Re: [U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init

2014-05-09 Thread Stefano Babic 
On 23/04/2014 06:53, Tim Harvey wrote:
 Signed-off-by: Tim Harvey thar...@gateworks.com
 ---
  board/gateworks/gw_ventana/gw_ventana.c | 5 +++--
  1 file changed, 3 insertions(+), 2 deletions(-)
 
 diff --git a/board/gateworks/gw_ventana/gw_ventana.c 
 b/board/gateworks/gw_ventana/gw_ventana.c
 index c130e2c..48e90e0 100644
 --- a/board/gateworks/gw_ventana/gw_ventana.c
 +++ b/board/gateworks/gw_ventana/gw_ventana.c
 @@ -1077,10 +1077,11 @@ int misc_init_r(void)
   }
  
   /* configure PFUZE100 PMIC (not used on all Ventana baseboards) */
 - if ((board_type == GW54xx || board_type == GW54proto) 
 - !pmic_init(I2C_PMIC)) {
 + power_pfuze100_init(I2C_PMIC);
 + if (board_type == GW54xx || board_type == GW54proto) {
   struct pmic *p = pmic_get(PFUZE100_PMIC);
   u32 reg;
 +
   if (p  !pmic_probe(p)) {
   pmic_reg_read(p, PFUZE100_DEVICEID, reg);
   printf(PMIC:  PFUZE100 ID=0x%02x\n, reg);
 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=
DENX Software Engineering GmbH, MD: Wolfgang Denk  Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init

2014-04-22 Thread Tim Harvey 
Signed-off-by: Tim Harvey thar...@gateworks.com
---
 board/gateworks/gw_ventana/gw_ventana.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/gateworks/gw_ventana/gw_ventana.c 
b/board/gateworks/gw_ventana/gw_ventana.c
index c130e2c..48e90e0 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1077,10 +1077,11 @@ int misc_init_r(void)
}
 
/* configure PFUZE100 PMIC (not used on all Ventana baseboards) */
-   if ((board_type == GW54xx || board_type == GW54proto) 
-   !pmic_init(I2C_PMIC)) {
+   power_pfuze100_init(I2C_PMIC);
+   if (board_type == GW54xx || board_type == GW54proto) {
struct pmic *p = pmic_get(PFUZE100_PMIC);
u32 reg;
+
if (p  !pmic_probe(p)) {
pmic_reg_read(p, PFUZE100_DEVICEID, reg);
printf(PMIC:  PFUZE100 ID=0x%02x\n, reg);
-- 
1.8.3.2

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot