Re: [Ubnt_users] EdgeRouter config not applied

2016-11-12 Thread Clay Stewart 
Figure this one out? I was think of a corrupted config file from surge.

On Thu, Nov 10, 2016 at 6:54 PM, Brett A Mansfield <
li...@silverlakeinternet.com> wrote:

> This one has been rebooted several times in the past without losing its
> config, but this power outage caused it to. It's not a lack of saving the
> running config.
>
> Thank you,
> Brett A Mansfield
>
> On Nov 10, 2016, at 4:31 PM, Clay Stewart <cstewart@
> stewartcomputerservices.com> wrote:
>
> Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards.
>
> On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell <atrimm...@precisionds.com>
> wrote:
>
>> You still have to click "Save configuration" after you've made changes
>> on the pages.  It usually flashes red if it hasn't been saved to memory.
>>
>> -Original Message-
>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
>> On Behalf Of Brett A Mansfield
>> Sent: Thursday, November 10, 2016 2:25 PM
>> To: Ubiquiti Users Group
>> Subject: Re: [Ubnt_users] EdgeRouter config not applied
>>
>> This is managed exclusively through the GUI.
>>
>> Thank you,
>> Brett A Mansfield
>>
>> > On Nov 10, 2016, at 12:12 PM, Andy Trimmell
>> <atrimm...@precisionds.com> wrote:
>> >
>> > Did someone make config changes but didn't "save configuration"? maybe
>>
>> > it was just on the running config.
>> >
>> > -Original Message-
>> > From: ubnt_users-boun...@wispa.org
>> > [mailto:ubnt_users-boun...@wispa.org]
>> > On Behalf Of Brett A Mansfield
>> > Sent: Thursday, November 10, 2016 2:09 PM
>> > To: Ubiquiti Users Group
>> > Subject: Re: [Ubnt_users] EdgeRouter config not applied
>> >
>> > Quick update, I changed config.boot to config.bootold and
>> > config.boot.invalid.~ to config.boot and then rebooted. All is well
>> now.
>> >
>> > Anyone have this happen before? Is there a way to prevent it besides
>> > adding this to a battery backup?
>> >
>> > Thank you,
>> > Brett A Mansfield
>> >
>> >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
>> > <li...@silverlakeinternet.com> wrote:
>> >>
>> >> I have a huge customer running on an EdgeRouter Pro. They just had a
>> > power outage and router went back to default. It's running v1.8.0.
>> > Here is what I see in the CLI:
>> >>
>> >> 
>> >>
>> >>
>> >> Can I rename that invalid file to config.boot and it will work? Or do
>> > I have to reconfigure from scratch?
>> >>
>> >> Thank you,
>> >> Brett A Mansfield
>> >> ___
>> >> Ubnt_users mailing list
>> >> Ubnt_users@wispa.org
>> >> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> >
>> > ___
>> > Ubnt_users mailing list
>> > Ubnt_users@wispa.org
>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>> > ___
>> > Ubnt_users mailing list
>> > Ubnt_users@wispa.org
>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>
>
>
> --
>
>
> --
> Clay Stewart, COO/CTO
> SCS Broadband
> A Division of Acelanet, LLC
>   434.263.6363 O
>   434.942.6510 C
>   cstew...@scsbroadband.com
> “We Keep You Up and Running”
>
> Please send sales inquiries to sa...@scsbroadband.com
> Please send service/repair requests to supp...@scsbroadband.com
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 


-- 
Clay Stewart, COO/CTO
SCS Broadband
A Division of Acelanet, LLC
  434.263.6363 O
  434.942.6510 C
  cstew...@scsbroadband.com
“We Keep You Up and Running”

Please send sales inquiries to sa...@scsbroadband.com
Please send service/repair requests to supp...@scsbroadband.com
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Brett A Mansfield 
This one has been rebooted several times in the past without losing its config, 
but this power outage caused it to. It's not a lack of saving the running 
config.

Thank you,
Brett A Mansfield

> On Nov 10, 2016, at 4:31 PM, Clay Stewart 
> <cstew...@stewartcomputerservices.com> wrote:
> 
> Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards.
> 
>> On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell <atrimm...@precisionds.com> 
>> wrote:
>> You still have to click "Save configuration" after you've made changes
>> on the pages.  It usually flashes red if it hasn't been saved to memory.
>> 
>> -Original Message-
>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
>> On Behalf Of Brett A Mansfield
>> Sent: Thursday, November 10, 2016 2:25 PM
>> To: Ubiquiti Users Group
>> Subject: Re: [Ubnt_users] EdgeRouter config not applied
>> 
>> This is managed exclusively through the GUI.
>> 
>> Thank you,
>> Brett A Mansfield
>> 
>> > On Nov 10, 2016, at 12:12 PM, Andy Trimmell
>> <atrimm...@precisionds.com> wrote:
>> >
>> > Did someone make config changes but didn't "save configuration"? maybe
>> 
>> > it was just on the running config.
>> >
>> > -Original Message-
>> > From: ubnt_users-boun...@wispa.org
>> > [mailto:ubnt_users-boun...@wispa.org]
>> > On Behalf Of Brett A Mansfield
>> > Sent: Thursday, November 10, 2016 2:09 PM
>> > To: Ubiquiti Users Group
>> > Subject: Re: [Ubnt_users] EdgeRouter config not applied
>> >
>> > Quick update, I changed config.boot to config.bootold and
>> > config.boot.invalid.~ to config.boot and then rebooted. All is well
>> now.
>> >
>> > Anyone have this happen before? Is there a way to prevent it besides
>> > adding this to a battery backup?
>> >
>> > Thank you,
>> > Brett A Mansfield
>> >
>> >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
>> > <li...@silverlakeinternet.com> wrote:
>> >>
>> >> I have a huge customer running on an EdgeRouter Pro. They just had a
>> > power outage and router went back to default. It's running v1.8.0.
>> > Here is what I see in the CLI:
>> >>
>> >> 
>> >>
>> >>
>> >> Can I rename that invalid file to config.boot and it will work? Or do
>> > I have to reconfigure from scratch?
>> >>
>> >> Thank you,
>> >> Brett A Mansfield
>> >> ___
>> >> Ubnt_users mailing list
>> >> Ubnt_users@wispa.org
>> >> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> >
>> > ___
>> > Ubnt_users mailing list
>> > Ubnt_users@wispa.org
>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>> > ___
>> > Ubnt_users mailing list
>> > Ubnt_users@wispa.org
>> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
> 
> 
> -- 
> 
> 
> -- 
> Clay Stewart, COO/CTO
> SCS Broadband
> A Division of Acelanet, LLC
>   434.263.6363 O 
>   434.942.6510 C
>   cstew...@scsbroadband.com 
> “We Keep You Up and Running” 
> 
> Please send sales inquiries to sa...@scsbroadband.com
> Please send service/repair requests to supp...@scsbroadband.com
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Clay Stewart 
Yeah, if you do CLI and do Commit, but forget to do SAVE afterwards.

On Thu, Nov 10, 2016 at 2:40 PM, Andy Trimmell <atrimm...@precisionds.com>
wrote:

> You still have to click "Save configuration" after you've made changes
> on the pages.  It usually flashes red if it hasn't been saved to memory.
>
> -Original Message-
> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> On Behalf Of Brett A Mansfield
> Sent: Thursday, November 10, 2016 2:25 PM
> To: Ubiquiti Users Group
> Subject: Re: [Ubnt_users] EdgeRouter config not applied
>
> This is managed exclusively through the GUI.
>
> Thank you,
> Brett A Mansfield
>
> > On Nov 10, 2016, at 12:12 PM, Andy Trimmell
> <atrimm...@precisionds.com> wrote:
> >
> > Did someone make config changes but didn't "save configuration"? maybe
>
> > it was just on the running config.
> >
> > -Original Message-
> > From: ubnt_users-boun...@wispa.org
> > [mailto:ubnt_users-boun...@wispa.org]
> > On Behalf Of Brett A Mansfield
> > Sent: Thursday, November 10, 2016 2:09 PM
> > To: Ubiquiti Users Group
> > Subject: Re: [Ubnt_users] EdgeRouter config not applied
> >
> > Quick update, I changed config.boot to config.bootold and
> > config.boot.invalid.~ to config.boot and then rebooted. All is well
> now.
> >
> > Anyone have this happen before? Is there a way to prevent it besides
> > adding this to a battery backup?
> >
> > Thank you,
> > Brett A Mansfield
> >
> >> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
> > <li...@silverlakeinternet.com> wrote:
> >>
> >> I have a huge customer running on an EdgeRouter Pro. They just had a
> > power outage and router went back to default. It's running v1.8.0.
> > Here is what I see in the CLI:
> >>
> >> 
> >>
> >>
> >> Can I rename that invalid file to config.boot and it will work? Or do
> > I have to reconfigure from scratch?
> >>
> >> Thank you,
> >> Brett A Mansfield
> >> ___
> >> Ubnt_users mailing list
> >> Ubnt_users@wispa.org
> >> http://lists.wispa.org/mailman/listinfo/ubnt_users
> >
> > ___
> > Ubnt_users mailing list
> > Ubnt_users@wispa.org
> > http://lists.wispa.org/mailman/listinfo/ubnt_users
> > ___
> > Ubnt_users mailing list
> > Ubnt_users@wispa.org
> > http://lists.wispa.org/mailman/listinfo/ubnt_users
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>



-- 


-- 
Clay Stewart, COO/CTO
SCS Broadband
A Division of Acelanet, LLC
  434.263.6363 O
  434.942.6510 C
  cstew...@scsbroadband.com
“We Keep You Up and Running”

Please send sales inquiries to sa...@scsbroadband.com
Please send service/repair requests to supp...@scsbroadband.com
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Andy Trimmell 
You still have to click "Save configuration" after you've made changes
on the pages.  It usually flashes red if it hasn't been saved to memory.

-Original Message-
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
On Behalf Of Brett A Mansfield
Sent: Thursday, November 10, 2016 2:25 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] EdgeRouter config not applied

This is managed exclusively through the GUI.

Thank you,
Brett A Mansfield

> On Nov 10, 2016, at 12:12 PM, Andy Trimmell
<atrimm...@precisionds.com> wrote:
> 
> Did someone make config changes but didn't "save configuration"? maybe

> it was just on the running config.
> 
> -Original Message-
> From: ubnt_users-boun...@wispa.org 
> [mailto:ubnt_users-boun...@wispa.org]
> On Behalf Of Brett A Mansfield
> Sent: Thursday, November 10, 2016 2:09 PM
> To: Ubiquiti Users Group
> Subject: Re: [Ubnt_users] EdgeRouter config not applied
> 
> Quick update, I changed config.boot to config.bootold and 
> config.boot.invalid.~ to config.boot and then rebooted. All is well
now.
> 
> Anyone have this happen before? Is there a way to prevent it besides 
> adding this to a battery backup?
> 
> Thank you,
> Brett A Mansfield
> 
>> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
> <li...@silverlakeinternet.com> wrote:
>> 
>> I have a huge customer running on an EdgeRouter Pro. They just had a
> power outage and router went back to default. It's running v1.8.0. 
> Here is what I see in the CLI:
>> 
>> 
>> 
>> 
>> Can I rename that invalid file to config.boot and it will work? Or do
> I have to reconfigure from scratch?
>> 
>> Thank you,
>> Brett A Mansfield
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Brett A Mansfield 
This is managed exclusively through the GUI.

Thank you,
Brett A Mansfield

> On Nov 10, 2016, at 12:12 PM, Andy Trimmell <atrimm...@precisionds.com> wrote:
> 
> Did someone make config changes but didn't "save configuration"? maybe
> it was just on the running config.
> 
> -Original Message-
> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> On Behalf Of Brett A Mansfield
> Sent: Thursday, November 10, 2016 2:09 PM
> To: Ubiquiti Users Group
> Subject: Re: [Ubnt_users] EdgeRouter config not applied
> 
> Quick update, I changed config.boot to config.bootold and
> config.boot.invalid.~ to config.boot and then rebooted. All is well now.
> 
> Anyone have this happen before? Is there a way to prevent it besides
> adding this to a battery backup?
> 
> Thank you,
> Brett A Mansfield
> 
>> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
> <li...@silverlakeinternet.com> wrote:
>> 
>> I have a huge customer running on an EdgeRouter Pro. They just had a
> power outage and router went back to default. It's running v1.8.0. Here
> is what I see in the CLI:
>> 
>> 
>> 
>> 
>> Can I rename that invalid file to config.boot and it will work? Or do
> I have to reconfigure from scratch?
>> 
>> Thank you,
>> Brett A Mansfield
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Andy Trimmell 
Did someone make config changes but didn't "save configuration"? maybe
it was just on the running config.

-Original Message-
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
On Behalf Of Brett A Mansfield
Sent: Thursday, November 10, 2016 2:09 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] EdgeRouter config not applied

Quick update, I changed config.boot to config.bootold and
config.boot.invalid.~ to config.boot and then rebooted. All is well now.

Anyone have this happen before? Is there a way to prevent it besides
adding this to a battery backup?

Thank you,
Brett A Mansfield

> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield
<li...@silverlakeinternet.com> wrote:
> 
> I have a huge customer running on an EdgeRouter Pro. They just had a
power outage and router went back to default. It's running v1.8.0. Here
is what I see in the CLI:
> 
> 
> 
> 
> Can I rename that invalid file to config.boot and it will work? Or do
I have to reconfigure from scratch?
> 
> Thank you,
> Brett A Mansfield
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] EdgeRouter config not applied

2016-11-10 Thread Brett A Mansfield 
Quick update, I changed config.boot to config.bootold and config.boot.invalid.~ 
to config.boot and then rebooted. All is well now.

Anyone have this happen before? Is there a way to prevent it besides adding 
this to a battery backup?

Thank you,
Brett A Mansfield

> On Nov 10, 2016, at 12:00 PM, Brett A Mansfield 
>  wrote:
> 
> I have a huge customer running on an EdgeRouter Pro. They just had a power 
> outage and router went back to default. It's running v1.8.0. Here is what I 
> see in the CLI:
> 
> 
> 
> 
> Can I rename that invalid file to config.boot and it will work? Or do I have 
> to reconfigure from scratch?
> 
> Thank you,
> Brett A Mansfield
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users