date:20110618

On Fri, 17 Jun 2011, Arnd Bergmann wrote:

 On Friday 17 June 2011 14:10:11 Dave Martin wrote:
 
  As part of the general effort to make open source on ARM better, I think 
  it would be great if we can disable the alignment fixups (or at least
  enable logging) and work with upstreams to get the affected packages
  fixed.
  
  For release images we might want to be more forgiving, but for development
  we have the option of being more aggressive.
 
 Yes, makes sense.
 
  These apps typically generate hundreds or thousands of faults per session,
  but not millions, but it's still quite a lot of noise in syslog.
 
 Then we should make sure that an appropriate rate limiting is in place,
 like the patch below (untested) would do.
 
   Arnd
 
 8---
 ARM: Add rate-limiting to alignment trap printk
 
 Malicious or buggy applications can easily flood syslog by accessing unaligned
 data. Better use printk_ratelimited for the warning to prevent this while also
 allowing us to see the important output.

No.  The logging doesn't happen by default.  You have to set the 
appropriate flag via the kernel cmdline or at runtime by echoing that 
flag to /proc/cpu/alignment which can be done by root only.  This is 
therefore a debugging facility that should not be rate limited otherwise 
it loses its purpose.

The only effective rate limiting configuration I would recommend is to 
SIGBUS misaligned accesses by default.  And that's also supported 
already with the right flag.


Nicolas

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

2011-06-18 Thread Paul Brook

  There is still going to be a small cost even in hardware fixup so this
  is very much worth solving despite it's becoming invisible because the
  chips are hiding / solving it already.
  
  But I believe that h/w feature is turned off in Linux by default. You
  have to add noalign to the kernel command line to enable.
 
 I think you'll find the hardware fixups are enabled by default on CPUs
 with that design, quite possibly it can't be turned off.

The situation is much more complicated than that.  There are two completely 
different models for misaligned accesses (v6 and pre-v6).  v7 cores are only 
required to support the former.

However even under the v6 model some instructions will fault on misaligned 
addresses, and the CPU may be configured to fault many others.  The exact 
behavior depends on the particular instruction chosen by the compiler.  I 
don't know whether Linux currently knows how to enable alignment checking on 
v6/v7 hardware.

 int main(int argc, char * argv[])
 {
 
   char buf[8];
   void *v = buf[1];
   unsigned int *p = (unsigned int *)v;

This does not (reliably) do what you expect.  The compiler need not align buf.

Paul

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

2011-06-18 Thread Andy Green


On 06/17/2011 08:17 PM, Somebody in the thread at some point said:

On 06/17/2011 08:11 AM, Andy Green wrote:

On 06/17/2011 01:10 PM, Somebody in the thread at some point said:

Hi -


I've recently become aware that a few packages are causing alignment
faults on ARM, and are relying on the alignment fixup emulation code in
the kernel in order to work.


Just a FYI a lot of later ARM chips are solving alignment fixups in
hardware in the Bus Interface Unit, so the problems won't show up in
kernel stats.


Such faults are very expensive in terms of CPU cycles, and can generally
only result from wrong code (for example, C/C++ code which violates the
relevant language standards, assembler which makes invalid assumptions,
or functions called with misaligned pointers due to other bugs).


Agreed it's usually evidence of something broken and / or evil in the code.

There is still going to be a small cost even in hardware fixup so this
is very much worth solving despite it's becoming invisible because the
chips are hiding / solving it already.



But I believe that h/w feature is turned off in Linux by default. You
have to add noalign to the kernel command line to enable.


I think you'll find the hardware fixups are enabled by default on CPUs 
with that design, quite possibly it can't be turned off.


This test was done on a Panda:

root@linaro:~# cat /proc/cmdline
console=tty0 console=ttyO2,115200n8 earlycon=ttyO2,115200n8 
earlyprintk=1 root=/dev/mmcblk0p2 rootwait ro fixrtc vram=32M 
omapfb.vram=0:16M,1:16M mem=456M


ie, nothing about noalign.

