[Bug 419143] Re: Printing from evince (and perhaps other GTK apps) to PostScript printers is broken
Hi Unfortunately i can't do this because the documents contain confidential information. Can i help you in some other way to solve the problem? -- Printing from evince (and perhaps other GTK apps) to PostScript printers is broken https://bugs.launchpad.net/bugs/419143 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 419143] Re: Printing from evince (and perhaps other GTK apps) to PostScript printers is broken
Hello I just want to confirm this bug in the latest release of lucid (x86), with: cups1.4.3-1ubuntu1.2 libpoppler-glib4 0.12.4-0ubuntu5 libpoppler5 0.12.4-0ubuntu5 poppler-utils0.12.4-0ubuntu5 ievince2.30.3-0ubuntu1.1 using acroread as an alternative (although its non-free) solves the problem. Greets Thomas -- Printing from evince (and perhaps other GTK apps) to PostScript printers is broken https://bugs.launchpad.net/bugs/419143 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 566792] Re: metadata service returns empty data with 200 OK
Hi Can it be that with this packages, the initscripts on the CC and CLC have changed from eucalyptus-cloud (CLC) eucalyptus-CC (CC) to only "eucalyptus"? Because i installed the CC based on these packages and and "restart eucalyptus-cc" did nothing, whereas a "restart eucalyptus CLEAN=1" worked for me? Greets Thomas -- metadata service returns empty data with 200 OK https://bugs.launchpad.net/bugs/566792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585343] Re: maximum 9 virtual NICs in Ubuntu
I think the problem is related to the upgrade from Ubuntu 9.10 to 10.04. As i said i tested this on a fresh installed 10.04 LTS and there is no such issue. The machine where i encountered the problem was update from 9.10. Can somebody else confirm this? -- maximum 9 virtual NICs in Ubuntu https://bugs.launchpad.net/bugs/585343 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585343] Re: maximum 9 virtual NICs in Ubuntu
I just retestet this on another machine and now this issue seems to have gone away. I have to test further to see where this behaviour comes from. Thomas -- maximum 9 virtual NICs in Ubuntu https://bugs.launchpad.net/bugs/585343 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585343] Re: maximum 9 virtual NICs in Ubuntu
Hi I have changed the file thats the problem, but the original version was like: auto eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 gateway 192.168.0.1 auto eth0:1 iface eth0:1 inet static address 192.168.0.3 netmask 255.255.255.0 this eth0:X pattern was repeated until i had eth0:8. When i added the next virtual NIC eth0:9 and tried to restart the network config, i got the error saying "too much argmunents" To exclude that the error is related to the VMWARE/VMXNet Network Card you can test this with a physical machine (thats what i havent done so far). Greets Thomas -- maximum 9 virtual NICs in Ubuntu https://bugs.launchpad.net/bugs/585343 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 585343] [NEW] maximum 9 virtual NICs in Ubuntu
Public bug reported: I found a problem in Ubuntu 10.04 (x86) when i try to define more than 9 virtual network interfaces in /etc/network/interfaces (eth0:0 - eth 0:8). If i define more and restart the network config via /etc/init.d/networking restart, i always get an error like "too much parameters in /etc/network/interfaces". If i then manually bring the interfaces up using ifconfig everything works. The network card i used is VMXNET3 (paravirtualised, the host i have this problem is a VMWare image). Greets Thomas ** Affects: ubuntu Importance: Undecided Status: New -- maximum 9 virtual NICs in Ubuntu https://bugs.launchpad.net/bugs/585343 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 526918] Re: File sharing not working in karmic
** Attachment added: "logfile log.pc-lampe" http://launchpadlibrarian.net/45007170/log.pc-lampe -- File sharing not working in karmic https://bugs.launchpad.net/bugs/526918 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 561511] Re: eucalyptus NC doesn't recognize cache site
thats strange, after i started the first instance on this NC (it doesn't start due to errors) and restarted Eucalyptus-NC, this error went away and now i have in my nc.log ... [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] NC is looking for configuration in //etc/eucalyptus/eucalyptus.conf [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-nc-semaphore [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-nc-inst-semaphore [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-storage-semaphore [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] SC is looking for configuration in //etc/eucalyptus/eucalyptus.conf [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] euca_init_cert(): using file //var/lib/eucalyptus/keys/node-cert.pem [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] euca_init_cert(): using file //var/lib/eucalyptus/keys/node-pk.pem [Wed Apr 14 08:29:14 2010][020746][EUCADEBUG ] doInitialized() invoked [Wed Apr 14 08:29:14 2010][020746][EUCADEBUG ] system_output(): [//usr/lib/eucalyptus/euca_rootwrap //usr/share/eucalyptus/get_sys_info] [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] Using 4 cores [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] Using 24476 memory [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] looking for existing domains [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] no currently running domains to adopt [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] checking the integrity of instances directory (/var/lib/eucalyptus/instances) [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] checking the integrity of the cache directory (/var/lib/eucalyptus/instances/eucalyptus/cache) [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] - cached image eri-0923114F directory, size=3870627 [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] - cached image eki-F4AC10DE directory, size=3942356 [Wed Apr 14 08:29:14 2010][020746][EUCAINFO ] Maximum disk available = 439068 (under /var/lib/eucalyptus/instances) -- eucalyptus NC doesn't recognize cache site https://bugs.launchpad.net/bugs/561511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 561511] [NEW] eucalyptus NC doesn't recognize cache site
Public bug reported: On the eucalyptus NC, the VM-Dir cache size is not recognized. In my eucalyptus.conf (on the NC) i have: ... # This directory should be local to the Node Controller (as # opposed to a NFS share) for performance reasons. INSTANCE_PATH="/var/lib/eucalyptus/instances" # The maximum amount of disk space, in Megabytes, that Eucalyptus is # allowed to use in the cache directory (INSTANCES_PATH/eucalyptus/cache). # A generous size is recommended. Setting this to zero disables caching. NC_CACHE_SIZE="5" Once i restart the eucalyptus service via service eucalyptus-nc restart I get in the /var/log/eucalyptus/nc.log [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] NC is looking for configuration in //etc/eucalyptus/eucalyptus.conf [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-nc-semaphore [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-nc-inst-semaphore [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] sem_alloc(): cleaning up old semaphore eucalyptus-storage-semaphore [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] SC is looking for configuration in //etc/eucalyptus/eucalyptus.conf [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] euca_init_cert(): using file //var/lib/eucalyptus/keys/node-cert.pem [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] euca_init_cert(): using file //var/lib/eucalyptus/keys/node-pk.pem [Mon Apr 12 15:49:06 2010][018988][EUCADEBUG ] doInitialized() invoked [Mon Apr 12 15:49:06 2010][018988][EUCADEBUG ] system_output(): [//usr/lib/eucalyptus/euca_rootwrap //usr/share/eucalyptus/get_sys_info] [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] Using 4 cores [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] Using 24476 memory [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] looking for existing domains [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] no currently running domains to adopt [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] checking the integrity of instances directory (/var/lib/eucalyptus/instances) [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] checking the integrity of the cache directory ((null)) [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] no cache directory yet [Mon Apr 12 15:49:06 2010][018988][EUCAINFO ] Maximum disk available = 439105 (under /var/lib/eucalyptus/instances) [Mon Apr 12 15:49:06 2010][018988][EUCADEBUG ] doDescribeInstances() invoked [Mon Apr 12 15:49:06 2010][018988][EUCADEBUG ] Starting monitoring thread ! I have used these packages (from karmic-proposed): ii eucalyptus-common 1.6~bzr931-0ubuntu7.6 Elastic Utility Computing Architecture - Com ii eucalyptus-gl 1.6~bzr931-0ubuntu7.6 Elastic Utility Computing Architecture - Log ii eucalyptus-nc 1.6~bzr931-0ubuntu7.6 Elastic Utility Computing Architecture - Nod Greets Thomas ** Affects: eucalyptus (Ubuntu) Importance: Undecided Status: New -- eucalyptus NC doesn't recognize cache site https://bugs.launchpad.net/bugs/561511 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 559749] Re: typos on axis2c error messages
I can confirm this with UEC (seperate CLC, WS3, CC/SC and NCs). But btw what does this error mean, is it critical? -- typos on axis2c error messages https://bugs.launchpad.net/bugs/559749 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 560338] Re: bond mac adress is 00:00:00:00:00 in karmic
ii ifenslave-2.6 1.1.0-13ubuntu1 Attach and detach slave interfaces to a bond and /etc/modules shows bonding mode=1 miimon=100 primary=eth0 -- bond mac adress is 00:00:00:00:00 in karmic https://bugs.launchpad.net/bugs/560338 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 560338] [NEW] bond mac adress is 00:00:00:00:00 in karmic
Public bug reported: Binary package hint: ifenslave Hi I just setuped a active-failover bonding with 2 NICs in Ubuntu Karmic (Server Edition x86_64). Sometimes when the system starts up my bond0 has the mac address 00:00:00:00:00:00 and then on the next restart it gets the mac adress from eth0 and works again. My /etc/network/interfaces looks like: auto lo iface lo inet loopback allow eth0 iface eth0 inet static allow eth1 iface eth1 inet static # The primary network interface auto bond0 iface bond0 inet static address 10.144.67.3 netmask 255.255.254.0 network 10.144.67.0 broadcast 10.144.67.255 gateway 10.144.67.1 post-up ifenslave bond0 eth0 eth1 pre-down ifenslave -d bond0 eth0 eth1 If i change the value of "allow ethX" to "auto ethX" it doesn't change the behaviour. If i comment out the section of the 2 interfaces it doesn't change as well. Greets Thomas ** Affects: ifenslave (Ubuntu) Importance: Undecided Status: New -- bond mac adress is 00:00:00:00:00 in karmic https://bugs.launchpad.net/bugs/560338 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 556438] [NEW] network share rename directory
Public bug reported: Binary package hint: nautilus Hello I just found out that there is a problem when you activate the network-share on a folder using the nautilus-submenu. If i do this and set my options in the dialogue, everything works fine. But as soon as i rename the folder (or move it to another place) the settings are lost but the "shared-icon" still remains. When i move the folder back to its original place, the settings will be set automatically. I think it would be nice to have the ability when you move or rename a folder that the usershare settings will be changed automatically. OS: Ubuntu 9.10 Karmic x86 ii nautilus 1:2.28.1-0ubuntu3 file manager and graphical shell for GNOME ii nautilus-share 0.7.2-12 Nautilus extension to share folder using Samba Greets Thomas ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New -- network share rename directory https://bugs.launchpad.net/bugs/556438 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 526918] Re: File sharing not working in karmic
I tried the network-share again and now it works for me with both anonymous and authenticated-only access. The versions of the installed packages are: ii samba 2:3.4.0-3ubuntu5.6 SMB/CIFS file, print, and login server for Unix ii samba-common 2:3.4.0-3ubuntu5.6 common files used by both the Samba server and client ii samba-common-bin 2:3.4.0-3ubuntu5.6 common files used by both the Samba server and client However, i still see the "permission denied" errors in my log. logfile It seems to me like they occur every time i try to access the network share. Greets Thomy -- File sharing not working in karmic https://bugs.launchpad.net/bugs/526918 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 471266] Re: /etc/rc.local is not executed at startup
*** This bug is a duplicate of bug 453473 *** https://bugs.launchpad.net/bugs/453473 I can confirm this bug, for me the rc.local isn't exectued as well (it hast the rwx-r-xr-x flag) OS: Ubuntu 9.10 x86_64 ii upstart 0.6.3-10 event-based init daemon -- /etc/rc.local is not executed at startup https://bugs.launchpad.net/bugs/471266 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 526918] [NEW] File sharing not working in karmic
Public bug reported: Binary package hint: samba The file share feature of nautilus doesn't work for me in Ubuntu 9.10 (Desktop x86). I set up anonymous access and write-access in the gui for a directory but i cannot read files from it on a remote machine. The directory is /home/stather/VMs (drwxrwxrwx), and everything in this dir has rwxr-xr-x and in the samba log i get: [2010/02/24 10:28:16, 0] param/loadparm.c:8562(process_usershare_file) process_usershare_file: stat of /var/lib/samba/usershares/vms failed. Permission denied drwxr-xr-x 5 root root 4096 2010-02-24 08:31 samba drwxrwx--T 2 root sambashare 4096 2010-02-24 10:27 usershares -rw-r--r-- 1 stather stather 86 2010-02-24 10:27 vms #VERSION 2 path=/home/stather/VMs comment=fghdfghd usershare_acl=S-1-1-0:F guest_ok=y Greets Thomas ** Affects: samba (Ubuntu) Importance: Undecided Status: New -- File sharing not working in karmic https://bugs.launchpad.net/bugs/526918 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504897] Re: megatec_usb problem (did not claim interface)
Hi I'm sorry this was a stupid problem caused by myself. I started the daemon twice and the second one couldn't connect to the UPS. Greets Thomas -- megatec_usb problem (did not claim interface) https://bugs.launchpad.net/bugs/504897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 504897] [NEW] megatec_usb problem (did not claim interface)
Public bug reported: Binary package hint: nut Ubuntu Version: 9.10 x86 Nut: 2.4.1-3ubuntu2 libusb: 0-1.4 (2:0.1.12-13) usbutils: 0.82-0ubuntu1 I have a problem getting my mustek powermust650 UPS to work with nut (it is officially supported using the megatec_usb driver). When i try to connect to the UPS i always get: r...@controller:/lib/nut# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 ser_send_pace: Device detached? (error -1: error sending control message: Device or resource busy) Successfully reconnected the kernel log (dmesg) shows me many messages like: [ 907.862615] usb 1-1: usbfs: process 1414 (megatec_usb) did not claim interface 0 before use Greetings Thomas ** Affects: nut (Ubuntu) Importance: Undecided Status: New -- megatec_usb problem (did not claim interface) https://bugs.launchpad.net/bugs/504897 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236262] Re: Removing xen-utils-3.1 after an upgrade to xen-utils-3.2 causes problems
I can confirm this bug on Hardy 8.04.3 LTS (machines running xen-3.2 via backports on amd64). I had to reinstall xen-utils-3.1 to get it working again. -- Removing xen-utils-3.1 after an upgrade to xen-utils-3.2 causes problems https://bugs.launchpad.net/bugs/236262 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 328550] Re: qla2xxx takes ~one minute to initialize per device
Hi Is there any reason why this worked out of the box in Hardy LTS (8.04.2) 64 Bit? Heres the dmesg: [4.923483] qla2xxx :03:00.0: Found an ISP2432, irq 16, iobase 0xc203e000 [4.924118] qla2xxx :03:00.0: Configuring PCI space... [4.927146] qla2xxx :03:00.0: Configure NVRAM parameters... [4.963535] qla2xxx :03:00.0: Verifying loaded RISC code... [1.395643] qla2xxx :03:00.0: Allocated (64 KB) for EFT... [1.396014] qla2xxx :03:00.0: Allocated (1413 KB) for firmware dump... [1.411674] qla2xxx :03:00.0: MSI-X: Failed to enable support -- 2/-1 [1.411811] qla2xxx :03:00.0: MSI-X: Falling back-to INTa mode -- -1. [1.411949] scsi1 : qla2xxx [1.412394] qla2xxx :03:00.0: [5.756065] qla2xxx :03:00.0: LOOP UP detected (4 Gbps). Seems that the FW was here loaded from the initramfs or am i wrong? Greets Thomas -- qla2xxx takes ~one minute to initialize per device https://bugs.launchpad.net/bugs/328550 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 402077] [NEW] Preseed ignores existing OS
Public bug reported: I have a problem with preseeding Ubuntu 9.04 (based on a an alternate disk and a custom preseed file). I want to use the free part of the disk for my ubuntu installation as there's already windows installed and i want to use dualboot. My preseed looks like this: d-i partman-auto/init_automatically_partition select biggest_free d-i partman-auto/method string regular d-i partman-auto/choose_recipe select home d-i partman/confirm_write_new_label boolean true d-i partman/choose_partition select finish d-i partman/confirm boolean true d-i grub-installer/with_other_osboolean true But after the installation, the windows partition is gone and grub has been written to the MBR. It seems to me like partman doesn't pay attention to the existing partition (and afterwards grub can't recognize windows because the partition has been wiped). I used the standard Ubuntu 9.04 alternate cd for preseeding. Greetings Thomas ** Affects: partman-auto (Ubuntu) Importance: Undecided Status: New -- Preseed ignores existing OS https://bugs.launchpad.net/bugs/402077 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 398706] [NEW] LVM device or ressource busy error
Public bug reported: Hello I have a problem with my lvm package2. Every time i mount a VG, write data to it and try to unmount it i get "device or ressource busy" until i reboot the server. At this point, no process is using this vg (confirmend via "lsof" and "fuser"). This is really annoying as i have to restart the server each time this error occures (this is a xen virtualisation machine). lvm2 Package version: 2.02.26-1ubuntu9 OS version: Description:Ubuntu 8.04.3 LTS Release:8.04 Type: 64 bit Greets Thomas ** Affects: lvm2 (Ubuntu) Importance: Undecided Status: New -- LVM device or ressource busy error https://bugs.launchpad.net/bugs/398706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 396903] Re: User creating via preseed not working in 9.04 (32 bit)
Here's the syslog from my failed attempt (not that the ossec users with uid 1000 - 1002 are created by a post installation script from the ossec-client package) ** Attachment added: "syslog" http://launchpadlibrarian.net/28796510/syslog -- User creating via preseed not working in 9.04 (32 bit) https://bugs.launchpad.net/bugs/396903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 396903] Re: User creating via preseed not working in 9.04 (32 bit)
Just another hint: The problem exists even if i comment out the whole passwd/ section in my preseed.conf. In this case, the installer asks me for a username and password, but doesn't create the user either. -- User creating via preseed not working in 9.04 (32 bit) https://bugs.launchpad.net/bugs/396903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 396903] Re: User creating via preseed not working in 9.04 (32 bit)
I'll attach the syslog file in a minute, but if the users aren't saved to the passwd/shadow file of the installed system, how is it possible for the standard alternate (and normal desktop) installation routine to add users during the setup? -- User creating via preseed not working in 9.04 (32 bit) https://bugs.launchpad.net/bugs/396903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 396903] [NEW] User creating via preseed not working in 9.04 (32 bit)
Public bug reported: I found a bug while working on a custom install cd for 9.04 via a preseed file. Source: Alternate CD Type: 32 bit Version: 9.04 I wrote my custom preseed file but the installer isn't able to create the user i want to during install: My user section in preseed.cfg looks like: d-i passwd/root-login boolean false d-i passwd/shadow boolean true d-i passwd/make-user boolean true d-i passwd/user-fullname string Test User d-i passwd/username string test d-i passwd/user-password password test d-i passwd/user-password-again password test d-i passwd/user-uid string 1000 d-i user-setup/encrypt-home boolean false Afterwards i checked /var/log/installer/cdebconf/questions.dat Name: passwd/auto-login Template: passwd/auto-login Owners: user-setup-udeb Name: passwd/auto-login-backup Template: passwd/auto-login-backup Owners: user-setup-udeb Name: passwd/make-user Template: passwd/make-user Value: true Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/make-user Name: passwd/root-login Template: passwd/root-login Value: false Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/root-login Name: passwd/shadow Template: passwd/shadow Value: true Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/shadow Name: passwd/user-default-groups Template: passwd/user-default-groups Owners: user-setup-udeb Name: passwd/user-fullname Template: passwd/user-fullname Value: Test User Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/user-fullname Name: passwd/user-uid Template: passwd/user-uid Value: 1000 Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/user-uid Name: passwd/username Template: passwd/username Value: test Owners: d-i, user-setup-udeb Flags: seen Variables: ID = passwd/username Name: passwd/username-bad Template: passwd/username-bad Owners: user-setup-udeb Name: passwd/username-reserved Template: passwd/username-reserved Owners: user-setup-udeb BTW. i don't see anything coming from passwd/user-password or passwd /user-password-again Greets Thomas ** Affects: debian-installer (Ubuntu) Importance: Undecided Status: New -- User creating via preseed not working in 9.04 (32 bit) https://bugs.launchpad.net/bugs/396903 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 297077] Re: libxen3 in hardy-backports breaks Xen 3.2
OK I found a solution as the package in the backports is broken (problem with python). You have to backport xen-3.3 on your own as according to this doc: http://bderzhavets.wordpress.com/2008/11/03/attempt-of-prevu-xen-33-hypervisor-at-ubuntu-hardy-dom0-2624-21-xen/ -- libxen3 in hardy-backports breaks Xen 3.2 https://bugs.launchpad.net/bugs/297077 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 368419] [NEW] apt-mirror i18n files
Public bug reported: I have a problem with apt-mirror, it doesn't mirror the i18n files on the remote target (i.e. ftp://ftp.ubuntu.com/ubuntu/dists/intrepid/main/i18n/). Is there a solution available? Description:Ubuntu 8.04.2 Release:8.04 Package: ii apt-mirror0.4.5-1ubuntu1.1~8.04prevu1 APT sources mirroring tool (i backported apt-mirror from intrepid because of the .bz2 files bug in 0.4.5) Greets Thomas ** Affects: apt-mirror (Ubuntu) Importance: Undecided Status: New -- apt-mirror i18n files https://bugs.launchpad.net/bugs/368419 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 297077] Re: libxen3 in hardy-backports breaks Xen 3.2
Hi What is the current status on this, is it now safe to update Xen 3.2 to 3.3 vial the backports repository or will this break my system (i ask because this is a productive machine)? Greets Thomas -- libxen3 in hardy-backports breaks Xen 3.2 https://bugs.launchpad.net/bugs/297077 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 74320] Re: ocfs2 plugin fails to load
I can confirm this Bug with Ubuntu Server 8.04.2. But for me it only occures when i installed the "ocfs2-tools" package via apt. Without the package, the GUI is started and the plugin shown. -- ocfs2 plugin fails to load https://bugs.launchpad.net/bugs/74320 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319260] [NEW] cman fails to join cluster after reboot
Public bug reported: Binary package hint: cman I have a problem regarding CMAN and CLVM on my Ubuntu 8.04 XEN-Server. When i boot up the machine, the boot process hangs at the message, saying "joining cluster". After about 2 minutes, the system continues, but then i have to restart /etc/init.d/cman and /etc/init.d/clvm in order to display my LVs. The version of cman is 2.20080227 I got the following from syslog: Jan 20 15:58:46 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:46 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:46 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:46 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:47 samhain kernel: [ 119.799871] Bridge firewalling registered Jan 20 15:58:47 samhain kernel: [ 119.800662] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Jan 20 15:58:47 samhain kernel: [ 118.085019] ADDRCONF(NETDEV_UP): peth0: link is not ready Jan 20 15:58:47 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:47 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:47 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:47 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:48 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:48 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:48 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:48 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:49 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:49 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:49 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:49 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:50 samhain kernel: [ 122.632978] e1000: peth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Jan 20 15:58:50 samhain kernel: [ 122.646120] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready Jan 20 15:58:50 samhain kernel: [ 121.116333] device peth0 entered promiscuous mode Jan 20 15:58:50 samhain kernel: [ 121.116344] audit(1232463530.503:2): dev=peth0 prom=256 old_prom=0 auid=4294967295 Jan 20 15:58:50 samhain kernel: [ 121.125962] eth0: port 1(peth0) entering learning state Jan 20 15:58:50 samhain kernel: [ 121.128175] eth0: topology change detected, propagating Jan 20 15:58:50 samhain kernel: [ 121.128188] eth0: port 1(peth0) entering forwarding state Jan 20 15:58:50 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:50 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:50 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:50 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:50 samhain xenstored: Checking store ... Jan 20 15:58:50 samhain xenstored: Checking store complete. Jan 20 15:58:51 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:51 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:51 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:51 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:52 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:52 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:52 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:52 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: blktapctrl: v1.0.0 Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: Found driver: [raw image (aio)] Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: Found driver: [raw image (sync)] Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: Found driver: [vmware image (vmdk)] Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: Found driver: [ramdisk image (ram)] Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: Found driver: [qcow disk (qcow)] Jan 20 15:58:52 samhain BLKTAPCTRL[5877]: /dev/xen/blktap0 device already exists Jan 20 15:58:52 samhain kernel: [ 125.432261] Setting mem allocation to 32970252 kiB Jan 20 15:58:53 samhain /usr/sbin/cron[5980]: (CRON) INFO (pidfile fd = 3) Jan 20 15:58:53 samhain /usr/sbin/cron[5981]: (CRON) STARTUP (fork ok) Jan 20 15:58:53 samhain /usr/sbin/cron[5981]: (CRON) INFO (Running @reboot jobs) Jan 20 15:58:53 samhain ccsd[5514]: Cluster is not quorate. Refusing connection. Jan 20 15:58:53 samhain ccsd[5514]: Error while processing connect: Connection refused Jan 20 15:58:53 samh
[Bug 319238] [NEW] xen-tools xen-create-image crashes
Public bug reported: Binary package hint: xen-tools Hello I've an issue with my newly created xen-cluster: OS: Ubuntu 8.04 LTS XEN: 3.2 xen-tools: 3.8-4ubuntu4 It happens that when i create DomUs with xen-tools, xen-tools randomly crashes leaving an mounted LV (i use CLVM) under /tmp/ The Script itself just hangs and i have to press CTRL+C to interrupt and to unmount and delete the LV. To me it looks like there is a problem with the xen-create-image script because this appens before the hook scripts are run. Does anybody of you have an idea what casues this issue? Greetings Thomas ** Affects: xen-tools (Ubuntu) Importance: Undecided Status: New -- xen-tools xen-create-image crashes https://bugs.launchpad.net/bugs/319238 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
