[Bug 1780452] Re: 14e4:43ba Broadcom BCM43602 doesn't see 5GHz APs

2018-07-18 Thread Alexander Skwar 
It was a "a Bionic install out of the box", ie. a fresh install.

At the moment, I cannot test with Mainline, sorry.

I suspect that an updated firmware is needed. If and when Broadcom
releases one...

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1780452

Title:
  14e4:43ba Broadcom BCM43602 doesn't see 5GHz APs

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780452/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1780452] Re: 14e4:43ba Broadcom BCM43602 doesn't see 5GHz APs

2018-07-07 Thread Alexander Skwar 
** Description changed:

- On a MackBookPro14,2 (2018 model), the wireless works with the brcmfmac
+ On a MacBookPro14,2 (2018 model), the wireless works with the brcmfmac
  on a Bionic install out of the box, but cannot see any APs on the 5GHz
  range, even though there are APs broadasting on 5GHz.
  
  $ sudo lspci -vnn -d 14e4:
  02:00.0 Network controller [0280]: Broadcom Limited BCM43602 802.11ac 
Wireless LAN SoC [14e4:43ba] (rev 02)
-   Subsystem: Apple Inc. BCM43602 802.11ac Wireless LAN SoC [106b:0157]
-   Flags: bus master, fast devsel, latency 0, IRQ 75
-   Memory at 8240 (64-bit, non-prefetchable) [size=32K]
-   Memory at 8200 (64-bit, non-prefetchable) [size=4M]
-   Capabilities: [48] Power Management version 3
-   Capabilities: [58] MSI: Enable+ Count=1/16 Maskable- 64bit+
-   Capabilities: [68] Vendor Specific Information: Len=44 
-   Capabilities: [ac] Express Endpoint, MSI 00
-   Capabilities: [100] Advanced Error Reporting
-   Capabilities: [13c] Device Serial Number 9b-95-98-ff-ff-03-f0-18
-   Capabilities: [150] Power Budgeting 
-   Capabilities: [160] Virtual Channel
-   Capabilities: [1b0] Latency Tolerance Reporting
-   Capabilities: [220] #15
-   Capabilities: [240] L1 PM Substates
-   Kernel driver in use: brcmfmac
-   Kernel modules: brcmfmac, wl
+  Subsystem: Apple Inc. BCM43602 802.11ac Wireless LAN SoC [106b:0157]
+  Flags: bus master, fast devsel, latency 0, IRQ 75
+  Memory at 8240 (64-bit, non-prefetchable) [size=32K]
+  Memory at 8200 (64-bit, non-prefetchable) [size=4M]
+  Capabilities: [48] Power Management version 3
+  Capabilities: [58] MSI: Enable+ Count=1/16 Maskable- 64bit+
+  Capabilities: [68] Vendor Specific Information: Len=44 
+  Capabilities: [ac] Express Endpoint, MSI 00
+  Capabilities: [100] Advanced Error Reporting
+  Capabilities: [13c] Device Serial Number 9b-95-98-ff-ff-03-f0-18
+  Capabilities: [150] Power Budgeting 
+  Capabilities: [160] Virtual Channel
+  Capabilities: [1b0] Latency Tolerance Reporting
+  Capabilities: [220] #15
+  Capabilities: [240] L1 PM Substates
+  Kernel driver in use: brcmfmac
+  Kernel modules: brcmfmac, wl
  
  $ sudo iwlist wlp2s0 scan | grep Freq
- Frequency:2.437 GHz (Channel 6)
- Frequency:2.412 GHz (Channel 1)
- Frequency:2.412 GHz (Channel 1)
- Frequency:2.462 GHz (Channel 11)
- Frequency:2.412 GHz (Channel 1)
- Frequency:2.462 GHz (Channel 11)
+ Frequency:2.437 GHz (Channel 6)
+ Frequency:2.412 GHz (Channel 1)
+ Frequency:2.412 GHz (Channel 1)
+ Frequency:2.462 GHz (Channel 11)
+ Frequency:2.412 GHz (Channel 1)
+ Frequency:2.462 GHz (Channel 11)
  
  Found bug reports
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1663711 and
  https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1487524,
  but there are no solutions for Bionic.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: linux-image-4.15.0-23-generic 4.15.0-23.25
  ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18
  Uname: Linux 4.15.0-23-generic x86_64
  NonfreeKernelModules: wl zfs zunicode zavl icp zcommon znvpair
  ApportVersion: 2.20.9-0ubuntu7.2
  Architecture: amd64
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  alex   3080 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  alex   3080 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Jul  6 16:43:32 2018
  InstallationDate: Installed on 2018-07-05 (1 days ago)
  InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426)
  MachineType: Apple Inc. MacBookPro14,2
  ProcEnviron:
-  TERM=xterm-256color
-  PATH=(custom, no user)
-  XDG_RUNTIME_DIR=
-  LANG=de_CH.UTF-8
-  SHELL=/bin/bash
+  TERM=xterm-256color
+  PATH=(custom, no user)
+  XDG_RUNTIME_DIR=
+  LANG=de_CH.UTF-8
+  SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-23-generic 
root=UUID=8c4cc8cd-f9a2-4e84-9e5e-0f7d6bb49a01 ro quiet splash vt.handoff=1
  RelatedPackageVersions:
-  linux-restricted-modules-4.15.0-23-generic N/A
-  linux-backports-modules-4.15.0-23-generic  N/A
-  linux-firmware 1.173.1
+  linux-restricted-modules-4.15.0-23-generic N/A
+  linux-backports-modules-4.15.0-23-generic  N/A
+  linux-firmware 1.173.1
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/09/2018
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBP142.88Z.0175.B00.1804091703
  dmi.board.name: Mac-CAD6701F7CEA0921
  dmi.board.vendor: Apple Inc.
  dmi.board.version: MacBookPro14,2
  dmi.chassis.type: 9
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version:

[Bug 1780452] [NEW] 14e4:43ba Broadcom BCM43602 doesn't see 5GHz APs

2018-07-06 Thread Alexander Skwar 
Public bug reported:

On a MackBookPro14,2 (2018 model), the wireless works with the brcmfmac
on a Bionic install out of the box, but cannot see any APs on the 5GHz
range, even though there are APs broadasting on 5GHz.

$ sudo lspci -vnn -d 14e4:
02:00.0 Network controller [0280]: Broadcom Limited BCM43602 802.11ac Wireless 
LAN SoC [14e4:43ba] (rev 02)
Subsystem: Apple Inc. BCM43602 802.11ac Wireless LAN SoC [106b:0157]
Flags: bus master, fast devsel, latency 0, IRQ 75
Memory at 8240 (64-bit, non-prefetchable) [size=32K]
Memory at 8200 (64-bit, non-prefetchable) [size=4M]
Capabilities: [48] Power Management version 3
Capabilities: [58] MSI: Enable+ Count=1/16 Maskable- 64bit+
Capabilities: [68] Vendor Specific Information: Len=44 
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Device Serial Number 9b-95-98-ff-ff-03-f0-18
Capabilities: [150] Power Budgeting 
Capabilities: [160] Virtual Channel
Capabilities: [1b0] Latency Tolerance Reporting
Capabilities: [220] #15
Capabilities: [240] L1 PM Substates
Kernel driver in use: brcmfmac
Kernel modules: brcmfmac, wl

$ sudo iwlist wlp2s0 scan | grep Freq
Frequency:2.437 GHz (Channel 6)
Frequency:2.412 GHz (Channel 1)
Frequency:2.412 GHz (Channel 1)
Frequency:2.462 GHz (Channel 11)
Frequency:2.412 GHz (Channel 1)
Frequency:2.462 GHz (Channel 11)

Found bug reports
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1663711 and
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1487524,
but there are no solutions for Bionic.

ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: linux-image-4.15.0-23-generic 4.15.0-23.25
ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18
Uname: Linux 4.15.0-23-generic x86_64
NonfreeKernelModules: wl zfs zunicode zavl icp zcommon znvpair
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  alex   3080 F pulseaudio
CurrentDesktop: ubuntu:GNOME
Date: Fri Jul  6 16:43:32 2018
InstallationDate: Installed on 2018-07-05 (1 days ago)
InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426)
MachineType: Apple Inc. MacBookPro14,2
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=de_CH.UTF-8
 SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-23-generic 
root=UUID=8c4cc8cd-f9a2-4e84-9e5e-0f7d6bb49a01 ro quiet splash vt.handoff=1
RelatedPackageVersions:
 linux-restricted-modules-4.15.0-23-generic N/A
 linux-backports-modules-4.15.0-23-generic  N/A
 linux-firmware 1.173.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/09/2018
dmi.bios.vendor: Apple Inc.
dmi.bios.version: MBP142.88Z.0175.B00.1804091703
dmi.board.name: Mac-CAD6701F7CEA0921
dmi.board.vendor: Apple Inc.
dmi.board.version: MacBookPro14,2
dmi.chassis.type: 9
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-CAD6701F7CEA0921
dmi.modalias: 
dmi:bvnAppleInc.:bvrMBP142.88Z.0175.B00.1804091703:bd04/09/2018:svnAppleInc.:pnMacBookPro14,2:pvr1.0:rvnAppleInc.:rnMac-CAD6701F7CEA0921:rvrMacBookPro14,2:cvnAppleInc.:ct9:cvrMac-CAD6701F7CEA0921:
dmi.product.family: MacBook Pro
dmi.product.name: MacBookPro14,2
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Confirmed


** Tags: amd64 apport-bug bionic

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1780452

Title:
  14e4:43ba Broadcom BCM43602 doesn't see 5GHz APs

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780452/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1589005] Re: After update DNS work unstable

2017-03-20 Thread Alexander Skwar 
See https://gist.github.com/alexs77/85de4198016b5a6c6b40548b9aa71867 for
a better readable version.

And I also forgot to add, that I do NOT have the "normal" full blown
dnsmasq package installed; only dnsmasq-base.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1589005

Title:
  After update DNS work unstable

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589005/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1589005] Re: After update DNS work unstable

2017-03-20 Thread Alexander Skwar 
I also seem to experience the same (or similar) issue. When I connect to
my companies Cisco ASA VPN using OpenConnect (in NetworkManager), it
seems that with network-manager after v1.2.2, the previously configured
DNS servers aren't overwritten with what VPN sends. Instead, those VPN
servers get appended to the list.

So, at first, before I connect to VPN, I only have one DNS server configured: 
192.168.42.129
Next, I connect to the VPN.

To see the effective list of DNS servers, I created the file
/etc/NetworkManager/dnsmasq.d/dnsmasq.conf, containing:

log-queries=extra
log-async=7

After a reboot, dnsmasq uses this settings. Now, when a USR1 signal is
send to dnsmasq, it'll print information to syslog.


With v1.2.2 (network-manager_1.2.2-0ubuntu0.16.04.4_amd64.deb):
$ tail -F /var/log/syslog &
# => Connect to Cisco VPN with OpenConnect
$ sudo pkill -USR1 dnsmasq

Mar 20 15:52:40 dns-issue-test dnsmasq[992]: time 1490021560
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: cache size 0, 0/0 cache insertions 
re-used unexpired cache entries.
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: queries forwarded 14, queries 
answered locally 1
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: queries for authoritative zones 0
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: server 192.168.251.6#53: queries 
sent 1, retried or failed 0
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: server 192.168.251.7#53: queries 
sent 7, retried or failed 0
Mar 20 15:52:40 dns-issue-test dnsmasq[992]: Host   
  AddressFlags  Expires


With v1.2.4 (network-manager_1.2.4-0ubuntu0.16.04.1_amd64.deb), I get
this:

$ sudo dpkg -i Downloads/network-manager_1.2.4-0ubuntu0.16.04.1_amd64.deb
$ sudo reboot

...

$ tail -F /var/log/syslog &
# => Connect to Cisco VPN with OpenConnect
$ sudo pkill -USR1 dnsmasq

Mar 20 15:56:42 dns-issue-test dnsmasq[976]: time 1490021802
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: cache size 0, 0/0 cache insertions 
re-used unexpired cache entries.
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: queries forwarded 14, queries 
answered locally 1
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: queries for authoritative zones 0
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: server 192.168.42.129#53: queries 
sent 5, retried or failed 0
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: server 192.168.251.6#53: queries 
sent 0, retried or failed 0
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: server 192.168.251.7#53: queries 
sent 0, retried or failed 0
Mar 20 15:56:42 dns-issue-test dnsmasq[976]: Host   
  AddressFlags  Expires


So, as can be seen, the two additional DNS servers 192.168.251.6 and 
192.168.251.7 just got added to the list of effective DNS servers. 
192.168.42.129 is still in the list.

With v1.2.2, the old DNS server (=> 192.168.42.129) was removed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1589005

Title:
  After update DNS work unstable

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589005/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1657134] Re: ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provided

2017-01-17 Thread Alexander Skwar 
This has helped.

local@ewserv-auth01-prod ~ % sudo systemctl reload-or-try-restart
oddjobd

local@ewserv-auth01-prod ~ % dbus-send --system --dest=org.freedesktop.DBus 
--type=method_call --print-reply /org/freedesktop/DBus 
org.freedesktop.DBus.ListNames
method return time=1484671935.066180 sender=org.freedesktop.DBus -> 
destination=:1.22 serial=3 reply_serial=2
   array [
  string "org.freedesktop.DBus"
  string "org.freedesktop.login1"
  string "org.fedorahosted.certmonger"
  string ":1.8"
  string "org.freedesktop.systemd1"
  string ":1.20"
  string "com.redhat.oddjob"
  string "com.redhat.oddjob_mkhomedir"
  string ":1.21"
  string ":1.22"
  string ":1.11"
  string ":1.12"
  string ":1.0"
  string ":1.1"
  string ":1.2"
  string "org.freeipa.server"
  string "org.freedesktop.Accounts"
  string ":1.19"
   ]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1657134

Title:
  ipa-replica-install fails: "an internal error has occurred" on Remote
  master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The
  name org.freeipa.server was not provided by any .service files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1657134] Re: ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provided

2017-01-17 Thread Alexander Skwar 
No difference.

local@ewserv-auth01-prod ~ % dbus-send --system --dest=org.freedesktop.DBus 
--type=method_call --print-reply /org/freedesktop/DBus 
org.freedesktop.DBus.ListNames
method return time=1484670866.341799 sender=org.freedesktop.DBus -> 
destination=:1.15 serial=3 reply_serial=2
   array [
  string "org.freedesktop.DBus"
  string "org.freedesktop.login1"
  string "org.fedorahosted.certmonger"
  string ":1.8"
  string "org.freedesktop.systemd1"
  string "com.redhat.oddjob"
  string "com.redhat.oddjob_mkhomedir"
  string ":1.11"
  string ":1.12"
  string ":1.0"
  string ":1.1"
  string ":1.15"
  string ":1.2"
  string "org.freedesktop.Accounts"
  string ":1.5"
  string ":1.6"
   ]


local@ewserv-auth01-prod ~ % sudo systemctl reload-or-try-restart dbus

local@ewserv-auth01-prod ~ % dbus-send --system --dest=org.freedesktop.DBus 
--type=method_call --print-reply /org/freedesktop/DBus 
org.freedesktop.DBus.ListNames
method return time=1484670876.464901 sender=org.freedesktop.DBus -> 
destination=:1.17 serial=3 reply_serial=2
   array [
  string "org.freedesktop.DBus"
  string "org.freedesktop.login1"
  string "org.fedorahosted.certmonger"
  string ":1.8"
  string "org.freedesktop.systemd1"
  string "com.redhat.oddjob"
  string "com.redhat.oddjob_mkhomedir"
  string ":1.11"
  string ":1.12"
  string ":1.0"
  string ":1.1"
  string ":1.2"
  string ":1.17"
  string "org.freedesktop.Accounts"
  string ":1.5"
  string ":1.6"
   ]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1657134

Title:
  ipa-replica-install fails: "an internal error has occurred" on Remote
  master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The
  name org.freeipa.server was not provided by any .service files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1657134] Re: ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provided

2017-01-17 Thread Alexander Skwar 
** Attachment added: "sudo /usr/sbin/ipa-replica-conncheck 
--master=192.168.251.51"
   
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+attachment/4805348/+files/replica-master-conncheck.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1657134

Title:
  ipa-replica-install fails: "an internal error has occurred" on Remote
  master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The
  name org.freeipa.server was not provided by any .service files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1657134] Re: ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provided

2017-01-17 Thread Alexander Skwar 
** Attachment added: "ipa-replica-install.log.txt"
   
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+attachment/4805349/+files/ipa-replica-install.log.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1657134

Title:
  ipa-replica-install fails: "an internal error has occurred" on Remote
  master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The
  name org.freeipa.server was not provided by any .service files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1657134] [NEW] ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provide

2017-01-17 Thread Alexander Skwar 
Public bug reported:

Using freeipa 4.3.1-0ubuntu1 on Ubuntu 16.04 servers.

I have setup a FreeIPA master server with the following commands:

apt install freeipa-server

ipa-server-install --setup-dns --mkhomedir --auto-forwarders \
  --no-reverse --hostname=ewserv-auth01-prod.unix.ewadmin.ch \
  --ip-address=192.168.251.51 \
  --ds-password='dspassword' --admin-password='adminpassword' \
  --realm=UNIX.EWADMIN.CH --domain=unix.ewadmin.ch \
  --unattended

On a different server, I'm now trying to setup a replica. The
connection tests are good, see replica-master-conncheck.txt and
master-replica-conncheck.txt.

But ipa-replica-install fails (see ipa-replica-install.log.txt):

$ sudo ipa-replica-install -P admin -w adminpassword 
--domain=unix.ewadmin.ch --server=ewserv-auth01-prod.unix.ewadmin.ch 
--realm=UNIX.EWADMIN.CH --hostname=ewserv-auth02-prod.unix.ewadmin.ch
…
Client configuration complete.

Run connection check to master
Removing client side components
Unenrolling client from IPA server
…
ipa.ipapython.install.cli.install_tool(Replica): ERRORConnection check 
failed!
Please fix your network settings according to error messages above.
If the check results are not valid it can be skipped with --skip-conncheck 
parameter.
ipa.ipapython.install.cli.install_tool(Replica): ERRORThe 
ipa-replica-install command failed. See /var/log/ipareplica-install.log for 
more information

In /var/log/ipareplica-install.log (attached as well), I find:

[…]
   Kerberos Kpasswd: UDP (464): SKIPPED

Connection from replica to master is OK. 
Start listening on required ports for remote master check   
 
Get credentials to log in to remote master
Check RPC connection to remote master
Execute check on remote master

2017-01-17T14:48:00Z DEBUG stderr=Remote master check failed with following 
error message(s):
an internal error has occurred

2017-01-17T14:48:00Z DEBUG Starting external process
2017-01-17T14:48:00Z DEBUG args=/usr/sbin/ipa-client-install --unattended 
--uninstall
2017-01-17T14:48:06Z DEBUG Process finished, return code=0
[…]

In /var/log/apache2/error.log, I find an error:

[Tue Jan 17 16:06:05.825724 2017] [wsgi:error] [pid 21773:tid 
139626190206720] ipa: INFO: [jsonserver_kerb] ad...@unix.ewadmin.ch: 
ping(version=u'2.164'): SUCCESS
ERROR:dbus.proxies:Introspect error on org.freeipa.server:/: 
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The 
name org.freeipa.server was not provided by any .service files
[Tue Jan 17 16:06:05.941909 2017] [wsgi:error] [pid 21772:tid 
139626190206720] ipa: ERROR: non-public: DBusException: 
org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not 
provided by any .service files
[Tue Jan 17 16:06:05.942141 2017] [wsgi:error] [pid 21772:tid 
139626190206720] Traceback (most recent call last):
[Tue Jan 17 16:06:05.942325 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File 
"/usr/lib/python2.7/dist-packages/ipaserver/rpcserver.py", line 350, in 
wsgi_execute
[Tue Jan 17 16:06:05.942543 2017] [wsgi:error] [pid 21772:tid 
139626190206720] result = self.Command[name](*args, **options)
[Tue Jan 17 16:06:05.942946 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File "/usr/lib/python2.7/dist-packages/ipalib/frontend.py", 
line 446, in __call__
[Tue Jan 17 16:06:05.944110 2017] [wsgi:error] [pid 21772:tid 
139626190206720] ret = self.run(*args, **options)
[Tue Jan 17 16:06:05.944272 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File "/usr/lib/python2.7/dist-packages/ipalib/frontend.py", 
line 763, in run
[Tue Jan 17 16:06:05.944459 2017] [wsgi:error] [pid 21772:tid 
139626190206720] return self.execute(*args, **options)
[Tue Jan 17 16:06:05.944638 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File 
"/usr/lib/python2.7/dist-packages/ipalib/plugins/server.py", line 247, in 
execute
[Tue Jan 17 16:06:05.944825 2017] [wsgi:error] [pid 21772:tid 
139626190206720] ret, stdout, stderr = server.conncheck(keys[-1])
[Tue Jan 17 16:06:05.945075 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", 
line 70, in __call__
[Tue Jan 17 16:06:05.945245 2017] [wsgi:error] [pid 21772:tid 
139626190206720] return self._proxy_method(*args, **keywords)
[Tue Jan 17 16:06:05.945394 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", 
line 145, in __call__
[Tue Jan 17 16:06:05.945567 2017] [wsgi:error] [pid 21772:tid 
139626190206720] **keywords)
[Tue Jan 17 16:06:05.945734 2017] [wsgi:error] [pid 21772:tid 
139626190206720]   File "/usr/lib/python2.7/dist-packages/dbus/connection.py", 
line 651, in call_blocking
[Tue Jan 17 16:06:05.945914

[Bug 1657134] Re: ipa-replica-install fails: "an internal error has occurred" on Remote master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freeipa.server was not provided

2017-01-17 Thread Alexander Skwar 
** Attachment added: "/usr/sbin/ipa-replica-conncheck --replica 
ewserv-auth02-prod.unix.ewadmin.ch"
   
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+attachment/4805347/+files/master-replica-conncheck.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1657134

Title:
  ipa-replica-install fails: "an internal error has occurred" on Remote
  master - DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The
  name org.freeipa.server was not provided by any .service files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1657134/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1656236] [NEW] OpenSans TTF fonts missing

2017-01-13 Thread Alexander Skwar 
Public bug reported:

While loading the freeipa 4.3.1-0ubuntu1 web ui (=>
https://server/ipa/ui/) in Chrome, I see that it tries to load the
following font files, but only gets a 404:

OpenSans-Light.ttf OpenSans-Semibold.ttf OpenSans-Italic.ttf OpenSans-
Bold.ttf OpenSans-Regular.ttf

They are not present on my Xenial server.

$ sudo find / -name "Open*ttf"
$

The Ubuntu package search also doesn't list good choices for packages to
depend on: http://packages.ubuntu.com/search?searchon=contents
=OpenSans-Regular.ttf==xenial=any

** Affects: freeipa (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: "freeIPA-fonts-missing screenshot Chrome dev tools"
   
https://bugs.launchpad.net/bugs/1656236/+attachment/4803774/+files/freeIPA-fonts-missing.png

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1656236

Title:
  OpenSans TTF fonts missing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipa/+bug/1656236/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1616905] [NEW] lightdm install prompts about default dm even though debconf value set

2016-08-25 Thread Alexander Skwar 
Public bug reported:

I've got gdm3-3.18.3-0ubuntu2 installed on a Xenial 16.04 system with
apt. Now I need to install lightdm-1.18.2-0ubuntu2 as well and also need
to avoid being asked any questions. But the system asks me, what default
DM (display manager) to use.

Copying from Bug #1020770, I set some values with debconf.

$ echo "debconf debconf/priority select critical
lightdm shared/default-x-display-manager select lightdm
gdm3 shared/default-x-display-manager select lightdm" | sudo 
debconf-set-selections -v
info: Trying to set 'debconf/priority' [select] to 'critical'
info: Loading answer for 'debconf/priority'
info: Trying to set 'shared/default-x-display-manager' [select] to 'lightdm'
info: Loading answer for 'shared/default-x-display-manager'
info: Trying to set 'shared/default-x-display-manager' [select] to 'lightdm'
info: Loading answer for 'shared/default-x-display-manager'


When I now install lightdm (or reconfigure it), it is ignoring that I
set the value to "lightdm". I confirmed that by having a look at
/etc/X11/default-display-manager:

$ cat /etc/X11/default-display-manager
/usr/sbin/gdm3

When I manually answer the DM question and give "lightdm" as the answer,
the file contains "/usr/sbin/lightdm".


dpkg-reconfigure in non-interactive mode:

$ sudo env DEBCONF_DEBUG=developer dpkg-reconfigure -fnoninteractive lightdm
debconf (developer): starting /var/lib/dpkg/info/lightdm.prerm upgrade 
1.18.2-0ubuntu2
debconf (developer): starting /var/lib/dpkg/info/lightdm.config reconfigure 
1.18.2-0ubuntu2
debconf (developer): <-- METAGET shared/default-x-display-manager owners
debconf (developer): --> 0 gdm, gdm3, lightdm, slim
debconf (developer): <-- METAGET shared/default-x-display-manager choices
debconf (developer): --> 0 gdm, gdm3, lightdm, slim
debconf (developer): <-- SET shared/default-x-display-manager gdm3
debconf (developer): --> 0 value set
debconf (developer): <-- INPUT high shared/default-x-display-manager
debconf (developer): --> 30 question skipped
debconf (developer): <-- GO 
debconf (developer): --> 0 ok
debconf (developer): <-- GET shared/default-x-display-manager
debconf (developer): --> 0 gdm3
debconf (developer): starting /var/lib/dpkg/info/lightdm.postinst configure 
1.18.2-0ubuntu2
debconf (developer): <-- STOP


And in interactive mode:

$ sudo env DEBCONF_DEBUG=developer dpkg-reconfigure lightdm
debconf (developer): starting /var/lib/dpkg/info/lightdm.prerm upgrade 
1.18.2-0ubuntu2
debconf (developer): starting /var/lib/dpkg/info/lightdm.config reconfigure 
1.18.2-0ubuntu2
debconf (developer): <-- METAGET shared/default-x-display-manager owners
debconf (developer): --> 0 gdm, gdm3, lightdm, slim
debconf (developer): <-- METAGET shared/default-x-display-manager choices
debconf (developer): --> 0 gdm, gdm3, lightdm, slim
debconf (developer): <-- SET shared/default-x-display-manager gdm3
debconf (developer): --> 0 value set
debconf (developer): <-- INPUT high shared/default-x-display-manager
debconf (developer): --> 0 question will be asked
debconf (developer): <-- GO 
debconf (developer): --> 0 ok
debconf (developer): <-- GET shared/default-x-display-manager
debconf (developer): --> 0 lightdm
debconf (developer): starting /var/lib/dpkg/info/lightdm.postinst configure 
1.18.2-0ubuntu2
debconf (developer): <-- GET shared/default-x-display-manager
debconf (developer): --> 0 lightdm
debconf (developer): <-- GET lightdm/daemon_name
debconf (developer): --> 0 /usr/sbin/lightdm
debconf (developer): <-- STOP


To me, this is a bug in lightdm (or gdm3, which has the same code and
problem), because it doesn't seem to honor the values set with debconf
and thus makes it impossible to install without having to manually
answer questions.

** Affects: gdm (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: lightdm (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: lightdm (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1616905

Title:
  lightdm install prompts about default dm even though debconf value set

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/1616905/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1520906] Re: nautilus segfault with gnome-session-wayland

2016-04-24 Thread Alexander Skwar 
Same for me with Xenial "final".

~/ gdb nautilus
GNU gdb (Ubuntu 7.11-0ubuntu1) 7.11
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
.
Find the GDB manual and other documentation resources online at:
.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from nautilus...Reading symbols from 
/usr/lib/debug//usr/bin/nautilus...done.
done.
(gdb) run
Starting program: /usr/bin/nautilus 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe8af4700 (LWP 6969)]
[New Thread 0x7fffe3fff700 (LWP 6970)]
[New Thread 0x7fffe37fe700 (LWP 6971)]
[New Thread 0x7fffe2997700 (LWP 6972)]

Thread 1 "nautilus" received signal SIGSEGV, Segmentation fault.
0x7585450a in XInternAtom () from /usr/lib/x86_64-linux-gnu/libX11.so.6
(gdb) quit

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1520906

Title:
  nautilus segfault with gnome-session-wayland

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1520906/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1328117] Re: libc-icap-mod-virus-scan news modules

2014-11-18 Thread Alexander Skwar 
Why is the updated package not installed on trusty?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1328117

Title:
   libc-icap-mod-virus-scan news modules

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/c-icap-modules/+bug/1328117/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 885251] [NEW] Don't display a thousands seperator in binary mode

2011-11-02 Thread Alexander Skwar 
Public bug reported:

I switched to programmers mode in gcalctool and also enabled in prefs, that a 
thousands seperator is to be shown.
I then switch to binary mode.

Now I entered a number: 001
It's displayed as: 1'111'001

Ie. every 3 digits, a thousands seperator (the ' in my case) is added.

For binary mode, this doesn't make much sense. Instead, it would be
useful, if every 4 digits a space would be added. Just like it's done in
the display above the keys.

ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: gcalctool 6.2.0-0ubuntu1
ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
Uname: Linux 3.0.0-12-generic x86_64
ApportVersion: 1.23-0ubuntu3
Architecture: amd64
Date: Wed Nov  2 15:13:00 2011
ExecutablePath: /usr/bin/gcalctool
InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1)
SourcePackage: gcalctool
UpgradeStatus: Upgraded to oneiric on 2011-10-18 (15 days ago)

** Affects: gcalctool (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug apport-lpi oneiric running-unity

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/885251

Title:
  Don't display a thousands seperator in binary mode

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/885251/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 885251] Re: Don't display a thousands seperator in binary mode

2011-11-02 Thread Alexander Skwar 
** Attachment added: Thousands seperator shown, even in binary mode
   
https://bugs.launchpad.net/bugs/885251/+attachment/2583120/+files/gcalctool-thousands-separtor-in-binary-mode.png

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/885251

Title:
  Don't display a thousands seperator in binary mode

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcalctool/+bug/885251/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 859446] [NEW] Doesn't show up in rhythmbox - must be upgraded

2011-09-26 Thread Alexander Skwar 
Public bug reported:

I had installed on Natty:


ask@ewzw032:~/bin$ dpkg --status rhythmbox-radio-browser 
Package: rhythmbox-radio-browser
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 324
Maintainer: Ubuntu Developers ubuntu-devel-disc...@lists.ubuntu.com
Architecture: all
Version: 2.3.1-0ubuntu1
Depends: rhythmbox, streamripper, gstreamer0.10-plugins-bad, python
Description: Internet radio browser plugin for rhythmbox
 Rhythmbox plugin that shows the radio station lists
 of icecast (dir.xiph.org) and shoutcast directly in rhythmbox.
 So the user can easily search for internet radio stations
 in rhythmbox and play them. It has also support for streamripper,
 so streams can be recorded too.
Homepage: http://programmierecke.net/programmed/
Original-Maintainer: Alexander Murauer segler_a...@web.de


After enabling this plugin in rhythmbox, NOTHING showed up in the rhythmbox 
interface; on the terminal from where I started rhythmbox, I saw:


(rhythmbox:6948): GLib-GObject-CRITICAL **: g_object_set_qdata: assertion 
`G_IS_OBJECT (object)' failed
Traceback (most recent call last):
  File /usr/lib/rhythmbox/plugins/radio-browser/radio-browser.py, line 191, 
in deactivate
try:
AttributeError: 'RadioBrowserPlugin' object has no attribute 'actiongroup'


I guess that is a known problem, because on the News page of the coder at 
http://www.programmierecke.net/programmed/rhythmbox-radio-browser.html#News, 
you can find:


works in rhythmbox 0.13.3


rhythmbox 0.13.3 is what is shipped with Natty.

** Affects: rhythmbox-radio-browser (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/859446

Title:
  Doesn't show up in rhythmbox - must be upgraded

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhythmbox-radio-browser/+bug/859446/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 859446] Re: Doesn't show up in rhythmbox - must be upgraded

2011-09-26 Thread Alexander Skwar 
I then updated to what can be found on http://ppa.launchpad.net/segler-
alex/ppa/ubuntu/dists/natty/:


Package: rhythmbox-radio-browser
Priority: optional
Section: sound
Installed-Size: 332
Maintainer: Alexander Murauer segler_a...@web.de
Architecture: all
Version: 2.4-1~natty1
Depends: gconf2 (= 2.28.1-2), rhythmbox, streamripper, 
gstreamer0.10-plugins-bad, python
Filename: 
pool/main/r/rhythmbox-radio-browser/rhythmbox-radio-browser_2.4-1~natty1_all.deb
Size: 51644
MD5sum: 491a9173d4bd22690357df9e5d78d6d1
SHA1: 172b68d85c6b32c6d9437d1e405cf1816b00d619
Description: Internet radio browser plugin for rhythmbox
 Rhythmbox plugin that shows the radio station lists
 of icecast (http://dir.xiph.org), radiotime (http://www.radiotime.com)
 and Radio-Browser (http://www.radio-browser.info) directly in rhythmbox.
 So the user can easily search for internet radio stations
 in rhythmbox and play them. It has also support for streamripper,
 so streams can be recorded too.
Original-Maintainer: Alexander Murauer segler_a...@web.de


With this version, the plugin works just fine.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/859446

Title:
  Doesn't show up in rhythmbox - must be upgraded

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rhythmbox-radio-browser/+bug/859446/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 51613] Re: Duplication of code in /etc/acpi/powerbtn.sh from /usr/share/acpi-support/policy-funcs

2007-06-30 Thread Alexander Skwar 
I'm no longer using Ubuntu.

-- 
Duplication of code in /etc/acpi/powerbtn.sh from 
/usr/share/acpi-support/policy-funcs
https://bugs.launchpad.net/bugs/51613
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 51536] Re: System shuts down after Power Button press, even if dialog is cancelled

2007-06-13 Thread Alexander Skwar 
I'm no longer using Ubuntu. Because of this, I cannot check. Sorry.

-- 
System shuts down after Power Button press, even if dialog is cancelled
https://bugs.launchpad.net/bugs/51536
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53163] Re: Sound very jerky with 2.6.15-26 kernel and modules

2007-06-11 Thread Alexander Skwar 
I'm no longer an Ubuntu user. So I cannot say, if the system would still
malfunction with the current release of Ubuntu.

-- 
Sound very jerky with 2.6.15-26 kernel and modules
https://bugs.launchpad.net/bugs/53163
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 52459] Re: nautilus-sendto crashes right after starting the program

2006-08-24 Thread Alexander Skwar 
*** This bug is a duplicate of bug 41915 ***

Bug 347059 on Gnome has been duped to bug# 348941

** Changed in: nautilus-sendto (upstream)
 Bugwatch: GNOME Bug Tracker #347059 = GNOME Bug Tracker #348941
   Status: Rejected = Unknown

-- 
nautilus-sendto crashes right after starting the program
https://launchpad.net/bugs/52459

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices

2006-08-16 Thread Alexander Skwar 
David,

be pragmatic - install it, and if it boots, all is well. If not, simply
boot the old kernel (which is still there!) and remove the newly
installed kernel.

-- 
VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices
https://launchpad.net/bugs/52649

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 52649] Re: After installing the latest Linux kernel with Update Manager, Gnome start not normal.

2006-08-06 Thread Alexander Skwar 
If the -26 kernel should be the default kernel of Dapper.1, then yes,
this should be a blocker, as this kernel is unusable for me and it seems
quite some more people.

If, however, the -25 kernel is default: Then go ahead with Dapper.1.

My 2 cents.

-- 
After installing the latest Linux kernel with Update Manager, Gnome start not 
normal.
https://launchpad.net/bugs/52649

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 55332] Nautilus causes NFS problems

2006-08-05 Thread Alexander Skwar 
Public bug reported:

Binary package hint: nautilus

I've got a Linkstation 2 MIPS NAS system where I installed the nfs-
kernel-server from Debian on. When I use Nautilus to browse a folder
containing images and enable that previews should be generated, I'm
getting A LOT of messages like this on my client:

Aug  5 19:11:38 knospe kernel: [17183296.172000] nfs: server hd not
responding, timed out

knospe is the name of my client; hd is the name of the NFS server.

When I use tar on the shell, I can read as much as I want.

I'm using

nautilus   2.14.3-0ubuntu1

on Ubuntu Dapper.

I reported this upstream at
http://bugzilla.gnome.org/show_bug.cgi?id=350084

** Affects: nautilus (upstream)
 Importance: Unknown
 Status: Unknown
** Affects: nautilus (Ubuntu)
 Importance: Untriaged
 Status: Unconfirmed

-- 
Nautilus causes NFS problems
https://launchpad.net/bugs/55332

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 55332] Re: Nautilus causes NFS problems

2006-08-05 Thread Alexander Skwar 
** Bug watch added: GNOME Bug Tracker #350084
   http://bugzilla.gnome.org/show_bug.cgi?id=350084

** Also affects: nautilus (upstream) via
   http://bugzilla.gnome.org/show_bug.cgi?id=350084
   Importance: Unknown
   Status: Unknown

-- 
Nautilus causes NFS problems
https://launchpad.net/bugs/55332

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53728] Re: Cannot load ath_pci from madwifi

2006-07-24 Thread Alexander Skwar 
After running sudo depmod -a, I was able to modprobe ath_pci. This
also worked after a reboot.

-- 
Cannot load ath_pci from madwifi
https://launchpad.net/bugs/53728

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53819] Image cannot be imported

2006-07-23 Thread Alexander Skwar 
Public bug reported:

Binary package hint: f-spot

When I try to import a folder containing JPEGs into f-spot 0.1.11 on
Ubuntu Dapper 6.06, I find that some images cannot be imported. In the
terminal, I see:

Error importing /home/alexander/Desktop/Bilder/Auf Website/Cassandra/Cassandra 
(34)/04. Mai 2005/[2005-05-27 10-36-01] (1245) Cassandra, Auf Stillkissen, 
Couch, Wohnzimmer, Zu Hause.jpg
System.ArgumentNullException: Argument cannot be null.
Parameter name: src
in 0x0 unknown method
in (wrapper managed-to-native) 
System.Runtime.InteropServices.Marshal:copy_from_unmanaged 
(intptr,int,System.Array,int)
in 0x00013 System.Runtime.InteropServices.Marshal:Copy (IntPtr source, 
System.Byte[] destination, Int32 startIndex, Int32 length)
in 0x00050 Exif.ExifEntry:get_Data ()
in 0x00054 FSpot.JpegFile:get_Description ()
in 0x0006d PhotoStore:Create (System.String newPath, System.String origPath, 
Gdk.Pixbuf thumbnail)
in 0x00013 PhotoStore:Create (System.String path, Gdk.Pixbuf thumbnail)
in 0x000fe FileImportBackend:Step (.Photo photo, Gdk.Pixbuf thumbnail, 
System.Int32 count)
Could not import file

I'll attach the image to this bug.

I reported this upstream as well; see
http://bugzilla.gnome.org/show_bug.cgi?id=348446

** Affects: f-spot (Ubuntu)
 Importance: Untriaged
 Status: Unconfirmed

-- 
Image cannot be imported
https://launchpad.net/bugs/53819

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53819] Re: Image cannot be imported

2006-07-23 Thread Alexander Skwar 
This image was stored at /home/alexander/Desktop/Bilder/Auf
Website/Cassandra/Cassandra (34)/04. Mai 2005/[2005-05-27 10-36-01]
(1245) Cassandra, Auf Stillkissen, Couch, Wohnzimmer, Zu Hause.jpg

/home/alexander/Desktop/Bilder/Auf Website/Cassandra/Cassandra (34)/04.
Mai 2005/ is a NFS mount. Other files from this mountpoint and even this
directory could be imported just fine.

-- 
Image cannot be imported
https://launchpad.net/bugs/53819

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53728] Cannot load ath_pci from madwifi

2006-07-22 Thread Alexander Skwar 
Public bug reported:

Binary package hint: linux-restricted-modules-2.6.15-26-686

With linux-image-2.6.15-26-686_2.6.15-26.45, I'm unable to modprobe
ath_pci. When I do so, I get:


[EMAIL PROTECTED]:~/tmp$ sudo modprobe -v ath_pci
Password:
insmod /lib/modules/2.6.15-26-686/madwifi/ath_rate_sample.ko
WARNING: Error inserting ath_rate_sample 
(/lib/modules/2.6.15-26-686/madwifi/ath_rate_sample.ko): Unknown symbol in 
module, or unknown parameter (see dmesg)
insmod /lib/modules/2.6.15-26-686/madwifi/ath_pci.ko
FATAL: Error inserting ath_pci (/lib/modules/2.6.15-26-686/madwifi/ath_pci.ko): 
Unknown symbol in module, or unknown parameter (see dmesg)

In dmesg, there's:

[17179725.368000] ath_rate_sample: Unknown symbol ath_hal_computetxtime
[17179725.368000] ath_pci: Unknown symbol ath_rate_tx_complete
[17179725.368000] ath_pci: Unknown symbol _ath_hal_attach
[17179725.368000] ath_pci: Unknown symbol ath_rate_attach
[17179725.372000] ath_pci: Unknown symbol ath_rate_newassoc
[17179725.372000] ath_pci: Unknown symbol ath_hal_computetxtime
[17179725.372000] ath_pci: Unknown symbol ath_rate_dynamic_sysctl_register
[17179725.372000] ath_pci: Unknown symbol ath_hal_mhz2ieee
[17179725.372000] ath_pci: Unknown symbol ath_hal_detach
[17179725.372000] ath_pci: Unknown symbol ath_hal_probe
[17179725.372000] ath_pci: Unknown symbol ath_rate_node_cleanup
[17179725.372000] ath_pci: Unknown symbol ath_rate_detach
[17179725.372000] ath_pci: Unknown symbol ath_rate_node_init
[17179725.372000] ath_pci: Unknown symbol ath_rate_findrate
[17179725.372000] ath_pci: Unknown symbol ath_hal_init_channels
[17179725.388000] ath_pci: Unknown symbol ath_rate_newstate
[17179725.388000] ath_pci: Unknown symbol ath_rate_setupxtxdesc
[17179725.388000] ath_pci: Unknown symbol ath_hal_getwirelessmodes

** Affects: linux-restricted-modules-2.6.15 (Ubuntu)
 Importance: Untriaged
 Status: Unconfirmed

-- 
Cannot load ath_pci from madwifi
https://launchpad.net/bugs/53728

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53728] Re: Cannot load ath_pci from madwifi - volatile directory not searched by modprobe

2006-07-22 Thread Alexander Skwar 
The problem is, that the ath_hal module isn't loaded. In 2.6.15-25,
doing modprobe ath_pci would load ath_hal as well and all was fine.
Not so with the current kernel.

[EMAIL PROTECTED]:~$ sudo modprobe -v ath_hal
FATAL: Module ath_hal not found.

Hm, why's that?

[EMAIL PROTECTED]:~$ ls -la /lib/modules/`uname -r`/volatile/
insgesamt 18317
drwxr-xr-x 2 root root 400 2006-07-23 00:21 .
drwxr-xr-x 7 root root 568 2006-07-22 15:50 ..
-rw-r--r-- 1 root root  165272 2006-07-23 00:20 ath_hal.ko
-rw-r--r-- 1 root root  815000 2006-07-23 00:20 fcdsl2.ko
-rw-r--r-- 1 root root  890384 2006-07-23 00:20 fcdsl.ko
-rw-r--r-- 1 root root  815081 2006-07-23 00:21 fcdslsl.ko
-rw-r--r-- 1 root root  808538 2006-07-23 00:21 fcdslslusb.ko
-rw-r--r-- 1 root root  809293 2006-07-23 00:21 fcdslusb2.ko
-rw-r--r-- 1 root root  808569 2006-07-23 00:21 fcdslusba.ko
-rw-r--r-- 1 root root  709490 2006-07-23 00:21 fcdslusb.ko
-rw-r--r-- 1 root root  614555 2006-07-23 00:21 fcpci.ko
-rw-r--r-- 1 root root8779 2006-07-23 00:21 fcpcmcia_cs.ko
-rw-r--r-- 1 root root  606863 2006-07-23 00:21 fcpcmcia.ko
-rw-r--r-- 1 root root  607657 2006-07-23 00:21 fcusb.ko
-rw-r--r-- 1 root root  471141 2006-07-23 00:21 fglrx.ko
-rw-r--r-- 1 root root  654348 2006-07-23 00:21 fxusb.ko
-rw-r--r-- 1 root root   0 2006-07-23 00:20 .mounted
-rw-r--r-- 1 root root  208279 2006-07-23 00:21 new_ath_hal.ko
-rw-r--r-- 1 root root 5176266 2006-07-23 00:21 nvidia.ko
-rw-r--r-- 1 root root 4410619 2006-07-23 00:21 nvidia_legacy.ko

It seems, modprobe doesn't look into this volatile directory?

[EMAIL PROTECTED]:~$ sudo insmod  
/lib/modules/2.6.15-26-686/volatile/ath_hal.ko 
[EMAIL PROTECTED]:~$ sudo modprobe -v ath_pci
insmod /lib/modules/2.6.15-26-686/madwifi/ath_rate_sample.ko
insmod /lib/modules/2.6.15-26-686/madwifi/ath_pci.ko

So, when I manually load the module, I can then modprobe ath_pci and
thus access the WLAN just fine.

Thus I asume, that the real problem is, that modprobe doesn't check the
volatile directory. Why does it not do this?

-- 
Cannot load ath_pci from madwifi
https://launchpad.net/bugs/53728

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53133] Re: Totem crashs system

2006-07-17 Thread Alexander Skwar 
Hi.
Yes, I know that an application shouldn't crash something else - but only Totem 
manages to crash (or maybe better freeze?) my system.

There's nothing in /var/log/{messages,syslog}. I'll attach
/etc/X11/xorg.conf now and /var/log/Xorg.0.log.old (from the prev.
session, where Totem froze the system) in yet another reply.

-- 
Totem crashs system
https://launchpad.net/bugs/53133

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53133] Re: Totem crashs system

2006-07-17 Thread Alexander Skwar 
[EMAIL PROTECTED]:/var/log$ dpkg -l | grep -i totem
ii  libtotem-plparser1 1.4.1-0ubuntu4   
   Totem Playlist Parser library - runtime vers
ii  totem  1.4.1-0ubuntu4   
   A simple media player for the Gnome desktop
ii  totem-gstreamer1.4.1-0ubuntu4   
   A simple media player for the Gnome desktop
ii  totem-gstreamer-firefox-plugin 1.4.1-0ubuntu4   
   Totem Firefox Plugin - gstreamer version

-- 
Totem crashs system
https://launchpad.net/bugs/53133

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53163] Re: Sound very jerky with 2.6.15-26 kernel and modules

2006-07-17 Thread Alexander Skwar 
The jerkiness is also apparent with ``aplay -Dplughw:0
/usr/share/sounds/startup.wav''. But it's not just the jerkiness, the
real problem is, that I cannot login into Gnome anymore. To be able to
start Gnome, I've got to kill esd. Then the applications startup just
fine - until the next sound is played.

-- 
Sound very jerky with 2.6.15-26 kernel and modules
https://launchpad.net/bugs/53163

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53133] Re: Totem crashs system when playing MJPEG AVI

2006-07-16 Thread Alexander Skwar 
These are the source JPEG files, which I used to encode the MJPEG AVI
file.

-- 
Totem crashs system when playing MJPEG AVI
https://launchpad.net/bugs/53133

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53133] Re: Totem crashs system

2006-07-16 Thread Alexander Skwar 
I just noticed, that Totem also crashes the system, when playing other
videos, like the Ubuntu example video Experience ubuntu.ogg.

-- 
Totem crashs system when playing MJPEG AVI
https://launchpad.net/bugs/53133

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 53133] Re: Totem crashs system

2006-07-16 Thread Alexander Skwar 
** Summary changed:

- Totem crashs system when playing MJPEG AVI
+ Totem crashs system

-- 
Totem crashs system
https://launchpad.net/bugs/53133

--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs