[Bug 106903] Re: error message when gnome-alsamixer is launching
I have the same issue with my 10.04.3 install i've been running forever. The errors I get involve it looking for config settings being looked for within this location: Bad key or directory name: /apps/gnome-alsamixer/display_mixers/: Key/directory may not end with a slash '/' Bad key or directory name: /apps/gnome-alsamixer/display_names/: Key/directory may not end with a slash '/' -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/106903 Title: error message when gnome-alsamixer is launching To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-alsamixer/+bug/106903/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 367675] Re: not automount by fstab in Jaunty
steve, yes it does exist. i am running karmic upgraded all the way back from hardy heron and my nfs mounts not longer auto mount. here are my fstab entries 192.168.0.5:/var/lib/mythtv /var/lib/mythtv nfs rsize=8192,wsize=8192,timeo=14,intr 192.168.0.5:/media/500gb /media/500gb nfs rsize=8192,wsize=8192,timeo=14,intr 192.168.0.5:/media/500gb1 /media/500gb1 nfs rsize=8192,wsize=8192,timeo=14,intr although from reading above i noticed that my interfaces file may be jacked up. this is what it looks like auto lo iface lo inet loopback # The primary network interface iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 gateway 192.168.0.1 dns-nameservers 208.67.222.222 208.67.220.220 iface bnep0 inet dhcp auto eth0 i changed it to look like this auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 gateway 192.168.0.1 dns-nameservers 208.67.222.222 208.67.220.220 #iface bnep0 inet dhcp #auto eth0 so the next reboot i hope they automount. either way i'll be back to let everyone know -- not automount by fstab in Jaunty https://bugs.launchpad.net/bugs/367675 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 221512] Re: autofs cannot mount nfs shares with the grpid
i don't believe so. i am now experiencing this. when I boot my karmic install, my NFS shares no longer auto mount. I have to issue sudo mount -a and then they mount just fine. Can anyone help please? I have read something about the networking being started after the mount all command is given, how do i fix this? what logs should I post? -- autofs cannot mount nfs shares with the grpid https://bugs.launchpad.net/bugs/221512 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to autofs in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 221512] Re: autofs cannot mount nfs shares with the grpid
i don't believe so. i am now experiencing this. when I boot my karmic install, my NFS shares no longer auto mount. I have to issue sudo mount -a and then they mount just fine. Can anyone help please? I have read something about the networking being started after the mount all command is given, how do i fix this? what logs should I post? -- autofs cannot mount nfs shares with the grpid https://bugs.launchpad.net/bugs/221512 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 478034] [NEW] package linux-image-2.6.28-16-generic 2.6.28-16.56 failed to install/upgrade: subprocess post-installation script returned error exit status 2
Public bug reported: Binary package hint: linux-image-2.6.28-16-generic i am trying to do an upgrade of the kernel just using sudo apt-get update and then sudo apt-get upgrade and it fails trying to install the new kernel. NOt sure why, any help would be appreciated. i had the same issue with the -15-generic kernel and I posted about it here: http://ubuntuforums.org/showthread.php?t=1277389 i followed all the instructions for what log files I should attach but it only allows one attachment so I had to archive them together and attach that. hope that's ok. ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 9.04 ErrorMessage: subprocess post-installation script returned error exit status 2 HibernationDevice: RESUME=/dev/sdb2 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: To Be Filled By O.E.M. 775Dual-VSTA NonfreeKernelModules: nvidia Package: linux-image-2.6.28-16-generic 2.6.28-16.56 ProcCmdLine: root=UUID=a911a520-73d8-4a14-a578-e5f7aea065ce ro quiet splash ProcVersionSignature: Ubuntu 2.6.28-15.52-generic SourcePackage: linux Title: package linux-image-2.6.28-16-generic 2.6.28-16.56 failed to install/upgrade: subprocess post-installation script returned error exit status 2 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 -- package linux-image-2.6.28-16-generic 2.6.28-16.56 failed to install/upgrade: subprocess post-installation script returned error exit status 2 https://bugs.launchpad.net/bugs/478034 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 478034] Re: package linux-image-2.6.28-16-generic 2.6.28-16.56 failed to install/upgrade: subprocess post-installation script returned error exit status 2
** Attachment added: bug_attachments.zip http://launchpadlibrarian.net/35346834/bug_attachments.zip ** Attachment added: BootDmesg.txt http://launchpadlibrarian.net/35346835/BootDmesg.txt ** Attachment added: CurrentDmesg.txt http://launchpadlibrarian.net/35346836/CurrentDmesg.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/35346837/Dependencies.txt ** Attachment added: DpkgTerminalLog.txt http://launchpadlibrarian.net/35346838/DpkgTerminalLog.txt ** Attachment added: HalComputerInfo.txt http://launchpadlibrarian.net/35346839/HalComputerInfo.txt ** Attachment added: Lspci.txt http://launchpadlibrarian.net/35346840/Lspci.txt ** Attachment added: ProcCpuinfo.txt http://launchpadlibrarian.net/35346841/ProcCpuinfo.txt ** Attachment added: ProcInterrupts.txt http://launchpadlibrarian.net/35346842/ProcInterrupts.txt ** Attachment added: ProcModules.txt http://launchpadlibrarian.net/35346843/ProcModules.txt -- package linux-image-2.6.28-16-generic 2.6.28-16.56 failed to install/upgrade: subprocess post-installation script returned error exit status 2 https://bugs.launchpad.net/bugs/478034 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 77702] Re: Memory leak in xfce4-menu-plugin
i'd like to add to this also. i am running mythbuntu jaunty jackalope and it uses xfce4-panel. version info here: Package: xfce4-panel State: installed Automatically installed: yes Version: 4.6.0-1ubuntu1 Priority: optional Section: universe/x11 Maintainer: Xubuntu Developers xubuntu-de...@lists.ubuntu.com Uncompressed Size: 2019k Depends: libatk1.0-0 (= 1.20.0), libc6 (= 2.4), libcairo2 (= 1.2.4), libexo-0.3-0 (= 0.3.100), libfontconfig1 (= 2.4.0), libfreetype6 (= 2.3.5), libglib2.0-0 (= 2.18.0), libgtk2.0-0 (= 2.15.0), libice6 (= 1:1.0.0), libpango1.0-0 (= 1.22.0), libsm6, libstartup-notification0 (= 0.8-1), libwnck22 (= 2.22.0), libx11-6, libxfce4util4 (= 4.6.0), libxfcegui4-4 (= 4.6.0), zlib1g (= 1:1.1.4), exo-utils Conflicts: xubuntu-default-settings ( 0.48) Replaces: xubuntu-default-settings ( 0.48) Description: The Xfce4 desktop environment panel This is the panel provided by the Xfce4 desktop project. If you want a multi-functional panel that can even handle plugins and the like, xfce4-panel might be worth a try. Homepage: http://www.xfce.org/ when I ran top, it showed this: PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND 7560 daniel20 0 21808 2684 1556 S 0.3 1.1 2:14.58 xfce4-panel please let me know how can I solve this issue as my system only has 256mb ram and it's my main file server and mythtv server. any help would be much appreciated. -- Memory leak in xfce4-menu-plugin https://bugs.launchpad.net/bugs/77702 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 340426] Re: bluetooth host down error
i can confirm this bug. I am using Hardy Heron and I am trying to pair my iPhone 2G runnning OS 3.0. I have a trendnet usb bluetooth adapter. I am using a PPA repo from elliot murphy for the updated bluez-utilz that has the pand enabled. lsusb Bus 004 Device 002: ID 1310:0001 Roper Class 1 Bluetooth Dongle dmesg | grep Bluetooth [365517.057519] Bluetooth: Core ver 2.11 [365517.057624] Bluetooth: HCI device and connection manager initialized [365517.057628] Bluetooth: HCI socket layer initialized [365517.089034] Bluetooth: HCI USB driver ver 2.9 [366882.609965] Bluetooth: L2CAP ver 2.9 [366882.609969] Bluetooth: L2CAP socket layer initialized [366882.632019] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [366882.632023] Bluetooth: BNEP filters: protocol multicast [366882.639781] Bluetooth: RFCOMM socket layer initialized [366882.639792] Bluetooth: RFCOMM TTY layer initialized [366882.639794] Bluetooth: RFCOMM ver 1.8 What is wrong? -- bluetooth host down error https://bugs.launchpad.net/bugs/340426 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 146284] Re: [Gutsy Beta] 82865G Integrated Graphics Controller Not Correctly Identiified during setup
this still does not work. I just did a fresh install which has a Intel Corporation 82865G Integrated Graphics built in graphics card. Xorg would only run in 800x600 or whatever. I don't even know what resolution is my optimal hjighest res? I'll have to google around and enter it in xorg.conf myself. I edited xorg to make it use either the i810 or the intel driver but I wish there was a tool that would allow me to chose the best res. -- [Gutsy Beta] 82865G Integrated Graphics Controller Not Correctly Identiified during setup https://bugs.launchpad.net/bugs/146284 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 207471] Re: Tovid package does not install all dependencies
i can confirm this bug. I installed tovid. Package: tovidgui State: installed Automatically installed: yes Version: 0.31-0ubuntu1 Priority: optional Section: multiverse/graphics Maintainer: Ubuntu MOTU Developers ubuntu-m...@lists.ubuntu.com Uncompressed Size: 61.4k Depends: python (= 2.4), python-wxgtk2.6, tovid (= 0.31-0ubuntu1) and when I tried to run it the first time I received an error that mencoder wasn't installed. Also, I am getting an error after it's done encoding saying that makexml can't find the *.mpg file. I look at the directory that i chose as the new /tmp location and there is only a file called *.tovid_encoded.mpg. Not sure what this means. Do I need to enable the proposed repo? -- Tovid package does not install all dependencies https://bugs.launchpad.net/bugs/207471 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 207471] Re: Tovid package does not install all dependencies
another note. when running tovid it also states missing composite and convert but it does for whatever reason does seem like it continues to work? -- Tovid package does not install all dependencies https://bugs.launchpad.net/bugs/207471 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 388566] Re: totally unwatchable stuttering video and no audio while trying to play .mpg file.
01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Unknown device 2144 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at f600 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c000 (32-bit, prefetchable) [size=256M] Region 2: Memory at f500 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at f7ce [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=none -- totally unwatchable stuttering video and no audio while trying to play .mpg file. https://bugs.launchpad.net/bugs/388566 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 388566] [NEW] totally unwatchable stuttering video and no audio while trying to play .mpg file.
Public bug reported: Binary package hint: totem totem source package: 2.22.1-0ubuntu3 per this website: https://launchpad.net/ubuntu/+source/totem Description:Ubuntu 8.04.2 Release:8.04 totem: Installed: 2.22.1-0ubuntu3 Candidate: 2.22.1-0ubuntu3 Version table: *** 2.22.1-0ubuntu3 0 500 http://us.archive.ubuntu.com hardy-updates/main Packages 100 /var/lib/dpkg/status 2.22.1-0ubuntu2 0 500 http://us.archive.ubuntu.com hardy/main Packages i expected totem to be able to play the .mpg file. instead it stutters through the file and there is no sound. ProblemType: Bug Architecture: i386 Date: Wed Jun 17 12:19:49 2009 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/totem-gstreamer NonfreeKernelModules: nvidia Package: totem-gstreamer 2.22.1-0ubuntu3 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem Uname: Linux 2.6.24-24-generic i686 ** Affects: totem (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- totally unwatchable stuttering video and no audio while trying to play .mpg file. https://bugs.launchpad.net/bugs/388566 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 388566] Re: totally unwatchable stuttering video and no audio while trying to play .mpg file.
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/28033723/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/28033724/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/28033725/ProcStatus.txt -- totally unwatchable stuttering video and no audio while trying to play .mpg file. https://bugs.launchpad.net/bugs/388566 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194760] Re: EDID fail
I am still using Feisty Fawn so I don't have any issues running sudo dpkg-reconfigure xserver-xorg or using nvidia-settings to setup my dual head setup running 2 seperate screens (it's a Nvidia 6200 with agp and dvi). Now that I see this is happening, I am scared to upgrade. Please fix this issue. I also use a kvm, my ubuntu box vga out goes into the kvm and the dvi out goes to a lcd tv as my seperate screen. My windows box agp out goes into the other agp on the kvm. I own a 17 Princeton Synergy 714 and the other 17 LCD TV per xorg.conf is Philips PHL 17PF8946. cat /proc/version_signature Ubuntu 2.6.20-16.35-generic cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86 Kernel Module 100.14.23 Thu Oct 4 10:16:34 PDT 2007 GCC version: gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4) cat /proc/driver/nvidia/registry VideoMemoryTypeOverride: 1 EnableVia4x: 0 EnableALiAGP: 0 NvAGP: 3 ReqAGPRate: 15 EnableAGPSBA: 0 EnableAGPFW: 0 SoftEDIDs: 1 Mobile: 4294967295 ResmanDebugLevel: 4294967295 FlatPanelMode: 0 DevicesConnected: 0 RmLogonRC: 1 VbiosFromROM: 0 ModifyDeviceFiles: 1 DeviceFileUID: 0 DeviceFileGID: 0 DeviceFileMode: 438 RemapLimit: 0 UseCPA: 4294967295 DetectPrimaryVga: 1 EnableBrightnessControl: 0 PanelPWMFrequency: 1018 PanelBrightnessLimits: 65280 UseVBios: 1 RMEdgeIntrCheck: 1 cat /proc/driver/nvidia/cards/0 Model: GeForce 6200 IRQ: 23 Video BIOS: 05.44.a2.07.00 Card Type: AGP DMA Size:32 bits DMA Mask:0x Bus Location:01.00.0 cat /proc/devices | grep nvidia 195 nvidia 000a-000b : Video RAM area 000c-000c7fff : Video ROM read-edid Version: 1.4.1-2.1 sudo get-edid | parse-edid parse-edid: parse-edid version 1.4.1 get-edid: get-edid version 1.4.1 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0x0 NVIDIA VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination does not support DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function supported Call failed The EDID data should not be trusted as the VBE call failed Error: output block unchanged parse-edid: IO error reading EDID -- EDID fail https://bugs.launchpad.net/bugs/194760 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 98726] Re: ACPI-0517: *** Error: Method parse/execution failed [\_PR_ .CPU1._PDC] (Node dfffe660), AE_BAD_HEADER
I have this issue with Feisty Fawn. Kernel: 2.6.20-16-generic My outputs are below: lspci 00:00.0 Host bridge: VIA Technologies, Inc. PT894 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller 00:09.0 FireWire (IEEE 1394): Texas Instruments FireWire Controller (rev 01) 00:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) 00:10.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev a0) 00:10.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev a0) 00:10.2 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev a0) 00:10.3 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev a0) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge 01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1) 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10) cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping: 2 cpu MHz : 1710.956 cache size : 2048 KB physical id : 0 siblings: 2 core id : 0 cpu cores : 2 fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips: 3423.99 clflush size: 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping: 2 cpu MHz : 1710.956 cache size : 2048 KB physical id : 0 siblings: 2 core id : 1 cpu cores : 2 fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips: 3421.83 clflush size: 64 dmesg | grep ACPI [0.00] BIOS-e820: 7ffb - 7ffc (ACPI data) [0.00] BIOS-e820: 7ffc - 7fff (ACPI NVS) [0.00] ACPI: RSDP (v000 ACPIAM) @ 0x000f7df0 [0.00] ACPI: RSDT (v001 A M I OEMRSDT 0x12000611 MSFT 0x0097) @ 0x7ffb [0.00] ACPI: FADT (v002 A M I OEMFACP 0x12000611 MSFT 0x0097) @ 0x7ffb0200 [0.00] ACPI: MADT (v001 A M I OEMAPIC 0x12000611 MSFT 0x0097) @ 0x7ffb0390 [0.00] ACPI: MCFG (v001 A M I OEMMCFG 0x12000611 MSFT 0x0097) @ 0x7ffb0410 [0.00] ACPI: OEMB (v001 A M I AMI_OEM 0x12000611 MSFT 0x0097) @ 0x7ffc0040 [0.00] ACPI: DSDT (v001 75D8U 75D8U000 0x INTL 0x02002026) @ 0x [0.00] ACPI: PM-Timer IO Port: 0x808 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [0.00] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: IOAPIC (id[0x03] address[0xfecc] gsi_base[24]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by
[Bug 98726] Re: ACPI-0517: *** Error: Method parse/execution failed [\_PR_ .CPU1._PDC] (Node dfffe660), AE_BAD_HEADER
not that I am aware of but then again I don't know exactly what ACPI does. I use mythtv and I get this error all the time in my kern.log. Mar 22 21:30:20 UBUNTU kernel: [747271.849283] ivtv0: All encoder MPEG stream buffers are full. Dropping data. Mar 22 21:30:21 UBUNTU kernel: [747271.849288] ivtv0: Cause: the application is not reading fast enough. I have even changed the mpeg buffers from the default to 16MB but I still get these errors. I haven't tried a new PCI slot for the PVR-350. My recordings are ok for the most part but it does drop some frames once in awhile. I have attached the file you requested after performing that command. ** Attachment added: biosdecode.txt http://launchpadlibrarian.net/12895236/biosdecode.txt -- ACPI-0517: *** Error: Method parse/execution failed [\_PR_ .CPU1._PDC] (Node dfffe660), AE_BAD_HEADER https://bugs.launchpad.net/bugs/98726 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 187483] [NEW] ivtv-utils modules.txt has incorrect parameters referenced
Public bug reported: Binary package hint: ivtv-utils I was trying to apply some parameters for my PVR-350 so I could rid my MythTV recordings of pauses and dropped frames and according to modules.txt located in /usr/share/doc/ivtv-utils/ (as well as the MythTV PVR-350 Wiki) I was to be using the following parameters for increasing the buffers. yuv_buffers 2 32 mpg_buffers 4 16 vbi_buffers 2 16 pcm_buffers 2 16 dec_mpg_buffers 1 1 dec_yuv_buffers 1 1 dec_vbi_buffers 1 1 dec_osd_buffers 1 2 I was to add this line to my /etc/modprobe.conf options ivtv yuv_buffers=32 mpg_buffers=16 vbi_buffers=16 pcm_buffers=16 dec_osd_buffers=2 but when using those parameters ivtv wasn't even loading. I was getting the following error in dmesg: ivtv: Unknown parameter `yuv_buffers' The following is what modinfo ivtv returns: parm: enc_mpg_buffers:Encoder MPG Buffers (in MB) Default: 4 (int) parm: enc_yuv_buffers:Encoder YUV Buffers (in MB) Default: 2 (int) parm: enc_vbi_buffers:Encoder VBI Buffers (in MB) Default: 1 (int) parm: enc_pcm_buffers:Encoder PCM buffers (in MB) Default: 1 (int) parm: dec_mpg_buffers:Decoder MPG buffers (in MB) Default: 1 (int) parm: dec_yuv_buffers:Decoder YUV buffers (in MB) Default: 1 (int) parm: dec_vbi_buffers:Decoder VBI buffers (in MB) Default: 1 (int) it really needed to be enc_yuv_buffers for encoder buffers and dec_yuv_buffers for decoder buffers. I think the modules.txt file should be updated to reflect what parameters are correct for the ivtv module. ** Affects: ivtv (Ubuntu) Importance: Undecided Status: New -- ivtv-utils modules.txt has incorrect parameters referenced https://bugs.launchpad.net/bugs/187483 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135279] Re: F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5
Huh? I provided the requested info awhile ago, did this get lost somehow? Shouldn't this be a bug that should be worked on for the release of Gutsy? Any more info needed I would be happy to provide as this is a major bug IMO. -- F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5 https://bugs.launchpad.net/bugs/135279 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135279] F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5
Public bug reported: I just tried to use Gutsy Gibbon Alpha 5 (Tribe 5) and it still does not work with the Belkin F5D7050, not sure of the version it is but it does have a 2571wf chip in it. I am including a pastebin link which has the lsusb output, dmesg error's, the kernel found with uname -r, and the lsmod | grep rt command. May I ask why this is still not working as it hasn't ever, even back to Dapper? http://pastebin.com/m4b8b36e7 ** Affects: rt2x00 (Ubuntu) Importance: Undecided Status: New -- F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5 https://bugs.launchpad.net/bugs/135279 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 130078] Re: Gutsy Gibbon 2.6.22-9-generic Kernel Panic when inserting belkins F5D7050 USB wifi card/rt73 driver
This may or may not be related to this bug I just filed: https://bugs.launchpad.net/ubuntu/+source/rt2x00/+bug/135279 -- Gutsy Gibbon 2.6.22-9-generic Kernel Panic when inserting belkins F5D7050 USB wifi card/rt73 driver https://bugs.launchpad.net/bugs/130078 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 135279] Re: F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5
here is the syslog from trying to enable it as well as the lsusb -v you requested. I have not blacklisted anything and it appears from dmesg that both the rt73usb and the rt2x00usb are trying to use it. syslog http://pastebin.com/m12d284fe lsusb -v http://pastebin.com/m7e6d18 Also, it appears as though user Austin_KW has some knowledge regarding this and maybe can help here?? See ubuntu forums post here: http://ubuntuforums.org/showthread.php?t=400236page=65 -- F5D7050 (2571wf chip) does NOT work in Gutsy Gibbon Tribe 5 https://bugs.launchpad.net/bugs/135279 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134801] Re: Mythplugins 0.20.2 SRU
works great! GREAT JOB MARIO!!! mythweb also working! -- Mythplugins 0.20.2 SRU https://bugs.launchpad.net/bugs/134801 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 122941] Re: compiz.real crashed with SIGSEGV in exit()
I am having this occur when I merely start up Gutsy Tribe 3. I installed it from the latest cd available at ubuntu website via torrent. Then last night there were like more 60 some updates. I don't know if that did something to screw up what I mention below. The compiz thing has been NOT starting right from the get go. ALso what was very weird about this is that none of my gnome-panels appeared at all. I could do an alt-f2, then enter sudo killall gnome- panel and then they finally appeared. Here is dmesg and syslog if that helps. ** Attachment added: compiz_crash_log http://launchpadlibrarian.net/8648803/_usr_bin_compiz.real.1000.crash -- compiz.real crashed with SIGSEGV in exit() https://bugs.launchpad.net/bugs/122941 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61235] Re: USB mass storage stops working after a while
I just had the same problem and haven't ever had this problem! It occured when attaching a USB to SD card adapter (with a 1gb CD card made by Lexar) and also a Internal HDD that's connected to a IDE-USB adapter (a Seagate 500gb ST3500830A). This is what the error is in the syslog: http://pastebin.com/m7a29e7e3 I know there is other stuff in there but it was easier to just copy and paste it into pastebin plus I am unaware what's relevant and what's not. Now when I plug in the USB to SD card adapter it doesn't even auto mount. NOw what? Do I need to restart to get it to automount.If I try to manually mount it it works fine BUT with only 1 thing attached at a time. All I was trying to do was copy over 200 some gig worth of mythtv recordings and then I wanted to plug in the usb-sc card adapter to burn an .iso to a cd from that cd card. Hope this helps figure this problem out. -- USB mass storage stops working after a while https://bugs.launchpad.net/bugs/61235 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118862] Re: update-manager -c -d DOESN'T work for going to Gutsy
May I please ask why not one person has responded to this which will have some impact regarding it's fix or similar??? Why is this still in unconfirmed when other users have posted that they have the same problem? How does this bug thing work as this is the first I posted to help out with the Gutsy testing. Can anyone from the bug team or a developer please comment on how this works and or why there hasn't been at least a comment stating that this is being reviewed? Thank you. -- update-manager -c -d DOESN'T work for going to Gutsy https://bugs.launchpad.net/bugs/118862 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118862] update-manager -c -d DOESN'T work for going to Gutsy
Public bug reported: Binary package hint: update-manager Can reproduce by installing Fresh Install of Feisty Server Edition, then installing xubuntu-desktop, then trying to upgrade to Gutsy using this command: sudo update-manager -c -d and it will fail with some kind of error which I have pasted below. sudo update-manager -c -d warning: could not initiate dbus extracting '/tmp/tmp1Pv9L5/gutsy.tar.gz' authenticate '/tmp/tmp1Pv9L5/gutsy.tar.gz' against '/tmp/tmp1Pv9L5/gutsy.tar.gz.gpg' could not send the dbus Inhibit signal: global name 'dbus' is not defined Traceback (most recent call last): File /usr/lib/python2.5/site-packages/UpdateManager/UpdateManager.py, line 914, in on_button_dist_upgrade_clicked fetcher.run() File /usr/lib/python2.5/site-packages/UpdateManager/Core/DistUpgradeFetcherCore.py, line 178, in run self.runDistUpgrader() File /usr/lib/python2.5/site-packages/UpdateManager/DistUpgradeFetcher.py, line 53, in runDistUpgrader if os.getuid() != 0: NameError: global name 'os' is not defined ** Affects: update-manager (Ubuntu) Importance: Undecided Status: Unconfirmed -- update-manager -c -d DOESN'T work for going to Gutsy https://bugs.launchpad.net/bugs/118862 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 116996] Re: SATA disk is in PATA mode with kernel 2.6.20-16-generic (piix claiming SATA controller on ICH4/ICH5 boards)
Don't know if this will help this bug or not but I am a ubuntuforums member and have been trying to keep spirits high and try to console those who feel that Ubuntu has really screwed up here, sad to say that I don't have much of an arguement when something as large as this occurs. Anway, back to the subject at hand, all my SATA drives are still being handled by SCSI emulation (i think that's what it means when you see SATA devices show up with the /dev/sdXY device id) Here is my output from lspci -vvv for my IDE controllers. 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASRock Incorporation Unknown device 0591 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 Interrupt: pin B routed to IRQ 21 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (NOTE: I am not sure why the second IDE controller doesn't have a line for the Interupt but it doesn't) This is a ASRock 775dual-VSTA motherboard. And this is what shows for libata under lsmod: libata125720 2 sata_via,ata_generic So this chipset does NOT have this problem, I hope this info is helpful. -- SATA disk is in PATA mode with kernel 2.6.20-16-generic (piix claiming SATA controller on ICH4/ICH5 boards) https://bugs.launchpad.net/bugs/116996 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118221] Re: kernel 2.6.20-16 nvidia-glx and nvidia-glx-new won't load
you'll neeed to show the output of dmesg so we can see what it says about the NVIDIA module. Also, did you disable the nvidia restricted module within /etc/default/linux-restricted-modules-common file? put nv within the quotes and it will load the nvidia-glx-new driver, that's how I got my GeForce 6200 128mb to work anyway. And yes, I am using the 16 kernel as well as compiz. Also, you are aware that you may need to uninstall it and reinstall it after the kernel update correct? First make a copy of your xorg.conf file and then I used these commands: sudo apt-get --purge remove nvidia-glx* nvidia-kernel-* sudo aptitude install nvidia-glx-new sudo cp /etc/X11/xorg.conf_backup /etc/X11/xorg.conf (NOTE: this is just putting a copy of the xorg.conf file that you made prior to uninstalling nvidia back in it's place, use the name of whatever you chose when you backed it up) ctrl-alt-backspace then you should now be using the new driver. If you can't get into X-server at all, then after X fails, just login to the command line and perform the steps above and hten do this sudo /etc/init.d/gdm stop sudo /etc/init.d/gdm start If that doesn't work, well again need to see the dmesg output. -- kernel 2.6.20-16 nvidia-glx and nvidia-glx-new won't load https://bugs.launchpad.net/bugs/118221 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
