[Touch-packages] [Bug 1897932] Re: systemd-repart not packaged
** Changed in: systemd (Debian) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1897932 Title: systemd-repart not packaged Status in systemd package in Ubuntu: Confirmed Status in systemd package in Debian: Fix Released Bug description: systemd-repart is not (as of 246.6-1ubuntu1) packaged in the Ubuntu/Debian packages of systemd - probably because it has an extra dependency? I'd like to use it in our new raspberry pi images where we don't have cloud-init installed. We're already using systemd-growfs, but we are missing the nice partition resizing part (so are using cloud- initramfs-growroot). Could you please consider enabling it? In another binary package - so it can have extra deps - would be just fine by me. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1897932/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957781] Re: when i upgrade my package ask me yes or no ?
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Information type changed from Private Security to Public ** Package changed: ubuntu => apt (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1957781 Title: when i upgrade my package ask me yes or no ? Status in apt package in Ubuntu: New Bug description: ubuntu 21.10 use sudo apt upgrade toshiba@toshiba-Satellite-C850-B908:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: linux-headers-5.13.0-25 linux-headers-5.13.0-25-generic linux-image-5.13.0-25-generic linux-modules-5.13.0-25-generic linux-modules-extra-5.13.0-25-generic The following packages will be upgraded: ghostscript ghostscript-x gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 libexiv2-27 libfprint-2-2 libgs9 libgs9-common libjavascriptcoregtk-4.0-18 libnss-systemd libpam-systemd libqt5core5a libqt5dbus5 libqt5gui5 libqt5network5 libqt5widgets5 libsystemd0 libudev1 libwebkit2gtk-4.0-37 linux-generic-hwe-20.04 linux-headers-generic-hwe-20.04 linux-image-generic-hwe-20.04 linux-libc-dev openssh-client qt5-gtk-platformtheme systemd systemd-sysv systemd-timesyncd udev 29 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. 27 standard security updates Need to get 148 MB of archives. After this operation, 504 MB of additional disk space will be used. Do you want to continue? [Y/n] 1 Get:1 http://sy.archive.ubuntu.com/ubuntu impish-updates/main amd64 systemd-timesyncd amd64 248.3-1ubuntu8.2 [30.8 kB] -- so i click 1 not y or yes ? and the upgrading begin? is that normal ? i mean using 1 as yes? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1957781/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957781] [NEW] when i upgrade my package ask me yes or no ?
You have been subscribed to a public bug: ubuntu 21.10 use sudo apt upgrade toshiba@toshiba-Satellite-C850-B908:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: linux-headers-5.13.0-25 linux-headers-5.13.0-25-generic linux-image-5.13.0-25-generic linux-modules-5.13.0-25-generic linux-modules-extra-5.13.0-25-generic The following packages will be upgraded: ghostscript ghostscript-x gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 libexiv2-27 libfprint-2-2 libgs9 libgs9-common libjavascriptcoregtk-4.0-18 libnss-systemd libpam-systemd libqt5core5a libqt5dbus5 libqt5gui5 libqt5network5 libqt5widgets5 libsystemd0 libudev1 libwebkit2gtk-4.0-37 linux-generic-hwe-20.04 linux-headers-generic-hwe-20.04 linux-image-generic-hwe-20.04 linux-libc-dev openssh-client qt5-gtk-platformtheme systemd systemd-sysv systemd-timesyncd udev 29 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. 27 standard security updates Need to get 148 MB of archives. After this operation, 504 MB of additional disk space will be used. Do you want to continue? [Y/n] 1 Get:1 http://sy.archive.ubuntu.com/ubuntu impish-updates/main amd64 systemd-timesyncd amd64 248.3-1ubuntu8.2 [30.8 kB] -- so i click 1 not y or yes ? and the upgrading begin? is that normal ? i mean using 1 as yes? ** Affects: apt (Ubuntu) Importance: Undecided Status: New -- when i upgrade my package ask me yes or no ? https://bugs.launchpad.net/bugs/1957781 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1953521] Re: fixrtc produces extraneous (confusing) output
Somebody uploaded this and neglected to unsubscribe the sponsors team, I'm doing that now. ** Changed in: initramfs-tools (Ubuntu) Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1953521 Title: fixrtc produces extraneous (confusing) output Status in initramfs-tools package in Ubuntu: Fix Committed Bug description: The premount script for fixrtc produces a couple of lines of extraneous (and slightly confusing) output. While this is irrelevant for most platforms, on the pi images (which use fixrtc owing to the lack of an RTC on the board), it means that "ext4" and "Thu Jan 1 00:00:10 UTC 1970" are the first console output on every boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1953521/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 989961] Re: Provide a gmake symlink
It isn't easy to extract the debdiff from your PPA currently as make- dfsg has a new version available and the current diff produced by your PPA only has debian/changelog changes. Could you please attach a new debdiff to this bug report and subscribe the Ubuntu Sponsors team after that is done? Thanks in advance. ** Changed in: make-dfsg (Ubuntu) Status: Triaged => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to make-dfsg in Ubuntu. https://bugs.launchpad.net/bugs/989961 Title: Provide a gmake symlink Status in make-dfsg package in Ubuntu: Incomplete Bug description: Some, albeit older or proprietary software, expects a gmake symlink for gnu make. Can this be provided? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/make-dfsg/+bug/989961/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1867204] Re: /usr/share/apport/whoopsie-upload-all:FileNotFoundError:/usr/share/apport/whoopsie-upload-all@170:collect_info:process_report
