Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote: On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek VasutCc: Daniel Schwierzeck Cc: Wills Wang --- arch/mips/mach-ath79/Kconfig | 6 -- board/ath79/ap121/Kconfig| 6 ++ board/ath79/ap143/Kconfig| 6 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143" I plan to place ap121 and ap143 into board/qca, and then move these into board directory. That's fine, but keep this patch or something along those lines, since I want to create board/arduino/yun/ soon after your stuff is accepted. btw. I got both EHCI and ethernet operational, but I am still struggling with booting the board from the SPI NOR. I think there's something broken in start.S or lowlevel_init.S . Which board do you use for your development and testing ? My private board was made by myself, it originate from AP121, and it's circuit is compatible with AP121. How do you program your board ? Do you have EJTAG? What SPI NOR do you use? My flash chip is W25Q64FV. I place a chip socket on board, flash chip can be plugged in or out easily. -- Best Regards Wills ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Friday, January 29, 2016 at 09:46:24 AM, Wills Wang wrote: > On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote: > > On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: > >> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > >>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > > In order to support boards with ath79 from different vendors and > > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > > and SYS_SOC in the board-level Kconfig. Move these two variables > > into board-level Kconfig for both ap121 and ap143 boards. > > > > Signed-off-by: Marek Vasut> > Cc: Daniel Schwierzeck > > Cc: Wills Wang > > --- > > > > arch/mips/mach-ath79/Kconfig | 6 -- > > board/ath79/ap121/Kconfig| 6 ++ > > board/ath79/ap143/Kconfig| 6 ++ > > 3 files changed, 12 insertions(+), 6 deletions(-) > > > > diff --git a/arch/mips/mach-ath79/Kconfig > > b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 > > --- a/arch/mips/mach-ath79/Kconfig > > +++ b/arch/mips/mach-ath79/Kconfig > > @@ -1,12 +1,6 @@ > > > > menu "QCA/Athroes 7xxx/9xxx platforms" > > > > depends on ARCH_ATH79 > > > > -config SYS_VENDOR > > - default "ath79" > > - > > -config SYS_SOC > > - default "ath79" > > - > > > > config SOC_AR933X > > > > bool > > select SUPPORTS_BIG_ENDIAN > > > > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > > index ec72914..a4e5690 100644 > > --- a/board/ath79/ap121/Kconfig > > +++ b/board/ath79/ap121/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP121 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap121" > > > > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > > index 118b9b5..2e54fa7 100644 > > --- a/board/ath79/ap143/Kconfig > > +++ b/board/ath79/ap143/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP143 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap143" > > I plan to place ap121 and ap143 into board/qca, and then > move these into board directory. > >>> > >>> That's fine, but keep this patch or something along those lines, since > >>> I want to create board/arduino/yun/ soon after your stuff is accepted. > >>> > >>> btw. I got both EHCI and ethernet operational, but I am still > >>> struggling with booting the board from the SPI NOR. I think there's > >>> something broken in start.S or lowlevel_init.S . Which board do you > >>> use for your development and testing ? > >> > >> My private board was made by myself, it originate from AP121, and > >> it's circuit is compatible with AP121. > > > > How do you program your board ? Do you have EJTAG? > > > > What SPI NOR do you use? > > My flash chip is W25Q64FV. > I place a chip socket on board, flash chip can be plugged in or out easily. I see, OK. Just out of sheer curiosity, are you doing the ath79 support as a hobby thing or are you putting out an actual product ? Also, you might want to join the u-boot IRC, it's easier to discuss things in real time. Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek VasutCc: Daniel Schwierzeck Cc: Wills Wang --- arch/mips/mach-ath79/Kconfig | 6 -- board/ath79/ap121/Kconfig| 6 ++ board/ath79/ap143/Kconfig| 6 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143" I plan to place ap121 and ap143 into board/qca, and then move these into board directory. -- Best Regards Wills ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek VasutCc: Daniel Schwierzeck Cc: Wills Wang --- arch/mips/mach-ath79/Kconfig | 6 -- board/ath79/ap121/Kconfig| 6 ++ board/ath79/ap143/Kconfig| 6 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143" I plan to place ap121 and ap143 into board/qca, and then move these into board directory. That's fine, but keep this patch or something along those lines, since I want to create board/arduino/yun/ soon after your stuff is accepted. btw. I got both EHCI and ethernet operational, but I am still struggling with booting the board from the SPI NOR. I think there's something broken in start.S or lowlevel_init.S . Which board do you use for your development and testing ? My private board was made by myself, it originate from AP121, and it's circuit is compatible with AP121. -- Best Regards Wills ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek VasutCc: Daniel Schwierzeck Cc: Wills Wang --- arch/mips/mach-ath79/Kconfig | 6 -- board/ath79/ap121/Kconfig| 6 ++ board/ath79/ap143/Kconfig| 6 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143" I plan to place ap121 and ap143 into board/qca, and then move these into board directory. -- Best Regards Wills ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > > In order to support boards with ath79 from different vendors and > > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > > and SYS_SOC in the board-level Kconfig. Move these two variables > > into board-level Kconfig for both ap121 and ap143 boards. > > > > Signed-off-by: Marek Vasut> > Cc: Daniel Schwierzeck > > Cc: Wills Wang > > --- > > > > arch/mips/mach-ath79/Kconfig | 6 -- > > board/ath79/ap121/Kconfig| 6 ++ > > board/ath79/ap143/Kconfig| 6 ++ > > 3 files changed, 12 insertions(+), 6 deletions(-) > > > > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig > > index 95f7de9..8f07a77 100644 > > --- a/arch/mips/mach-ath79/Kconfig > > +++ b/arch/mips/mach-ath79/Kconfig > > @@ -1,12 +1,6 @@ > > > > menu "QCA/Athroes 7xxx/9xxx platforms" > > > > depends on ARCH_ATH79 > > > > -config SYS_VENDOR > > - default "ath79" > > - > > -config SYS_SOC > > - default "ath79" > > - > > > > config SOC_AR933X > > > > bool > > select SUPPORTS_BIG_ENDIAN > > > > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > > index ec72914..a4e5690 100644 > > --- a/board/ath79/ap121/Kconfig > > +++ b/board/ath79/ap121/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP121 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap121" > > > > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > > index 118b9b5..2e54fa7 100644 > > --- a/board/ath79/ap143/Kconfig > > +++ b/board/ath79/ap143/Kconfig > > @@ -1,5 +1,11 @@ > > > > if BOARD_AP143 > > > > +config SYS_VENDOR > > + default "ath79" > > + > > +config SYS_SOC > > + default "ath79" > > + > > > > config SYS_BOARD > > > > default "ap143" > > I plan to place ap121 and ap143 into board/qca, and then > move these into board directory. That's fine, but keep this patch or something along those lines, since I want to create board/arduino/yun/ soon after your stuff is accepted. btw. I got both EHCI and ethernet operational, but I am still struggling with booting the board from the SPI NOR. I think there's something broken in start.S or lowlevel_init.S . Which board do you use for your development and testing ? ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: > On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > > On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > >> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > >>> In order to support boards with ath79 from different vendors and > >>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > >>> and SYS_SOC in the board-level Kconfig. Move these two variables > >>> into board-level Kconfig for both ap121 and ap143 boards. > >>> > >>> Signed-off-by: Marek Vasut> >>> Cc: Daniel Schwierzeck > >>> Cc: Wills Wang > >>> --- > >>> > >>>arch/mips/mach-ath79/Kconfig | 6 -- > >>>board/ath79/ap121/Kconfig| 6 ++ > >>>board/ath79/ap143/Kconfig| 6 ++ > >>>3 files changed, 12 insertions(+), 6 deletions(-) > >>> > >>> diff --git a/arch/mips/mach-ath79/Kconfig > >>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 > >>> --- a/arch/mips/mach-ath79/Kconfig > >>> +++ b/arch/mips/mach-ath79/Kconfig > >>> @@ -1,12 +1,6 @@ > >>> > >>>menu "QCA/Athroes 7xxx/9xxx platforms" > >>> > >>> depends on ARCH_ATH79 > >>> > >>> -config SYS_VENDOR > >>> - default "ath79" > >>> - > >>> -config SYS_SOC > >>> - default "ath79" > >>> - > >>> > >>>config SOC_AR933X > >>> > >>> bool > >>> select SUPPORTS_BIG_ENDIAN > >>> > >>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > >>> index ec72914..a4e5690 100644 > >>> --- a/board/ath79/ap121/Kconfig > >>> +++ b/board/ath79/ap121/Kconfig > >>> @@ -1,5 +1,11 @@ > >>> > >>>if BOARD_AP121 > >>> > >>> +config SYS_VENDOR > >>> + default "ath79" > >>> + > >>> +config SYS_SOC > >>> + default "ath79" > >>> + > >>> > >>>config SYS_BOARD > >>> > >>> default "ap121" > >>> > >>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > >>> index 118b9b5..2e54fa7 100644 > >>> --- a/board/ath79/ap143/Kconfig > >>> +++ b/board/ath79/ap143/Kconfig > >>> @@ -1,5 +1,11 @@ > >>> > >>>if BOARD_AP143 > >>> > >>> +config SYS_VENDOR > >>> + default "ath79" > >>> + > >>> +config SYS_SOC > >>> + default "ath79" > >>> + > >>> > >>>config SYS_BOARD > >>> > >>> default "ap143" > >> > >> I plan to place ap121 and ap143 into board/qca, and then > >> move these into board directory. > > > > That's fine, but keep this patch or something along those lines, since > > I want to create board/arduino/yun/ soon after your stuff is accepted. > > > > btw. I got both EHCI and ethernet operational, but I am still struggling > > with booting the board from the SPI NOR. I think there's something broken > > in start.S or lowlevel_init.S . Which board do you use for your > > development and testing ? > > My private board was made by myself, it originate from AP121, and > it's circuit is compatible with AP121. How do you program your board ? Do you have EJTAG? What SPI NOR do you use? ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig
In order to support boards with ath79 from different vendors and thus located under /board/$VENDOR/ , we need to define SYS_VENDOR and SYS_SOC in the board-level Kconfig. Move these two variables into board-level Kconfig for both ap121 and ap143 boards. Signed-off-by: Marek VasutCc: Daniel Schwierzeck Cc: Wills Wang --- arch/mips/mach-ath79/Kconfig | 6 -- board/ath79/ap121/Kconfig| 6 ++ board/ath79/ap143/Kconfig| 6 ++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -1,12 +1,6 @@ menu "QCA/Athroes 7xxx/9xxx platforms" depends on ARCH_ATH79 -config SYS_VENDOR - default "ath79" - -config SYS_SOC - default "ath79" - config SOC_AR933X bool select SUPPORTS_BIG_ENDIAN diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig index ec72914..a4e5690 100644 --- a/board/ath79/ap121/Kconfig +++ b/board/ath79/ap121/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP121 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap121" diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig index 118b9b5..2e54fa7 100644 --- a/board/ath79/ap143/Kconfig +++ b/board/ath79/ap143/Kconfig @@ -1,5 +1,11 @@ if BOARD_AP143 +config SYS_VENDOR + default "ath79" + +config SYS_SOC + default "ath79" + config SYS_BOARD default "ap143" -- 2.1.4 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot