Re: [Tinyos-help] error Direct Parallel Access not defined
Here is what I do on my WindowsXP machine running cygwin I have the board plugged into com1: TinyDB- Compiling and installing TinyDB on each mote cd /opt/tinyos-1.x/apps/TinyDBApp make mica2 install.0 mib510,/dev/ttyS0 Compiles custom version of TinyDB for node0 and installs the firmware onto the mote - Original Message - From: Tehn Yit Chin [EMAIL PROTECTED] To: zhiqiang zhang [EMAIL PROTECTED] Cc: tinyos-help@Millennium.Berkeley.EDU Sent: Sunday, July 02, 2006 9:54 PM Subject: Re: [Tinyos-help] error Direct Parallel Access not defined Sorry, I thought you were on linux. On cygwin, just replace /dev/ttyS0 with the name of your comport, which might be com1. On my cygwin setup, all i do is the following the results... $ make mica2 reinstall.0 MIB510=com1 installing mica2 binary set-mote-id build/mica2/main.srec build/mica2/main.srec.0.out `echo reinstall.0 |perl -pe 's/^reinstall.//; $_=hex if /^0x/i;'` uisp -dprog=mib510 -dserial=com1 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/mica2/main.srec.0.out Firmware Version: 2.1 Atmel AVR ATmega128 is found. Uploading: flash Fuse Extended Byte set to 0xff cheers, Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. zhiqiang zhang wrote: hi guys: I attached the command and message below : *$ make micaz reinstall.0 MIB510=/dev/ttyS0* * set-mote-id build/micaz/main.srec build/micaz/main.srec.out-0 0 Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring symbol. installing micaz binary with dapa isp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase /dev/parport0: No such file or directory Failed to open ppdev. make: *** [program] Error 2* ** i am using serial port,but it seems like using parallel port .i don't know how to solve this problem. By thy way ,you said there should be a symbol link between /dev/ttyS0 and /dev/parport0 ,how to do this? because i even can't find /dev ( i am using cygwin). regards zhiqiang ** * * On 03/07/06, Tehn Yit Chin [EMAIL PROTECTED] wrote: There probably isn't a /dev/parport0 available? Why are you using the parallel port? Is there symbolic link between /dev/ttyS0 and /dev/parport0? What happens when you try make mica2 reninstall.1 mib510=/dev/ttyS0 Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. zhiqiang zhang wrote: hi,guys: I met the same question with campbell gao. Now i try the command make mica2 reinstall,1 mib510,/dev/ttyS0,then i met another error. */dev/parport0:no such file or directory , Failed to open ppdev.* Do you know how to solve it ? zhiqiang * * On 03/07/06, Tehn Yit Chin [EMAIL PROTECTED] wrote: campbell gao wrote: hi all when i type make mica2 reinstall,1 mib510,COM1 or make mica2 reinstall,1 mib510,/dev/ttyS0 I get the error Direct Parallel Access not defined. why ,anyone know it ?? I believe that the syntax is make mica2 reinstall.0 MIB510=COM1 or make mica2 reinstall.0 MIB510=/dev/ttyS0 Don't use any commas. Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] error Direct Parallel Access not defined
hi all when i type make mica2 reinstall,1 mib510,COM1 ormake mica2 reinstall,1 mib510,/dev/ttyS0I get the error Direct Parallel Access not defined. why ,anyone know it ??-- 祝好,此致敬礼高学彬(campbell)SNARC Sensor Networks and Application Research Centerhttp://snarc.gucas.ac.cn/index.htmOur Mission To be one of the best groups in the area of sensor networks research , by successful completion of key projects, publishing high quality papers and transferring technologies and know-how to industries ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] error Direct Parallel Access not defined
Sorry, I thought you were on linux. On cygwin, just replace /dev/ttyS0 with the name of your comport, which might be com1. On my cygwin setup, all i do is the following the results... $ make mica2 reinstall.0 MIB510=com1 installing mica2 binary set-mote-id build/mica2/main.srec build/mica2/main.srec.0.out `echo reinstall.0 |perl -pe 's/^reinstall.//; $_=hex if /^0x/i;'` uisp -dprog=mib510 -dserial=com1 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/mica2/main.srec.0.out Firmware Version: 2.1 Atmel AVR ATmega128 is found. Uploading: flash Fuse Extended Byte set to 0xff cheers, Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. zhiqiang zhang wrote: hi guys: I attached the command and message below : *$ make micaz reinstall.0 MIB510=/dev/ttyS0* * set-mote-id build/micaz/main.srec build/micaz/main.srec.out-0 0 Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring symbol. installing micaz binary with dapa uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase /dev/parport0: No such file or directory Failed to open ppdev. make: *** [program] Error 2* ** i am using serial port,but it seems like using parallel port .i don't know how to solve this problem. By thy way ,you said there should be a symbol link between /dev/ttyS0 and /dev/parport0 ,how to do this? because i even can't find /dev ( i am using cygwin). regards zhiqiang ** * * On 03/07/06, Tehn Yit Chin [EMAIL PROTECTED] wrote: There probably isn't a /dev/parport0 available? Why are you using the parallel port? Is there symbolic link between /dev/ttyS0 and /dev/parport0? What happens when you try make mica2 reninstall.1 mib510=/dev/ttyS0 Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. zhiqiang zhang wrote: hi,guys: I met the same question with campbell gao. Now i try the command make mica2 reinstall,1 mib510,/dev/ttyS0,then i met another error. */dev/parport0:no such file or directory , Failed to open ppdev.* Do you know how to solve it ? zhiqiang * * On 03/07/06, Tehn Yit Chin [EMAIL PROTECTED] wrote: campbell gao wrote: hi all when i type make mica2 reinstall,1 mib510,COM1 or make mica2 reinstall,1 mib510,/dev/ttyS0 I get the error Direct Parallel Access not defined. why ,anyone know it ?? I believe that the syntax is make mica2 reinstall.0 MIB510=COM1 or make mica2 reinstall.0 MIB510=/dev/ttyS0 Don't use any commas. Tehn Yit Chin Embedded System Engineer, Grey Innovation Pty. Ltd. ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help