Re: [Ubnt_users] EdgeRouter config not applied
Figure this one out? I was think of a corrupted config file from surge. On Thu, Nov 10, 2016 at 6:54 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > This one has been rebooted several times in the past without losing its > config, but this power outage caused it to. It's not a lack of saving the > running config. > > Thank you, > Brett A Mansfield > > On Nov 10, 2016, at 4:31 PM, Clay Stewart stewartcomputerservices.com> wrote: > > Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards. > > On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell > wrote: > >> You still have to click "Save configuration" after you've made changes >> on the pages. It usually flashes red if it hasn't been saved to memory. >> >> -Original Message- >> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> On Behalf Of Brett A Mansfield >> Sent: Thursday, November 10, 2016 2:25 PM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] EdgeRouter config not applied >> >> This is managed exclusively through the GUI. >> >> Thank you, >> Brett A Mansfield >> >> > On Nov 10, 2016, at 12:12 PM, Andy Trimmell >> wrote: >> > >> > Did someone make config changes but didn't "save configuration"? maybe >> >> > it was just on the running config. >> > >> > -Original Message----- >> > From: ubnt_users-boun...@wispa.org >> > [mailto:ubnt_users-boun...@wispa.org] >> > On Behalf Of Brett A Mansfield >> > Sent: Thursday, November 10, 2016 2:09 PM >> > To: Ubiquiti Users Group >> > Subject: Re: [Ubnt_users] EdgeRouter config not applied >> > >> > Quick update, I changed config.boot to config.bootold and >> > config.boot.invalid.~ to config.boot and then rebooted. All is well >> now. >> > >> > Anyone have this happen before? Is there a way to prevent it besides >> > adding this to a battery backup? >> > >> > Thank you, >> > Brett A Mansfield >> > >> >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield >> > wrote: >> >> >> >> I have a huge customer running on an EdgeRouter Pro. They just had a >> > power outage and router went back to default. It's running v1.8.0. >> > Here is what I see in the CLI: >> >> >> >> >> >> >> >> >> >> Can I rename that invalid file to config.boot and it will work? Or do >> > I have to reconfigure from scratch? >> >> >> >> Thank you, >> >> Brett A Mansfield >> >> ___ >> >> Ubnt_users mailing list >> >> Ubnt_users@wispa.org >> >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > >> > ___ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> > ___ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > > -- > > > -- > Clay Stewart, COO/CTO > SCS Broadband > A Division of Acelanet, LLC > 434.263.6363 O > 434.942.6510 C > cstew...@scsbroadband.com > “We Keep You Up and Running” > > Please send sales inquiries to sa...@scsbroadband.com > Please send service/repair requests to supp...@scsbroadband.com > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -- Clay Stewart, COO/CTO SCS Broadband A Division of Acelanet, LLC 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
This one has been rebooted several times in the past without losing its config, but this power outage caused it to. It's not a lack of saving the running config. Thank you, Brett A Mansfield > On Nov 10, 2016, at 4:31 PM, Clay Stewart > wrote: > > Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards. > >> On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell >> wrote: >> You still have to click "Save configuration" after you've made changes >> on the pages. It usually flashes red if it hasn't been saved to memory. >> >> -Original Message- >> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> On Behalf Of Brett A Mansfield >> Sent: Thursday, November 10, 2016 2:25 PM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] EdgeRouter config not applied >> >> This is managed exclusively through the GUI. >> >> Thank you, >> Brett A Mansfield >> >> > On Nov 10, 2016, at 12:12 PM, Andy Trimmell >> wrote: >> > >> > Did someone make config changes but didn't "save configuration"? maybe >> >> > it was just on the running config. >> > >> > -Original Message- >> > From: ubnt_users-boun...@wispa.org >> > [mailto:ubnt_users-boun...@wispa.org] >> > On Behalf Of Brett A Mansfield >> > Sent: Thursday, November 10, 2016 2:09 PM >> > To: Ubiquiti Users Group >> > Subject: Re: [Ubnt_users] EdgeRouter config not applied >> > >> > Quick update, I changed config.boot to config.bootold and >> > config.boot.invalid.~ to config.boot and then rebooted. All is well >> now. >> > >> > Anyone have this happen before? Is there a way to prevent it besides >> > adding this to a battery backup? >> > >> > Thank you, >> > Brett A Mansfield >> > >> >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield >> > wrote: >> >> >> >> I have a huge customer running on an EdgeRouter Pro. They just had a >> > power outage and router went back to default. It's running v1.8.0. >> > Here is what I see in the CLI: >> >> >> >> >> >> >> >> >> >> Can I rename that invalid file to config.boot and it will work? Or do >> > I have to reconfigure from scratch? >> >> >> >> Thank you, >> >> Brett A Mansfield >> >> ___ >> >> Ubnt_users mailing list >> >> Ubnt_users@wispa.org >> >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > >> > ___ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> > ___ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > -- > > > -- > Clay Stewart, COO/CTO > SCS Broadband > A Division of Acelanet, LLC > 434.263.6363 O > 434.942.6510 C > cstew...@scsbroadband.com > “We Keep You Up and Running” > > Please send sales inquiries to sa...@scsbroadband.com > Please send service/repair requests to supp...@scsbroadband.com > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards. On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell wrote: > You still have to click "Save configuration" after you've made changes > on the pages. It usually flashes red if it hasn't been saved to memory. > > -Original Message- > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Brett A Mansfield > Sent: Thursday, November 10, 2016 2:25 PM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] EdgeRouter config not applied > > This is managed exclusively through the GUI. > > Thank you, > Brett A Mansfield > > > On Nov 10, 2016, at 12:12 PM, Andy Trimmell > wrote: > > > > Did someone make config changes but didn't "save configuration"? maybe > > > it was just on the running config. > > > > -Original Message- > > From: ubnt_users-boun...@wispa.org > > [mailto:ubnt_users-boun...@wispa.org] > > On Behalf Of Brett A Mansfield > > Sent: Thursday, November 10, 2016 2:09 PM > > To: Ubiquiti Users Group > > Subject: Re: [Ubnt_users] EdgeRouter config not applied > > > > Quick update, I changed config.boot to config.bootold and > > config.boot.invalid.~ to config.boot and then rebooted. All is well > now. > > > > Anyone have this happen before? Is there a way to prevent it besides > > adding this to a battery backup? > > > > Thank you, > > Brett A Mansfield > > > >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield > > wrote: > >> > >> I have a huge customer running on an EdgeRouter Pro. They just had a > > power outage and router went back to default. It's running v1.8.0. > > Here is what I see in the CLI: > >> > >> > >> > >> > >> Can I rename that invalid file to config.boot and it will work? Or do > > I have to reconfigure from scratch? > >> > >> Thank you, > >> Brett A Mansfield > >> ___ > >> Ubnt_users mailing list > >> Ubnt_users@wispa.org > >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > > Ubnt_users mailing list > > Ubnt_users@wispa.org > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- -- Clay Stewart, COO/CTO SCS Broadband A Division of Acelanet, LLC 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
You still have to click "Save configuration" after you've made changes on the pages. It usually flashes red if it hasn't been saved to memory. -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Brett A Mansfield Sent: Thursday, November 10, 2016 2:25 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] EdgeRouter config not applied This is managed exclusively through the GUI. Thank you, Brett A Mansfield > On Nov 10, 2016, at 12:12 PM, Andy Trimmell wrote: > > Did someone make config changes but didn't "save configuration"? maybe > it was just on the running config. > > -Original Message- > From: ubnt_users-boun...@wispa.org > [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Brett A Mansfield > Sent: Thursday, November 10, 2016 2:09 PM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] EdgeRouter config not applied > > Quick update, I changed config.boot to config.bootold and > config.boot.invalid.~ to config.boot and then rebooted. All is well now. > > Anyone have this happen before? Is there a way to prevent it besides > adding this to a battery backup? > > Thank you, > Brett A Mansfield > >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield > wrote: >> >> I have a huge customer running on an EdgeRouter Pro. They just had a > power outage and router went back to default. It's running v1.8.0. > Here is what I see in the CLI: >> >> >> >> >> Can I rename that invalid file to config.boot and it will work? Or do > I have to reconfigure from scratch? >> >> Thank you, >> Brett A Mansfield >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
This is managed exclusively through the GUI. Thank you, Brett A Mansfield > On Nov 10, 2016, at 12:12 PM, Andy Trimmell wrote: > > Did someone make config changes but didn't "save configuration"? maybe > it was just on the running config. > > -Original Message- > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Brett A Mansfield > Sent: Thursday, November 10, 2016 2:09 PM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] EdgeRouter config not applied > > Quick update, I changed config.boot to config.bootold and > config.boot.invalid.~ to config.boot and then rebooted. All is well now. > > Anyone have this happen before? Is there a way to prevent it besides > adding this to a battery backup? > > Thank you, > Brett A Mansfield > >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield > wrote: >> >> I have a huge customer running on an EdgeRouter Pro. They just had a > power outage and router went back to default. It's running v1.8.0. Here > is what I see in the CLI: >> >> >> >> >> Can I rename that invalid file to config.boot and it will work? Or do > I have to reconfigure from scratch? >> >> Thank you, >> Brett A Mansfield >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
Did someone make config changes but didn't "save configuration"? maybe it was just on the running config. -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Brett A Mansfield Sent: Thursday, November 10, 2016 2:09 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] EdgeRouter config not applied Quick update, I changed config.boot to config.bootold and config.boot.invalid.~ to config.boot and then rebooted. All is well now. Anyone have this happen before? Is there a way to prevent it besides adding this to a battery backup? Thank you, Brett A Mansfield > On Nov 10, 2016, at 12:00 PM, Brett A Mansfield wrote: > > I have a huge customer running on an EdgeRouter Pro. They just had a power outage and router went back to default. It's running v1.8.0. Here is what I see in the CLI: > > > > > Can I rename that invalid file to config.boot and it will work? Or do I have to reconfigure from scratch? > > Thank you, > Brett A Mansfield > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] EdgeRouter config not applied
Quick update, I changed config.boot to config.bootold and config.boot.invalid.~ to config.boot and then rebooted. All is well now. Anyone have this happen before? Is there a way to prevent it besides adding this to a battery backup? Thank you, Brett A Mansfield > On Nov 10, 2016, at 12:00 PM, Brett A Mansfield > wrote: > > I have a huge customer running on an EdgeRouter Pro. They just had a power > outage and router went back to default. It's running v1.8.0. Here is what I > see in the CLI: > > > > > Can I rename that invalid file to config.boot and it will work? Or do I have > to reconfigure from scratch? > > Thank you, > Brett A Mansfield > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] EdgeRouter config not applied
I have a huge customer running on an EdgeRouter Pro. They just had a power outage and router went back to default. It's running v1.8.0. Here is what I see in the CLI: Can I rename that invalid file to config.boot and it will work? Or do I have to reconfigure from scratch? Thank you, Brett A Mansfield___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users