Test code crafted to blow alignment faults on the dereference:

#include stdio.h
#include string.h

int main(int argc, char * argv[])
{
 char buf[8];
 void *v = buf[1];
 unsigned int *p = (unsigned int *)v;

 strcpy(buf, abcdefg);

 printf(0x%08x\n, *p);

 return 0;
}

Default case with soft fixup enabled:

root@linaro:~# cat /proc/cpu/alignment
User:   0
System: 0
Skipped:0
Half:   0
Word:   0
DWord:  0
Multi:  0
User faults:2 (fixup)

root@linaro:~# gcc test.c
root@linaro:~# ./a.out
0x65646362

Test case with soft fixup disabled:

root@linaro:~# echo 0  /proc/cpu/alignment
root@linaro:~# cat /proc/cpu/alignment
User:   0
System: 0
Skipped:0
Half:   0
Word:   0
DWord:  0
Multi:  0
User faults:0 (ignored)

root@linaro:~# ./a.out
0x65646362

ie, the result is always fixed up on OMAP4 and kernel fixup code never 
gets an exception even.


-Andy

--
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

2011-06-18 Thread Arnd Bergmann

On Friday 17 June 2011, Nicolas Pitre wrote:
 On Fri, 17 Jun 2011, Arnd Bergmann wrote:
  On Friday 17 June 2011 14:10:11 Dave Martin wrote:
  
   As part of the general effort to make open source on ARM better, I think 
   it would be great if we can disable the alignment fixups (or at least
   enable logging) and work with upstreams to get the affected packages
   fixed.

 The only effective rate limiting configuration I would recommend is to 
 SIGBUS misaligned accesses by default.  And that's also supported 
 already with the right flag.
 

So should we change the default in the prerelease kernels to enable SIGBUS?
The immediate result of that would be to break firefox, which would
cause a lot of questions on the mailing list.

Arnd

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

2011-06-18 Thread Paul Brook

 char buf[8];
 void *v = buf[1];
 unsigned int *p = (unsigned int *)v;
  
  This does not (reliably) do what you expect.  The compiler need not align
  buf.
 
 Printing the value of p should clarify this.
 
 And, as we can see above, the simple accesses are left to the hardware
 to fix up.  However, if the misaligned access is performed using a
 64-bit value pointer, then the kernel will trap an exception and the
 access will be simulated.

I think you've missed my point.  gcc may (though unlikely in this case) choose 
to place buf at an odd address.  In which case p will happen to be properly 
aligned.

I'm not sure where you get 64-bit value pointer from.  *p is only a word 
sized access, and memcpy is defined in terms of bytes so will only be promoted 
to wider accesses when the compiler believes it is safe.

Paul

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

On Sat, 18 Jun 2011, Paul Brook wrote:

  char buf[8];
  void *v = buf[1];
  unsigned int *p = (unsigned int *)v;
   
   This does not (reliably) do what you expect.  The compiler need not align
   buf.
  
  Printing the value of p should clarify this.
  
  And, as we can see above, the simple accesses are left to the hardware
  to fix up.  However, if the misaligned access is performed using a
  64-bit value pointer, then the kernel will trap an exception and the
  access will be simulated.
 
 I think you've missed my point.  gcc may (though unlikely in this case) 
 choose 
 to place buf at an odd address.  In which case p will happen to be properly 
 aligned.

Sorry for being too vague.

My point is to print the value of p i.e. the actual address used to 
perform the access, which would confirm that the access is truly 
misaligned or not.  That won't force any particular alignment on the 
buffer obviously, but at least this would clear any doubt as to the 
validity of the test.

 I'm not sure where you get 64-bit value pointer from.  *p is only a word 
 sized access, and memcpy is defined in terms of bytes so will only be 
 promoted 
 to wider accesses when the compiler believes it is safe.

Again I probably was too vague.  So let me provide the actual code 
modified from Andy's expressing what I mean:

int main(int argc, char * argv[])
{
 char buf[8];
 void *v = buf[1];
 unsigned int *p = (unsigned int *)v;

 strcpy(buf, abcdefg);

 printf(*%p = 0x%08x\n, p, *p);

 return 0;
}

That's the original, modified to print the actual address used, which 
should confirm there is actually a misaligned access performed.  And in 
this case, confirmed by the kernel code I quoted previously, the 
hardware will perform the misaligned access by itself on ARMv6 and 
above.

Now, if we use this code instead:

int main(int argc, char * argv[])
{
 char buf[8];
 void *v = buf[1];
 unsigned long long *p = (unsigned long long *)v;

 strcpy(buf, abcdefg);

 printf(*p = 0x%016x\n, p, *p);

 return 0;
}

In this case the kernel alignment trap will be involved, and the stats 
in /proc/cpu/alignment will increase, as the hardware won't perform the 
access automatically here.

In both cases the result would be what people expects, although the 
second case will be far more expensive.


Nicolas

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

On Sat, 18 Jun 2011, Arnaud Patard wrote:

 Dave Martin dave.mar...@linaro.org writes:
 Hi,
 
  Hi all,
 
  I've recently become aware that a few packages are causing alignment
  faults on ARM, and are relying on the alignment fixup emulation code in
  the kernel in order to work.
 
  Such faults are very expensive in terms of CPU cycles, and can generally
  only result from wrong code (for example, C/C++ code which violates the
  relevant language standards, assembler which makes invalid assumptions,
  or functions called with misaligned pointers due to other bugs).
 
  Currently, on a natty Ubuntu desktop image I observe no faults except
  from firefox and mono-based apps (see below).
 
  As part of the general effort to make open source on ARM better, I think 
  it would be great if we can disable the alignment fixups (or at least
  enable logging) and work with upstreams to get the affected packages
  fixed.
 
  For release images we might want to be more forgiving, but for development
  we have the option of being more aggressive.
 
  The number of affected packages and bugs appears small enough for the
  fixing effort to be feasible, without temporarily breaking whole
  distros.
 
 
  For ARM, we can achieve the goal by augmenting the default kernel command-
  line options: either
 
  alignment=3
  Fix up each alingment fault, but also log the faulting address
  and name of the offending process to dmesg.
 
  alignment=5
  Pass each alignment fault to the user process as SIGBUS (fatal
  by default) and log the faulting address and name of the
  offending process to dmesg.
 
 iirc, someone sent some months/years ago a patch to change the default

That was me.

 but it has been rejected because there are (was ?) some libc including
 glibc doing some unaligned access [1], and this can happen early in the
 boot process. In this kind of case, things like getting a sigbus would
 hurt.

This is only partly true.

Rewind about 15 years ago when all that Linux supported was ARMv3.  On 
ARMv3 there is no instruction for doing half-word loads/stores, and no 
instruction to sign extend a loaded byte.

In those days, the compiler was relying on a documented and 
architecturally defined behavior of misaligned loads/stores which is to 
rotate the bytes comprising the otherwise aligned word, the rotation 
position being defined by the sub-word offset.  Doing so allowed for 
certain optimizations to avoid extra shifts and masks.

Then a bunch of binaries were built with a version of GCC making use of 
those misaligned access tricks.

Then came along ARMv4 with its LDRH, LDRSH, and LDRSB instructions, 
making those misaligned tricks unnecessary.  Hence GCC deprecated those 
optimizations.  Today only the old farts amongst us still remember about 
this.

So for quite a while now, having a misaligned access on ARM before ARMv6 
is quite likely to not produce the commonly expected result.  That's why 
there is code in the kernel to trap and fix up misaligned accesses.  
However, it is turned off by default for user space.  Why?

Turns out that a prominent ARM developer still has binaries from the 
ARMv3 era around, and the default of not fixing up misaligned user space 
accesses is for remaining compatible with them.

So if you do have a version of glibc that is not from 15 years ago (that 
would have to be a.out and not ELF if it was) then you do not want to 
let misaligned accesses go through unfixed, otherwise you'll simply have 
latent data corruption somewhere.

 Also, as noted by someone else in the thread, you do want to test on
 something like armv5* or v4* because there are high chances than the
 trap used by the alignment fix won't be triggered at all on = armv6.

Given that Linaro is working only with Thumb2-compiled  user space, that 
implies ARMv6 and above only.

 [1] See commit log of commit d944d549aa86e08cba080396513234cf048fee1f.

And note the if not fixed up, results in segfaults in that log, 
meaning that the current default is wrong for that case.


Nicolas

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Getting rid of alignment faults in userspace

On Sat, 18 Jun 2011, Nicolas Pitre wrote:

 int main(int argc, char * argv[])
 {
  char buf[8];
  void *v = buf[1];
  unsigned int *p = (unsigned int *)v;
 
  strcpy(buf, abcdefg);
 
  printf(*%p = 0x%08x\n, p, *p);
 
  return 0;
 }

Obviously, there is a buffer overflow here, so the buf array should be 
enlarged.


Nicolas

-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: Call For Testing: Natty Firefox users (or willing to install Natty in a VM)

2011-06-18 Thread Micah Gersten

On 06/17/2011 05:59 PM, Micah Gersten wrote:

 We need Natty users to test our latest Firefox Upgrade!

 *Background:*
 Firefox 4 will not receive any more point releases, but rather Firefox
 5 is the security update for Firefox 4.0.1. Upstream Mozilla has
 changed their release process and are using a rapid release schedule. 
 We will be following this new release schedule to continue to deliver
 a secure browsing experience to our users.

 Since Natty has Firefox 4, it will start this process immediately.
 Lucid and Maverick which are on 3.6.x will be transitioning to the new
 rapid release cycle once 3.6.x has reached end of life.

 Before releasing these updates to the public, we need testing of the
 following packages:

 * firefox
 * xul-ext-webfav
 * xul-ext-mozvoikko
 * xul-ext-bindwood
 * gecko-mediaplayer
 * moonlight-plugin-core

 We have published all these packages in a PPA [1], and, for your
 convenience, have copied these updates to natty-proposed.  You can
 either enable the Ubuntu Mozilla Security PPA (instructions to follow)
 or natty-proposed.  Please keep in mind, that natty-proposed might get
 you a lot of other extra packages as well.

 We need people running Natty in bare metal or a virtual machine. If
 you are willing to help, here's what you can do:

 Add the Ubuntu Mozilla Security PPA to your software sources:
 sudo add-apt-repository ppa:ubuntu-mozilla-security/ppa
 or
 enable natty-proposed

 Then, you can either run update-manager or:
 sudo apt-get update  sudo apt-get dist-upgrade

 Since there are very few packages, we are tracking this transition in
 bug 798484 [2].  I have added verification-needed-* tags for each of
 the packages that need testing.  If you find a bug, please file a new
 bug with all the details, then, comment with the bug # and the
 affected package name in the tracking bug [2].  If you see the
 verification-needed-* tag for a specific package, feel free to comment
 if you have tested the package and it works.  If you see a
 verification-done-* tag for a specific package, there is no need to
 comment that it works, but more testing is always appreciated.If
 you see a verification-failed-* tag for a specific package, please
 check if your bug has already been filed, if not, please file one with
 all the details and comment in the tracking bug with the bug # and the
 package name.

 Feel free to subscribe to this bug [2] to follow the progress, but be
 forewarned that you will probably get a lot of E-Mail from it.

 Please note, packages need to be tested to migrate to natty-security
 and natty-updates.

 Thanks to everyone in advance,
 Micah

 [1] https://launchpad.net/~ubuntu-mozilla-security/+archive/ppa
 https://edge.launchpad.net/%7Eubuntu-mozilla-security/+archive/ppa
 [2] https://bugs.launchpad.net/bugs/798484

 P.S.  The current final Firefox 5 build and moon are currently
 finishing building on armel and will be copied to natty-proposed over
 the weekend.  The other architectures' packages are available in the
 Ubuntu Mozilla Security PPA.
 -- 
 Micah Gersten
 Ubuntu Security Team

I want to apologize for leaving out this piece of information.  If
you're testing in natty-proposed everything is fine.  If you're testing
from the Ubuntu Mozilla Security PPA, anything that requires a language
pack will fail.  This is due to us switching to in source Firefox
language packs.  natty-proposed contains updated system language packs
which pull in the appropriate language pack from the firefox source.

Thank you,
Micah
-- 
ubuntu-devel mailing list
ubuntu-devel@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-devel

Re: About ubufox translation

2011-06-18 Thread Yaron Shahrabani

BabelZilla[1] allows translating Firefox extensions in a very convenient
way.
The problem is that once a translator is registered as the main translator
for an extensions nobody can translate or suggest strings to this
extension without his permission.

Narro[2] is the official translation tool for Mozilla's projects
(Firefox/Thunderbird/etc.), this tool has many disadvantages but he can do
the work.

I don't know if we should use these tools but we can definitely learn a
thing or two from them.

Please take into account that Virtaal is unable to handle such mission, some
of the information is lost along the way.

[1] - http://www.babelzilla.org/
[2] - https://l10n.mozilla.org/narro
Yaron Shahrabani

Hebrew translator




On Fri, Jun 17, 2011 at 10:33 AM, Tseng, Cheng-Chia pswo10...@gmail.comwrote:

 We have known that ubuntu uses ubufox extension for Firefox.

 Now the translation way is:
 First, we grab the code [1] and extract them, then go into Locale folder.
 Second, look for en-US folder and use it as template to create our
 translation.
 Third, create a bug report and upload your xx-XX compressed file.

 ***But after I created a bug report[2] for zh-TW translation more than
 a year ago, the bug is just keep pending now.***

 I think that we should do something for this situation.
 And we should ask those languages which do not have translations now
 to finish them together, and handle them at once.
 Any other ideas?

 1. https://code.launchpad.net/ubufox (you can use bzr branch
 lp:ubufox command to get a copy)
 2. https://bugs.launchpad.net/ubuntu-translations/+bug/542046

 --
 Sincerely,
 by Cheng-Chia Tseng

 --
 ubuntu-translators mailing list
 ubuntu-translators@lists.ubuntu.com
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-translators

-- 
ubuntu-translators mailing list
ubuntu-translators@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-translators

Re: Call for testing of the 5th language pack update for Ubuntu 10.10

2011-06-18 Thread Kenneth Nielsen

Oh well. It seems that we have made a mistake which means that there
is an error in all of these language packs. This means that they will
have to be rebuilt. Therefore, please stop testing the language
presently in maverick-proposed as the new ones will need to be tested
anyway when they arrive. We are very sorry for the inconvenience for
those of you that have already started testing.

Once again:
Testing of the these language packs are off for the time being. I'll
get back to you.

Regards Kenneth

2011/6/16 Kenneth Nielsen k.nielse...@gmail.com:
 Hi translators,

 After a small delay the next set of language packs for Ubuntu 10.10
 Maverick Meerkat are now ready.

 We've uploaded the language packs to the maverick-proposed repository
 for you to test before they are released to all users. These should
 contain all your updates and fixes in translations done since the
 release date.

 I'd like to ask teams to test them and provide an indication that
 they've done so by following some simple steps and submitting a
 signoff, so that we know that translations have been successfully
 tested.

 Simply follow the instructions in this page and add your team's
 signoff in the appropriate table:

  https://wiki.ubuntu.com/Translations/LanguagePackUpdatesQA

 The deadline for the testing is the 22th of June (in a week's time).
 After that, we'll update the language packs we've received feedback
 for into maverick-updates, so that all users can benefit from the new
 translations and fixes.

