[Tinyos-help] TOSSIM error
Hey Kartik you have not installed or added the Pythin development library. If using UBUNTU, Go to synaptic packet manager and add insatll the python-devel something like library. That will remove the error. ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] where can I find tinyos updated version?
Hello, As tinyos is being updated every day, so please from where can I download the lasted version of this embedded operating system? Thanks! -- Best regards, Alfred.Nooobel ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Failed to enter programming mode
Finally, I have reinstalled the system, but still I get the same error. The device manager seems to show quite normal results: Com3 and Com4 are recognized, so the driver is installed. Could it be a driver-problem? Has anybody an idea? Thank you for the information about the motelist command. It has worked with Moteview and Micaz and so I thought, it must also work here. Best regards Isabelle --- > Did you move the USB cable to a different port? > Widows seems to like to re-assign COM port numbers > based on where they are connected. You might try > looking in the Device Manager under "Ports" to see > if it has any enlightening details. > > On the subject of Motelist. It only works with telos > type devices. The micas don't respond to USB inquiries. > > MS > > Isabelle Hang wrote: > > Hi all, > > > > I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am quite > > new, so do you need further information?) > > It was all working fine and I was able to program the motes. > > But suddenly I get the following error, if I try to install a program > > on a mote: > > > > > > $make micaz install mib510./dev/ttyS2 > > mkdir -p build/micaz > > . > > . > > . > > writing TOS image > > cp build/micaz/main.srec build/micaz/main.srec.out > > installing micaz binary using mib510 > > uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 > > -dpart=ATmega128 --wr_fuse_e=ff --erase --upload > > if=build/micaz/main.srec.out > > Firmware Version: . > > Failed to enter programming mode. > > make: *** [program] Error 2 > > > > I have looked in the mailinglist, but there was no proper solution for > > this problem. > > Please can you help me? I have no idea how to fix this problem. > > > > Best regards, > > Isa > > ___ > > Tinyos-help mailing list > > Tinyos-help@millennium.berkeley.edu > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he lp > ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] MIB600 Xsocket no response
Hello I use MIB600, IRIS, and PC I can successfully ping MIB600. And I can download program into MIB600 also. But I can not use Xserve to read data from MIB600 like what i do with MIB520. The error mesage is Xsocket: No response from 192.168.1.3: 1002 I already ajust MIB600 setting as such: Port1: 115200, 10001 Port2: 56700, 10002 I attached a error screen shot in the attachment Best regards Joe _ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969<>___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] where can I find tinyos updated version?
You should download the cvs version: cvs -z3 -d:pserver:anonym...@tinyos.cvs.sourceforge.net:/cvsroot/tinyos co -P tinyos-2.x *Jordi Soucheiron* Software Engineer *DEXMA* Parc Tecnològic la Salle Sant Joan de la Salle, 42 08022 Barcelona t/f: [+34] 93 181 01 95 www.dexmatech.com jsouchei...@dexmatech.com 2010/3/4 Alfred NOBEL > Hello, > > As tinyos is being updated every day, so please from where can I download > the lasted version of this embedded operating system? > > Thanks! > -- > Best regards, > Alfred.Nooobel > > ___ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Invitation to connect on LinkedIn
LinkedIn song guo requested to add you as a connection on LinkedIn: -- Davide, I'd like to add you to my professional network on LinkedIn. - song Accept invitation from song guo http://www.linkedin.com/e/DQCGT3GB9z4raacyxHEZ6GwS_HFHC0dZ_bJG6UZ99BqwCW9clJdr/blk/I574365341_3/pmpxnSRJrSdvj4R5fnhv9ClRsDgZp6lQs6lzoQ5AomZIpn8_cRYNd3cRdzcQdPl9bRlinQBqtSdObP4OdzwQe30Ocj4LrCBxbOYWrSlI/EML_comm_afe/ View invitation from song guo http://www.linkedin.com/e/DQCGT3GB9z4raacyxHEZ6GwS_HFHC0dZ_bJG6UZ99BqwCW9clJdr/blk/I574365341_3/0PnP4QcPkScPgTdkALqnpPbOYWrSlI/svi/ -- Why might connecting with song guo be a good idea? song guo's connections could be useful to you: After accepting song guo's invitation, check song guo's connections to see who else you may know and who you might want an introduction to. Building these connections can create opportunities in the future. -- (c) 2010, LinkedIn Corporation___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Failed to enter programming mode
I think the MIB520 has two ports, one for programming and one for data I/O. I of course forget which is which, have you tried both? Do you have any motes already programmed to send data to the PC that you can try as well? I could be wrong about motelist. It might work in some fashion with the 520 since it is a USB device as well. Each vendor and version seems to have a different version of the program, so the Moteview one could work as you say. MS Isabelle Hang wrote: > Finally, I have reinstalled the system, but still I get the same > error. > The device manager seems to show quite normal results: Com3 and Com4 > are recognized, so the driver is installed. > Could it be a driver-problem? Has anybody an idea? > > Thank you for the information about the motelist command. It has > worked with Moteview and Micaz and so I thought, it must also work > here. > > Best regards > Isabelle > > --- >> Did you move the USB cable to a different port? >> Widows seems to like to re-assign COM port numbers >> based on where they are connected. You might try >> looking in the Device Manager under "Ports" to see >> if it has any enlightening details. >> >> On the subject of Motelist. It only works with telos >> type devices. The micas don't respond to USB inquiries. >> >> MS >> >> Isabelle Hang wrote: >>> Hi all, >>> >>> I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am quite >>> new, so do you need further information?) >>> It was all working fine and I was able to program the motes. >>> But suddenly I get the following error, if I try to install a > program >>> on a mote: >>> >>> >>> $make micaz install mib510./dev/ttyS2 >>> mkdir -p build/micaz >>> . >>> . >>> . >>> writing TOS image >>> cp build/micaz/main.srec build/micaz/main.srec.out >>> installing micaz binary using mib510 >>> uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 >>> -dpart=ATmega128 --wr_fuse_e=ff --erase --upload >>> if=build/micaz/main.srec.out >>> Firmware Version: . >>> Failed to enter programming mode. >>> make: *** [program] Error 2 >>> >>> I have looked in the mailinglist, but there was no proper solution > for >>> this problem. >>> Please can you help me? I have no idea how to fix this problem. >>> >>> Best regards, >>> Isa >>> ___ >>> Tinyos-help mailing list >>> Tinyos-help@millennium.berkeley.edu >>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he > lp > ___ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Failed to enter programming mode
Using the first port, I get the described error, using the second port, I get the message 'Programmer is not responding'. I guess the latter is the data port. Really weird is, that the uploading sometimes works.(Perhaps one time out of fifty). I have really no idea! Have anybody a clue? Best regards, Isabelle --- > I think the MIB520 has two ports, one for programming > and one for data I/O. I of course forget which is which, > have you tried both? Do you have any motes already programmed > to send data to the PC that you can try as well? > > I could be wrong about motelist. It might work in some > fashion with the 520 since it is a USB device as well. > Each vendor and version seems to have a different version > of the program, so the Moteview one could work as you say. > > MS > > Isabelle Hang wrote: > > Finally, I have reinstalled the system, but still I get the same > > error. > > The device manager seems to show quite normal results: Com3 and Com4 > > are recognized, so the driver is installed. > > Could it be a driver-problem? Has anybody an idea? > > > > Thank you for the information about the motelist command. It has > > worked with Moteview and Micaz and so I thought, it must also work > > here. > > > > Best regards > > Isabelle > > > > --- > >> Did you move the USB cable to a different port? > >> Widows seems to like to re-assign COM port numbers > >> based on where they are connected. You might try > >> looking in the Device Manager under "Ports" to see > >> if it has any enlightening details. > >> > >> On the subject of Motelist. It only works with telos > >> type devices. The micas don't respond to USB inquiries. > >> > >> MS > >> > >> Isabelle Hang wrote: > >>> Hi all, > >>> > >>> I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am quite > >>> new, so do you need further information?) > >>> It was all working fine and I was able to program the motes. > >>> But suddenly I get the following error, if I try to install a > > program > >>> on a mote: > >>> > >>> > >>> $make micaz install mib510./dev/ttyS2 > >>> mkdir -p build/micaz > >>> . > >>> . > >>> . > >>> writing TOS image > >>> cp build/micaz/main.srec build/micaz/main.srec.out > >>> installing micaz binary using mib510 > >>> uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 > >>> -dpart=ATmega128 --wr_fuse_e=ff --erase --upload > >>> if=build/micaz/main.srec.out > >>> Firmware Version: . > >>> Failed to enter programming mode. > >>> make: *** [program] Error 2 > >>> > >>> I have looked in the mailinglist, but there was no proper solution > > for > >>> this problem. > >>> Please can you help me? I have no idea how to fix this problem. > >>> > >>> Best regards, > >>> Isa > >>> ___ > >>> Tinyos-help mailing list > >>> Tinyos-help@millennium.berkeley.edu > >>> > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he > > lp > > ___ > > Tinyos-help mailing list > > Tinyos-help@millennium.berkeley.edu > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he lp > ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] low power listening in tossim under TinyOS-2.1
Hi all, Is it possible to simulate low power listening in tossim under T2? It seems like lpl implementation in T2 only works for testbed, please correct me if I'm wrong :) Or does someone has a beta version of low power listening component for T2's tossim? I would be very happy to help you verify it. Thanks for your help! -- Best, Yang ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] TinyLD
Dear all, As far as i know TinyLD is implemented only in msp430. Do you have an implementation in atmega(micaz) platform? thanks ranal _ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/201469227/direct/01/___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] tosthreads
Hi, i'm new to tosthreads. i have a question. once you create a tosthread application do we have to explicitly create the tinyos thread to handle to tasks posted by other application threads? any help will be appreciated! nimal ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Failed to enter programming mode
Yes, I went and looked. The low port # is the programmer, high # is for MOTECOM. Perhaps you can try your programmer on a different host machine? Or different USB jack/hub/etc? MS Isabelle Hang wrote: > Using the first port, I get the described error, using the second > port, I get the message 'Programmer is not responding'. > I guess the latter is the data port. > Really weird is, that the uploading sometimes works.(Perhaps one time > out of fifty). > I have really no idea! Have anybody a clue? > > Best regards, > Isabelle > --- >> I think the MIB520 has two ports, one for programming >> and one for data I/O. I of course forget which is which, >> have you tried both? Do you have any motes already programmed >> to send data to the PC that you can try as well? >> >> I could be wrong about motelist. It might work in some >> fashion with the 520 since it is a USB device as well. >> Each vendor and version seems to have a different version >> of the program, so the Moteview one could work as you say. >> >> MS >> >> Isabelle Hang wrote: >>> Finally, I have reinstalled the system, but still I get the same >>> error. >>> The device manager seems to show quite normal results: Com3 and > Com4 >>> are recognized, so the driver is installed. >>> Could it be a driver-problem? Has anybody an idea? >>> >>> Thank you for the information about the motelist command. It has >>> worked with Moteview and Micaz and so I thought, it must also work >>> here. >>> >>> Best regards >>> Isabelle >>> >>> --- Did you move the USB cable to a different port? Widows seems to like to re-assign COM port numbers based on where they are connected. You might try looking in the Device Manager under "Ports" to see if it has any enlightening details. On the subject of Motelist. It only works with telos type devices. The micas don't respond to USB inquiries. MS Isabelle Hang wrote: > Hi all, > > I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am > quite > new, so do you need further information?) > It was all working fine and I was able to program the motes. > But suddenly I get the following error, if I try to install a >>> program > on a mote: > > > $make micaz install mib510./dev/ttyS2 > mkdir -p build/micaz > . > . > . > writing TOS image > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary using mib510 > uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 > -dpart=ATmega128 --wr_fuse_e=ff --erase --upload > if=build/micaz/main.srec.out > Firmware Version: . > Failed to enter programming mode. > make: *** [program] Error 2 > > I have looked in the mailinglist, but there was no proper > solution >>> for > this problem. > Please can you help me? I have no idea how to fix this problem. > > Best regards, > Isa > ___ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he >>> lp >>> ___ >>> Tinyos-help mailing list >>> Tinyos-help@millennium.berkeley.edu >>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he > lp ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] tosthreads
No, that is taken care of for you. Take a look at the examples in tinyos-2.x/apps/tosthreads to see how to construct an application. Kevin On Thu, Mar 4, 2010 at 12:07 PM, Nimal Giya wrote: > Hi, > > i'm new to tosthreads. i have a question. > once you create a tosthread application do we have to explicitly create the > tinyos thread to handle to tasks posted by other application threads? > any help will be appreciated! > nimal > > > ___ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- ~Kevin ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] (no subject)
Dear all, I have implemented AMSend.send command in my program. But i see there is no AMSend.sendDone signalled. Can somebody tell me why this is happening?i ran the application in TOSSIM Thanks in advance. Ranal _ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/201469227/direct/01/___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] AMSend.sendDone not signalled
Dear all, sorry for multiple posts i did not include the subject in the previous post.I have implemented AMSend.send command in my program. But i see there is no AMSend.sendDone signalled. Can somebody tell me why this is happening?i ran the application in TOSSIM Thanks in advance. Ranal _ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. http://clk.atdmt.com/GBL/go/201469229/direct/01/___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Adding tosthreads support in tossim
Dear all, Is it possible for us to add support for TOSThreads in TOSSIM? If yes can anyone let us know some documentation related to the structure of the TOSSIM implementation so that we have a clear idea what files need to be updated? Thanks in advance ranal _ Hotmail: Powerful Free email with security by Microsoft. http://clk.atdmt.com/GBL/go/201469230/direct/01/___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Unable to receive Serial Message
Hi All, I have made some changes to TestSerial.java to display some messages that I send serially. I am sending messages serially but not able to display it on screen. I have checked my configuration files but everything is fine there. I am attaching the Serial.java, can anyone kindly go through and tell me what is wrong with there? The program is not even printing "Packet rcvd". Thanks in advance,Kartik Serial.java Description: Binary data ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] passing parameters
Dear all, This might sound naive - how to send parameters, say channels, to the motes that are not plugged to the desktop? Would something like the IPBaseStation provided with tinyOS do the job? Many thanks! ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] TinyLD
Hi Ranal, You are right, TinyLD is available on Telosb only, and it doesn't support MicaZ now. Mike On Mar 4, 2010, at 2:37 PM, ranal fernando wrote: > > Dear all, > > As far as i know TinyLD is implemented only in msp430. Do you have an > implementation in atmega(micaz) platform? > > thanks > > > ranal > > > > Hotmail: Trusted email with powerful SPAM protection. Sign up now. > ___ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] AMSend.sendDone not signalled
Hi Ranal, Have you loaded any noise model to your motes ? I had a problem like this ,you should use a noise model and load it in everynode you want to be simulated. Have a look at this : http://docs.tinyos.net/index.php/TOSSIM and read "Configuring a Netwrok". Good luck. Mojtaba Raznahan. www.raznahan.com Computer engineering ,BS TMU university ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] TinyLD
Hi all Can some one tell me how to get the power of the battery and transmit it to base station.Iam using TinyOS1.x and Iris motes Thanking you K.Subaashini ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
