Re: [Bug 2072153] Re: LUKS/Cryptsetup shows blank screen on boot in noble
No such luck. Escape does nothing, even if I hammer it for a good while. I did get text mode after I blindly entered my password, though, for a couple of seconds until I entered X. man. 8. juli 2024 kl. 08:30 skrev Daniel van Vugt < 2072...@bugs.launchpad.net>: > Next time you are stuck on the blank screen, try tapping the Escape key > to switch to text mode. It should be possible to unlock from there. > > If that worked then you might also try tapping the Escape key multiple > times to see if you can get the boot graphics to appear. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/2072153 > > Title: > LUKS/Cryptsetup shows blank screen on boot in noble > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/2072153/+subscriptions > > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2072153 Title: LUKS/Cryptsetup shows blank screen on boot in noble To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/2072153/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2072153] Re: LUKS/Cryptsetup shows blank screen on boot in noble
I'm using the internal screen, and I have no other screens attached. The internal screen is a 3840x2160 resolution one. No change if I set plymouth.use-simpledrm. It could be noted, though, that when I reboot from a working state, I see the splash screen on shutdown after X is shut down before the machine boots. That is, there is something that works once X has run proper. Moreover, if I remove "quiet" from the boot line (and enter my password blindly), after a while the screen blinks black" and I see the boot messages in high resolution (i.e. small font) for half a second on the screen right before I get dumped into the X login screen. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2072153 Title: LUKS/Cryptsetup shows blank screen on boot in noble To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/2072153/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2072153] [NEW] LUKS/Cryptsetup shows blank screen on boot in noble
Public bug reported: After upgrading from Ubuntu 23.10 to 24.04, I get a blank screen at boot instead of the password prompt. I can enter my password blindly and boot into X as usual, but nothing I have tried for getting the password prompt has worked. I'm on a Thinkpad T580, with an NVIDIA GeForce MX150. I'm on the nvidia driver version 555.52.04 from the graphics drivers ppa. I have tried various combinations of: - not having driver version 555 installed (It was left at the old version on upgrade - modding grub to say nosplash, gfxmode=auto or gfxmode=text or gfxmode=wxh (all gave me text, but also a kernel panic about synaptics drivers) - modding grub to say nomodeset, and/or nvidia.modeset=0 ** Affects: plymouth (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2072153 Title: LUKS/Cryptsetup shows blank screen on boot in noble To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/2072153/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 2068738] Re: AMD GPUs fail with null pointer dereference when IOMMU enabled, leading to black screen
followed your instructions, and the kernel update seems to work fine on my system On 7/3/24 11:50 PM, Matthew Ruffell wrote: > Hi everyone, > > The Kernel Team have respun the latest 5.15 kernel with the fix, and have > placed > it into -proposed for verification. > > Could someone more technically minded help test it and let me know if it fixes > the problem? > > Instructions to Install (On a jammy system): > 1) cat << EOF | sudo tee /etc/apt/sources.list.d/ubuntu-$(lsb_release > -cs)-proposed.list > # Enable Ubuntu proposed archive > deb http://archive.ubuntu.com/ubuntu/ $(lsb_release -cs)-proposed main > universe > EOF > 2) sudo apt update > 3) sudo apt install linux-image-5.15.0-116-generic > linux-modules-5.15.0-116-generic linux-modules-extra-5.15.0-116-generic > linux-headers-5.15.0-116-generic > 4) sudo rm /etc/apt/sources.list.d/ubuntu-$(lsb_release -cs)-proposed.list > 5) sudo apt update > 6) sudo reboot > 7) uname -rv > 5.15.0-116-generic #126-Ubuntu SMP Mon Jul 1 10:14:24 UTC 2024 > > Can you let me know if you can boot to your desktop and have a working > screen? > > We are still on track for a release to -updates next week sometime. > > Thanks, > Matthew > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2068738 Title: AMD GPUs fail with null pointer dereference when IOMMU enabled, leading to black screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2068738/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2071716] [NEW] python3.12: cdsitepackages and lssitepackages use removed distutils package
Public bug reported: On ubuntu noble the cdsitepackages/lssitepackages commands fail with the following error: $ cdsitepackages Traceback (most recent call last): File "", line 1, in ModuleNotFoundError: No module named 'distutils' The cause is the removal of distutils from python 3.12 https://docs.python.org/3.11/distutils/ Upstream has released an update which uses the sysconfig module. https://github.com/python- virtualenvwrapper/virtualenvwrapper/commit/05ccf752512c74d212f746017f240c692f848983 ** Affects: virtualenvwrapper (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2071716 Title: python3.12: cdsitepackages and lssitepackages use removed distutils package To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/virtualenvwrapper/+bug/2071716/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
Could you add “Avoid entering your password to grant higher levels of permission to programs without being aware of having started those programs.” to the “An application is attempting to perform an action that requires privileges. Authentication is required to perform this action.” pop up message. Malware could trick a user into entering their admin password in order to gain higher privileges. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
If a user chooses to use a deb file to install software, Linux could prompt the user for the hash value. This would ensure the file didn’t get corrupted while downloading. The attacker that embedded malware in Linux Mint, created a hash value for the iso file. Verifying the hash would not have protected users. There could be a database of hash values for non repository software. If a user downloads a deb file, linux could use the hash value from the database to verify the download is safe. If the downloaded software is not found in the database, a user could press a button to request the software and hash value be added. Linux security team developers could check the software and add the legitimate hash value to the database. This could help protect inexperienced Linux users. A user could install non malicious software from the repository or a deb file, but malware could be delivered through software updates. Some software developers might not be trustworthy or they might get hacked. Malicious code might be obvious in open source software, but security flaws are like a back door and are more difficult to discover. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2071351] [NEW] Kernel 5.15.113 and AMD graphics
Public bug reported: Both kernel -112 and -113 do nor fully boot (no graphics, can't log in) on my HP laptop. kernel -107 still works. inxi -Gx: Graphics: Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series] vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 03:00.0 Device-2: Chicony HP Webcam type: USB driver: uvcvideo bus-ID: 1-4:3 Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa gpu: amdgpu resolution: 1366x768~60Hz OpenGL: renderer: RAVEN2 (raven2 LLVM 15.0.7 DRM 3.42 5.15.0-107-generic) v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2071351 Title: Kernel 5.15.113 and AMD graphics To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2071351/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
** Description changed: The idea that linux is immune to malware is a false sense of security. Prevention is the best solution. The Ubuntu Software Center might contain undiscovered malware. Users could download a malicious .deb file. Firefox could automatically download a malicious java script file. Malware could trick a user into entering their root password. I know AV affects performance. It could automatically only scan files and repositories added to the system. A scheduled system scan could be optional. The following could be preinstalled: ClamAV chkrootkit rkhunter - AIDE + Suricata -intrusion prevention/detection -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
** Description changed: The idea that linux is immune to malware is a false sense of security. Prevention is the best solution. The Ubuntu Software Center might contain undiscovered malware. Users could download a malicious .deb file. Firefox could automatically download a malicious java script file. Malware could trick a user into entering their root password. I know AV affects performance. It could automatically only scan files and repositories added to the system. A scheduled system scan could be optional. The following could be preinstalled: ClamAV chkrootkit rkhunter + AIDE -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
** Description changed: The idea that linux is immune to malware is a false sense of security. Prevention is the best solution. The Ubuntu Software Center might contain undiscovered malware. Users could download a malicious .deb file. Firefox could automatically download a malicious java script file. Malware could trick a user into entering their root password. I know AV affects performance. It could automatically only scan files and repositories added to the system. A scheduled system scan could be optional. + + The following could be preinstalled: + + ClamAV + chkrootkit + rkhunter -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
** Description changed: The idea that linux is immune to malware is a false sense of security. - Prevention is the best solution. I know users are safe if they only - install software from the Software Center, but users could download a - malicious .deb file. Firefox could automatically download a malicious - java script file. Malware could trick a user into entering their root - password. I know AV affects performance. It could automatically only - scan files and repositories added to the system. A scheduled system scan - could be optional. + Prevention is the best solution. The Ubuntu Software Center might + contain undiscovered malware. Users could download a malicious .deb + file. Firefox could automatically download a malicious java script file. + Malware could trick a user into entering their root password. I know AV + affects performance. It could automatically only scan files and + repositories added to the system. A scheduled system scan could be + optional. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install ClamAV Anti-virus by default for system scanning
Kaspersky has released a virus removal tool for Linux. Go to the website below and click “Show other platforms”. Some people don’t trust Kaspersky, but it is a well known security company. Use at your own risk. https://www.kaspersky.com/downloads/free-virus-removal-tool Information about Kaspersky Virus Removal Tool for Linux: https://www.kaspersky.com/blog/kvrt-for-linux/51375/ Linux Malware: https://securelist.com/?s=Linux https://www.akamai.com/blog/security-research/critical-linux-backdoor-xz-utils-discovered-what-to-know Security researcher’s comments on Linux security: https://madaidans-insecurities.github.io/linux.html ** Summary changed: - Install ClamAV Anti-virus by default for system scanning + Install Anti-virus by default for system scanning ** Summary changed: - Install Anti-virus by default for system scanning + Install Anti-Malware by default for system scanning -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1857410] Re: Install Anti-Malware by default for system scanning
Could you add reverse shell detection and automatically block remote connections? There could be a firewall section in the settings app that would allow a user to override the blocked remote connection. There could be a warning about the danger of allowing the connection because it can’t be determined if there is malicious intent. ** Also affects: ubuntu-personal-security (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1857410 Title: Install Anti-Malware by default for system scanning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/1857410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2068702] Re: fakeroot test hangs on launchpad builder
Likely related, since 1.35 fakeroot hangs for several minutes when run inside a docker container. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2068702 Title: fakeroot test hangs on launchpad builder To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fakeroot/+bug/2068702/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890791]
Hi i found something funny why my Dolphin is not updating the view. I just found it comfy to put a shortcut of the PAPERBIN on my Desktop. After this Dolphin was not updating the view!!! After removing the PAPERBIN shortcut on my desktop (i put it in Paperbins ;-) ) Dolphin is working like normal and view is updated! As i am no expert to fix this problem or look at it its up to the professionals. In my case it was a "simple shortcut" like i was used to from windows. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890791 Title: Dolphin isn't Noticing Newly Created Files To manage notifications about this bug go to: https://bugs.launchpad.net/dolphin/+bug/1890791/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890791]
(In reply to mozo from comment #97) > (In reply to Heli from comment #96) > > Hi i found something funny why my Dolphin is not updating the view. > > I just found it comfy to put a shortcut of the PAPERBIN on my Desktop. After > > this Dolphin was not updating the view!!! > > After removing the PAPERBIN shortcut on my desktop (i put it in Paperbins > > ;-) ) Dolphin is working like normal and view is updated! > > > > As i am no expert to fix this problem or look at it its up to the > > professionals. In my case it was a "simple shortcut" like i was used to from > > windows. > > What's PAPERBIN? THE TRASH i made a Shortcut to trash:/ on my desktop to have the trash on there. if i remove the shortcut then dolphin works as normal. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890791 Title: Dolphin isn't Noticing Newly Created Files To manage notifications about this bug go to: https://bugs.launchpad.net/dolphin/+bug/1890791/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2068860] [NEW] exception: Popper__namespace.createPopper is not a function
Public bug reported: Source Package: phpmyadmin (4:5.2.1+dfsg-3) [universe] # lsb_release -rd No LSB modules are available. Description:Ubuntu 24.04 LTS Release:24.04 # apt-cache policy phpmyadmin phpmyadmin: Installed: 4:5.2.1+dfsg-3 Candidate: 4:5.2.1+dfsg-3 Version table: *** 4:5.2.1+dfsg-3 500 500 http://us.archive.ubuntu.com/ubuntu noble/universe amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu noble/universe i386 Packages 100 /var/lib/dpkg/status What I expected to happen: Click on Structure tab for a table, then hover over More for a given column in the table. I expected to get a popup menu with choices like: Primary Unique Index Spatial Fulltext Distinct values What happens is nothing. If I click on More, nothing still seems to happen, but when I scroll to the bottom of the page, I see a line with a pink background saying: "A fatal JavaScript error has occurred. Would you like to send an error report?" followed by a button saying "Show report details". When I click on that button, I get an error report containing the text in the attached file "phpmyadmin.createPopper.error.txt" Someone else has also reported this on github for phpmyadmin here: https://github.com/phpmyadmin/phpmyadmin/issues/19166 It looks like it's a bug in bootstrap 5.3.1 which is provided by phpmyadmin: Bootstrap v5.3.1 (https://getbootstrap.com/ ** Affects: phpmyadmin (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Error report from phpmyadmin" https://bugs.launchpad.net/bugs/2068860/+attachment/5787807/+files/phpmyadmin.createPopper.error.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2068860 Title: exception: Popper__namespace.createPopper is not a function To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/phpmyadmin/+bug/2068860/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2067835] [NEW] install gnome on wsl2
Public bug reported: install gnome on wsl2 ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: xorg 1:7.7+23ubuntu3 Uname: Linux 5.15.153.1-microsoft-standard-WSL2 x86_64 ApportVersion: 2.28.1-0ubuntu3 Architecture: amd64 CasperMD5CheckResult: unknown CloudArchitecture: x86_64 CloudID: none CloudName: none CloudPlatform: none CloudSubPlatform: config CompositorRunning: None CurrentDmesg: Error: command ['pkexec', 'dmesg'] failed with exit code 127: Error registering local authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject Date: Sun Jun 2 16:06:56 2024 DistUpgraded: Fresh install DistroCodename: noble DistroVariant: ubuntu DkmsStatus: xtrx/0.0.1+git20190320.5ae3a3e-3.2ubuntu2, 6.8.0-31-generic, x86_64: installed (WARNING! Diff between built and installed module!) ExtraDebuggingInterest: Yes GraphicsCard: Lspci-vt: -[2cdd:00]---00.0 Red Hat, Inc. Virtio file system -[5582:00]---00.0 Red Hat, Inc. Virtio 1.0 console -[824f:00]---00.0 Microsoft Corporation Basic Render Driver Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Lsusb-t: /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=vhci_hcd/8p, 480M /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=vhci_hcd/8p, 5000M ProcEnviron: LANG=pl_PL.UTF-8 PATH=(custom, no user) SHELL=/bin/zsh TERM=xterm-256color XDG_RUNTIME_DIR= ProcKernelCmdLine: initrd=\initrd.img WSL_ROOT_INIT=1 panic=-1 nr_cpus=12 hv_utils.timesync_implicit=1 earlycon=uart8250,io,0x3f8,115200 console=hvc0 debug pty.legacy_count=0 ProcModules: xt_CT 16384 1 - Live 0x SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) acpidump: Error: command ['pkexec', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 127: Error registering local authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.120-2build1 version.libgl1-mesa-dri: libgl1-mesa-dri 24.0.5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:21.1.12-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:22.0.0-1build1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20210115-1build1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-2build1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug noble ubuntu wayland-session -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2067835 Title: install gnome on wsl2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/2067835/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2058227] Re: Crash during upgrade from Mantic to Noble due to Python 3.12
AFAIK Starting from May's 24th, Upgrades from Mantic have been enabled. ** Attachment added: "photo_2024-05-29_11-40-24.jpg" https://bugs.launchpad.net/ubuntu/+source/apt-xapian-index/+bug/2058227/+attachment/5783846/+files/photo_2024-05-29_11-40-24.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2058227 Title: Crash during upgrade from Mantic to Noble due to Python 3.12 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt-xapian-index/+bug/2058227/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2067059] Re: Auto-attach image support is not available on none
Hi Grant, Thanks for the workaround. It works. I am using the following version of Ubuntu 18.04 in Azure. # cloud-id none # cat /etc/os-release NAME="Ubuntu" VERSION="18.04.6 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.6 LTS" VERSION_ID="18.04" HOME_URL="https://www.ubuntu.com/; SUPPORT_URL="https://help.ubuntu.com/; BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/; PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy; VERSION_CODENAME=bionic UBUNTU_CODENAME=bionic # cloud-init --version /usr/bin/cloud-init 23.1.2-0ubuntu0~18.04.1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2067059 Title: Auto-attach image support is not available on none To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-advantage-tools/+bug/2067059/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2065234] Re: can't unlock and xfce4-screensaver-dialog segfaults if weston running
I discovered that invoking weston as `weston --socket=something` prevents the segfaults. But perhaps there should be some code in the screensaver to detect this problem and prevent the crash? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2065234 Title: can't unlock and xfce4-screensaver-dialog segfaults if weston running To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-screensaver/+bug/2065234/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2065234] [NEW] can't unlock and xfce4-screensaver-dialog segfaults if weston running
Public bug reported: laptop running xubuntu 22.04.4, logged into xubuntu session. xfce4-screensaver 4.16.0-1 weston 9.0.0-4ubuntu1 firefox 125.0.3-1 (snap) Run firefox. In terminal: tail -f /var/log/syslog In another terminal: weston Lock the screen by hotkey calling: xflock4 Press key to bring up dialog but only black shows - can see backlight periodically turning on/off and flashes of cursor when pressing keys. Ctrl-Alt-F1; login; pkill weston; Alt-F7 back to locked session. Now unlocking works normally again. However, after unlocking, many firefox empty windows have been created. /var/log/syslog shows new output: May 9 02:02:55 hostname kernel: [387457.737377] xfce4-screensav[355062]: segfault at 7fda0084 ip 7fdac936052f sp 7ffd6783c1a0 error 4 in libgdk-3.so.0.2404.29[7fdac9324000+83000] May 9 02:02:55 hostname kernel: [387457.737387] Code: 57 82 fc ff 49 8b 9c 24 70 01 00 00 48 85 db 74 4e 49 89 c5 eb 0a 0f 1f 44 00 00 48 85 db 74 3f 48 8b 2b 48 89 de 48 8b 5b 08 <48> 8b 45 08 48 85 c0 74 e8 4c 39 e8 7f e3 49 8b bc 24 70 01 00 00 May 9 02:02:55 hostname xfce4-screensav[2995]: g_object_ref: assertion 'G_IS_OBJECT (object)' failed May 9 02:02:57 hostname kernel: [387459.627666] xfce4-screensav[355067]: segfault at 2580418 ip 559c184c2e59 sp 7ffc0b3c1370 error 4 in xfce4-screensaver-dialog[559c184be000+e000] May 9 02:02:57 hostname kernel: [387459.627676] Code: 48 8d 74 24 30 4c 89 e7 e8 c4 cb ff ff 8b 4c 24 38 44 8b 44 24 3c 4c 89 ef 89 4c 24 1c 44 89 44 24 10 e8 7a dc ff ff 4c 89 ef <44> 8b 60 18 e8 6e dc ff ff 44 8b 4c 24 08 44 8b 44 24 10 4c 89 ff May 9 02:03:01 hostname kernel: [387464.025803] xfce4-screensav[355081]: segfault at 2580418 ip 5646542f7e59 sp 7ffeed5fe800 error 4 in xfce4-screensaver-dialog[5646542f3000+e000] May 9 02:03:01 hostname kernel: [387464.025813] Code: 48 8d 74 24 30 4c 89 e7 e8 c4 cb ff ff 8b 4c 24 38 44 8b 44 24 3c 4c 89 ef 89 4c 24 1c 44 89 44 24 10 e8 7a dc ff ff 4c 89 ef <44> 8b 60 18 e8 6e dc ff ff 44 8b 4c 24 08 44 8b 44 24 10 4c 89 ff May 9 02:03:03 hostname kernel: [387466.135825] xfce4-screensav[355094]: segfault at 2580418 ip 557eccebee59 sp 7ffc5a202b10 error 4 in xfce4-screensaver-dialog[557ecceba000+e000] May 9 02:03:03 hostname kernel: [387466.135837] Code: 48 8d 74 24 30 4c 89 e7 e8 c4 cb ff ff 8b 4c 24 38 44 8b 44 24 3c 4c 89 ef 89 4c 24 1c 44 89 44 24 10 e8 7a dc ff ff 4c 89 ef <44> 8b 60 18 e8 6e dc ff ff 44 8b 4c 24 08 44 8b 44 24 10 4c 89 ff May 9 02:03:07 hostname kernel: [387469.786031] xfce4-screensav[355107]: segfault at 2580418 ip 5627b214be59 sp 7ffc56cbb780 error 4 in xfce4-screensaver-dialog[5627b2147000+e000] May 9 02:03:07 hostname kernel: [387469.786041] Code: 48 8d 74 24 30 4c 89 e7 e8 c4 cb ff ff 8b 4c 24 38 44 8b 44 24 3c 4c 89 ef 89 4c 24 1c 44 89 44 24 10 e8 7a dc ff ff 4c 89 ef <44> 8b 60 18 e8 6e dc ff ff 44 8b 4c 24 08 44 8b 44 24 10 4c 89 ff May 9 02:03:08 hostname kernel: [387471.125899] xfce4-screensav[355120]: segfault at 2580418 ip 558dad3b5e59 sp 7fff8de7d090 error 4 in xfce4-screensaver-dialog[558dad3b1000+e000] May 9 02:03:08 hostname kernel: [387471.125909] Code: 48 8d 74 24 30 4c 89 e7 e8 c4 cb ff ff 8b 4c 24 38 44 8b 44 24 3c 4c 89 ef 89 4c 24 1c 44 89 44 24 10 e8 7a dc ff ff 4c 89 ef <44> 8b 60 18 e8 6e dc ff ff 44 8b 4c 24 08 44 8b 44 24 10 4c 89 ff May 9 02:03:09 hostname wireplumber[2810]: [string "policy-bluetooth.lua"]:121: bad argument #1 to 'find' (string expected, got nil)#012stack traceback:#012#011[C]: in function 'string.find'#012#011[string "policy-bluetooth.lua"]:121: in upvalue 'isBluez5AudioSink'#012#011[string "policy-bluetooth.lua"]:389: in function <[string "policy-bluetooth.lua"]:387> May 9 02:03:09 hostname systemd[2801]: Started snap.firefox.firefox-caf74e0d-aff8-419d-9e3c-44aabb8abacb.scope. May 9 02:03:09 hostname systemd[2801]: Started snap.firefox.firefox-254eb60d-01c9-4a44-9558-825d8954d937.scope. May 9 02:03:09 hostname systemd[2801]: Started snap.firefox.firefox-0cb163b8-0ef8-4e3c-94e7-8cfc3f1873b0.scope. May 9 02:03:09 hostname systemd[2801]: Started snap.firefox.firefox-56b82216-0fe6-4bc2-afee-c1ebb971e98a.scope. May 9 02:03:10 hostname systemd[2801]: Started snap.firefox.firefox-ccecdc0f-7743-4791-bd4a-f53a4e64b9ff.scope. May 9 02:03:13 hostname wireplumber[2810]: SPA handle 'api.bluez5.enum.dbus' could not be loaded; is it installed? May 9 02:03:13 hostname wireplumber[2810]: PipeWire's BlueZ SPA missing or broken. Bluetooth not supported. May 9 02:03:14 hostname systemd[2801]: Started snap.firefox.firefox-8702c3ef-c11f-4c45-bb50-0a3873dd084c.scope. May 9 02:03:14 hostname systemd[2801]: Started snap.firefox.firefox-8c3507de-27d0-4af8-88cc-c5ce8bb6438c.scope. May 9 02:03:14 hostname systemd[2801]: Started snap.firefox.firefox-d43f024e-731a-4b55-ba1b-5ce97f58c116.scope. May 9 02:03:14 hostname systemd[2801]: Started
[Bug 2056543] Re: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04
*** This bug is a duplicate of bug 2056506 *** https://bugs.launchpad.net/bugs/2056506 OK =) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2056543 Title: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2056543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2056543] Re: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04
Yes. I reproduced it exactly here to validate, when trying to close an APP by clicking on the dock, when closing, the session was immediately logged out. A few days ago, I tried to disable Waylan, but the problems seem to recur more often. But it happens anyway. In some cases, for example, if you try to just block the current session, it also generates behavior. Below is the result of journalctl attached to this. Thanks! ** Attachment added: "prevboot.txt" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2056543/+attachment/5754998/+files/prevboot.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2056543 Title: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2056543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2056543] [NEW] Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04
Public bug reported: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04. > Oh no! Something has gone worng; A problem has occurred and the system cant recover. Please log out and try again. ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: gdm3 45.0.1-1ubuntu2 ProcVersionSignature: Ubuntu 6.8.0-11.11-generic 6.8.0-rc4 Uname: Linux 6.8.0-11-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Mar 8 07:50:09 2024 DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+loki-n3-v3-whl+X32 InstallationDate: Installed on 2020-12-12 (1182 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 ProcEnviron: LANG=pt_BR.UTF-8 LANGUAGE=pt_BR:pt:en PATH=(custom, no user) SHELL=/bin/bash TERM=xterm-256color SourcePackage: gdm3 UpgradeStatus: Upgraded to noble on 2024-02-28 (9 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T11:20:00 ** Affects: gdm3 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug noble ** Description changed: - Ubuntu 24.04 quebrando o gnome, apresetando "Ops.." solicitando logout, - e varias instabilidades ao usar o GDM3 ao inves de Waylan apos atualizar - do 22.04 para 24.04 + Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and + several instabilities when using GDM3 instead of Waylan after upgrading + from 22.04 to 24.04. + + > Oh no! Something has gone worng; A problem has occurred and the system + cant recover. Please log out and try again. + ProblemType: Bug DistroRelease: Ubuntu 24.04 Package: gdm3 45.0.1-1ubuntu2 ProcVersionSignature: Ubuntu 6.8.0-11.11-generic 6.8.0-rc4 Uname: Linux 6.8.0-11-generic x86_64 ApportVersion: 2.28.0-0ubuntu1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Fri Mar 8 07:50:09 2024 DistributionChannelDescriptor: - # This is the distribution channel descriptor for the OEM CDs - # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor - canonical-oem-somerville-bionic-amd64-20180608-47+loki-n3-v3-whl+X32 + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-bionic-amd64-20180608-47+loki-n3-v3-whl+X32 InstallationDate: Installed on 2020-12-12 (1182 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 ProcEnviron: - LANG=pt_BR.UTF-8 - LANGUAGE=pt_BR:pt:en - PATH=(custom, no user) - SHELL=/bin/bash - TERM=xterm-256color + LANG=pt_BR.UTF-8 + LANGUAGE=pt_BR:pt:en + PATH=(custom, no user) + SHELL=/bin/bash + TERM=xterm-256color SourcePackage: gdm3 UpgradeStatus: Upgraded to noble on 2024-02-28 (9 days ago) mtime.conffile..etc.init.d.apport: 2024-02-22T11:20:00 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2056543 Title: Ubuntu 24.04 breaking gnome, showing "Oops.." requesting logout, and several instabilities when using GDM3 instead of Waylan after upgrading from 22.04 to 24.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/2056543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1677050] GOOD DAY!
Hope this email finds you well! Been thinking of you lately. Please let me know when you get this, I'd like to ask you something. Stay safe and healthy, Jim -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1677050 Title: Youtube video will not run To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1677050/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1970148] Re: Brave & Chrome browsers freezes on download and print to pdf
I have the same issue on Windows 11, Chrome/Edge freezing for about 3-4 seconds when you save any file to disk. This started a few days ago. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1970148 Title: Brave & Chrome browsers freezes on download and print to pdf To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1970148/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1308439] Re: add --version argument
version option was added in 2.19 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1308439 Title: add --version argument To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/findimagedupes/+bug/1308439/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1959508] Re: enable BMFF support in exiv2
Many thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1959508 Title: enable BMFF support in exiv2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/exiv2/+bug/1959508/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662840]
*** Bug 1759018 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662840 Title: Spell checking more than one language in Firefox To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/662840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1844453]
Can confirm that 2FA does not work. Even the GNOME Settings application has this feature. --- Version: 7.2.5.2.0+ Build ID: 20(Build:2) CPU threads: 24; OS: Linux 5.16; UI render: default; VCL: gtk3 Locale: en-US (en_US.UTF-8); UI: en-US Calc: threaded -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1844453 Title: [upstream] Access to the Google remote account does not work To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1844453/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 662840]
There is some work happening here currently. See bug 1402822 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/662840 Title: Spell checking more than one language in Firefox To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/662840/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1934643] Re: infinite loop in patched cJSON_Minify function
Is there anything we can do to help getting this fixed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1934643 Title: infinite loop in patched cJSON_Minify function To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cjson/+bug/1934643/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1961488] [NEW] radeon module unloaded with 20.04 after upgrade from 18.04
Public bug reported: I upgraded a computer running Ubuntu 18.04 with AMD ATI RS482/RS485 Radeon Xpress 1100/1150 without problem. After upgrade to 20.04, resolution is virtual size of 1400x1050 which doesn't fit in screen. With 18.04 I had in xorg.o.log [ 6647.940] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 6647.940] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 6647.940] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 6647.940] (==) RADEON(0): Default visual is TrueColor [ 6647.940] (==) RADEON(0): RGB weight 888 [ 6647.940] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 6647.940] (--) RADEON(0): Chipset: "ATI Radeon 3100 Graphics" (ChipID = 0x9611) [ 6647.940] (II) Loading sub module "fb" [ 6647.940] (II) LoadModule: "fb" [ 6647.960] (II) Loading /usr/lib/xorg/modules/libfb.so [ 6647.971] (II) Module fb: vendor="X.Org Foundation" [ 6647.971]compiled for 1.18.4, module version = 1.0.0 [ 6647.971]ABI class: X.Org ANSI C Emulation, version 0.4 [ 6647.971] (II) Loading sub module "dri2" [ 6647.971] (II) LoadModule: "dri2" [ 6647.971] (II) Module "dri2" already built-in [ 6647.971] (II) Loading sub module "exa" [ 6647.971] (II) LoadModule: "exa" [ 6647.972] (II) Loading /usr/lib/xorg/modules/libexa.so [ 6647.976] (II) Module exa: vendor="X.Org Foundation" [ 6647.976]compiled for 1.18.4, module version = 2.6.0 [ 6647.976]ABI class: X.Org Video Driver, version 20.0 [ 6647.976] (II) RADEON(0): KMS Color Tiling: enabled [ 6647.976] (II) RADEON(0): KMS Color Tiling 2D: enabled [ 6647.976] (II) RADEON(0): KMS Pageflipping: enabled [ 6647.976] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 6648.008] (II) RADEON(0): Output VGA-0 has no monitor section [...] and now [ 789.949] (II) FBDEV(0): using default device [ 789.949] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32 [ 789.949] (==) FBDEV(0): RGB weight 888 [ 789.949] (==) FBDEV(0): Default visual is TrueColor [ 789.949] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) [ 789.949] (II) FBDEV(0): hardware: VESA VGA (video memory: 5760kB) [ 789.949] (DB) xf86MergeOutputClassOptions unsupported bus type 0 [ 789.949] (II) FBDEV(0): checking modes against framebuffer device... [ 789.949] (II) FBDEV(0): checking modes against monitor... [ 789.949] (II) FBDEV(0): Virtual size is 1400x1050 (pitch 1400) [ 789.949] (**) FBDEV(0): Built-in mode "current": 147.0 MHz, 83.2 kHz, 77.4 Hz [ 789.949] (II) FBDEV(0): Modeline "current"x0.0 147.04 1400 1432 1600 1768 1050 1054 1058 1074 -hsync -vsync -csync (83.2 kHz b) [ 789.949] (==) FBDEV(0): DPI set to (96, 96) [ 789.949] (II) Loading sub module "fb" [ 789.949] (II) LoadModule: "fb" [ 789.949] (II) Loading /usr/lib/xorg/modules/libfb.so [ 789.950] (II) Module fb: vendor="X.Org Foundation" [ 789.950]compiled for 1.20.13, module version = 1.0.0 [ 789.950]ABI class: X.Org ANSI C Emulation, version 0.4 [ 789.950] (**) FBDEV(0): using shadow framebuffer [ 789.950] (II) Loading sub module "shadow" [ 789.950] (II) LoadModule: "shadow" [ 789.962] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 789.962] (II) Module shadow: vendor="X.Org Foundation" [ 789.962]compiled for 1.20.13, module version = 1.1.0 [ 789.962]ABI class: X.Org ANSI C Emulation, version 0.4 [ 789.962] (II) UnloadModule: "radeon" [ 789.962] (II) Unloading radeon [ 789.963] (II) UnloadModule: "modesetting" [ 789.963] (II) Unloading modesetting [...] ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.13.0-30.33~20.04.1-generic 5.13.19 Uname: Linux 5.13.0-30-generic x86_64 .tmp.unity_support_test.1: ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Sat Feb 19 18:29:21 2022 DistUpgraded: 2021-03-08 13:38:14,332 DEBUG package 'libcpanel-json-xs-perl' produces an unwanted removal 'gnome-software-plugin-snap', skipping DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] RS482/RS485 [Radeon Xpress 1100/1150] [1002:5974] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company DC5750 Microtower [103c:280a] Subsystem: Hewlett-Packard Company RS480 [Radeon Xpress 1150] (Secondary) [103c:280b] InstallationDate: Installed on 2015-11-26 (2276 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) MachineType: Hewlett-Packard HP Compaq dc5750 Small Form Factor ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.13.0-30-generic root=UUID=681c938b-c95d-48de-886f-bc784bb57787 ro nomodeset quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build alongside other OS
The installation text creates the impression that jellyfish will install alongside pre-existing operating systems. Perhaps there should be a warning that it is a little more complicated in practice. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build alongside other OS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1959508] Re: enable BMFF support in exiv2
> > I am uploading exiv2 now to Ubuntu as packaged in Debian. > I just looked at https://ftp.debian.org/debian/pool/main/e/exiv2/exiv2_0.27.5-1.debian.tar.xz and I don't think it enables BMFF at build time, so I don't think this will enable CR3 support: $ grep ENABLE debian/rules -DEXIV2_ENABLE_NLS=ON \ -DEXIV2_ENABLE_VIDEO=ON \ -DEXIV2_ENABLE_WEBREADY=ON \ > Could you ask exiv2 why they don't enable the feature by default? > BMFF support was not enabled by default in 0.27-5 out of an abundance of caution at the time that this feature was being worked on and possible legal implications were being investigated. The situation has clarified since then and it will be enabled by default in future Exiv2 versions. See the discussion at https://github.com/Exiv2/exiv2/issues/1679 Thanks On Fri, Feb 11, 2022 at 9:20 AM Jeremy Bicha <1959...@bugs.launchpad.net> wrote: > I am uploading exiv2 now to Ubuntu as packaged in Debian. > > Could you ask exiv2 why they don't enable the feature by default? > > ** Summary changed: > > - Proposal to include exiv2 0.27.5 in Ubuntu 22.04 LTS > + enable BMFF support in exiv2 > > ** Changed in: exiv2 (Ubuntu) >Status: Confirmed => Incomplete > > ** Tags removed: upgrade-software-version > ** Tags added: jammy > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1959508 > > Title: > enable BMFF support in exiv2 > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/exiv2/+bug/1959508/+subscriptions > > ** Bug watch added: github.com/Exiv2/exiv2/issues #1679 https://github.com/Exiv2/exiv2/issues/1679 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1959508 Title: enable BMFF support in exiv2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/exiv2/+bug/1959508/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960159] Re: 5.13 amdgpu, random pixel screen
Hi Juerg, Installing the new firmware fixes it.Got some error messages but now I am on 5-13.0-28 Thank you for the support. ** Attachment added: "Screenshot_2022-02-09_22-51-01.png" https://bugs.launchpad.net/ubuntu/+source/linux-hwe-5.13/+bug/1960159/+attachment/5560088/+files/Screenshot_2022-02-09_22-51-01.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960159 Title: 5.13 amdgpu, random pixel screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-hwe-5.13/+bug/1960159/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960011] Re: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux-image-5.13.0-28-generic does not work
That solved the issue i am currently running 5.13.0-28-generic with no random noise on the laptop screen. Regarding the package i installed, should i uninstall it so it doesn't cause issues in the future or will a future update replace it? (I will surely forget about this custom install in a month) Do i mark this as resolved or is there some other procedure? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960011 Title: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux- image-5.13.0-28-generic does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1960011/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960159] Re: 5.13 amdgpu, random pixel screen
** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1960159/+attachment/5559379/+files/lspci-vnvn.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960159 Title: 5.13 amdgpu, random pixel screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1960159/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960159] [NEW] 5.13 amdgpu, random pixel screen
Public bug reported: Hi, I have a Laptop with a Ryzen 5500U, running Linux Mint 20.3. To make use of the graphics driver, I update the kernel from 5.4 to 5.13. The computer is booting up, the LM splash screen apprears and then the screen gets funky with a random assignment of pixels. It seems each pixel gets a random assigned color (white, red, blue, green?, black). The pixels change color roughly every 200-500 ms. This happens with 5.13.0-28 and 5.13.0-23. The laptop is not responding to anything. Using 5.11.22 works without any flaws. AMD gpu drivers are installed correctly. Mandatory information 1st: This one is running: Ubuntu 5.11.0-43.47~20.04.2-generic 5.11.22 Description:Linux Mint 20.3 Release:20.3 description: Notebook product: 82LM (LENOVO_MT_82LM_BU_idea_FM_IdeaPad 5 14ALC05) vendor: LENOVO version: IdeaPad 5 14ALC05 serial: MP1X width: 64 bits ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: 5.13.0-23 5.13.0-28 amdgpu kernel-bug ** Attachment added: "IMG_20220206_130329s.jpg" https://bugs.launchpad.net/bugs/1960159/+attachment/5559378/+files/IMG_20220206_130329s.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960159 Title: 5.13 amdgpu, random pixel screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1960159/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build alongside other OS
@ Norbert (nrbrtx) to overcome this bug, until some sort of fix is applied by the developers: while logged into Jammy Jellyfish navigate to /etc/default/grub and add the following line and save: GRUB_DISABLE_OS_PROBER=false After the edit, in the console, run: sudo update-grub The grub menu will be set up and other operating systems on the device will be displayed next time the system starts. (Unfortunately this is viewed as a security problem, which has yet to be addressed.) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build alongside other OS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960011] Re: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux-image-5.13.0-28-generic does not work
This issue seems like the same as Bug #1958777 reported by Yury on 2022-01-23 He just didn't test with external screen. Anyway to join bugs? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960011 Title: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux- image-5.13.0-28-generic does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1960011/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1960011] [NEW] Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux-image-5.13.0-28-generic does not work
Public bug reported: Issue: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works Both kernels below causes he same issue 5.13.0-27-generic 5.13.0-28-generic First i thought it was due to installing CUDA. But removing CUDA and NVIDIA drivers didn't work. Only switching kernels did. I used the "ubuntu-bug linux" command to report this so i assume all necessary files are included automatically ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.11.0-46-generic 5.11.0-46.51~20.04.1 ProcVersionSignature: Ubuntu 5.11.0-46.51~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-46-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Fri Feb 4 11:38:31 2022 InstallationDate: Installed on 2021-07-22 (196 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) SourcePackage: linux-signed-hwe-5.11 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-signed-hwe-5.13 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ** Package changed: linux-signed-hwe-5.11 (Ubuntu) => linux-signed- hwe-5.13 (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1960011 Title: Laptop internal display random noise, external monitor works. Rolling back to 5.11.0-46-generic works, kernels 5.13.0-27-generic and linux- image-5.13.0-28-generic does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.13/+bug/1960011/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1959508] [NEW] Proposal to include exiv2 0.27.5 in Ubuntu 22.04 LTS
Public bug reported: On https://answers.launchpad.net/ubuntu/jammy/+source/exiv2 I see that Ubuntu 22.04 currently includes exiv2 0.27.3 Exiv2 v0.27.5 includes support for Canon *.CR3 image files. The CR3 file format has been the Canon camera-raw file format since mid 2018, and is probably one of the most common raw image file formats today. Applications such as darktable, amongst others, use exiv2 to extract image metadata, thumbnails and previews, and can only open CR3 files when linked with exiv2 0.27.5 or later. Note that exiv2 0.27.5 needs to be built with -DEXIV2_ENABLE_BMFF=On to enable *.CR3 support. Would it be possible to get Exiv2 v0.27.5 with BMFF support enabled included in Ubuntu 22.04? Note that a similar request exists for Debian in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1000788 References https://github.com/exiv2/exiv2#2-19 https://github.com/Exiv2/exiv2/issues/1229 https://github.com/darktable-org/darktable/pull/10332 https://github.com/Beep6581/RawTherapee/issues/6248#issuecomment-869208918 https://answers.launchpad.net/ubuntu/+source/exiv2/+question/700398 Thanks ** Affects: exiv2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1959508 Title: Proposal to include exiv2 0.27.5 in Ubuntu 22.04 LTS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/exiv2/+bug/1959508/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1956518] Re: linux-firmware 1.187.24 may crash USB ports
I'm seeing something that seems similar, but with 1.187.25, i think. Is this related? https://ubuntuforums.org/showthread.php?t=2471244 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1956518 Title: linux-firmware 1.187.24 may crash USB ports To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1956518/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955551] Re: Software updater crashes when you deselect some some checkboxes from a list of software to update
I have the following: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 20.04.3 LTS Release:20.04 Codename: focal update-manager version: 1:20.04.10.9 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/191 Title: Software updater crashes when you deselect some some checkboxes from a list of software to update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/191/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955551] [NEW] Software updater crashes when you deselect some some checkboxes from a list of software to update
Public bug reported: When presented with list of software (components) to be updated I need to deselect some of them by clicking on check boxes and deselecting them. This normally causes the app to be unresponsive (can not click on "Install Now" button) and then crashes. It then present an error report which I used at least 100 times reporting this crash. ** Affects: update-manager (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/191 Title: Software updater crashes when you deselect some some checkboxes from a list of software to update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/191/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
As OS PROBER is disabled for security reasons I think this bug should be labelled 'security issue' IO'm not sure I know how to do that at this stage. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
As OS PROBER is disabled for security reasons I think this bug should be labelled 'security issue' ** Description changed: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. Since the 16th Dec daily build of Jammy, the boot menu does not appear any more after installation, also booting ignores Kubuntu Focal and proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the restored boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. I'll keep an eye on this thread. I think the problem is with the Jammy iso, not Focal. + + A boot menu is not created and any other operating systems on the device become invisible to the user. + As this is a development version this could be a temporary state of affairs. + At the very least the user needs to know what will happen and to know this before beginning the installation process. + + ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia: Kubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: grub2 UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
There is a workaround here but I'm pretty sure a newcomer to Ubuntu wouldn't be able to discover it. To them this would appear to be an insurmountable problem and they could get into difficulties as any other OS present alongside on their device would apparently have 'disappeared'. Perhaps the developers already have a method and plan to make this issue more user friendly? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
This bug was reported from Focal, I think I should have reported from Jammy. I just tried a report from Jammy but was redirected here. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
As os-prober has been disabled for 'security reasons' is it safe to re-enable it? I am not a developer or programmer and am ignorant in these matters so I could use some guidance. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1955109] Re: boot menu not appearing after manual install of jellyfish daily build
** Description changed: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. - Since the 16th Dec daily build of Jammy, a boot menu does not appear any - more after installation, also booting ignores Kubuntu Focal and proceeds - directly to Kubuntu 22.04. + Since the 16th Dec daily build of Jammy, the boot menu does not appear + any more after installation, also booting ignores Kubuntu Focal and + proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. I'll keep an eye on this thread. I think the problem is with Jammy, not Focal. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia: Kubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: grub2 UpgradeStatus: No upgrade log present (probably fresh install) ** Description changed: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. Since the 16th Dec daily build of Jammy, the boot menu does not appear any more after installation, also booting ignores Kubuntu Focal and proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the - boot menu. + restored boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. I'll keep an eye on this thread. I think the problem is with Jammy, not Focal. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia: Kubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: grub2 UpgradeStatus: No upgrade log present (probably fresh install) ** Description changed: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. Since the 16th Dec daily build of Jammy, the boot menu does not appear any more after installation, also booting ignores Kubuntu Focal and proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the restored boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. I'll keep an eye on this thread. - I think the problem is with Jammy, not Focal. + I think the problem is with the Jammy iso, not Focal. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia:
[Bug 1955109] [NEW] boot menu not appearing after manual install of jellyfish daily build
Public bug reported: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. Since the 16th Dec daily build of Jammy, the boot menu does not appear any more after installation, also booting ignores Kubuntu Focal and proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. I'll keep an eye on this thread. I think the problem is with Jammy, not Focal. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia: Kubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: grub2 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub2 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ** Summary changed: - boot menu not appearing after install of jellyfish daily build + boot menu not appearing after manual install of jellyfish daily build ** Tags removed: focal ** Tags added: jammy ** Description changed: desktop amd64 PC, UEFI, 8 core processor, 16gb RAM, nVidia graphics card, several ssd's manual install of Kubuntu Jellyfish to a partition on ssd alongside Kubuntu Focal LTS I am testing an installation of Kubuntu Jellyfish daily build alongside Kubuntu Focal 20.04.3 Usually this proceeds without a problem. Since the 16th Dec daily build of Jammy, a boot menu does not appear any more after installation, also booting ignores Kubuntu Focal and proceeds directly to Kubuntu 22.04. I recovered the boot menu on this PC by running boot-restore from an iso of Kubuntu Focal both Focal and Jelly fish are then available from the boot menu. This bug appears in Kubuntu Jammy after a manual install directly to the computer's ssd. + I'm not an expert at bug reporting, so if this report is incorrectly set out or if more info is needed I'm happy to follow instructions. + I'll keep an eye on this thread. + I think the problem is with Jammy, not Focal. + ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: grub2 (not installed) ProcVersionSignature: Ubuntu 5.4.0-91.102-generic 5.4.151 Uname: Linux 5.4.0-91-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.21 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Fri Dec 17 08:24:04 2021 InstallationDate: Installed on 2020-10-27 (416 days ago) InstallationMedia: Kubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: grub2 UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1955109 Title: boot menu not appearing after manual install of jellyfish daily build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1955109/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870244] Re: ec2metadata does not speak EC2 IMDSv2
Hi Paride - I think your idea to put this fix in -backports pockets sounds good. Do you have any idea when the backport for bionic will be ready? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870244 Title: ec2metadata does not speak EC2 IMDSv2 To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-utils/+bug/1870244/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1952951] Re: Discover throws certificate error - Kubuntu and Lubuntu Jammy
This bug prevents Discover from checking for updates citing a server error [due to problem with certificates] I first encountered it yesterday after fresh install of Kubuntu Jammy [Wednesday December 1st 2021] -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1952951 Title: Discover throws certificate error - Kubuntu and Lubuntu Jammy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plasma-discover/+bug/1952951/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
@ ajgreeny yes, I use zsync too -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
thanks Rik Xubuntu Jellyfish desktop amd64 installed without problem from daily iso today 25-11-2021 safe graphics, third party software, manual partitioning I don't have time to check other flavours but I think they will be okay when they are updated. Thanks again to those involved. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
@ aigreeny todays Xubuntu was released about five hours before the others, I'm guessing the corrections that were made later to the other flavours hadn't been applied that early. I tested the Xubuntu daily almost as it was released and got a fail too. I would imagine that, all being well, tomorrows dailies will all pass rock solid. ...and status will be 'fix released'. Many thanks to those who worked towards a solution. -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to ubiquity in Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
Kubuntu Jellyfish installed without problem from daily iso today 24-11-2021 safe graphics, third party software, manual partitioning -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
Ubuntu Jellyfish installed without problems from daily iso today 24-11-2021 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1952028] [NEW] xubuntu jellyfish installer crash
Public bug reported: crash reports reboot required pkgs error: path contained symlinks crash occurs as slide show starts ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubiquity 21.10.10 ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14 Uname: Linux 5.13.0-19-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu73 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.465 Date: Wed Nov 24 04:21:04 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz nomodeset file=/cdrom/preseed/xubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Xubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211124) ProcEnviron: LANGUAGE=en_GB.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 LC_NUMERIC=C.UTF-8 RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ubiquity-21.10.10 xubuntu ** Attachment added: "partman" https://bugs.launchpad.net/bugs/1952028/+attachment/5542941/+files/partman -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1952028 Title: xubuntu jellyfish installer crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1952028/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945056] Re: Xorg freeze
This bug description can be closed like this Bug # 1945367 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945056 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: [nvidia] Graphics freeze
End off this bug !!! I have installed nvidia-driver-470 tested and updated by ubuntu, and the bug disappear !! I note that the version of the nvidia driver passed from 470.62 to 470.82, is it the reason why it works now ? i don't know. Thanks to the developer who have done the necessary :-) Have a good day. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: [nvidia] Graphics freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-470/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
@Chris Guiver Thanks for that info, Chris. I will perform a regular Live Session test for the time being, reporting my results. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
Because this bug prevents completion of Jammy Jellyfish installation it seems testing is halted for the time being until the issue is addressed. As this situation arose on 8-11-2021 and it seems to have had no attention since then I am guessing the developers consider this to be a matter of little or no importance at this time. I suspect that they are aware of what is holding things up and will return the daily-live releases to a state where testing can resume when they are ready. I also reason that until then bug reports for Jammy will be of no value. I will watch the proceedings with interest and wait until my efforts can be of some use. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
what is a masterbug? is it about to take over the universe and beyond? do we need to achieve herd immunity? should this be asked as a question? can we kill bugs without killing one another? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Ubuntu, Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
In addition to the above (in bug description):- Ubiquity crashes when user tries to run ISO QA testing by following the procedure from: http://iso.qa.ubuntu.com/qatracker/testcases/1302/info Ubuntu Desktop amd64 fails to install. Stops and throws up 'Installer Crashed' error message during slideshow. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu,Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install
Ubuntu Desktop amd64 fails to install on my system. Throws up 'Installer Crashed' error message during slideshow. Manual partitioned install to solid state drive, nvidia so using safe graphics and third party software, This problem first appeared in Jammy Jellyfish on 08-11-2021. Before that date all was working fine. Daily checks had proceeded with no problems. Again I humbly suggest some change was introduced between 07-11-2021 and 08-11-2021 and is the cause of this problem. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: Ubuntu,Budgie, Kubuntu, Kylin, MATE, Xubuntu: jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] Re: Kubuntu Jammy Jellyfish daily-live test install crashes
@ pqwoerituytrueiwoq your screen shot shows what happens with this bug it is what occurred during my attempted install did you follow through and file a bug report? I couldn't begin to guess what the problem is I only know I encounntered it on 2021-11-08 tests before that had completed successfully I hope someone with the expertise to deal with this comes along -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: Kubuntu Jammy Jellyfish daily-live test install crashes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] Re: Kubuntu jammy jellyfish daily test install crash
On 2021-11-07 daily-live Kubuntu Jammy Jellyfish INSTALLED without error. On 2021-11-08 a change had occurred which created bug 1950132. This change prevents/stops installation at the slideshow stage. I'm not a programmer or developer but I humbly suggest that a comparison of the changes from the 2021-11-07 version to the 2012-11-08 version might show where the problem lies. I think this is true for other flavours including Ubuntu itself. I would do such a comparison myself and deal with it if I knew how but my expertise is very limited.. ** Summary changed: - Kubuntu jammy jellyfish daily test install crash + Jammy Jellyfish daily test install crash ** Summary changed: - Jammy Jellyfish daily test install crash + Jammy Jellyfish daily-live test install crash ** Summary changed: - Jammy Jellyfish daily-live test install crash + Jammy Jellyfish daily-live test install crashes ** Description changed: making a test installation of latest daily jammy jellyfish [kubuntu 2204] install to a thumb drive successful begin install to PC using manual partitioning nVidia machine so using safe graphics install crashed just before completion - previous daily installed without error + previous daily (2021-11-07) installed without error ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubiquity 21.10.10 ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14 Uname: Linux 5.13.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu73 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.465 CurrentDesktop: KDE Date: Mon Nov 8 08:13:06 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz nomodeset file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211108) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: Jammy Jellyfish daily-live test install crashes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: xubuntu jammy daily fails to install
I think this is the same bug as 1950132. The process falls over during the installation in the slideshow. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: xubuntu jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1951399] Re: xubuntu jammy daily fails to install
Something similar to this occurred on a previous version of Kubuntu. I was test installing Kubuntu and I think it was Impish Indri. If I remember right the tool chain had just been installed and the problem was in there somewhere. I'm not a programmer or developer so I can't expand on that. I think tool chain might have something to do with it. My report on 2021-11-08 was the first instance of this bug, I had been testing every day with no problem until then. I posted at launchpad as soon as it cropped up. My report was bug 1950132. I'm happy to engage in further testing if this is useful. I'll watch this page. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1951399 Title: xubuntu jammy daily fails to install To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1951399/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] Re: jammy jellyfish daily test install crash
This bug has now appeared in two consecutive daily releases of kubuntu2204 reports made on each occasion crashed and failed Monday 08 November 2021 crashed and failed Tuesday 09 November 2021 before these dates daily installations passed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: jammy jellyfish daily test install crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842320] Re: Out of Memory on boot with 5.2.0 kernel
I had this issue as well, through ALL of the 5.x kernels. Tried everything mentioned in the thread here, but nothing worked other than going to 4.15 kernel. This gave me suspicions it was related to something with the UEFI handoff to OS, so I looked for BIOS updates and sure enough there was one from earlier this year. Updated to the latest BIOS from Intel, and everything boots fine and working now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842320 Title: Out of Memory on boot with 5.2.0 kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1842320/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] Re: jammy jellyfish daily test install crash
** Description changed: - making a test installation of latest daily jammy jellyfish [kubuntu 2204] from a memory stick + making a test installation of latest daily jammy jellyfish [kubuntu 2204] + install to a thumb drive successful + begin install to PC using manual partitioning nVidia machine so using safe graphics - install crashes before completion - cannot find /var/log/syslog - cannot find /var/log/partman + install crashed just before completion + previous daily installed without error ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubiquity 21.10.10 ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14 Uname: Linux 5.13.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu73 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.465 CurrentDesktop: KDE Date: Mon Nov 8 08:13:06 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz nomodeset file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211108) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: jammy jellyfish daily test install crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] Re: jammy jellyfish daily test install crash
** Summary changed: - jammy jellyfish alpha test install crash + jammy jellyfish daily test install crash -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: jammy jellyfish daily test install crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1950132] [NEW] jammy jellyfish alpha test install crash
Public bug reported: making a test installation of latest daily jammy jellyfish [kubuntu 2204] from a memory stick nVidia machine so using safe graphics install crashes before completion cannot find /var/log/syslog cannot find /var/log/partman ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubiquity 21.10.10 ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14 Uname: Linux 5.13.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu73 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.465 CurrentDesktop: KDE Date: Mon Nov 8 08:13:06 2021 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz nomodeset file=/cdrom/preseed/kubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Kubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211108) RebootRequiredPkgs: Error: path contained symlinks. SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy kubuntu ubiquity-21.10.10 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1950132 Title: jammy jellyfish alpha test install crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1950132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1811724] Re: libbd_mdraid.so.2: cannot open shared object file
I encountered something very similar to this issue (maybe even this issue?) when my docker containers could not start (using snap on Ubuntu 20.04.3 LTS under VirtualBox with a Windows 10 host). Similar to others, `sudo apt install libblockdev-mdraid2` seems to have fixed it. In case these log lines are useful context, they came from `sudo grep fail /var/log/syslog` (just trying to filter out some of the noise and I suspect that the devmapper/containerd/cni bits are not directly related): Nov 4 05:22:48 docker kernel: [0.305507] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. Nov 4 05:22:48 docker systemd[1]: Starting GRUB failed boot detection... Nov 4 05:22:48 docker systemd[1]: Finished GRUB failed boot detection. Nov 4 05:22:48 docker udisksd[731]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory Nov 4 05:22:48 docker containerd[733]: time="2021-11-04T05:22:48.627329367Z" level=warning msg="failed to load plugin io.containerd.snapshotter.v1.devmapper" error="devmapper not configured" Nov 4 05:22:48 docker containerd[733]: time="2021-11-04T05:22:48.635107136Z" level=error msg="failed to load cni during init, please check CRI plugin status before setting up network for pods" error="cni config load failed: no network config found in /etc/cni/net.d: cni plugin not initialized: failed to load cni config" Nov 4 05:22:49 docker docker.dockerd[719]: snap-update-ns failed with code 1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1811724 Title: libbd_mdraid.so.2: cannot open shared object file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udisks2/+bug/1811724/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1853665] Re: Realtek RTL8821CE [10ec:c821] Subsystem [103c:831a] Bluetooth not probed
The issue still persists with kernel 5.13 and the impish driver Why doesn't the maintainers of this driver use some of the code of tomaspinho driver? I read on Linux Mint forum that some people got bluetooth working with that driver. Link to repo: https://github.com/tomaspinho/rtl8821ce/ Link to LM forum thread: https://forums.linuxmint.com/viewtopic.php?t=308215 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1853665 Title: Realtek RTL8821CE [10ec:c821] Subsystem [103c:831a] Bluetooth not probed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1853665/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: [nvidia] Graphics freeze
Hello, Since the last message, i have : - Install KDE Desktop - Modify parameters Xrender, OpenGL2.0, OpenGL3.0 - Try to install Nvidia drivers 470, NVIDIA drivers 460 Unfortunately, I encounter always the freeze of the screen in each configuration and i have to reboot my pc to get back the hand (or connect with ssh from an other pc to do a reboot). I'm joining 3 reports of breakdown, two with nvidia drivers 460 and one with nvidia drivers version 470. (with command : journalctl -b-1 > prevboot.txt) Thank you for help ** Attachment added: "Report.tar.gz" https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-470/+bug/1945367/+attachment/5530560/+files/Report.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: [nvidia] Graphics freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-470/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: [nvidia] Graphics freeze
Hello, What is the next step ? Thanks -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: [nvidia] Graphics freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-470/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: Xorg crash with Nvidia drivers after installation
Hello, Here the file asked. ** Attachment added: "prevboot.txt" https://bugs.launchpad.net/ubuntu/+bug/1945367/+attachment/5529591/+files/prevboot.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: Xorg crash with Nvidia drivers after installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945311] Re: Fix for CVE-2021-40438 breaks existing configs
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-0604 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945311 Title: Fix for CVE-2021-40438 breaks existing configs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1945311/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: Xorg crash with Nvidia drivers after installation
When i use windows 10 64bits, i don't have any problem whatever use I make of my pc. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: Xorg crash with Nvidia drivers after installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: Xorg crash with Nvidia drivers after installation
** Attachment added: "ProcedureBugFreeze.pdf" https://bugs.launchpad.net/ubuntu/+bug/1945367/+attachment/5529179/+files/ProcedureBugFreeze.pdf -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: Xorg crash with Nvidia drivers after installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] Re: Xorg crash with Nvidia drivers after installation
Thank you for this answer. 1. no files found into /var/crash directory 2. no links in the URL https://errors.ubun 3. i repeat the freeze, but there is no changes (no /var/crash, no URL). To be clear, i push en pdf with the description of how to reproduce the bug and some new information. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: Xorg crash with Nvidia drivers after installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945056] Re: Xorg freeze
i have create a new bug report because problem is already present despite re installation from 0 of ubuntu distribution. Thank you for help Bug #1945367 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945056 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945367] [NEW] Xorg crash with Nvidia drivers after installation
Public bug reported: i open a second bug report because i have already freeze problem after the installation of nvidia drivers and reboot. Freeze become generally when i am using firefox and visioning a video with youtube. I specify that since the last bug report, i re install ubuntu with official .iso without other package non official. To create the report, i have to connect to the PC from another one with ssh. When i use ubuntu-bug, it is not possible to join nvidia-bug-report because the application dont give me the hand to finish the report. When i try to execute nvidia-bug-report, i have the same thing. To use the PC, i have to use nouveau drivers and intel Xe GPU with poor performances ... Thanks for help. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.capabilities.gpu0: Error: path was not a regular file. .proc.driver.nvidia.capabilities.mig: Error: path was not a regular file. .proc.driver.nvidia.gpus..01.00.0: Error: path was not a regular file. .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 470.63.01 Tue Aug 3 20:44:16 UTC 2021 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip Date: Tue Sep 28 21:13:05 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia, 470.63.01, 5.11.0-37-generic, x86_64: installed virtualbox, 6.1.26, 5.11.0-36-generic, x86_64: installed virtualbox, 6.1.26, 5.11.0-37-generic, x86_64: installed ExtraDebuggingInterest: No GraphicsCard: Intel Corporation Device [8086:9a49] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2090] NVIDIA Corporation TU106 [GeForce RTX 2060] [10de:1f15] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2090] InstallationDate: Installed on 2021-09-26 (1 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) MachineType: Intel(R) Client Systems NUC11PHi7 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=24658b6f-3e37-4376-bc2e-2207e961c9c8 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg crash UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/07/2021 dmi.bios.release: 5.19 dmi.bios.vendor: Intel Corp. dmi.bios.version: PHTGL579.0063.2021.0707.1057 dmi.board.name: NUC11PHBi7 dmi.board.vendor: Intel Corporation dmi.board.version: M26151-402 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.ec.firmware.release: 12.19 dmi.modalias: dmi:bvnIntelCorp.:bvrPHTGL579.0063.2021.0707.1057:bd07/07/2021:br5.19:efr12.19:svnIntel(R)ClientSystems:pnNUC11PHi7:pvrM26149-403:skuSWNUC11PHKi7C00:rvnIntelCorporation:rnNUC11PHBi7:rvrM26151-402:cvnIntelCorporation:ct35:cvr2.0: dmi.product.family: PH dmi.product.name: NUC11PHi7 dmi.product.sku: SWNUC11PHKi7C00 dmi.product.version: M26149-403 dmi.sys.vendor: Intel(R) Client Systems version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug crash focal ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945367 Title: Xorg crash with Nvidia drivers after installation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1945367/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906476] Re: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, >z_sa_hdl)) failed
Will new media be available w/ this fix in place? I ask because running "dkms status" or any dkms command presently triggers this bug for me, and the only way forward I can see to being able to fix that system is new media w/ a patched kernel. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906476 Title: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, >z_sa_hdl)) failed To manage notifications about this bug go to: https://bugs.launchpad.net/zfs/+bug/1906476/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1945056] [NEW] Xorg freeze
Public bug reported: This bug is coming when i install nvidia driver. Generally it appears when i use firefox and i am visioning a video. I have to install the intel drivers to use my pc normally whithout this freze. Thanks for help. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-36.40~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-36-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.capabilities.gpu0: Error: path was not a regular file. .proc.driver.nvidia.capabilities.mig: Error: path was not a regular file. .proc.driver.nvidia.gpus..01.00.0: Error: path was not a regular file. .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 470.57.02 Tue Jul 13 16:14:05 UTC 2021 GCC version: gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip Date: Sat Sep 25 16:46:27 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: nvidia-srv, 470.57.02, 5.11.0-36-generic, x86_64: installed virtualbox, 6.1.26, 5.11.0-34-generic, x86_64: installed virtualbox, 6.1.26, 5.11.0-36-generic, x86_64: installed ExtraDebuggingInterest: Yes GpuHangFrequency: Very infrequently GraphicsCard: Intel Corporation Device [8086:9a49] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2090] NVIDIA Corporation TU106 [GeForce RTX 2060] [10de:1f15] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2090] InstallationDate: Installed on 2021-08-21 (35 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) MachineType: Intel(R) Client Systems NUC11PHi7 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-36-generic root=UUID=4d66292e-7bd1-49de-917f-1785b713335d ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/07/2021 dmi.bios.release: 5.19 dmi.bios.vendor: Intel Corp. dmi.bios.version: PHTGL579.0063.2021.0707.1057 dmi.board.name: NUC11PHBi7 dmi.board.vendor: Intel Corporation dmi.board.version: M26151-402 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.ec.firmware.release: 12.19 dmi.modalias: dmi:bvnIntelCorp.:bvrPHTGL579.0063.2021.0707.1057:bd07/07/2021:br5.19:efr12.19:svnIntel(R)ClientSystems:pnNUC11PHi7:pvrM26149-403:skuSWNUC11PHKi7C00:rvnIntelCorporation:rnNUC11PHBi7:rvrM26151-402:cvnIntelCorporation:ct35:cvr2.0: dmi.product.family: PH dmi.product.name: NUC11PHi7 dmi.product.sku: SWNUC11PHKi7C00 dmi.product.version: M26149-403 dmi.sys.vendor: Intel(R) Client Systems version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.107+git2109250500.122ff0~oibaf~f version.libgl1-mesa-dri: libgl1-mesa-dri 21.3~git2109250600.db9946~oibaf~f version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: ubuntu Importance: Undecided Status: New ** Tags: amd64 apport-bug focal freeze third-party-packages ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1945056 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945056/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1918733] Re: file integrity check provides no feedback to the user
This bug appears to be fixed in Kubuntu Focal 20.04.03 but not in dailies for Kubuntu Impish, at this time. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1918733 Title: file integrity check provides no feedback to the user To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/1918733/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1937897] Re: GPIO error logs in start and dmesg after update of kernel
These two error messages display when booting and closing live disk media using 'safe graphics' gpio gpiochip: (gpio_aaeon): tried to insert a GPIO chip with zero lines gpiochip_add_data_with_key: GPIOs 0..-1 (gpio_aaeon) failed to register, -22 they do not seem to upset the processes of the media this occurs with Kubunt Impish daily builds and also with Kubuntu 2004.3 daily build -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1937897 Title: GPIO error logs in start and dmesg after update of kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1937897/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1937115] Re: Unable to boot/install Impish daily in UEFI boot mode
The matter reported in post #92 appears to be in process of being dealt with in Bug#1937897 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1937115 Title: Unable to boot/install Impish daily in UEFI boot mode To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1937115/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1937115] Re: Unable to boot/install Impish daily in UEFI boot mode
recently... while booting the ISO image for the Impish live build the following error lines are displayed: [ 1.501001] gpio gpiochip: (gpio_aaeon): tried to insert a GPIO chip with zero lines [ 1.501013] gpiochip_add_data_with_key: GPIOs O..-1 (gpio_aaeon) failed to register. -22 [ 0.197133] gpio gpiochip: (gpio_aaeon): tried to insert a GPIO chip with zero lines [ 0.197161] gpiochip_add_data_with_key: GPIOs O..-1 (gpio_aaeon) failed to register. -22 After a pause the iso then continues to boot and a successful installation proceeds without any signs of further error. this first occurred at 20210820 (since fix released) I have an own build PC with nVidia graphics and use 'safe graphics' to boot the iso Prior to this I was not experiencing the problems that had been occurring with Dell laptops. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1937115 Title: Unable to boot/install Impish daily in UEFI boot mode To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1937115/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1871797] Re: syntax error in desktop file
So, when the fix applied to the release? This is more than 4 months since the fix available. I remember, maybe a month ago, I manually edit "/usr/share/applications/screensavers/glitchpeg.desktop" to remove the newline, but for some reason, the file is overwritten to the old one that broken, probably during "apt upgrade". $ ls --full-time /usr/share/applications/screensavers/glitchpeg.desktop -rw-r--r-- 1 root root 389 2019-01-28 04:40:05.0 +0700 /usr/share/applications/screensavers/glitchpeg.desktop -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1871797 Title: syntax error in desktop file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1871797/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1930121] Re: package ubuntu-advantage-tools 27.0.2~18.04.1 - ModuleNotFoundError: No module named 'uaclient'
This bug can also be triggered if the user has a virtual python env active. The post install script uses the python version from the callers environment instead of the system version for which ubuntu-advantage- tools was installed. I think it would be safe to hardcode the python bin path in the post install script since it is built for that version only. # python -m venv test # . test/bin/activate (test) # apt install --force-reinstall=true ubuntu-advantage-tools Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/686 kB of archives. After this operation, 0 B of additional disk space will be used. Preconfiguring packages ... (Reading database ... 130029 files and directories currently installed.) Preparing to unpack .../ubuntu-advantage-tools_27.2.2~18.04.1_amd64.deb ... Unpacking ubuntu-advantage-tools (27.2.2~18.04.1) over (27.2.2~18.04.1) ... Setting up ubuntu-advantage-tools (27.2.2~18.04.1) ... Traceback (most recent call last): File "", line 2, in ModuleNotFoundError: No module named 'uaclient' dpkg: error processing package ubuntu-advantage-tools (--configure): installed ubuntu-advantage-tools package post-installation script subprocess returned error exit status 1 Processing triggers for man-db (2.8.3-2ubuntu0.1) ... Errors were encountered while processing: ubuntu-advantage-tools E: Sub-process /usr/bin/dpkg returned an error code (1) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1930121 Title: package ubuntu-advantage-tools 27.0.2~18.04.1 - ModuleNotFoundError: No module named 'uaclient' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-advantage-tools/+bug/1930121/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1664006] Re: I wish window control buttons scaled in size with window title font size
Hi Norbert, The situation still exists. I'm running Ubuntu-Mate 20.04.02 fully updated on a Dell Inspiron 7995 with NVIDIA GTX 960m graphics . The window control buttons are a fixed size in relation to the Window title font size. See the attached screen shot. If you increase or decrease the window title font size the window control buttons remain fixed. ** Attachment added: "screen shot" https://bugs.launchpad.net/ubuntu-mate/+bug/1664006/+attachment/5515613/+files/Screenshot%20at%202021-08-03%2022-02-54.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1664006 Title: I wish window control buttons scaled in size with window title font size To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1664006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1936707] Re: test install Kubuntu Impish crashes at end of install process
This was caused by downloading a different version of the files than was intended. Once the correct version was in place everything behaved as it should. ** Changed in: ubuntu Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1936707 Title: test install Kubuntu Impish crashes at end of install process To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1936707/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
