Re: [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
Am 2012-11-23 23:23, schrieb Angelo Dureghello: Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd-reloc_off is calculated. Signed-off-by: Angelo Dureghello sysa...@gmail.com Cc: Jason Jin jason@freescale.com --- diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..373570c 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr) gd-flags |= GD_FLG_RELOC; /* tell others: relocation done */ - serial_initialize(); - debug (Now running in RAM - U-Boot at: %08lx\n, dest_addr); WATCHDOG_RESET (); gd-reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; + serial_initialize(); + monitor_flash_len = (ulong)__init_end - dest_addr; #if defined(CONFIG_NEEDS_MANUAL_RELOC) Acked-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de Tested-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
On Fri, Jan 11, 2013 at 03:45:26PM +0100, Jens Scharsig wrote: Am 2012-11-23 23:23, schrieb Angelo Dureghello: Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd-reloc_off is calculated. Signed-off-by: Angelo Dureghello sysa...@gmail.com Cc: Jason Jin jason@freescale.com --- diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..373570c 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr) gd-flags |= GD_FLG_RELOC; /* tell others: relocation done */ - serial_initialize(); - debug (Now running in RAM - U-Boot at: %08lx\n, dest_addr); WATCHDOG_RESET (); gd-reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; + serial_initialize(); + monitor_flash_len = (ulong)__init_end - dest_addr; #if defined(CONFIG_NEEDS_MANUAL_RELOC) Acked-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de Tested-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd-reloc_off is calculated. Signed-off-by: Angelo Dureghello sysa...@gmail.com Cc: Jason Jin jason@freescale.com --- diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..373570c 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr) gd-flags |= GD_FLG_RELOC; /* tell others: relocation done */ - serial_initialize(); - debug (Now running in RAM - U-Boot at: %08lx\n, dest_addr); WATCHDOG_RESET (); gd-reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; + serial_initialize(); + monitor_flash_len = (ulong)__init_end - dest_addr; #if defined(CONFIG_NEEDS_MANUAL_RELOC) ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot