[Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi guys, I am now using telos platform, which is BSN development kit from Imperial College London. This platform has SPI/Uart0 interface and Uart1. Our group are now using this BSN Development Kit to develop our own prototype, which use another platform Platform1 to connect to BSN through Uart1 interface, we build our own CC2420 stack on Platform1 and try to communicate with another BSN node trough CC2420, like the following graph. Telos(BSN) |-| |--| Uart| |---| SPI |---|| | Platform1 |< ---|---> | MSP430| <-->| RF || |--| ||---| BSN Node |---|| |-| Caus we don't have standalone CC2420 module. What telos platform do is to function as Uart-SPI gateway in that we want to utilize the CC2420 module without using CC2420 stack on Telos . On it, we use TinyOS 2.x to program the node, when operating the RF module, we use purely Usart interface to read or write CC2420, like the following interfaces: call Usart.clrTxIntr(); call Usart.tx( ch ); call InterruptFIFOP.clear(); When we try to operate CC2420 on BSN and meanwhile transmit data through Uart, then few problems happen. 1. After SRXON command strobe is sent to CC2420, we continue to try to send data through Uart1, it turn that the data could not be received correctly at BSN side. 2. The same problem would happen after I send STXON command strobe. 3. Since we only trace to the STXON step, we could not guarantee there's no problem for other command strobes, if so, can you guys point them out? Have ever friends encounter this kind of problem? Or do you have any idea about these? Besides, Is there any efficient method to debug BSN development kit, or telos platform? Do we need to buy other ICE tools if we want to debug BSN? Neil ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi guys, I am now using telos platform, which is BSN development kit from Imperial College London. This platform has SPI/Uart0 interface and Uart1. Our group are now using this BSN Development Kit to develop our own prototype, which use another platform Platform1 to connect to BSN through Uart1 interface, we build our own CC2420 stack on Platform1 and try to communicate with another BSN node trough CC2420, like the following graph. Telos(BSN) |-| | |---| SPI |---|| Uart |--| | | RF | <--- | MSP430 |<-|-->|Platfrom1 | ||---| BSN Node|---|| | -| |-| Caus we don't have standalone CC2420 module. What telos platform do is to function as Uart-SPI gateway in that we want to utilize the CC2420 module without using CC2420 stack on Telos . On it, we use TinyOS 2.x to program the node, when operating the RF module, we use purely Usart interface to read or write CC2420, like the following interfaces: call Usart.clrTxIntr(); call Usart.tx( ch ); call InterruptFIFOP.clear(); When we try to operate CC2420 on BSN and meanwhile transmit data through Uart, then few problems happen. 1. After SRXON command strobe is sent to CC2420, we continue to try to send data through Uart1, it turn that the data could not be received correctly at BSN side. 2. The same problem would happen after I send STXON command strobe. 3. Since we only trace to the STXON step, we could not guarantee there's no problem for other command strobes, if so, can you guys point them out? Have ever friends encounter this kind of problem? Or do you have any idea about these? Besides, Is there any efficient method to debug BSN development kit, or telos platform? Do we need to buy other ICE tools if we want to debug BSN? Neil ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi Bill, I saw your reply about UartStream error in the TinyOS mailing list. Impressive! Actually I also encountered the same Uart1 problem in my project. I am now using telos platform, which is BSN development kit from Imperial College London. This platform has SPI/Uart0 interface and Uart1. Our group is now using this BSN Development Kit to develop our own prototype, which use another platform Platform1 to connect to BSN through Uart1 interface, we build our own CC2420 stack on Platform1 and try to communicate with another BSN node trough CC2420, like the following graph. Telos(BSN) |-| | |---| SPI |---|| Uart |--| | | RF | <--- | MSP430 |<-|-->|Platfrom1 | ||---| BSN Node|---|| | -| |-| One thing I may mention is that, I plug the BSN into PC to utilize the USB power supply, but when I use battery , the UART1 could not work at all. I still don't know why. Caus we don't have standalone CC2420 module. What telos platform do is to function as Uart-SPI gateway in that we want to utilize the CC2420 module without using CC2420 stack on Telos . On it, we use TinyOS 2.x to program the node, when operating the RF module, we use purely Usart interface to read or write CC2420, like the following interfaces: call Usart.clrTxIntr(); call Usart.tx( ch ); call InterruptFIFOP.clear(); When we try to operate CC2420 on BSN and meanwhile transmit data through Uart, then few problems happen. 1. After SRXON command strobe is sent to CC2420, we continue to try to send data through Uart1, it turn that the data could not be received correctly at BSN side. But before that command, the Uart1 works quit well. 2. The same problem would happen after I send STXON command strobe. 3. Since we only trace to the STXON step, we could not guarantee there's no problem for other command strobes, if so, can you point them out? Have you ever encountered this kind of problem? Or do you have any idea about these? Besides, Is there any efficient method to debug BSN development kit, or telos platform? Do we need to buy other ICE tools if we want to debug BSN? Best Wishes, Yidong, Neil ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi guys, I am now using telos platform, which is BSN development kit from Imperial College London. This platform has SPI/Uart0 interface and Uart1. Our group are now using this BSN Development Kit to develop our own prototype, which use another platform Platform1 to connect to BSN through Uart1 interface, we build our own CC2420 stack on Platform1 and try to communicate with another BSN node trough CC2420, like the following graph. Telos(BSN) |-| | |---| SPI |---||Uart |--| | | RF | <--- | MSP430 |<-|-->|Platfrom1 | ||---| BSN Node |---|| | -| |-| Caus we don’t have standalone CC2420 module. What telos platform do is to function as Uart-SPI gateway in that we want to utilize the CC2420 module without using CC2420 stack on Telos . On it, we use TinyOS 2.x to program the node, when operating the RF module, we use purely Usart interface to read or write CC2420, like the following interfaces: call Usart.clrTxIntr(); call Usart.tx( ch ); call InterruptFIFOP.clear(); When we try to operate CC2420 on BSN and meanwhile transmit data through Uart, then few problems happen. 1. After SRXON command strobe is sent to CC2420, we continue to try to send data through Uart1, it turn that the data could not be received correctly at BSN side. 2. The same problem would happen after I send STXON command strobe. 3. Since we only trace to the STXON step, we could not guarantee there’s no problem for other command strobes, if so, can you guys point them out? Have ever friends encounter this kind of problem? Or do you have any idea about these? Besides, Is there any efficient method to debug BSN development kit, or telos platform? Do we need to buy other ICE tools if we want to debug BSN? Neil ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi, I am a little confuse, BSN == tmote, isnt it? You are using tmote as your microcontroler to interact with your own CC2420 stack through one msp430 Uart. when you connect bsn to usb, does your application works or you have the same problem? you say that you use UART1 to communicate to platform1, but how do you achive this if UART1 is used by usb? if you are using uart0, we can talk about the issues I mentioned in the previous mail, in particular to your application. Related to debugging I always wanted to use ICE but never bought it. On Thu, Jul 31, 2008 at 5:52 AM, Han Yidong <[EMAIL PROTECTED]> wrote: > Hi Bill, > > > > I saw your reply about UartStream error in the TinyOS mailing list. > Impressive! > > > > Actually I also encountered the same Uart1 problem in my project. I am now > using telos platform, which is BSN development kit from Imperial College > London. > > > > This platform has SPI/Uart0 interface and Uart1. Our group is now using > this BSN Development Kit to develop our own prototype, which use *another > platform Platform1 to connect to BSN through Uart1 interface*, we build > our own CC2420 stack on Platform1 and try to communicate with another BSN > node trough CC2420, like the following graph. > > > >Telos(BSN) > > |-| > > | |---| SPI |---|| > Uart |--| > > | | RF | <--- | MSP430 > |<-|-->|Platfrom1 | > > ||---| BSN Node|---| > | | -| > > |-| > > > > *One thing I may mention is that, I plug the BSN into PC to utilize the > USB power supply, but when I use battery , the UART1 could not work at all. > I still don't know why.* > > > > Caus we don't have standalone CC2420 module*. What telos platform do is to > function as Uart-SPI gateway in that we want to utilize the CC2420 module > without using CC2420 stack on Telos .* On it, we use TinyOS 2.x to program > the node, when operating the RF module, we use purely Usart interface to > read or write CC2420, like the following interfaces: > > > > call Usart.clrTxIntr(); > > call Usart.tx( ch ); > > call InterruptFIFOP.clear(); > > > > > > > > When we try to operate CC2420 on BSN and meanwhile transmit data through > Uart, then few problems happen. > > > > *1. **After SRXON command strobe is sent to CC2420, we continue to > try to send data through Uart1, it turn that the data could not be received > correctly at BSN side. But before that command, the Uart1 works quit well. > * > > 2. The same problem would happen after I send STXON command strobe. > > 3. Since we only trace to the STXON step, we could not guarantee > there's no problem for other command strobes, if so, can you point them out? > > > > *Have you ever encountered this kind of problem? Or do you have any idea > about these? * > > * * > > *Besides, Is there any efficient method to debug BSN development kit, or > telos platform? Do we need to buy other ICE tools if we want to debug BSN? > * > > > > Best Wishes, > > Yidong, Neil > ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Uart and CC2420 module conflict on telos Platform?
Hi, Thanks a lot for your answer. You got the problem I encountered. And BSN should belong to telosa platform. I use this platform makefile to compile. Cauz BSN provide a extension board, which has Uart1tx and Uart1rx pins. So I could use its Uart1 interface, beside the USB programming function of Uart1. When I program the BSN node by USB, the BSN will be reset, afterwards, Uart1 could be controlled by the application. Pity thing is, for our CC2420 stack, it could only run on Platform1, and no way to run on PC to test. But Uart1 works quit well before that CC2420 command being executed. This problem really got me frustrated, haha… Thanks again^_^ Best Wishes, Yidong, Neil From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Guillermo De Cesco Sent: 2008年7月31日 21:13 To: Han Yidong Cc: tinyos-help@millennium.berkeley.edu Subject: Re: [Tinyos-help] Uart and CC2420 module conflict on telos Platform? Hi, I am a little confuse, BSN == tmote, isnt it? You are using tmote as your microcontroler to interact with your own CC2420 stack through one msp430 Uart. when you connect bsn to usb, does your application works or you have the same problem? you say that you use UART1 to communicate to platform1, but how do you achive this if UART1 is used by usb? if you are using uart0, we can talk about the issues I mentioned in the previous mail, in particular to your application. Related to debugging I always wanted to use ICE but never bought it. On Thu, Jul 31, 2008 at 5:52 AM, Han Yidong <[EMAIL PROTECTED]> wrote: Hi Bill, I saw your reply about UartStream error in the TinyOS mailing list. Impressive! Actually I also encountered the same Uart1 problem in my project. I am now using telos platform, which is BSN development kit from Imperial College London. This platform has SPI/Uart0 interface and Uart1. Our group is now using this BSN Development Kit to develop our own prototype, which use another platform Platform1 to connect to BSN through Uart1 interface, we build our own CC2420 stack on Platform1 and try to communicate with another BSN node trough CC2420, like the following graph. Telos(BSN) |-| | |---| SPI |---||Uart |--| | | RF | <--- | MSP430 |<-|-->|Platfrom1 | ||---| BSN Node|---|| | -| |-| One thing I may mention is that, I plug the BSN into PC to utilize the USB power supply, but when I use battery , the UART1 could not work at all. I still don't know why. Caus we don't have standalone CC2420 module. What telos platform do is to function as Uart-SPI gateway in that we want to utilize the CC2420 module without using CC2420 stack on Telos . On it, we use TinyOS 2.x to program the node, when operating the RF module, we use purely Usart interface to read or write CC2420, like the following interfaces: call Usart.clrTxIntr(); call Usart.tx( ch ); call InterruptFIFOP.clear(); When we try to operate CC2420 on BSN and meanwhile transmit data through Uart, then few problems happen. 1. After SRXON command strobe is sent to CC2420, we continue to try to send data through Uart1, it turn that the data could not be received correctly at BSN side. But before that command, the Uart1 works quit well. 2. The same problem would happen after I send STXON command strobe. 3. Since we only trace to the STXON step, we could not guarantee there's no problem for other command strobes, if so, can you point them out? Have you ever encountered this kind of problem? Or do you have any idea about these? Besides, Is there any efficient method to debug BSN development kit, or telos platform? Do we need to buy other ICE tools if we want to debug BSN? Best Wishes, Yidong, Neil ___ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
