Re: [time-nuts] PICTIC II PCB order placed
Hi, Could you put me down for 1 PCB please. 73 Richard G3VZG ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
You are on the list. Stanley - Original Message From: f1ehx To: Discussion of precise time and frequency measurement Sent: Sun, July 4, 2010 3:50:16 AM Subject: Re: [time-nuts] PICTIC II PCB order placed Please, Add me for 2 pieces, Thank-you, Bernard, F1EHX. - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Friday, July 02, 2010 6:46 PM Subject: [time-nuts] PICTIC II PCB order placed Oops, I didn't know this was on the list been getting a lot of off list stuff. Some of my own emails to the list get lost before they get to me, others are delayed this is a on going problem probably a yahoo spam filter overload. UPDATE on order: I have placed the order for more boards than needed and hope to receive them in less than 2 weeks. As far as shipping think it will be easy for me if we call it 1 USD per board. I will let everyone gage when they need to mail their US funds check/money order. If you are paying by paypal add 50 cents per board for a total of 9.50. No need for payment till I receive the boards unless you are unsure how long it will take for me to receive it. Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 USA If your software will only work with Irondale and not Birmingham this is OK Stanley Reynolds 225 Alpine Street Irondale, AL 35210 USA paypal stanley_reyno...@yahoo.com - Original Message From: Bob Bownes To: Discussion of precise time and frequency measurement Sent: Fri, July 2, 2010 10:45:36 AM Subject: Re: [time-nuts] Pic programing for the PICTIC II Ok. I think there are a few of us who can/would program these up for folks who need one. On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds wrote: > Thank you but I have all I want to do with the boards later I may change my > mind. > > Stanley > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. --- Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Can i have 2 pieces please ? Thanks in advance Emmanouil Mantzaras sv1bke -- Original Message -- Received: Sun, 04 Jul 2010 11:49:54 AM EEST From: "f1ehx" To: "Discussion of precise time and frequency measurement" Subject: Re: [time-nuts] PICTIC II PCB order placed Please, Add me for 2 pieces, Thank-you, Bernard, F1EHX. - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Friday, July 02, 2010 6:46 PM Subject: [time-nuts] PICTIC II PCB order placed Oops, I didn't know this was on the list been getting a lot of off list stuff. Some of my own emails to the list get lost before they get to me, others are delayed this is a on going problem probably a yahoo spam filter overload. UPDATE on order: I have placed the order for more boards than needed and hope to receive them in less than 2 weeks. As far as shipping think it will be easy for me if we call it 1 USD per board. I will let everyone gage when they need to mail their US funds check/money order. If you are paying by paypal add 50 cents per board for a total of 9.50. No need for payment till I receive the boards unless you are unsure how long it will take for me to receive it. Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 USA If your software will only work with Irondale and not Birmingham this is OK Stanley Reynolds 225 Alpine Street Irondale, AL 35210 USA paypal stanley_reyno...@yahoo.com - Original Message From: Bob Bownes To: Discussion of precise time and frequency measurement Sent: Fri, July 2, 2010 10:45:36 AM Subject: Re: [time-nuts] Pic programing for the PICTIC II Ok. I think there are a few of us who can/would program these up for folks who need one. On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds wrote: > Thank you but I have all I want to do with the boards later I may change my > mind. > > Stanley > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. --- Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Please, Add me for 2 pieces, Thank-you, Bernard, F1EHX. - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Friday, July 02, 2010 6:46 PM Subject: [time-nuts] PICTIC II PCB order placed Oops, I didn't know this was on the list been getting a lot of off list stuff. Some of my own emails to the list get lost before they get to me, others are delayed this is a on going problem probably a yahoo spam filter overload. UPDATE on order: I have placed the order for more boards than needed and hope to receive them in less than 2 weeks. As far as shipping think it will be easy for me if we call it 1 USD per board. I will let everyone gage when they need to mail their US funds check/money order. If you are paying by paypal add 50 cents per board for a total of 9.50. No need for payment till I receive the boards unless you are unsure how long it will take for me to receive it. Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 USA If your software will only work with Irondale and not Birmingham this is OK Stanley Reynolds 225 Alpine Street Irondale, AL 35210 USA paypal stanley_reyno...@yahoo.com - Original Message From: Bob Bownes To: Discussion of precise time and frequency measurement Sent: Fri, July 2, 2010 10:45:36 AM Subject: Re: [time-nuts] Pic programing for the PICTIC II Ok. I think there are a few of us who can/would program these up for folks who need one. On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds wrote: Thank you but I have all I want to do with the boards later I may change my mind. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. --- Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Ill take two boards by the way. Thanks! On 7/3/10, Stanley Reynolds wrote: > > > No problem, I expect to have the boards 7/21, I will have plenty. > > Stanley > > > > > - Original Message > From: Robert Berg > To: Discussion of precise time and frequency measurement > > Sent: Sat, July 3, 2010 9:26:49 AM > Subject: Re: [time-nuts] PICTIC II PCB order placed > > Stanley, > > If it's not too late, could I order 2 boards, please? > > Thanks! > > Robert Berg > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Hello, Can You add me to Your order list ? I would like to buy 2 pcb Best regards, Artur Dworak sp5qa Stanley Reynolds pisze: > No problem, I expect to have the boards 7/21, I will have plenty. > > Stanley > > > > > - Original Message > From: Robert Berg > To: Discussion of precise time and frequency measurement > Sent: Sat, July 3, 2010 9:26:49 AM > Subject: Re: [time-nuts] PICTIC II PCB order placed > > Stanley, > > If it's not too late, could I order 2 boards, please? > > Thanks! > > Robert Berg > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Many thanks, gracias Ignacio, Arnold Am 03.07.2010 20:35, schrieb EB4APL: > I already volunteered to program the PICs for Europe. I'll elaborate > more as things progress. > > Regards, > Ignacio, EB4APL > > Arnold Tibus wrote: >> Hello Stanley, >> >> I wrote already twice offline, but it looks like >> it doesn't arrive. >> So I ask this way, if it is not too late, >> can I order as well 2 ea.? Who can provide the >> programmed pics (best in Europe for Germany)? >> >> Many thanks, >> >> Arnold >> >> >> Am 03.07.2010 18:27, schrieb Stanley Reynolds: >> >>> No problem, I expect to have the boards 7/21, I will have plenty. >>> >>> Stanley >>> >>> >>> >>> >>> ----- Original Message >>> From: Robert Berg >>> To: Discussion of precise time and frequency measurement >>> >>> Sent: Sat, July 3, 2010 9:26:49 AM >>> Subject: Re: [time-nuts] PICTIC II PCB order placed >>> >>> Stanley, >>> >>> If it's not too late, could I order 2 boards, please? >>> >>> Thanks! >>> >>> Robert Berg >>> >>> >>> >>> ___ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
I already volunteered to program the PICs for Europe. I'll elaborate more as things progress. Regards, Ignacio, EB4APL Arnold Tibus wrote: Hello Stanley, I wrote already twice offline, but it looks like it doesn't arrive. So I ask this way, if it is not too late, can I order as well 2 ea.? Who can provide the programmed pics (best in Europe for Germany)? Many thanks, Arnold Am 03.07.2010 18:27, schrieb Stanley Reynolds: No problem, I expect to have the boards 7/21, I will have plenty. Stanley - Original Message From: Robert Berg To: Discussion of precise time and frequency measurement Sent: Sat, July 3, 2010 9:26:49 AM Subject: Re: [time-nuts] PICTIC II PCB order placed Stanley, If it's not too late, could I order 2 boards, please? Thanks! Robert Berg ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
No problem you are on the list, expect to have plenty boards 7/21. Stanley - Original Message From: Arnold Tibus To: Discussion of precise time and frequency measurement Sent: Sat, July 3, 2010 1:06:01 PM Subject: Re: [time-nuts] PICTIC II PCB order placed Hello Stanley, I wrote already twice offline, but it looks like it doesn't arrive. So I ask this way, if it is not too late, can I order as well 2 ea.? Who can provide the programmed pics (best in Europe for Germany)? Many thanks, Arnold Am 03.07.2010 18:27, schrieb Stanley Reynolds: > > > No problem, I expect to have the boards 7/21, I will have plenty. > > Stanley > > > > > - Original Message > From: Robert Berg > To: Discussion of precise time and frequency measurement > Sent: Sat, July 3, 2010 9:26:49 AM > Subject: Re: [time-nuts] PICTIC II PCB order placed > > Stanley, > > If it's not too late, could I order 2 boards, please? > > Thanks! > > Robert Berg > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Hello Stanley, I wrote already twice offline, but it looks like it doesn't arrive. So I ask this way, if it is not too late, can I order as well 2 ea.? Who can provide the programmed pics (best in Europe for Germany)? Many thanks, Arnold Am 03.07.2010 18:27, schrieb Stanley Reynolds: > > > No problem, I expect to have the boards 7/21, I will have plenty. > > Stanley > > > > > - Original Message > From: Robert Berg > To: Discussion of precise time and frequency measurement > Sent: Sat, July 3, 2010 9:26:49 AM > Subject: Re: [time-nuts] PICTIC II PCB order placed > > Stanley, > > If it's not too late, could I order 2 boards, please? > > Thanks! > > Robert Berg > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
No problem, I expect to have the boards 7/21, I will have plenty. Stanley - Original Message From: Robert Berg To: Discussion of precise time and frequency measurement Sent: Sat, July 3, 2010 9:26:49 AM Subject: Re: [time-nuts] PICTIC II PCB order placed Stanley, If it's not too late, could I order 2 boards, please? Thanks! Robert Berg ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Stanley, If it's not too late, could I order 2 boards, please? Thanks! Robert Berg ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
Best source of info is : http://www.ko4bb.com/dokuwiki/doku.php?id=precision_timing:pictic A simple time interval counter to connect at a PC serial port. Sort of a experimenter's way to understand how the instrument works without too much complexity. Stanley - Original Message From: Richard W. Solomon To: Discussion of precise time and frequency measurement Sent: Fri, July 2, 2010 12:44:48 PM Subject: Re: [time-nuts] PICTIC II PCB order placed All this talk about the PICTIC has aroused my curiosity ... I missed the beginning of the thread, what is it for ? I may want on the wagon too !! 73, Dick, W1KSZ -Original Message- >From: Stanley Reynolds >Sent: Jul 2, 2010 9:46 AM >To: Discussion of precise time and frequency measurement >Subject: [time-nuts] PICTIC II PCB order placed > >Oops, I didn't know this was on the list been getting a lot of off list stuff. > >Some of my own emails to the list get lost before they get to me, others are >delayed this is a on going problem probably a yahoo spam filter overload. > >UPDATE on order: > >I have placed the order for more boards than needed and hope to receive them >in >less than 2 weeks. > >As far as shipping think it will be easy for me if we call it 1 USD per board. >I > >will let everyone gage when they need to mail their US funds check/money >order. >If you are paying by paypal add 50 cents per board for a total of 9.50. No >need >for payment till I receive the boards unless you are unsure how long it will >take for me to receive it. > >Stanley Reynolds >225 Alpine Street >Birmingham, AL 35210 >USA > >If your software will only work with Irondale and not Birmingham this is OK > >Stanley Reynolds >225 Alpine Street >Irondale, AL 35210 >USA > >paypal stanley_reyno...@yahoo.com > > > > > > > >- Original Message >From: Bob Bownes >To: Discussion of precise time and frequency measurement >Sent: Fri, July 2, 2010 10:45:36 AM >Subject: Re: [time-nuts] Pic programing for the PICTIC II > >Ok. I think there are a few of us who can/would program these up for >folks who need one. > > >On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds > wrote: >> Thank you but I have all I want to do with the boards later I may change my >> mind. >> >> Stanley >> > > >___ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II PCB order placed
All this talk about the PICTIC has aroused my curiosity ... I missed the beginning of the thread, what is it for ? I may want on the wagon too !! 73, Dick, W1KSZ -Original Message- >From: Stanley Reynolds >Sent: Jul 2, 2010 9:46 AM >To: Discussion of precise time and frequency measurement >Subject: [time-nuts] PICTIC II PCB order placed > >Oops, I didn't know this was on the list been getting a lot of off list stuff. > >Some of my own emails to the list get lost before they get to me, others are >delayed this is a on going problem probably a yahoo spam filter overload. > >UPDATE on order: > >I have placed the order for more boards than needed and hope to receive them >in >less than 2 weeks. > >As far as shipping think it will be easy for me if we call it 1 USD per board. >I >will let everyone gage when they need to mail their US funds check/money >order. >If you are paying by paypal add 50 cents per board for a total of 9.50. No >need >for payment till I receive the boards unless you are unsure how long it will >take for me to receive it. > >Stanley Reynolds >225 Alpine Street >Birmingham, AL 35210 >USA > >If your software will only work with Irondale and not Birmingham this is OK > >Stanley Reynolds >225 Alpine Street >Irondale, AL 35210 >USA > >paypal stanley_reyno...@yahoo.com > > > > > > > >- Original Message >From: Bob Bownes >To: Discussion of precise time and frequency measurement >Sent: Fri, July 2, 2010 10:45:36 AM >Subject: Re: [time-nuts] Pic programing for the PICTIC II > >Ok. I think there are a few of us who can/would program these up for >folks who need one. > > >On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds > wrote: >> Thank you but I have all I want to do with the boards later I may change my >> mind. >> >> Stanley >> > > >___ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
