This last message fixed the problem.
After a complete system update and reboot HP printer works from boot up.
Thanks to all.
I write assembler code for intel, and c, c++.
If there are very small jobs I would gladly offer to code.
Would you point me in the right direction?
John
On Jul 19, 2010, at 4:38 AM, Till Kamppeter wrote:
The problem described here can also occur for non-HP USB printers, in
general when the printer is accessed via libusb. This does not only
happen when the printer is accessed through the hp CUPS backend of
HPLIP but also via the usb backend of CUPS when the usblp kernel
module is blacklisted or via manufacturer-supplied libusb-based CUPS
backends. In any case do a full system-update to get the updated libusb.
** Summary changed:
- After the last updates HP printer stopped working
+ After the last updates USB printers connected via HPLIP (or libusb in
general) stopped working
--
After the last updates USB printers connected via HPLIP (or libusb in
general) stopped working
https://bugs.launchpad.net/bugs/595650
You received this bug notification because you are a direct subscriber
of a duplicate bug (602087).
Status in HP Linux Imaging and Printing: Invalid
Status in “hplip” package in Ubuntu: Invalid
Status in “libusb” package in Ubuntu: Fix Released
Status in “linux” package in Ubuntu: Invalid
Status in “hplip” source package in Lucid: Invalid
Status in “libusb” source package in Lucid: Fix Released
Status in “linux” source package in Lucid: Invalid
Status in “hplip” source package in Maverick: Invalid
Status in “libusb” source package in Maverick: Fix Released
Status in “linux” source package in Maverick: Invalid
Bug description:
Binary package hint: cups
Hallo,
after the last updates my laserjet 1300 stopped working. cups still sees the
printer, but if I try to print a test page I get a communication error. In
/var/syslog I found:
hp[8640] prnt/backend/hp.c 752: INFO: open device failed stat=21:
hp:/usb/hp_LaserJet_1300?serial=00CNBD032941; will retry in 30 seconds...
Trying to print to this printer using windows (dual boot system) works fine.
More information:
lsmod|grep usb
usblp 10481 0
usbhid 36110 0
hid67032 1 usbhid
usb_storage39425 0
tail -f /var/log/messages after unplugging the printer:
Jun 17 21:09:14 darkstar kernel: [ 4260.312038] usb 5-1: USB disconnect,
address 13
Jun 17 21:09:14 darkstar kernel: [ 4260.312209] usblp0: removed
Jun 17 21:09:14 darkstar udev-configure-printer: Disabled printer
ipp://localhost:631/printers/hp-LaserJet-1300 as the corresponding device was
unplugged or turned off
Jun 17 21:09:14 darkstar udev-configure-printer: Disabled printer
ipp://localhost:631/printers/hp-LaserJet-1300 as the corresponding device was
unplugged or turned off
And after plugging in the printer again:
Jun 17 21:12:12 darkstar kernel: [ 4437.756299] usb 2-6.1: new full speed USB
device using ehci_hcd and address 21
Jun 17 21:12:12 darkstar kernel: [ 4437.850779] usb 2-6.1: configuration #1
chosen from 1 choice
Jun 17 21:12:12 darkstar kernel: [ 4437.852201] usblp0: USB Bidirectional
printer dev 21 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1017
Jun 17 21:12:13 darkstar kernel: [ 4439.199530] usb 2-6.1: usbfs: interface 0
claimed by usblp while 'usb' sets config #1
Jun 17 21:12:15 darkstar udev-configure-printer: Re-enabled printer
ipp://localhost:631/printers/hp-LaserJet-1300
And then:
lpinfo -v
direct scsi
network lpd
network ipp
network socket
network beh
serial serial:/dev/ttyS0?baud=115200
serial serial:/dev/ttyS1?baud=115200
network http
network smb
direct parallel:/dev/lp0
direct usb://HP/LaserJet%201300
direct hp:/usb/hp_LaserJet_1300?serial=00CNBD032941
direct hpfax
lsb_release -rd
Description:Ubuntu 10.04 LTS
Release:10.04
pt-cache policy cups
cups:
Installiert: 1.4.3-1ubuntu1
Kandidat: 1.4.3-1ubuntu1
Versions-Tabelle:
*** 1.4.3-1ubuntu1 0
500 http://de.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages
100 /var/lib/dpkg/status
1.4.3-1 0
500 http://de.archive.ubuntu.com/ubuntu/ lucid/main Packages
To unsubscribe from this bug, go to:
https://bugs.launchpad.net/hplip/+bug/595650/+subscribe
--
After the last updates USB printers connected via HPLIP (or libusb in general)
stopped working
https://bugs.launchpad.net/bugs/595650
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs