[Bug 413921] Re: USB-Hard-Disc doesn't work in 9.10

2009-09-12 Thread Philip Muskovac
*** This bug is a duplicate of bug 387161 ***
https://bugs.launchpad.net/bugs/387161

Thank you for taking the time to report this bug and helping to make
Ubuntu better. This particular bug has already been reported and is a
duplicate of bug 387161, so it is being marked as such. Please look at
the other bug report to see if there is any missing information that you
can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** This bug has been marked a duplicate of bug 387161
   JMicron drives cause USB resets on ATA smart probing

-- 
USB-Hard-Disc doesn't work in 9.10
https://bugs.launchpad.net/bugs/413921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 413921] Re: USB-Hard-Disc doesn't work in 9.10

2009-08-19 Thread gallico
Same here:

[ 3816.796073] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 3816.930057] usb 2-2: configuration #1 chosen from 1 choice
[ 3817.014332] Initializing USB Mass Storage driver...
[ 3817.014731] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3817.015089] usb-storage: device found at 3
[ 3817.015095] usbcore: registered new interface driver usb-storage
[ 3817.015102] usb-storage: waiting for device to settle before scanning
[ 3817.015463] USB Mass Storage support registered.
[ 3822.013559] usb-storage: device scan complete
[ 3822.014123] scsi 5:0:0:0: Direct-Access SAMSUNG  HM251JJ   
PQ: 0 ANSI: 2 CCS
[ 3822.020553] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 
GiB)
[ 3822.021775] sd 5:0:0:0: [sdb] Write Protect is off
[ 3822.021779] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 3822.021782] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.022274] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3822.024113] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.024121]  sdb: sdb1
[ 3822.117050] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3822.117062] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 3822.488104] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3822.612203] usb 2-2: device descriptor read/64, error -71
[ 3822.844080] usb 2-2: device descriptor read/64, error -71
[ 3823.060104] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3823.180105] usb 2-2: device descriptor read/64, error -71
[ 3823.408090] usb 2-2: device descriptor read/64, error -71
[ 3823.624467] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3824.040041] usb 2-2: device not accepting address 3, error -71
[ 3824.152160] usb 2-2: reset high speed USB device using ehci_hcd and address 3
[ 3824.568167] usb 2-2: device not accepting address 3, error -71
[ 3824.568738] usb 2-2: USB disconnect, address 3
[ 3824.684102] usb 2-2: new high speed USB device using ehci_hcd and address 4
[ 3824.808084] usb 2-2: device descriptor read/64, error -71
[ 3825.036092] usb 2-2: device descriptor read/64, error -71
[ 3825.252058] usb 2-2: new high speed USB device using ehci_hcd and address 5
[ 3825.376081] usb 2-2: device descriptor read/64, error -71
[ 3825.605997] usb 2-2: device descriptor read/64, error -71
[ 3825.824118] usb 2-2: new high speed USB device using ehci_hcd and address 6
[ 3826.240023] usb 2-2: device not accepting address 6, error -71
[ 3826.352056] usb 2-2: new high speed USB device using ehci_hcd and address 7
[ 3826.764091] usb 2-2: device not accepting address 7, error -71
[ 3826.764135] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 3827.036080] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3827.156168] usb 5-2: device descriptor read/64, error -71
[ 3827.380086] usb 5-2: device descriptor read/64, error -71
[ 3827.596177] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 3827.716082] usb 5-2: device descriptor read/64, error -71
[ 3827.940106] usb 5-2: device descriptor read/64, error -71
[ 3828.156099] usb 5-2: new full speed USB device using uhci_hcd and address 4
[ 3828.572048] usb 5-2: device not accepting address 4, error -71
[ 3828.684114] usb 5-2: new full speed USB device using uhci_hcd and address 5
[ 3829.100078] usb 5-2: device not accepting address 5, error -71
[ 3829.100118] hub 5-0:1.0: unable to enumerate USB device on port 2

/etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu karmic (development branch)"

uname -a
Linux ulrb-linux 2.6.31-6-generic #25-Ubuntu SMP Fri Aug 14 16:28:28 UTC 2009 
x86_64 GNU/Linux

-- 
USB-Hard-Disc doesn't work in 9.10
https://bugs.launchpad.net/bugs/413921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 413921] Re: USB-Hard-Disc doesn't work in 9.10

2009-08-15 Thread dan-linux
I have the same problem with karmic but not with jaunty.

dmesg:
[  529.804084] usb 1-1: new high speed USB device using ehci_hcd and address 12 

[  529.954368] usb 1-1: configuration #1 chosen from 1 choice   

[  529.986629] scsi5 : SCSI emulation for USB Mass Storage devices
[  529.987076] usb-storage: device found at 12
[  529.987089] usb-storage: waiting for device to settle before scanning
[  534.984438] usb-storage: device scan complete
[  535.055955] scsi 5:0:0:0: Direct-Access SAMSUNG  HM320JI   
PQ: 0 ANSI: 2 CCS
[  535.059937] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  535.060962] sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 
GB/298 GiB)
[  535.063515] sd 5:0:0:0: [sdb] Write Protect is off
[  535.063525] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00
[  535.063531] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  535.066475] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[  535.066491]  sdb: sdb1
[  535.123500] sd 5:0:0:0: [sdb] Attached SCSI disk
[  535.453028] usb 1-1: reset high speed USB device using ehci_hcd and address 
12
[  535.600059] usb 1-1: device descriptor read/64, error -71
[  535.864069] usb 1-1: device descriptor read/64, error -71
[  536.081057] usb 1-1: reset high speed USB device using ehci_hcd and address 
12
[  536.241055] usb 1-1: device descriptor read/64, error -71
[  536.493045] usb 1-1: device descriptor read/64, error -71
[  536.708045] usb 1-1: reset high speed USB device using ehci_hcd and address 
12
[  537.140048] usb 1-1: device not accepting address 12, error -71
[  537.253070] usb 1-1: reset high speed USB device using ehci_hcd and address 
12
[  537.688053] usb 1-1: device not accepting address 12, error -71
[  537.688663] usb 1-1: USB disconnect, address 12
[  537.804082] usb 1-1: new high speed USB device using ehci_hcd and address 13
[  537.965049] usb 1-1: device descriptor read/64, error -71
[  538.228083] usb 1-1: device descriptor read/64, error -71
[  538.445056] usb 1-1: new high speed USB device using ehci_hcd and address 14
[  538.604055] usb 1-1: device descriptor read/64, error -71

syslog:
Aug 16 07:55:58 linux kernel: [  556.216054] usb 2-1: new full speed USB device 
using ohci_hcd and address 12
Aug 16 07:55:59 linux kernel: [  556.397152] usb 2-1: device descriptor 
read/64, error -62
Aug 16 07:55:59 linux kernel: [  556.681048] usb 2-1: device descriptor 
read/64, error -62
Aug 16 07:55:59 linux kernel: [  556.961097] usb 2-1: new full speed USB device 
using ohci_hcd and address 13
Aug 16 07:56:00 linux kernel: [  557.369056] usb 2-1: device not accepting 
address 13, error -62
Aug 16 07:56:00 linux kernel: [  557.545049] usb 2-1: new full speed USB device 
using ohci_hcd and address 14
Aug 16 07:56:00 linux kernel: [  557.952068] usb 2-1: device not accepting 
address 14, error -62
Aug 16 07:56:00 linux kernel: [  557.952131] hub 2-0:1.0: unable to enumerate 
USB device on port 1

-- 
USB-Hard-Disc doesn't work in 9.10
https://bugs.launchpad.net/bugs/413921
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs