Re: [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache

[Matthew Fortune]

Matthias Schiffer  writes:
> >
> > I've disabled the builtin code and compared dissaemblies with and
> without your patch. Without your patch, gcc adds an additional store
> instruction before each cache instruction.
> >
> > E.g. for flush_dcache_range():
> >
> >   18:   afa20008sw  v0,8(sp)
> >   1c:   bfb50008cache   0x15,8(sp)
> >
> > vs.
> >
> >   14:   bc55cache   0x15,0(v0)
> >
> > The cache operation works anyway, but with your patch better code is
> generated.
> 
> If I understand this correctly, the code without my patch would rather
> invalidate the cache for the address 8(sp), which is part of the stack,
> and not the memory pointed at by v0.

Matthias is correct. These two code sequences will exhibit different
overall behaviour. The latter is much more likely to be what you wanted
from what I can see as the flush is to operate on the value of the
'addr' variable not the address of the addr variable.

The same behaviour could be achieved with:

__asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr));

and

__asm__ __volatile__("cache %0, 0(%1)" : : "i"(op), "r"());

Hope that's useful.

Matthew
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache

[Matthias Schiffer]

On 03/06/2016 08:38 PM, Daniel Schwierzeck wrote:
> 
> 
> Am 05.03.2016 um 04:15 schrieb Matthias Schiffer:
>> The "R" constraint supplies the address of an variable in a register. Use
>> "r" instead and adjust asm to supply the content of addr in a register
>> instead.
>>
>> Fixes: 2b8bcc5a ("MIPS: avoid .set ISA for cache operations")
>> Signed-off-by: Matthias Schiffer 
>> Cc: Paul Burton 
>> Cc: Daniel Schwierzeck 
>> ---
>>
>> Hi,
>> I've noticed this when reading the code to understand how the cache
>> instruction is used. I'm not sure if this bug had any practical
>> consequences, or if nowadays all relevant compilers have
>> __builtin_mips_cache anyways.
>>
>> Please keep me in Cc in follow-up mails, I'm not subscribed to the u-boot
>> ML.
>>
>> Matthias
> 
> I've disabled the builtin code and compared dissaemblies with and without 
> your patch. Without your patch, gcc adds an additional store instruction 
> before each cache instruction. 
> 
> E.g. for flush_dcache_range():
> 
>   18: afa20008sw  v0,8(sp)
>   1c: bfb50008cache   0x15,8(sp)
> 
> vs.
> 
>   14: bc55cache   0x15,0(v0)
> 
> The cache operation works anyway, but with your patch better code is 
> generated.

If I understand this correctly, the code without my patch would rather
invalidate the cache for the address 8(sp), which is part of the stack,
and not the memory pointed at by v0.

> 
>>
>>
>>  arch/mips/include/asm/cacheops.h | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/mips/include/asm/cacheops.h 
>> b/arch/mips/include/asm/cacheops.h
>> index a3b07c6..002b839 100644
>> --- a/arch/mips/include/asm/cacheops.h
>> +++ b/arch/mips/include/asm/cacheops.h
>> @@ -16,7 +16,7 @@ static inline void mips_cache(int op, const volatile void 
>> *addr)
>>  #ifdef __GCC_HAVE_BUILTIN_MIPS_CACHE
>>  __builtin_mips_cache(op, addr);
>>  #else
>> -__asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr));
>> +__asm__ __volatile__("cache %0, 0(%1)" : : "i"(op), "r"(addr));
>>  #endif
>>  }
>>  
>>
> 
> applied to u-boot-mips/next, thanks!
> 




signature.asc
Description: OpenPGP digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache

[Daniel Schwierzeck]

Am 06.03.2016 um 20:53 schrieb Matthias Schiffer:
> On 03/06/2016 08:38 PM, Daniel Schwierzeck wrote:
>>
>>
>> Am 05.03.2016 um 04:15 schrieb Matthias Schiffer:
>>> The "R" constraint supplies the address of an variable in a register. Use
>>> "r" instead and adjust asm to supply the content of addr in a register
>>> instead.
>>>
>>> Fixes: 2b8bcc5a ("MIPS: avoid .set ISA for cache operations")
>>> Signed-off-by: Matthias Schiffer 
>>> Cc: Paul Burton 
>>> Cc: Daniel Schwierzeck 
>>> ---
>>>
>>> Hi,
>>> I've noticed this when reading the code to understand how the cache
>>> instruction is used. I'm not sure if this bug had any practical
>>> consequences, or if nowadays all relevant compilers have
>>> __builtin_mips_cache anyways.
>>>
>>> Please keep me in Cc in follow-up mails, I'm not subscribed to the u-boot
>>> ML.
>>>
>>> Matthias
>>
>> I've disabled the builtin code and compared dissaemblies with and without 
>> your patch. Without your patch, gcc adds an additional store instruction 
>> before each cache instruction. 
>>
>> E.g. for flush_dcache_range():
>>
>>   18:afa20008sw  v0,8(sp)
>>   1c:bfb50008cache   0x15,8(sp)
>>
>> vs.
>>
>>   14:bc55cache   0x15,0(v0)
>>
>> The cache operation works anyway, but with your patch better code is 
>> generated.
> 
> If I understand this correctly, the code without my patch would rather
> invalidate the cache for the address 8(sp), which is part of the stack,
> and not the memory pointed at by v0.

"sw v0,8(sp)" stores the address in v0 on the stack (location is current stack 
pointer + 8 * 4 bytes). The cache op then loads this address from stack. 
Eventually the cache op always uses the address stored in v0 so there is/was no 
functional bug. But the extra copy to the stack causes a performance 
degradation.

-- 
- Daniel
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache

[Daniel Schwierzeck]

Am 05.03.2016 um 04:15 schrieb Matthias Schiffer:
> The "R" constraint supplies the address of an variable in a register. Use
> "r" instead and adjust asm to supply the content of addr in a register
> instead.
> 
> Fixes: 2b8bcc5a ("MIPS: avoid .set ISA for cache operations")
> Signed-off-by: Matthias Schiffer 
> Cc: Paul Burton 
> Cc: Daniel Schwierzeck 
> ---
> 
> Hi,
> I've noticed this when reading the code to understand how the cache
> instruction is used. I'm not sure if this bug had any practical
> consequences, or if nowadays all relevant compilers have
> __builtin_mips_cache anyways.
> 
> Please keep me in Cc in follow-up mails, I'm not subscribed to the u-boot
> ML.
> 
> Matthias

I've disabled the builtin code and compared dissaemblies with and without your 
patch. Without your patch, gcc adds an additional store instruction before each 
cache instruction. 

E.g. for flush_dcache_range():

  18:   afa20008sw  v0,8(sp)
  1c:   bfb50008cache   0x15,8(sp)

vs.

  14:   bc55cache   0x15,0(v0)

The cache operation works anyway, but with your patch better code is generated.

> 
> 
>  arch/mips/include/asm/cacheops.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/mips/include/asm/cacheops.h 
> b/arch/mips/include/asm/cacheops.h
> index a3b07c6..002b839 100644
> --- a/arch/mips/include/asm/cacheops.h
> +++ b/arch/mips/include/asm/cacheops.h
> @@ -16,7 +16,7 @@ static inline void mips_cache(int op, const volatile void 
> *addr)
>  #ifdef __GCC_HAVE_BUILTIN_MIPS_CACHE
>   __builtin_mips_cache(op, addr);
>  #else
> - __asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr));
> + __asm__ __volatile__("cache %0, 0(%1)" : : "i"(op), "r"(addr));
>  #endif
>  }
>  
> 

applied to u-boot-mips/next, thanks!

-- 
- Daniel
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH] MIPS: fix mips_cache fallback without __builtin_mips_cache

[Matthias Schiffer]

The "R" constraint supplies the address of an variable in a register. Use
"r" instead and adjust asm to supply the content of addr in a register
instead.

Fixes: 2b8bcc5a ("MIPS: avoid .set ISA for cache operations")
Signed-off-by: Matthias Schiffer 
Cc: Paul Burton 
Cc: Daniel Schwierzeck 
---

Hi,
I've noticed this when reading the code to understand how the cache
instruction is used. I'm not sure if this bug had any practical
consequences, or if nowadays all relevant compilers have
__builtin_mips_cache anyways.

Please keep me in Cc in follow-up mails, I'm not subscribed to the u-boot
ML.

Matthias


 arch/mips/include/asm/cacheops.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index a3b07c6..002b839 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -16,7 +16,7 @@ static inline void mips_cache(int op, const volatile void 
*addr)
 #ifdef __GCC_HAVE_BUILTIN_MIPS_CACHE
__builtin_mips_cache(op, addr);
 #else
-   __asm__ __volatile__("cache %0, %1" : : "i"(op), "R"(addr));
+   __asm__ __volatile__("cache %0, 0(%1)" : : "i"(op), "r"(addr));
 #endif
 }
 
-- 
2.7.2

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot