[Bug 1889005] [NEW] Can no longer print to network printer
Public bug reported: I believe that a recent update has broken the ability of this laptop to print to a network printer. HPLIP reports that it is unable to communicate with the printer although the machine to which the printer is directly connected (via USB cable) has normal print function. The command hp-check -i gives the following output don@Homebrew ~ $ hp-check -i Saving output in log file: /home/don/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.3) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --- | SYSTEM INFO | --- Kernel: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux Host: Homebrew Proc: 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit --- | HPLIP CONFIGURATION | --- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.3 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/simple-scan %SANE_URI% [fax] email_address = voice_phone = [last_used] device_uri = hp:/usb/HP_LaserJet_M203-M206?serial=VNB3B86941 printer_name = working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1592057498 notify_upgrade = false pending_upgrade_time = 0 [installation] date_time = 07/26/20 10:10:55 version = 3.20.3 - | External Dependencies | - error: cups CUPS - Common Unix Printing System REQUIRED1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED7.059.50OK - error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL0.9 - MISSING'xsane
[Bug 1735587] [NEW] Machine can't calculate update. Updates fine from terminal.
Public bug reported: When I use the Software Updater GUI I get an error message. However, I have updated from the command line and that ran without issues. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.23 ProcVersionSignature: Ubuntu 4.4.0-102.125-generic 4.4.98 Uname: Linux 4.4.0-102-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.14 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: Unity Date: Thu Nov 30 16:44:36 2017 InstallationDate: Installed on 2017-01-08 (326 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Beta amd64 (20170108) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader UpgradeStatus: No upgrade log present (probably fresh install) VarLogDistupgradeTermlog: ** Affects: ubuntu-release-upgrader (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug dist-upgrade xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1735587 Title: Machine can't calculate update. Updates fine from terminal. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1735587/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1692237] [NEW] package grub-efi-amd64 2.02~beta2-36ubuntu3.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
*** This bug is a duplicate of bug 1692175 *** https://bugs.launchpad.net/bugs/1692175 Public bug reported: update > upgrade > reinstalling grub did not solve this ProblemType: Package DistroRelease: Ubuntu 16.04 Package: grub-efi-amd64 2.02~beta2-36ubuntu3.10 ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67 Uname: Linux 4.4.0-79-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 Date: Sat May 20 07:19:17 2017 DuplicateSignature: package:grub-efi-amd64:2.02~beta2-36ubuntu3.10 Setting up grub-efi-amd64 (2.02~beta2-36ubuntu3.10) ... /var/lib/dpkg/info/grub-efi-amd64.postinst: line 703: syntax error near unexpected token `fi' dpkg: error processing package grub-efi-amd64 (--configure): subprocess installed post-installation script returned error exit status 2 ErrorMessage: subprocess installed post-installation script returned error exit status 2 InstallationDate: Installed on 2017-01-08 (132 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Beta amd64 (20170108) ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-79-generic root=UUID=5c6a0269-0e8c-4872-bfb9-c2561b695721 ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.4ubuntu1.2 apt 1.2.21 SourcePackage: grub2 Title: package grub-efi-amd64 2.02~beta2-36ubuntu3.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub2 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package package-from-proposed third-party-packages xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1692237 Title: package grub-efi-amd64 2.02~beta2-36ubuntu3.10 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1692237/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1570556] Re: openvpn option is missing from the network configurations
That worked! Thank you very much. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1570556 Title: openvpn option is missing from the network configurations To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-openvpn/+bug/1570556/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1570556] Re: openvpn option is missing from the network configurations
I have the same problem. However, the package 'openvpn-gnome' is not found when I tried to install it. Any other suggestions? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1570556 Title: openvpn option is missing from the network configurations To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-openvpn/+bug/1570556/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 991192] Re: Windows go blank when position is swapped
No, no longer a problem. You may close it. Don On Wed, Jan 8, 2014 at 7:40 PM, Christopher M. Penalver christopher.m.penal...@gmail.com wrote: DonKaron, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p xserver-xorg-video-nouveau REPLACE-WITH-BUG-NUMBER Please note, given that the information from the prior release is already available, doing this on a release prior to the development one would not be helpful. Thank you for your understanding. Helpful bug reporting tips: https://wiki.ubuntu.com/ReportingBugs ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Importance: Undecided = Low ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/991192 Title: Windows go blank when position is swapped Status in “xserver-xorg-video-nouveau” package in Ubuntu: Incomplete Bug description: Just upgraded to 12.04 via clean install but preserving my old data files. Now using Gnome fallback to preserve the desktop and work-flow that I am familiar with. Also using Compiz, rotating cube enabled. Here is the bug: when two windows overlap in a given desktop and I click the partially covered one in order to bring it to the front the change of position takes place but both windows go blank. If I minimize and then restore the window the contents return to the display. If I click again on the window that was originally on top that, too, restores the display. If the windows do not overlap then there is no problem switching between them. This started yesterday with the upgrade. Don't now if it is a bug in 12.04 or Compiz or elsewhere. Hope this helps. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,mousepoll,vpswitch,move,resize,grid,gnomecompat,snap,imgpng,place,regex,session,animation,animationaddon,fade,cube,expo,scale,workarounds,rotate,ezoom] CompositorRunning: compiz Date: Sun Apr 29 08:31:52 2012 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu DkmsStatus: nvidia-current, 295.40, 3.2.0-23-generic, x86_64: installed nvidia-current, 295.40, 3.2.0-24-generic, x86_64: installed vboxhost, 4.1.14, 3.2.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GF106 [GeForce GTX 460M] [10de:0dd1] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:5102] InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) JockeyStatus: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Enabled, In use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Disabled, Not in use) MachineType: System76, Inc. Gazelle Professional ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section Device Identifier Default Device Option NoLogoTrue EndSection dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc
Re: [Bug 991192] Re: Windows go blank when position is swapped
Thanks. Don On Thu, Jun 21, 2012 at 5:41 PM, pampanga 991...@bugs.launchpad.net wrote: Not sure if this is where i should post this.. Anyways, Ive installed and or upgraded ubuntu 12.04 on a few laptops and desktops and there is no issue such as this one on any of those systems. None of them has compiz. So I suspected that it might be that something in the compiz is causing this issue. I systematically turned off and on some of the effects under CCSM and found the culprit under the Animations Plugin I tabbed to Focus Animation. I had the Focus Effect set to Dodge. I changed it to None. Problem solved! hope this help someone out there. -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/991192 Title: Windows go blank when position is swapped Status in “xserver-xorg-video-nouveau” package in Ubuntu: Confirmed Bug description: Just upgraded to 12.04 via clean install but preserving my old data files. Now using Gnome fallback to preserve the desktop and work-flow that I am familiar with. Also using Compiz, rotating cube enabled. Here is the bug: when two windows overlap in a given desktop and I click the partially covered one in order to bring it to the front the change of position takes place but both windows go blank. If I minimize and then restore the window the contents return to the display. If I click again on the window that was originally on top that, too, restores the display. If the windows do not overlap then there is no problem switching between them. This started yesterday with the upgrade. Don't now if it is a bug in 12.04 or Compiz or elsewhere. Hope this helps. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,mousepoll,vpswitch,move,resize,grid,gnomecompat,snap,imgpng,place,regex,session,animation,animationaddon,fade,cube,expo,scale,workarounds,rotate,ezoom] CompositorRunning: compiz Date: Sun Apr 29 08:31:52 2012 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu DkmsStatus: nvidia-current, 295.40, 3.2.0-23-generic, x86_64: installed nvidia-current, 295.40, 3.2.0-24-generic, x86_64: installed vboxhost, 4.1.14, 3.2.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GF106 [GeForce GTX 460M] [10de:0dd1] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:5102] InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) JockeyStatus: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Enabled, In use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Disabled, Not in use) MachineType: System76, Inc. Gazelle Professional ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section Device Identifier Default Device Option NoLogoTrue EndSection dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. version.compiz: compiz 1:0.9.7.6-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu35 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3 version.nvidia-graphics-drivers:
[Bug 991192] [NEW] Windows go blank when position is swapped
Public bug reported: Just upgraded to 12.04 via clean install but preserving my old data files. Now using Gnome fallback to preserve the desktop and work-flow that I am familiar with. Also using Compiz, rotating cube enabled. Here is the bug: when two windows overlap in a given desktop and I click the partially covered one in order to bring it to the front the change of position takes place but both windows go blank. If I minimize and then restore the window the contents return to the display. If I click again on the window that was originally on top that, too, restores the display. If the windows do not overlap then there is no problem switching between them. This started yesterday with the upgrade. Don't now if it is a bug in 12.04 or Compiz or elsewhere. Hope this helps. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,mousepoll,vpswitch,move,resize,grid,gnomecompat,snap,imgpng,place,regex,session,animation,animationaddon,fade,cube,expo,scale,workarounds,rotate,ezoom] CompositorRunning: compiz Date: Sun Apr 29 08:31:52 2012 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu DkmsStatus: nvidia-current, 295.40, 3.2.0-23-generic, x86_64: installed nvidia-current, 295.40, 3.2.0-24-generic, x86_64: installed vboxhost, 4.1.14, 3.2.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GF106 [GeForce GTX 460M] [10de:0dd1] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:5102] InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) JockeyStatus: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Enabled, In use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Disabled, Not in use) MachineType: System76, Inc. Gazelle Professional ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section Device Identifier Default Device Option NoLogoTrue EndSection dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. version.compiz: compiz 1:0.9.7.6-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu35 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 precise regression-update ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/991192 Title: Windows go blank when position is swapped To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/991192/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 991192] Re: Windows go blank when position is swapped
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/991192 Title: Windows go blank when position is swapped To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/991192/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 801642] Re: Canon Lide 60 doesn't return to ready position after scan
Yes, multi page scans seem normal. I'll check the backend files. Don On Jan 12, 2012 7:56 AM, Michael Nagel ubu...@nailor.devzero.de wrote: Hi Don, I do not own an epson scanner so I cannot really help you with iscan, but I heard it helped people in many cases, so you should keep trying to get that working. Did you upgrade Ubuntu/sane/sane-backends/simple-scan/... when the problem happened first? The problem happens when cancelling a scan job as well as after successfully finishing a single-page scan but does not happen, when scanning multiple pages, right? Michael -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/801642 Title: Canon Lide 60 doesn't return to ready position after scan Status in “simple-scan” package in Ubuntu: Incomplete Bug description: Canon Lide 60 scanner used to move the scan head back to the ready-to- start position after it scanned a page. Now it stops at the end of the scanning process and doesn't move back to the ready position. I've been unable to correct this. Suggestions? ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: simple-scan 2.32.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Jun 24 09:12:28 2011 DriverPackageVersions: libsane 1.0.22~git20101223-0ubuntu1 libsane-extras N/A hplip 3.10.6-1ubuntu10.2 hpoj N/A InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: System76, Inc. Gazelle Professional ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash pcie_aspm=off ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SimpleScanLog: SourcePackage: simple-scan dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Canon Lide 60 doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 801642] Re: Scanner doesn't return to ready position after scan
Michael - I've been unable to install iscan in my 64 bit Ubuntu, still working on it. When I use scan all pages in SimpleScan the scanner cycles continuously. Since it is a flatbed scanner (and it moves slowly) I have time to swap out the scanned page and place the next page. So for multipage scans that will work well. What puzzles me, and what got me to post the bug report in the first place, was that the scanner previously behaved differently than it does now. Specifically, it used to return to the ready position after a single page was scanned. One day it stopped doing that and I don't know why. Don On Mon, Jan 9, 2012 at 2:53 PM, Donald Karon don.ka...@gmail.com wrote: Michael - It has the same problem with xsane. When I cancel a scan that is partly finished, either in xsane or simplescan, the scanner stops where it is and does not return to the ready position. I am trying to install iscan but can only find it as 32 bit package. I will try tonight to get it to install in 64 bit Ubuntu. Don On Mon, Jan 9, 2012 at 2:32 PM, Michael Nagel ubu...@nailor.devzero.dewrote: OK, but when you hit scan again and cancel (shortly) after that, does it return and stop before starting a new scan? Also, do you iscan installed, it might ship some drivers. Also, could you test it with iscan and with xsane? -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan Status in “simple-scan” package in Ubuntu: Incomplete Bug description: Canon Lide 60 scanner used to move the scan head back to the ready-to- start position after it scanned a page. Now it stops at the end of the scanning process and doesn't move back to the ready position. I've been unable to correct this. Suggestions? ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: simple-scan 2.32.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Jun 24 09:12:28 2011 DriverPackageVersions: libsane 1.0.22~git20101223-0ubuntu1 libsane-extras N/A hplip 3.10.6-1ubuntu10.2 hpoj N/A InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: System76, Inc. Gazelle Professional ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash pcie_aspm=off ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SimpleScanLog: SourcePackage: simple-scan dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 801642] Re: Scanner doesn't return to ready position after scan
Thanks for the reply. As you suggested I tried the scanner (Canon Lide 60 flatbed scanner) with the preference set to scan front and back, front only, back only, and in all cases the scanner does not return to the ready-to-scan position until the next time I hit the scan button. Don Karon On Sat, Jan 7, 2012 at 4:35 PM, Michael Nagel ubu...@nailor.devzero.dewrote: Please check if the steps mentioned in Bug #711821 help in this case, too. ** Changed in: simple-scan (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan Status in “simple-scan” package in Ubuntu: Incomplete Bug description: Canon Lide 60 scanner used to move the scan head back to the ready-to- start position after it scanned a page. Now it stops at the end of the scanning process and doesn't move back to the ready position. I've been unable to correct this. Suggestions? ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: simple-scan 2.32.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Jun 24 09:12:28 2011 DriverPackageVersions: libsane 1.0.22~git20101223-0ubuntu1 libsane-extras N/A hplip 3.10.6-1ubuntu10.2 hpoj N/A InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: System76, Inc. Gazelle Professional ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash pcie_aspm=off ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SimpleScanLog: SourcePackage: simple-scan dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 801642] Re: Scanner doesn't return to ready position after scan
Michael - It has the same problem with xsane. When I cancel a scan that is partly finished, either in xsane or simplescan, the scanner stops where it is and does not return to the ready position. I am trying to install iscan but can only find it as 32 bit package. I will try tonight to get it to install in 64 bit Ubuntu. Don On Mon, Jan 9, 2012 at 2:32 PM, Michael Nagel ubu...@nailor.devzero.dewrote: OK, but when you hit scan again and cancel (shortly) after that, does it return and stop before starting a new scan? Also, do you iscan installed, it might ship some drivers. Also, could you test it with iscan and with xsane? -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan Status in “simple-scan” package in Ubuntu: Incomplete Bug description: Canon Lide 60 scanner used to move the scan head back to the ready-to- start position after it scanned a page. Now it stops at the end of the scanning process and doesn't move back to the ready position. I've been unable to correct this. Suggestions? ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: simple-scan 2.32.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Jun 24 09:12:28 2011 DriverPackageVersions: libsane 1.0.22~git20101223-0ubuntu1 libsane-extras N/A hplip 3.10.6-1ubuntu10.2 hpoj N/A InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: System76, Inc. Gazelle Professional ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash pcie_aspm=off ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SimpleScanLog: SourcePackage: simple-scan dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 883893] [NEW] +/- key bug
Public bug reported: For numbers between 1000 and if you press the sign change key (the +/- key) the value in the display register will be changed although no operation is supposed to have taken place other than sign reversal. For example: enter 3600, hit +/- two times and the value displayed is changed to 3000. ** Affects: galculator (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/883893 Title: +/- key bug To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/galculator/+bug/883893/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 801642] [NEW] Scanner doesn't return to ready position after scan
Public bug reported: Canon Lide 60 scanner used to move the scan head back to the ready-to- start position after it scanned a page. Now it stops at the end of the scanning process and doesn't move back to the ready position. I've been unable to correct this. Suggestions? ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: simple-scan 2.32.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Jun 24 09:12:28 2011 DriverPackageVersions: libsane 1.0.22~git20101223-0ubuntu1 libsane-extras N/A hplip 3.10.6-1ubuntu10.2 hpoj N/A InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: System76, Inc. Gazelle Professional ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=198e494b-64d5-4269-97bc-b08c411b8b60 ro quiet splash pcie_aspm=off ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SimpleScanLog: SourcePackage: simple-scan dmi.bios.date: 03/03/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.4 dmi.board.asset.tag: Not Applicable dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp6 dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: System76, Inc. dmi.chassis.version: gazp6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd03/03/2011:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp6:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp6:cvnSystem76,Inc.:ct10:cvrgazp6: dmi.product.name: Gazelle Professional dmi.product.version: gazp6 dmi.sys.vendor: System76, Inc. ** Affects: simple-scan (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug maverick -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 801642] Re: Scanner doesn't return to ready position after scan
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/801642 Title: Scanner doesn't return to ready position after scan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/801642/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 573114] Re: at bootup get can't mount /proc/usb/hub message
Blaine - Thanks for the note. I had to re-install 10.04 yesterday after the laptop was repaired. (IBM wiped the HDD. I had everything backed up but still wished they wouldn't have done that.) Anyway, after a fresh install, changing from ext3 to ext4, then installing 247 updates, the error message went away and boot time is significantly decreased. I will save your message in case Ubuntu suffers a regression again in the future. Don On Fri, Aug 13, 2010 at 9:45 AM, Blaine 573...@bugs.launchpad.net wrote: I know what usually causes this if anyone is interested. In 9.10 you need to add something like this to /etc/fstab: none /proc/bus/usb usbfs devgid=124,devmode=664 0 0 in order for virtualbox to be able to access usb. With 10.04, apparently, this line isn't needed and virtulbox can access usb out of the box. This line was left over on my laptop from 9.10 on my upgrade to 10.04 and caused my system to hang. This has happened to me twice: Once when I upgraded from 9.10 to 10.04 and today when I rebooted after a system update (using a fresh 10.04 install). When I did my original 9.10=10.04 upgrade, the system did not actually give me the 'Press S to Skip or M to manually mount' message on the splash screen; it just hung and was apparently waiting for a key press (s or m). I ended up doing a full wipe and reinstall, only to have the same error happen after I added the line to /etc/fstab when I installed virtualbox. Now I know that I could have avoided the entire wipe if only I had pressed s. Live and Learn, I suppose. So. To get rid of this message, try removing the /etc/fstab line regarding /proc/bus/usb if you have one. -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a direct subscriber of the bug. Status in “linux” package in Ubuntu: Expired Bug description: I installed 10.04 last night by upgrade. Now, at bootup, I get an error message Can't mount /proc/usb and boot will not proceed until I dismiss it by typing an s. The computer then goes on to boot without problems and everything works including USB sticks. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: amd64 ArecordDevices: shm_open() failed: Permission denied List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1405 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6EHT09WW-1.02' Mixer name : 'ThinkPad EC 6EHT09WW-1.02' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Date: Sat May 1 09:16:03 2010 GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit. HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 HotplugNewDevices: HotplugNewMounts: MachineType: LENOVO 2776P4U ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux Symptom: storage UdevMonitorLog: monitor will print the received events for: UDEV - the event which udev sends out after rule processing UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C to cancel. WpaSupplicantLog: dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/573114/+subscribe -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug
Re: [Bug 573114] Re: at bootup get can't mount /proc/usb/hub message
Jeremy - I tried this with the latest kernel version as of five minutes ago and I get the same error. I originally copied it down wrong. The correct error message is, An error ocurred while mounting /proc/bus/usb..Press S to skip mounting or M for manual recovery. Once again, pressing S allowed boot to proceed and all is well with the computer. Don Karon On Mon, May 3, 2010 at 3:28 PM, Jeremy Foshee jeremy.fos...@canonical.comwrote: Hi DonKaron, If you could also please test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results. Thanks in advance. [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.] ** Tags added: kj-triage ** Changed in: linux (Ubuntu) Status: New = Incomplete -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a direct subscriber of the bug. Status in “linux” package in Ubuntu: Incomplete Bug description: I installed 10.04 last night by upgrade. Now, at bootup, I get an error message Can't mount /proc/usb and boot will not proceed until I dismiss it by typing an s. The computer then goes on to boot without problems and everything works including USB sticks. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: amd64 ArecordDevices: shm_open() failed: Permission denied List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1405 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6EHT09WW-1.02' Mixer name : 'ThinkPad EC 6EHT09WW-1.02' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Date: Sat May 1 09:16:03 2010 GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit. HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 HotplugNewDevices: HotplugNewMounts: MachineType: LENOVO 2776P4U ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux Symptom: storage UdevMonitorLog: monitor will print the received events for: UDEV - the event which udev sends out after rule processing UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C to cancel. WpaSupplicantLog: dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/573114/+subscribe -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 573114] Re: at bootup get can't mount /proc/usb/hub message
Upstream testing done, same failure occurs. I initially quoted the error message incorrectly. The correct error message is, An error ocurred while mounting /proc/bus/usb.Press S to skip or M for manual recovery. -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 573114] [NEW] at bootup get can't mount /proc/usb/hub message
Public bug reported: I installed 10.04 last night by upgrade. Now, at bootup, I get an error message Can't mount /proc/usb and boot will not proceed until I dismiss it by typing an s. The computer then goes on to boot without problems and everything works including USB sticks. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: amd64 ArecordDevices: shm_open() failed: Permission denied List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1405 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6EHT09WW-1.02' Mixer name : 'ThinkPad EC 6EHT09WW-1.02' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Date: Sat May 1 09:16:03 2010 GvfsMonitorLog: Monitoring events. Press Ctrl+C to quit. HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 HotplugNewDevices: HotplugNewMounts: MachineType: LENOVO 2776P4U ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux Symptom: storage UdevMonitorLog: monitor will print the received events for: UDEV - the event which udev sends out after rule processing UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C to cancel. WpaSupplicantLog: dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid needs-upstream-testing regression-update -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 573114] Re: at bootup get can't mount /proc/usb/hub message
** Attachment added: AlsaDevices.txt http://launchpadlibrarian.net/46995165/AlsaDevices.txt ** Attachment added: AplayDevices.txt http://launchpadlibrarian.net/46995166/AplayDevices.txt ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/46995167/BootDmesg.txt ** Attachment added: Card0.Amixer.values.txt http://launchpadlibrarian.net/46995168/Card0.Amixer.values.txt ** Attachment added: Card0.Codecs.codec.0.txt http://launchpadlibrarian.net/46995169/Card0.Codecs.codec.0.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/46995170/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/46995171/Dependencies.txt ** Attachment added: IwConfig.txt http://launchpadlibrarian.net/46995172/IwConfig.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/46995173/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/46995174/Lsusb.txt ** Attachment added: PciMultimedia.txt http://launchpadlibrarian.net/46995175/PciMultimedia.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/46995176/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/46995177/ProcInterrupts.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/46995178/ProcModules.txt ** Attachment added: RfKill.txt http://launchpadlibrarian.net/46995179/RfKill.txt ** Attachment added: UdevDb.txt http://launchpadlibrarian.net/46995180/UdevDb.txt ** Attachment added: UdevLog.txt http://launchpadlibrarian.net/46995181/UdevLog.txt ** Attachment added: WifiSyslog.txt http://launchpadlibrarian.net/46995182/WifiSyslog.txt -- at bootup get can't mount /proc/usb/hub message https://bugs.launchpad.net/bugs/573114 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 461549] Re: [LENOVO 2776P4U] suspend/resume failure
Yes, it completely stopped happening several months ago. I have all updates to 9.10 as of April 2. I'm debating going to 10.04 when it's released, haven't made my mind up about it. I'm sure curiosity will get the better of me at some point. It has for every new release before now. Don On Mon, Apr 5, 2010 at 10:47 AM, Jeremy Foshee jeremy.fos...@canonical.comwrote: Hi DonKaron, This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ . If it remains an issue, could you run the following command from a Terminal (Applications-Accessories-Terminal). It will automatically gather and attach updated debug information to this report. apport-collect -p linux 461549 Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results. Thanks in advance. [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.] ** Tags added: kernel-suspend ** Tags added: needs-kernel-logs ** Tags added: needs-upstream-testing ** Tags added: kj-triage ** Changed in: linux (Ubuntu) Status: New = Incomplete -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a direct subscriber of the bug. Status in “linux” package in Ubuntu: Incomplete Bug description: Lenovo x301 failed to resume from suspend on first resume attempt after installation of 9.10 Release Candidate earlier today. ProblemType: KernelOops Annotation: This occured during a previous suspend and prevented it from resuming properly. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1960 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Date: Mon Oct 26 16:17:19 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 InterpreterPath: /usr/bin/python2.6 MachineType: LENOVO 2776P4U Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 SourcePackage: linux Tags: resume suspend Title: [LENOVO 2776P4U] suspend/resume failure Uname: Linux 2.6.31-14-generic x86_64 UserGroups: adm admin audio cdrom dialout dip fax fuse lpadmin netdev plugdev sambashare scanner tape vboxusers video dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/461549/+subscribe -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 461549] Re: [LENOVO 2776P4U] suspend/resume failure
One other thing: thank you *very* much for fixing this bug, it was really annoying. Don On Mon, Apr 5, 2010 at 11:30 AM, Donald Karon don.ka...@gmail.com wrote: Yes, it completely stopped happening several months ago. I have all updates to 9.10 as of April 2. I'm debating going to 10.04 when it's released, haven't made my mind up about it. I'm sure curiosity will get the better of me at some point. It has for every new release before now. Don On Mon, Apr 5, 2010 at 10:47 AM, Jeremy Foshee jeremy.fos...@canonical.com wrote: Hi DonKaron, This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ . If it remains an issue, could you run the following command from a Terminal (Applications-Accessories-Terminal). It will automatically gather and attach updated debug information to this report. apport-collect -p linux 461549 Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results. Thanks in advance. [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.] ** Tags added: kernel-suspend ** Tags added: needs-kernel-logs ** Tags added: needs-upstream-testing ** Tags added: kj-triage ** Changed in: linux (Ubuntu) Status: New = Incomplete -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a direct subscriber of the bug. Status in “linux” package in Ubuntu: Incomplete Bug description: Lenovo x301 failed to resume from suspend on first resume attempt after installation of 9.10 Release Candidate earlier today. ProblemType: KernelOops Annotation: This occured during a previous suspend and prevented it from resuming properly. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1960 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Date: Mon Oct 26 16:17:19 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 InterpreterPath: /usr/bin/python2.6 MachineType: LENOVO 2776P4U Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 SourcePackage: linux Tags: resume suspend Title: [LENOVO 2776P4U] suspend/resume failure Uname: Linux 2.6.31-14-generic x86_64 UserGroups: adm admin audio cdrom dialout dip fax fuse lpadmin netdev plugdev sambashare scanner tape vboxusers video dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/461549/+subscribe -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 467938] Re: [LENOVO 2776P4U] suspend/resume failure
Another occurrence of failure to resume, this time on the very first attempt, after a reboot, to resume. -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/467938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 467938] [NEW] [LENOVO 2776P4U] suspend/resume failure
Public bug reported: Failed to resume from suspend. Had been up for three and a half days, multiple suspend/resume cycles, before this episode. This laptop has failed to resume from suspend two other times since loading 9.10. It never ever failed to resume with any previous versions of Ubuntu. ProblemType: KernelOops Annotation: This occured during a previous suspend and prevented it from resuming properly. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1986 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Date: Sat Oct 31 22:01:44 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 InterpreterPath: /usr/bin/python2.6 MachineType: LENOVO 2776P4U Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 SourcePackage: linux Tags: resume suspend Title: [LENOVO 2776P4U] suspend/resume failure Uname: Linux 2.6.31-14-generic x86_64 UserGroups: adm admin audio cdrom dialout dip fax fuse lpadmin netdev plugdev sambashare scanner tape vboxusers video WpaSupplicantLog: dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops resume suspend -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/467938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 467938] Re: [LENOVO 2776P4U] suspend/resume failure
** Attachment added: AlsaDevices.txt http://launchpadlibrarian.net/34836204/AlsaDevices.txt ** Attachment added: AplayDevices.txt http://launchpadlibrarian.net/34836207/AplayDevices.txt ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/34836208/BootDmesg.txt ** Attachment added: Card0.Amixer.values.txt http://launchpadlibrarian.net/34836209/Card0.Amixer.values.txt ** Attachment added: Card0.Codecs.codec.0.txt http://launchpadlibrarian.net/34836210/Card0.Codecs.codec.0.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/34836211/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/34836212/Dependencies.txt ** Attachment added: IwConfig.txt http://launchpadlibrarian.net/34836213/IwConfig.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/34836215/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/34836216/Lsusb.txt ** Attachment added: PciMultimedia.txt http://launchpadlibrarian.net/34836217/PciMultimedia.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/34836218/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/34836219/ProcInterrupts.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/34836220/ProcMaps.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/34836223/ProcModules.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/34836224/ProcStatus.txt ** Attachment added: RfKill.txt http://launchpadlibrarian.net/34836225/RfKill.txt ** Attachment added: SleepLog.txt http://launchpadlibrarian.net/34836226/SleepLog.txt ** Attachment added: UdevDb.txt http://launchpadlibrarian.net/34836227/UdevDb.txt ** Attachment added: UdevLog.txt http://launchpadlibrarian.net/34836228/UdevLog.txt ** Attachment added: WifiSyslog.txt http://launchpadlibrarian.net/34836229/WifiSyslog.txt -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/467938 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 461549] Re: [LENOVO 2776P4U] suspend/resume failure
** Attachment added: AlsaDevices.txt http://launchpadlibrarian.net/34431526/AlsaDevices.txt ** Attachment added: AplayDevices.txt http://launchpadlibrarian.net/34431527/AplayDevices.txt ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/34431528/BootDmesg.txt ** Attachment added: Card0.Amixer.values.txt http://launchpadlibrarian.net/34431529/Card0.Amixer.values.txt ** Attachment added: Card0.Codecs.codec.0.txt http://launchpadlibrarian.net/34431530/Card0.Codecs.codec.0.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/34431531/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/34431532/Dependencies.txt ** Attachment added: IwConfig.txt http://launchpadlibrarian.net/34431533/IwConfig.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/34431534/Lspci.txt ** Attachment added: Lsusb.txt http://launchpadlibrarian.net/34431535/Lsusb.txt ** Attachment added: PciMultimedia.txt http://launchpadlibrarian.net/34431536/PciMultimedia.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/34431537/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/34431539/ProcInterrupts.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/34431540/ProcMaps.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/34431541/ProcModules.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/34431542/ProcStatus.txt ** Attachment added: RfKill.txt http://launchpadlibrarian.net/34431543/RfKill.txt ** Attachment added: SleepLog.txt http://launchpadlibrarian.net/34431544/SleepLog.txt ** Attachment added: UdevDb.txt http://launchpadlibrarian.net/34431545/UdevDb.txt ** Attachment added: UdevLog.txt http://launchpadlibrarian.net/34431546/UdevLog.txt ** Attachment added: WifiSyslog.txt http://launchpadlibrarian.net/34431547/WifiSyslog.txt ** Attachment added: WpaSupplicantLog.txt http://launchpadlibrarian.net/34431548/WpaSupplicantLog.txt -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 461549] [NEW] [LENOVO 2776P4U] suspend/resume failure
Public bug reported: Lenovo x301 failed to resume from suspend on first resume attempt after installation of 9.10 Release Candidate earlier today. ProblemType: KernelOops Annotation: This occured during a previous suspend and prevented it from resuming properly. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: don1960 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf062 irq 17' Mixer name : 'Conexant CX20561 (Hermosa)' Components : 'HDA:14f15051,17aa211f,0010' Controls : 14 Simple ctrls : 7 Date: Mon Oct 26 16:17:19 2009 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7ce42f56-86b9-4f13-b3a7-77a41b09d7f9 InterpreterPath: /usr/bin/python2.6 MachineType: LENOVO 2776P4U Package: linux-image-2.6.31-14-generic 2.6.31-14.48 ProcCmdLine: root=UUID=0ffacbda-ac07-43e9-b344-e5788b38 ro quiet splash ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) ProcVersionSignature: Ubuntu 2.6.31-14.48-generic RelatedPackageVersions: linux-backports-modules-2.6.31-14-generic N/A linux-firmware 1.24 SourcePackage: linux Tags: resume suspend Title: [LENOVO 2776P4U] suspend/resume failure Uname: Linux 2.6.31-14-generic x86_64 UserGroups: adm admin audio cdrom dialout dip fax fuse lpadmin netdev plugdev sambashare scanner tape vboxusers video dmi.bios.date: 10/09/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 6EET21WW (1.02 ) dmi.board.name: 2776P4U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6EET21WW(1.02):bd10/09/2008:svnLENOVO:pn2776P4U:pvrThinkPadX301:rvnLENOVO:rn2776P4U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2776P4U dmi.product.version: ThinkPad X301 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops resume suspend -- [LENOVO 2776P4U] suspend/resume failure https://bugs.launchpad.net/bugs/461549 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
