[Tinyos-help] help needed... how to set up the hardware??

2007-08-25 Thread jothi jothi
Dear sir,
   
  I am a student developing a system in wirelsess sensor nodes.Recently i am 
doing some work with the crossbow products..(micaz2,MIB5100,MIB600,TMS300,,,)
   
  At first i use MIB510,usg the serial connector...i just install the micaz to 
mib 510(just fix it on the top of it,using the 51 pin..).But then i dont know 
how to install the sensor bodes onto micaz2.When i refer to the guideline which 
was in the pdf format,sensor boards have to connect/install with the 
micaz...But how?
   
  So what i did it is,i saw there is another 51 pins at another side of 
MIB510,so i just install the sensor to it...Is that correct??
   
   
  Second ,i use the the MIB600...i am having the same problem here...i dont 
know how the sensor boards have to be installed with micaz...there are housing 
provided for the sensor boardswhere the housing have battery on bottom of 
the housing...sensor boards have to installed with mote assembly board an dthen 
only placed it in the housingBut i couldnt find the mote assembly...??we 
bought the hardware as one full set...
   
   
  Sir ,can u explain in brief,how i can use the MIB600,Micaz,sensor 
boards.I really need help...since here in my college nobody have used these 
tool before..my project is basically about detecting the environmental 
changeslike temperature,humidity...now the main problem is i dont know 
about the setup of the tool...and how it works??By the way i am using Mote 
view,to collect and view data...
   
  I had been sending mails to quite number of peoples who involved in this ,but 
until now there is no reply...
   
   
  Hope that i will ger a reply...Your explaination very much appreciated
   
  Thank you...

   
-
Park yourself in front of a world of choices in alternative vehicles.
Visit the Yahoo! Auto Green Center.___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Re: [Tinyos-help] help needed... how to set up the hardware??

2007-08-25 Thread Peizhao Hu

With regard to your first question:
To my understanding, MicaZ or Mica2 is battery powered. so you have 
access to the 51 Pin connector for your sensor board. The reasons you 
want to connect your Micaz/Mica2 to the MIB500 programming board are 
either you want to reprogram the TinyOS application or to use the serial 
communication just like a server/client kind communication.


Overall, I will suggest you to follow the Official TinyOS tutorials.
Thinking what you are trying to do. I will say Lesson 4 and 5 are what 
you are looking for at

http://www.tinyos.net/tinyos-2.x/doc/html/tutorial/index.html

Enjoy :-)

regards;

Peizhao


jothi jothi wrote:

Dear sir,
 
I am a student developing a system in wirelsess sensor nodes.Recently i 
am doing some work with the crossbow 
products..(micaz2,MIB5100,MIB600,TMS300,,,)
 
At first i use MIB510,usg the serial connector...i just install the 
micaz to mib 510(just fix it on the top of it,using the 51 pin..).But 
then i dont know how to install the sensor bodes onto micaz2.When i 
refer to the guideline which was in the pdf format,sensor boards have to 
connect/install with the micaz...But how?
 
So what i did it is,i saw there is another 51 pins at another side of 
MIB510,so i just install the sensor to it...Is that correct??
 
 
Second ,i use the the MIB600...i am having the same problem here...i 
dont know how the sensor boards have to be installed with micaz...there 
are housing provided for the sensor boardswhere the housing have 
battery on bottom of the housing...sensor boards have to installed with 
mote assembly board an dthen only placed it in the housingBut i 
couldnt find the mote assembly...??we bought the hardware as one full set...
 
 
Sir ,can u explain in brief,how i can use the MIB600,Micaz,sensor 
boards.I really need help...since here in my college nobody have 
used these tool before..my project is basically about detecting the 
environmental changeslike temperature,humidity...now the main 
problem is i dont know about the setup of the tool...and how it 
works??By the way i am using Mote view,to collect and view data...
 
I had been sending mails to quite number of peoples who involved in this 
,but until now there is no reply...
 
 
Hope that i will ger a reply...Your explaination very much appreciated
 
Thank you...



Park yourself in front of a world of choices in alternative vehicles.
Visit the Yahoo! Auto Green Center. 
http://us.rd.yahoo.com/evt=48246/*http://autos.yahoo.com/green_center/;_ylc=X3oDMTE5cDF2bXZzBF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDZ3JlZW4tY2VudGVy 






___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help