** Changed in: apport (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1867204 Title: /usr/share/apport/whoopsie-upload- all:FileNotFoundError:/usr/share/apport/whoopsie-upload- all@170:collect_info:process_report Status in apport package in Ubuntu: New Status in apport source package in Focal: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with package version 2.20.11-0ubuntu19, the problem page at https://errors.ubuntu.com/problem/7a3912ff155870bdb23500abfa48a21a6cb07171 contains more details, including versions of packages affected, stacktrace or traceback, and individual crash reports. If you do not have access to the Ubuntu Error Tracker and are a software developer, you can request it at http://forms.canonical.com/reports/. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1867204/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1939616] Re: u-r-u should leave a breadcrumb indicating a dist-upgrade is in progress
** Changed in: ubuntu-release-upgrader (Ubuntu) Importance: Undecided => Medium ** Changed in: apport (Ubuntu) Importance: Undecided => Medium ** Changed in: update-notifier (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1939616 Title: u-r-u should leave a breadcrumb indicating a dist-upgrade is in progress Status in apport package in Ubuntu: New Status in ubuntu-release-upgrader package in Ubuntu: New Status in update-notifier package in Ubuntu: New Status in apport source package in Impish: New Status in ubuntu-release-upgrader source package in Impish: New Status in update-notifier source package in Impish: New Bug description: Looking at the source code of ubuntu-release-upgrader it looks like an environment variable, RELEASE_UPGRADE_IN_PROGRESS, is set when an upgrade is being performed. However, it would be better if there was an indication that other programs, e.g. apport, could use to tell whether or not a release upgrade was in progress. This came up as we saw some crash reports in the error tracker that didn't make sense and a possible explanation is that a release upgrade was in progress. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1939616/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957199] Re: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4
I'm afraid I can't walk you through resolving a broken upgrade in a bug report, it's just not the best medium for the job. Nor can I see a troubleshooting guide that I can recommend. The process is that you need to complete the apt upgrade. Usually this involves something like: # dpkg --configure -a # apt-get -f install # apt-get upgrade # apt-get dist-upgrade And fix any issues a long the way, until you can get things to complete. In the example above, removing or upgrading eric would probably allow python 3.8 to configure. If you're out of your depth, I'd recommend taking a backup and re- installing. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python3-defaults in Ubuntu. https://bugs.launchpad.net/bugs/1957199 Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 Status in eric package in Ubuntu: New Status in python3-defaults package in Ubuntu: New Bug description: failure when trying to upgrade to Ubuntu 20 ProblemType: Package DistroRelease: Ubuntu 20.04 Package: python3 3.8.2-0ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-166.174-generic 4.15.18 Uname: Linux 4.15.0-166-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip Date: Wed Jan 12 11:28:01 2022 ErrorMessage: installed python3 package post-installation script subprocess returned error exit status 4 InstallationDate: Installed on 2015-08-26 (2330 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) Python3Details: /usr/bin/python3.8, Python 3.8.10, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4 RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.6 SourcePackage: python3-defaults Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 UpgradeStatus: Upgraded to focal on 2022-01-12 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eric/+bug/1957199/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585084] Re: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner)
This bug is still valid even in Ubuntu 20.10, but a little different. In my case a popup appears randomly that says something like mic muted / mic unmuted. My solution on any distro starting from Ubuntu 20.04: sudo sed -e '/f20/ s/^#*/#/' -i /lib/udev/hwdb.d/60-keyboard.hwdb sudo systemd-hwdb update In my case it happens in Ideapad 700 15-ISK I have no idea how to report the bug as every time it happens I apply that patch and that's it If this is not the place for this message, please feel free to delete it or ask me to delete it. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1585084 Title: Volume notification keeps popping up constantly (the notify-OSD bubble on top-right corner) Status in pulseaudio package in Ubuntu: Confirmed Bug description: I upgraded to Ubuntu 16.04 yesterday, I did a clean install while preserving the home directory which is mounted in a separate partition. Even during the installation I had constant volume notification bubble appearing on the top-right corner of my screen, it would come and go about twice every minute. I just thought it was due to installing hardware drivers or something but the problem persisted even when I booted into the freshly installed system. I did some searching and two users reported the exact problem. And one more suggested this happens because constant disconnect and reconnect of the sound card which makes sense as the sound settings flashes briefly during every popup. Someone on IRC suggested to kill pulseaudio and thus restart it, that does not fix the issue. I also tried the Live environment thinking it might be due to some old config files in home partition (which was preserved during upgrade), but this problem happens in the live environment as well, which makes sense because it was present during installation as well. Users with the same issue: http://ubuntuforums.org/showthread.php?t=2323815 http://askubuntu.com/questions/773008/constant-volume-osd-in-16-04 http://askubuntu.com/questions/767466/sound-card-being-disconnected-reconnected-constantly Thanks. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: pulseaudio 1:8.0-0ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: sidd 1651 F pulseaudio /dev/snd/controlC0: sidd 1651 F pulseaudio /dev/snd/controlC1: sidd 1651 F pulseaudio CurrentDesktop: Unity Date: Tue May 24 12:31:12 2016 InstallationDate: Installed on 2016-05-23 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/23/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0705 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A97 EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0705:bd08/23/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnM5A97EVO:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957839] [NEW] package libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 failed to install/upgrade: Versuch, »/usr/lib/x86_64-linux-gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschre
Public bug reported: when merging mp4 files recorded by android phone, the mp4 joiner app crashes ProblemType: Package DistroRelease: Ubuntu 21.10 Package: libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-24.24-generic 5.13.19 Uname: Linux 5.13.0-24-generic x86_64 ApportVersion: 2.20.11-0ubuntu71 AptOrdering: libgstreamer-plugins-bad1.0-0:amd64: Install libgstreamer-plugins-good1.0-0:amd64: Install NULL: ConfigurePending Architecture: amd64 CasperMD5CheckResult: unknown Date: Sun Jan 9 13:28:34 2022 ErrorMessage: Versuch, »/usr/lib/x86_64-linux-gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschreiben, welches auch in Paket libgstreamer-plugins-bad1.0-0:amd64 1:1.18.4-dmo4 ist InstallationDate: Installed on 2021-06-10 (217 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.9, Python 3.9.7, python3-minimal, 3.9.4-1ubuntu1 PythonDetails: N/A RelatedPackageVersions: dpkg 1.20.9ubuntu2.1 apt 2.3.9 SourcePackage: gst-plugins-good1.0 Title: package libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 failed to install/upgrade: Versuch, »/usr/lib/x86_64-linux-gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschreiben, welches auch in Paket libgstreamer-plugins-bad1.0-0:amd64 1:1.18.4-dmo4 ist UpgradeStatus: Upgraded to impish on 2021-06-20 (207 days ago) ** Affects: gst-plugins-good1.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package impish -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gst-plugins-good1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1957839 Title: package libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 failed to install/upgrade: Versuch, »/usr/lib/x86_64-linux- gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschreiben, welches auch in Paket libgstreamer-plugins-bad1.0-0:amd64 1:1.18.4-dmo4 ist Status in gst-plugins-good1.0 package in Ubuntu: New Bug description: when merging mp4 files recorded by android phone, the mp4 joiner app crashes ProblemType: Package DistroRelease: Ubuntu 21.10 Package: libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 ProcVersionSignature: Ubuntu 5.13.0-24.24-generic 5.13.19 Uname: Linux 5.13.0-24-generic x86_64 ApportVersion: 2.20.11-0ubuntu71 AptOrdering: libgstreamer-plugins-bad1.0-0:amd64: Install libgstreamer-plugins-good1.0-0:amd64: Install NULL: ConfigurePending Architecture: amd64 CasperMD5CheckResult: unknown Date: Sun Jan 9 13:28:34 2022 ErrorMessage: Versuch, »/usr/lib/x86_64-linux-gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschreiben, welches auch in Paket libgstreamer-plugins-bad1.0-0:amd64 1:1.18.4-dmo4 ist InstallationDate: Installed on 2021-06-10 (217 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.9, Python 3.9.7, python3-minimal, 3.9.4-1ubuntu1 PythonDetails: N/A RelatedPackageVersions: dpkg 1.20.9ubuntu2.1 apt 2.3.9 SourcePackage: gst-plugins-good1.0 Title: package libgstreamer-plugins-good1.0-0 1.18.5-1ubuntu2 failed to install/upgrade: Versuch, »/usr/lib/x86_64-linux-gnu/libgstbasecamerabinsrc-1.0.so.0« zu überschreiben, welches auch in Paket libgstreamer-plugins-bad1.0-0:amd64 1:1.18.4-dmo4 ist UpgradeStatus: Upgraded to impish on 2021-06-20 (207 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gst-plugins-good1.0/+bug/1957839/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 574287] Re: tasksel: forcefully removes packages when tasks overlap
** Tags added: rls-jj-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/574287 Title: tasksel: forcefully removes packages when tasks overlap Status in apt package in Ubuntu: Invalid Status in tasksel package in Ubuntu: Confirmed Status in tasksel package in Debian: Fix Released Bug description: TEST CASE 1. Boot Lucid LiveCD 2. run "sudo tasksel" and select "virtual machine host" 3. run "sudo tasksel" and deselect "virtual machine host" 4. watch how tasksel uninstalls your system OBSERVATIONS What seems to happen is that apt vengefully removes ALL of the items associated with one task, including several base dependencies of other tasks (e.g. ubuntu-desktop) One illustrative example is the openssh-server task: This one includes the packages openssh-server, tcpd and libwrap0. From a normal ubuntu-desktop (e.g. ~liveCD) both tcpd and libwrap0 are already installed, and the task-install pulls in only openssh-server. However when the task is removed, all these three packages (openssh-server, tcpd and libwrap0) are forcefully removed. Since libwrap0 is a core dependency of gnome, a large part of gnome will be removed alongside the removal of the task. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/574287/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1954649] Re: autopkgtest regressions with python3.10 as supported
** Changed in: supysonic (Debian) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python3-defaults in Ubuntu. https://bugs.launchpad.net/bugs/1954649 Title: autopkgtest regressions with python3.10 as supported Status in ipywidgets package in Ubuntu: New Status in pygobject package in Ubuntu: Fix Released Status in pytest-twisted package in Ubuntu: New Status in python-b2sdk package in Ubuntu: New Status in python-hypothesis package in Ubuntu: New Status in python-taskflow package in Ubuntu: Fix Released Status in python3-defaults package in Ubuntu: New Status in skimage package in Ubuntu: Invalid Status in supysonic package in Ubuntu: New Status in vorta package in Ubuntu: New Status in ipywidgets package in Debian: New Status in pygobject package in Debian: Fix Released Status in pytest-twisted package in Debian: New Status in python-b2sdk package in Debian: New Status in python-hypothesis package in Debian: New Status in supysonic package in Debian: Confirmed Status in vorta package in Debian: Confirmed Bug description: This bug is for tracking the packages having autopkgtest regressions with python3.10 as a supported version, blocking migration of python3-defaults/3.9.7-4. All packages are in universe except pygobject and python-taskflow in main. All packages have RC bugs in Debian except python-taskflow which is based on a newer upstream version. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ipywidgets/+bug/1954649/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1957199] Re: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4
Thank you for this information about Eric. Unfortunately that is not my only problem. During the build I also got the message "nvidia-340 package post-installation script subprocess returned error exit status 10" and notification that my system was unstable. The resulting system was unable to display the background image and substituted pixel noise. I next got a message that updates were available so I attempted to run the software updates. This again appeared to fail for nvidia-340. I next got a message that a restart was needed to complete the updates, so I restarted the machine. But on trying to restart, after Ubuntu is displayed, I get a stream of text followed by a blank screen. I am completely out of my depth here. Can you advise me on how to report this problem and hopefully how to restore my system? Thanks Steve Harrington -Original Message- From: nore...@launchpad.net [mailto:nore...@launchpad.net] On Behalf Of Stefano Rivera Sent: Wednesday, January 12, 2022 6:49 PM To: steven_harring...@rochester.rr.com Subject: [Bug 1957199] Re: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 eric should have been upgraded before python3.8 configured The old eric was not compatible with python3.8. Either way, the failed byte-compilation of that file shouldn't have crashed the postinst. -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1957199 Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 Status in eric package in Ubuntu: New Status in python3-defaults package in Ubuntu: New Bug description: failure when trying to upgrade to Ubuntu 20 ProblemType: Package DistroRelease: Ubuntu 20.04 Package: python3 3.8.2-0ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-166.174-generic 4.15.18 Uname: Linux 4.15.0-166-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip Date: Wed Jan 12 11:28:01 2022 ErrorMessage: installed python3 package post-installation script subprocess returned error exit status 4 InstallationDate: Installed on 2015-08-26 (2330 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) Python3Details: /usr/bin/python3.8, Python 3.8.10, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4 RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.6 SourcePackage: python3-defaults Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 UpgradeStatus: Upgraded to focal on 2022-01-12 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eric/+bug/1957199/+subscriptions -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python3-defaults in Ubuntu. https://bugs.launchpad.net/bugs/1957199 Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 Status in eric package in Ubuntu: New Status in python3-defaults package in Ubuntu: New Bug description: failure when trying to upgrade to Ubuntu 20 ProblemType: Package DistroRelease: Ubuntu 20.04 Package: python3 3.8.2-0ubuntu2 ProcVersionSignature: Ubuntu 4.15.0-166.174-generic 4.15.18 Uname: Linux 4.15.0-166-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip Date: Wed Jan 12 11:28:01 2022 ErrorMessage: installed python3 package post-installation script subprocess returned error exit status 4 InstallationDate: Installed on 2015-08-26 (2330 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) Python3Details: /usr/bin/python3.8, Python 3.8.10, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4 RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.6 SourcePackage: python3-defaults Title: package python3 3.8.2-0ubuntu2 failed to install/upgrade: installed python3 package post-installation script subprocess returned error exit status 4 UpgradeStatus: Upgraded to focal on 2022-01-12 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eric/+bug/1957199/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/List
[Touch-packages] [Bug 1957816] Re: Wayland dual monitor 60Hz: High pitch audio
** Package changed: ubuntu => xorg (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1957816 Title: Wayland dual monitor 60Hz: High pitch audio Status in xorg package in Ubuntu: New Bug description: I have a desktop computer with a 60Hz 4K display connected through Display Port. The display is a ThinkVision X1 with built in audio. With the Display Port cable I am then able to output sound from the monitor and this works without any issues. I have now added a 4K Samsung television through HDMI to the same GPU, which also allows me to do 4K at 60Hz, albeit only with Wayland. In Xorg I can only do 30Hz on the television while doing 60Hz on the ThinkVision X1. It is clear however, that when it is set to 60Hz in Wayland, the animation on the television is much more smooth. The problem is that whenever I set the television to 60Hz, the playback of any sound is both high pitched and faster than normal. If I play a video in YouTube, the video appears to playback about twice as fast as normal and and very high pitched sound (everyone sounds like chipmunks). This is the case on the entire system (also when playing the video or any other sounds on the X1 display at 60Hz). Only if I set the refresh rate, on the television, to 30Hz again does everything play and sound normal again. It is only the playback of media that is doubled in speed. Everything else (animations, mouse, etc.) is still behaving as normal. If I change audio output to the ThinkVision X1 (or something else) at 60Hz while also being connected to the television at 60Hz, the audio stays high pitched and sped up. If I unplug the main display, ThinkVision X1, then the playback of media on the television becomes normal. I have tried with different +100 USD HDMI cables, that are all rated as HDMI 2.0 and the behavior stays the same. My system is Ubuntu 20.04 LTS. I tried in a LiveUSB 21.10, but the behavior was the same. I have an AMD Radeon VII GPU (Has 3x Display Port and 1x HDMI). As mentioned I cannot test it in Xorg, but that is only because it does not allow me to set the refresh rate to 60Hz. I am uncertain whether this is related to MESA, Pulseaudio or maybe Mutter/Wayland? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1957816/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957816] [NEW] Wayland dual monitor 60Hz: High pitch audio
You have been subscribed to a public bug: I have a desktop computer with a 60Hz 4K display connected through Display Port. The display is a ThinkVision X1 with built in audio. With the Display Port cable I am then able to output sound from the monitor and this works without any issues. I have now added a 4K Samsung television through HDMI to the same GPU, which also allows me to do 4K at 60Hz, albeit only with Wayland. In Xorg I can only do 30Hz on the television while doing 60Hz on the ThinkVision X1. It is clear however, that when it is set to 60Hz in Wayland, the animation on the television is much more smooth. The problem is that whenever I set the television to 60Hz, the playback of any sound is both high pitched and faster than normal. If I play a video in YouTube, the video appears to playback about twice as fast as normal and and very high pitched sound (everyone sounds like chipmunks). This is the case on the entire system (also when playing the video or any other sounds on the X1 display at 60Hz). Only if I set the refresh rate, on the television, to 30Hz again does everything play and sound normal again. It is only the playback of media that is doubled in speed. Everything else (animations, mouse, etc.) is still behaving as normal. If I change audio output to the ThinkVision X1 (or something else) at 60Hz while also being connected to the television at 60Hz, the audio stays high pitched and sped up. If I unplug the main display, ThinkVision X1, then the playback of media on the television becomes normal. I have tried with different +100 USD HDMI cables, that are all rated as HDMI 2.0 and the behavior stays the same. My system is Ubuntu 20.04 LTS. I tried in a LiveUSB 21.10, but the behavior was the same. I have an AMD Radeon VII GPU (Has 3x Display Port and 1x HDMI). As mentioned I cannot test it in Xorg, but that is only because it does not allow me to set the refresh rate to 60Hz. I am uncertain whether this is related to MESA, Pulseaudio or maybe Mutter/Wayland? ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: audio bot-comment hdmi wayland -- Wayland dual monitor 60Hz: High pitch audio https://bugs.launchpad.net/bugs/1957816 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1955489] Re: Patch to polkit policy breaks automatic/unattended updates
This probably should be reassigned to the kde settings package. The way we approach upgrades in *Ubuntu is that they are done online and attended, except for security updates, which are installed automatically by unattended-upgrades. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to packagekit in Ubuntu. https://bugs.launchpad.net/bugs/1955489 Title: Patch to polkit policy breaks automatic/unattended updates Status in packagekit package in Ubuntu: New Bug description: In Kubuntu KDE system settings, there is an option to enable automatic updates. However I wondered why this never actually updated the system, despite that I had automatic updates enabled for some time. Turns out, KDE uses Discover to update the system unattended. And discover uses packagekit to trigger offline updates. Now here is the problem: Usually this would work. It does on other distros which don't patch the polkit policy. But not on (K)ubuntu. In the package sources there is a patch for the debian/ubuntu package: /debian/patches/policy.diff This patch does change the permission to do offline updates from all active users to only admins. Here: ``` @@ -273,7 +271,7 @@ Trigger offline updates @@ -282,7 +280,7 @@ auth_admin auth_admin - yes + auth_admin_keep ``` With this patch, it prompts the user for a password before allowing offline updates. Now in unattended update mode, this prompt is hidden. So basically with that patch, unattended updates on Kubuntu just fail silently. Removing this patch (or at least reverting the change in this "org.freedesktop.packagekit.trigger-offline-update" action) makes auto updates work again. Please remove this change from the patch (or even the whole patch? this was last modified in 2012, so should be reviewed if still needed). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/packagekit/+bug/1955489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957819] [NEW] Wayland dual monitor 60Hz: High pitch audio and fast playback
Public bug reported: I described the issue here first: https://bugs.launchpad.net/ubuntu/+bug/1957816 I am not sure it belongs here, but after the initial report i made an audio issue report with `ubuntu-bug -s audio` copy/paste: I have a desktop computer with a 60Hz 4K display connected through Display Port. The display is a ThinkVision X1 with built in audio. With the Display Port cable I am then able to output sound from the monitor and this works without any issues. I have now added a 4K Samsung television through HDMI to the same GPU, which also allows me to do 4K at 60Hz, albeit only with Wayland. In Xorg I can only do 30Hz on the television while doing 60Hz on the ThinkVision X1. It is clear however, that when it is set to 60Hz in Wayland, the animation on the television is much more smooth. The problem is that whenever I set the television to 60Hz, the playback of any sound is both high pitched and faster than normal. If I play a video in YouTube, the video appears to playback about twice as fast as normal and and very high pitched sound (everyone sounds like chipmunks). This is the case on the entire system (also when playing the video or any other sounds on the X1 display at 60Hz). Only if I set the refresh rate, on the television, to 30Hz again does everything play and sound normal again. It is only the playback of media that is doubled in speed. Everything else (animations, mouse, etc.) is still behaving as normal. If I change audio output to the ThinkVision X1 (or something else) at 60Hz while also being connected to the television at 60Hz, the audio stays high pitched and sped up. If I unplug the main display, ThinkVision X1, then the playback of media on the television becomes normal. I have tried with different +100 USD HDMI cables, that are all rated as HDMI 2.0 and the behavior stays the same. My system is Ubuntu 20.04 LTS. I tried in a LiveUSB 21.10, but the behavior was the same. I have an AMD Radeon VII GPU (Has 3x Display Port and 1x HDMI). As mentioned I cannot test it in Xorg, but that is only because it does not allow me to set the refresh rate to 60Hz. I am uncertain whether this is related to MESA, Pulseaudio or maybe Mutter/Wayland? ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 5.13.0-25.26~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-25-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Thu Jan 13 17:24:02 2022 InstallationDate: Installed on 2020-05-03 (620 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:HDMI successful Symptom_Card: Vega 20 HDMI Audio [Radeon VII] - HDA ATI HDMI Symptom_Jack: Digital Out, HDMI Symptom_PulsePlaybackTest: PulseAudio playback test successful Symptom_Type: None of the above Title: [System Product Name, ATI R6xx HDMI, Digital Out, HDMI] Playback problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/15/2021 dmi.bios.release: 5.13 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 8101 dmi.board.asset.tag: Default string dmi.board.name: CROSSHAIR VI HERO dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr8101:bd07/15/2021:br5.13:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnCROSSHAIRVIHERO:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:skuSKU: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal third-party-packages wayland-session ** Description changed: I described the issue here first: https://bugs.launchpad.net/ubuntu/+bug/1957816 + + I am not sure it belongs here, but after the initial report i made an + audio issue report with `ubuntu-bug -s audio` copy/paste: I have a desktop computer with a 60Hz 4K display connected through Display Port. The display is a ThinkVision X1 with built in audio. With the Display Port cable I am then able to output sound from the monitor and this works without any issues. I have now added a 4K Samsung television through HDMI to the same GPU, which also allows me to do 4K at 60Hz, albeit only with Wayland. In Xorg I can only do 30Hz on the television while doing 60Hz on the ThinkVision X1. It is clear however, that when it is set to 60Hz in Wayland, the animation on the television is much more smooth. The problem is that whenever I set the televisio
[Touch-packages] [Bug 574287] Re: tasksel: forcefully removes packages when tasks overlap
** Tags removed: rls-jj-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/574287 Title: tasksel: forcefully removes packages when tasks overlap Status in apt package in Ubuntu: Invalid Status in tasksel package in Ubuntu: Confirmed Status in tasksel package in Debian: Fix Released Bug description: TEST CASE 1. Boot Lucid LiveCD 2. run "sudo tasksel" and select "virtual machine host" 3. run "sudo tasksel" and deselect "virtual machine host" 4. watch how tasksel uninstalls your system OBSERVATIONS What seems to happen is that apt vengefully removes ALL of the items associated with one task, including several base dependencies of other tasks (e.g. ubuntu-desktop) One illustrative example is the openssh-server task: This one includes the packages openssh-server, tcpd and libwrap0. From a normal ubuntu-desktop (e.g. ~liveCD) both tcpd and libwrap0 are already installed, and the task-install pulls in only openssh-server. However when the task is removed, all these three packages (openssh-server, tcpd and libwrap0) are forcefully removed. Since libwrap0 is a core dependency of gnome, a large part of gnome will be removed alongside the removal of the task. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/574287/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951943] Re: Engine crashes when loading the configuration more than once
This bug was fixed in the package openssl - 3.0.1-0ubuntu1 --- openssl (3.0.1-0ubuntu1) jammy; urgency=medium * New upstream release (LP: #1955026). + Dropped patches, merged upstream: - d/p/double-engine-load* - d/p/Add-null-digest-implementation-to-the-default-provid.patch - d/p/Don-t-create-an-ECX-key-with-short-keys.patch + Refreshed patches: - d/p/c_rehash-compat.patch -- Simon Chopin Thu, 16 Dec 2021 09:10:48 +0100 ** Changed in: openssl (Ubuntu Jammy) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssl in Ubuntu. https://bugs.launchpad.net/bugs/1951943 Title: Engine crashes when loading the configuration more than once Status in openssl package in Ubuntu: Fix Released Status in openssl source package in Bionic: Fix Released Status in openssl source package in Focal: Fix Released Status in openssl source package in Hirsute: Fix Released Status in openssl source package in Impish: Fix Released Status in openssl source package in Jammy: Fix Released Bug description: [Impact] * Engine crashes when loading the configuration more than once * Upstream started to avoid loading engines twice by using dynamic ids to track the loaded engines correctly * OpenSSL 3 https://github.com/openssl/openssl/commit/81c11349c2a0e945aa3dfc6bd81c957363dd2011 (bugfix) https://github.com/openssl/openssl/commit/38e2957249c90317a26a080c7e7eb186dd5b6598 (test case) * OpenSSL 1.1.1 backports: https://github.com/openssl/openssl/commit/9b06ebb1edfddffea083ba36090af7eb7cad207b (bugfix) https://github.com/openssl/openssl/pull/17083 (test case) [Test Plan] * https://github.com/openssl/openssl/issues/17023 lists multiple ways how one can trigger the issue at hand, but also test case implements this issue too by explicitly attempting to load an engine multiple times and checking that it is operational. The test a is run during the build as part of the upstream regression test suite, for the shared library build (as static build does not support engines), so you'll see one pass and one skip in the log. [Where problems could occur] * Separately we have started to fix userspace packages that needlessly load configuration files multiple times, which used to trigger this issue. The codepaths changed are with engine use, how they are loaded/unloaded/used. It is possible that this fix will make some engines to start working and be used resulting in new behaviour. But also exposing bugs in the engines that previously were installed & configured but not actually used. [Other Info] * Previous bug reports about this issues are: https://bugs.launchpad.net/ubuntu/+source/wget/+bug/1921518 https://bugs.launchpad.net/ubuntu/+source/curl/+bug/1940528 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssl/+bug/1951943/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1955026] Re: Upgrade openssl to 3.0.1 on Jammy
This bug was fixed in the package openssl - 3.0.1-0ubuntu1 --- openssl (3.0.1-0ubuntu1) jammy; urgency=medium * New upstream release (LP: #1955026). + Dropped patches, merged upstream: - d/p/double-engine-load* - d/p/Add-null-digest-implementation-to-the-default-provid.patch - d/p/Don-t-create-an-ECX-key-with-short-keys.patch + Refreshed patches: - d/p/c_rehash-compat.patch -- Simon Chopin Thu, 16 Dec 2021 09:10:48 +0100 ** Changed in: openssl (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssl in Ubuntu. https://bugs.launchpad.net/bugs/1955026 Title: Upgrade openssl to 3.0.1 on Jammy Status in openssl package in Ubuntu: Fix Released Bug description: Upstream has released a new version 3.0.1, including a security fix. https://mta.openssl.org/pipermail/openssl-announce/2021-December/000212.html https://mta.openssl.org/pipermail/openssl-announce/2021-December/000213.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssl/+bug/1955026/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1956954] Re: Can't load seccomp filter
If you want to change the value without rebooting that's: sudo sysctl net.core.bpf_jit_limit=264241152 Add it to /etc/sysctl.conf if you want to set it automatically at boot, but it's more meaningful to test as you said: wait for the issue to happen and then change the value while the system is running. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libseccomp in Ubuntu. https://bugs.launchpad.net/bugs/1956954 Title: Can't load seccomp filter Status in libseccomp package in Ubuntu: Incomplete Bug description: After migrating from Ubuntu 20 amd64 to aarch64 I started experiencing "can't load seccomp filter" when doing `apt update && apt upgrade` and "Kernel refuses to turn on BPF filters" when using Puppeteer. I wrote about it more extensively here: https://stackoverflow.com/questions/69892137/after-a-few-days-i-can- no-longer-start-puppeteer-until-i-restart-the-server lsb_release -rd --- Description: Ubuntu 20.04.3 LTS Release: 20.04 apt-cache policy seccomp --- seccomp: Installed: (none) Candidate: 2.5.1-1ubuntu1~20.04.2 Version table: 2.5.1-1ubuntu1~20.04.2 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal-updates/main arm64 Packages 500 http://ports.ubuntu.com/ubuntu-ports focal-security/main arm64 Packages 2.4.3-1ubuntu1 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal/main arm64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libseccomp/+bug/1956954/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1956954] Re: Can't load seccomp filter
Dear Paride, Thank you so much I'll wait for the issue to resurface and *then* bump the value in order to have conclusive evidence. How should I do it? echo "net.core.bpf_jit_limit = 262144000" >> /etc/sysctl.conf (as sudo) Will that work without restart? Because the problem goes away after I restart. Regards, Nino -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libseccomp in Ubuntu. https://bugs.launchpad.net/bugs/1956954 Title: Can't load seccomp filter Status in libseccomp package in Ubuntu: Incomplete Bug description: After migrating from Ubuntu 20 amd64 to aarch64 I started experiencing "can't load seccomp filter" when doing `apt update && apt upgrade` and "Kernel refuses to turn on BPF filters" when using Puppeteer. I wrote about it more extensively here: https://stackoverflow.com/questions/69892137/after-a-few-days-i-can- no-longer-start-puppeteer-until-i-restart-the-server lsb_release -rd --- Description: Ubuntu 20.04.3 LTS Release: 20.04 apt-cache policy seccomp --- seccomp: Installed: (none) Candidate: 2.5.1-1ubuntu1~20.04.2 Version table: 2.5.1-1ubuntu1~20.04.2 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal-updates/main arm64 Packages 500 http://ports.ubuntu.com/ubuntu-ports focal-security/main arm64 Packages 2.4.3-1ubuntu1 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal/main arm64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libseccomp/+bug/1956954/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1956954] Re: Can't load seccomp filter
Hi Nino, I found a RedHat bug [1] that describes a similar situation (affected is dhclient on ppc64le, but the error is the same). The suggested workaround is setting net.core.bpf_jit_limit = 262144000 via sysctl. I checked and on amd64 I find net.core.bpf_jit_limit = 264241152 while on an arm64 machine that's: net.core.bpf_jit_limit = 33554432 (both machines are running Bionic), so it looks arch-dependent indeed. Could you please try bumping that value, and check if the issue goes away? If it does go away we can ask the kernel team what they think about bumping it by default. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1647947 ** Bug watch added: Red Hat Bugzilla #1647947 https://bugzilla.redhat.com/show_bug.cgi?id=1647947 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libseccomp in Ubuntu. https://bugs.launchpad.net/bugs/1956954 Title: Can't load seccomp filter Status in libseccomp package in Ubuntu: Incomplete Bug description: After migrating from Ubuntu 20 amd64 to aarch64 I started experiencing "can't load seccomp filter" when doing `apt update && apt upgrade` and "Kernel refuses to turn on BPF filters" when using Puppeteer. I wrote about it more extensively here: https://stackoverflow.com/questions/69892137/after-a-few-days-i-can- no-longer-start-puppeteer-until-i-restart-the-server lsb_release -rd --- Description: Ubuntu 20.04.3 LTS Release: 20.04 apt-cache policy seccomp --- seccomp: Installed: (none) Candidate: 2.5.1-1ubuntu1~20.04.2 Version table: 2.5.1-1ubuntu1~20.04.2 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal-updates/main arm64 Packages 500 http://ports.ubuntu.com/ubuntu-ports focal-security/main arm64 Packages 2.4.3-1ubuntu1 500 500 http://us-east-1.ec2.ports.ubuntu.com/ubuntu-ports focal/main arm64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libseccomp/+bug/1956954/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957194] Re: resume from hibernation broken when resume image is autodetected another case
Note.
This problem appears itself if the swap partition is located on a regular
partition of disk.
Initramfs hook resume write `RESUME=UUID=someuuid` to the
`conf/conf.d/zz-resume-auto`
If the swap partition is on a logical volume (e.g. LVM), then
`conf/conf.d/zz-resume-auto` has a variable with a device
`RESUME=/dev/commonvolumegroup/swap` and `/usr/share/initramfs-
tools/scripts/local-premount/resume` works properly.
This issue applies to both hibernation and hybrid sleep modes. Because
hybrid sleep mode is a combination of both modes (S4+S3).
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1957194
Title:
resume from hibernation broken when resume image is autodetected
another case
Status in initramfs-tools package in Ubuntu:
New
Bug description:
My issue very similar to
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1769297
I am assuming that the code at about line 162 in
`/usr/share/initramfs-tools/init` like that:
```
resume=*)
RESUME="${x#resume=}"
case $RESUME in
UUID=*)
RESUME="/dev/disk/by-uuid/${RESUME#UUID=}"
esac
;;
```
Only works if user wants to set resume partition as `UUID=some` at
file like `/etc/initramfs-tools/conf.d/resume`. But in the case when
initramfs hook resume automatically save `UUID=some` in initrd
`conf/conf.d/zz-resume-auto` file it doesn't matter. Including for
operate `DEV=$(readlink -f "$resume")` correctly in
`/usr/share/initramfs-tools/scripts/local-premount/resume`
Therefore I decide to add similar code to `/usr/share/initramfs-
tools/scripts/local-premount/resume` to fix an issue with resuming.
See a patch in attachment.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1957194/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957086] Re: Autopkgtest systemd fail against dnsmasq 2.86 (22.04)
** Tags added: server-next -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1957086 Title: Autopkgtest systemd fail against dnsmasq 2.86 (22.04) Status in dnsmasq package in Ubuntu: New Status in systemd package in Ubuntu: New Bug description: Full log (same on all architectures): https://autopkgtest.ubuntu.com/results/autopkgtest-jammy/jammy/arm64/s/systemd/20220106_214401_24d29@/log.gz The test is from systemd: https://github.com/systemd/systemd/blob/main/test/networkd-test.py#L619 Tail of the log: ``` ERROR: test_resolved_domain_restricted_dns (__main__.DnsmasqClientTest) resolved: domain-restricted DNS servers -- Traceback (most recent call last): File "/tmp/autopkgtest.NdIvJq/build.fBQ/src/test/networkd-test.py", line 678, in test_resolved_domain_restricted_dns out = subprocess.check_output(['resolvectl', 'query', 'math.lab']) File "/usr/lib/python3.9/subprocess.py", line 424, in check_output return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, File "/usr/lib/python3.9/subprocess.py", line 528, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command '['resolvectl', 'query', 'math.lab']' returned non-zero exit status 1. ``` Tagging update-excuse to be shown in excuses To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1957086/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1955797] Re: [SRU] network-manager can’t modify MTU automatically based on what ModemManager exposes for WWAN modems.
Sponsored the change, it should now be in the focal Unapproved queue, waiting from someone from the SRU team to review and accept. I also pushed the change to the git repository. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1955797 Title: [SRU] network-manager can’t modify MTU automatically based on what ModemManager exposes for WWAN modems. Status in network-manager package in Ubuntu: Fix Released Status in network-manager source package in Focal: New Bug description: [Impact] Some 4G/5G mobile networks(for ex., AT&T) requires a specific MTU setting, this setting will be exposed by the ModemManager for network- manger to configure the MTU of the modem network interface . The current modem-manager v1.22.10-1ubuntu2.2 in focal can’t pass AT&T’s modem system certification. [Fix] This upstream patch can resolve this bug: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/499/diffs?commit_id=212758ea05a4c13d65f36b55c90aee7919642631 [Test Plan] 1. Use a Lenovo platform SE30 including 4G Quectel EM160 modem and an AT&T SIM card in US 2. Enable 4G modem and connect to AT&T apn $ sudo mmcli -i 0 --pin= $ sudo mmcli --modem 0 --enable $ sudo mmcli -m 0 --simple-connect="pin=,apn=emome" $ sudo nmcli radio wwan on $ sudo nmcli connection add type gsm ifname wwan0p2MBIM con-name mymodem apn emome $ sudo nmcli connection up id mymodem 3. Check if the MTU got from the following results are the same: $ sudo mmcli --bearer 5 | mtu $ ifconfig mhi_mbim0 | grep mtu * Expected result: Both MTUs are the same value 1430 * Actual tested result: Different values (one is 1430 , another is 1500) [Where problems could occur] Very low. This is a simple fix: network-manager gets the MTU from the ModemManager then sets the MTU of the modem interface. [Other info] 1. Network-manager v1.30.0-1ubuntu3 in hirsute has included the fix. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1955797/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1951779] Re: tempfile command removed from debianutils
** Merge proposal linked: https://code.launchpad.net/~paelzer/ubuntu/+source/grub-legacy-ec2/+git/grub-legacy-ec2/+merge/414091 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bzip2 in Ubuntu. https://bugs.launchpad.net/bugs/1951779 Title: tempfile command removed from debianutils Status in boost1.74 package in Ubuntu: New Status in bzip2 package in Ubuntu: New Status in ceph package in Ubuntu: New Status in grub-legacy-ec2 package in Ubuntu: Triaged Bug description: Error when do-release-upgrade -d from 20.04.3 ProblemType: Package DistroRelease: Ubuntu 22.04 Package: linux-image-5.13.0-19-generic 5.13.0-19.19 ProcVersionSignature: Ubuntu 5.4.0-90.101-generic 5.4.148 Uname: Linux 5.4.0-90-generic x86_64 ApportVersion: 2.20.11-0ubuntu73 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown Date: Mon Nov 22 13:31:36 2021 ErrorMessage: run-parts: /etc/kernel/postinst.d/x-grub-legacy-ec2 exited with return code 127 InstallationDate: Installed on 2018-10-01 (1147 days ago) InstallationMedia: Ubuntu-Server 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lsusb: Bus 001 Device 002: ID 8087:07e6 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Lsusb-t: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M MachineType: PAIQ EC3-BT19D4L ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-90-generic root=UUID=4c36d2b3-c1dd-469f-bfbf-5b7052d669d4 ro ipv6.disable=1 quiet reboot=pci ipv6.disable=1 Python3Details: Error: command ['readlink', '-f', "/usr/bin/which: this version of `which' is deprecated; use `command -v' in scripts instead.\n/usr/bin/python3"] failed with exit code 1: , Error: [Errno 2] No such file or directory: 'Error: command [\'readlink\', \'-f\', "/usr/bin/which: this version of `which\' is deprecated; use `command -v\' in scripts instead.\\n/usr/bin/python3"] failed with exit code 1: ', python3-minimal, 3.9.4-1build1 PythonDetails: N/A RebootRequiredPkgs: Error: path contained symlinks. RelatedPackageVersions: grub-pc 2.04-1ubuntu48 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: grub-legacy-ec2 Title: package linux-image-5.13.0-19-generic 5.13.0-19.19 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/x-grub-legacy-ec2 exited with return code 127 UpgradeStatus: Upgraded to jammy on 2021-11-22 (0 days ago) dmi.bios.date: 02/28/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: EC3-BT19D4L dmi.board.vendor: PAIQ dmi.board.version: A1 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.6.5:bd02/28/2017:svnPAIQ:pnEC3-BT19D4L:pvrBIOSNameBT190003BIOSVersionA1BuildDate:rvnPAIQ:rnEC3-BT19D4L:rvrA1:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: EC3-BT19D4L dmi.product.sku: 18:19:28 dmi.product.version: BIOS Name:BT190003 BIOS Version:A1 Build Date: dmi.sys.vendor: PAIQ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/boost1.74/+bug/1951779/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1957194] Re: resume from hibernation broken when resume image is autodetected another case
What do you think about proposed solution ? May by it's absolutely wrong
?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1957194
Title:
resume from hibernation broken when resume image is autodetected
another case
Status in initramfs-tools package in Ubuntu:
New
Bug description:
My issue very similar to
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1769297
I am assuming that the code at about line 162 in
`/usr/share/initramfs-tools/init` like that:
```
resume=*)
RESUME="${x#resume=}"
case $RESUME in
UUID=*)
RESUME="/dev/disk/by-uuid/${RESUME#UUID=}"
esac
;;
```
Only works if user wants to set resume partition as `UUID=some` at
file like `/etc/initramfs-tools/conf.d/resume`. But in the case when
initramfs hook resume automatically save `UUID=some` in initrd
`conf/conf.d/zz-resume-auto` file it doesn't matter. Including for
operate `DEV=$(readlink -f "$resume")` correctly in
`/usr/share/initramfs-tools/scripts/local-premount/resume`
Therefore I decide to add similar code to `/usr/share/initramfs-
tools/scripts/local-premount/resume` to fix an issue with resuming.
See a patch in attachment.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1957194/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
