0xf797 0xcfeb 0x4016 0x1203 0xbe77 -1 0 0x1e53 0x2e57 0xfa10 0x42cf 0x4370 0x1597 -1 0 0x3ae9 0xffd4 0x03a1 0x5c32 0x1434 0xe823 -1 0 0x3b14 0x01a6 0xff11 0x5b43 0xebf5 0xe372 -1 0 I'll debianise your package and upload it once I have it all working. Wookey -- Principal hats: iEndian - Balloonboard - Toby Churchill - Emdebian http://wookware.org/