 Remember that you'll have to to enable the maverick-proposed repository
 to get these updates:

  https://wiki.ubuntu.com/Testing/EnableProposed

 Notes
 -

 Remember that now you can subscribe to the iCal feed to stay up to
 date with language pack updates and better coordinate your work:
 https://wiki.ubuntu.com/Translations/MaverickLanguagePackReleaseSchedule

 Thank you for your help in testing translations for all users in your 
 language!

 Regards,
 Kenneth.


-- 
ubuntu-translators mailing list
ubuntu-translators@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-translators

Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder o Recovery Disk

2011-06-18 Thread Zandre Bran

2011/6/17 Henry Cabral ikeno...@gmail.com:
 Senhores,

Ôlas Henry.

 Quero instalar o Ubuntu 11.04 em um computador Compaq, no qual já está
 instalado o Windows Vista, mas além do dual-boot, gostaria de não ter que
 excluir a partição do Recovery disk [...]

Tranquilo. Cria uma partição primária como / e coloca as outras
partições do Ubuntu, /home e /swap como estendidas.

-- []s
-- Zandre.

:: https://launchpad.net/~zandrebran
:: http://www.linuxacessivel.org
:: Centro de Computação - Unicamp: - Toca GNUuuu :)

-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder o Recovery Disk

2011-06-18 Thread Carlos Ribeiro

Olá Henry,

Primeiro confirme como funciona a restauração do Compaq. Caso seja
semelhante ao modo com que trabalhei há algum tempo, garanto que você terá
problema.

O que ocorre é que esses métodos de restauração deixam seu computador igual
a quando você o recebeu. Desta forma destroem todo o conteúdo do HD e
recriam as partições (caso tenham sido modificadas).

Assim, não só os documentos (fotos, vídeos, músicas, etc) serão perdidos,
como também as partições criadas para abrigar o Ubuntu desaparecerão.

Para evitar esta catástrofe, antes de efetuar a restauração do Windows salve
todos os arquivos, que não deseja perder, em outra mídia (pendrive, dvd, hd
externo).

Uma alternativa para este transtorno é criar uma partição NTFS para
armazenar esses arquivos importantes e fazer uma imagem da partição do
sistema, desde que esteja funcionando corretamente, que poderá ser usada
para restaurar quando necessário. Neste momento apenas os aplicativos que
foram instalados após a criação da imagem precisarão ser reinstalados. A
partição com os arquivos importantes e aqueles que contêm o Ubuntu, bem como
a MBR e a tabela de partições permanecerão inalteradas.

Este é o procedimento que adoto.

Abraço.

Carlos

Em 17 de junho de 2011 23:52, Henry Cabral ikeno...@gmail.com escreveu:

 Senhores,
 Quero instalar o Ubuntu 11.04 em um computador Compaq, no qual já está
 instalado o Windows Vista, mas além do dual-boot, gostaria de não ter que
 excluir a partição do Recovery disk, bem como manter sua funcionalidade,
 para caso eu tenha algum problema com o Windows Vista futuramente e precise
 restaurar as configurações de fábrica. Qual a solução? Pesquisando na
 internet achei a opção da ferramenta EasyBCD.
 --
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br




-- 
Se eu tiver que me transformar naqueles que combato para combatê-los,
prefiro entregar os pontos.
Eduardo Guimarães
http://edu.guim.blog.uol.com.br/arch2009-11-15_2009-11-21.html

CARLOS E YARA RIBEIRO
São Luís - Maranhão - Brasil
-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder o Recovery Disk

2011-06-18 Thread julio menezes

Henry,

Nao sei qual a versao do Vista veio instalada em seu Notebook.

Passei por uma situacao semelhante e vou descrever o que eu fiz.

O meu Note veio com o Vista Starter Original, * com etiqueta e tudo *.

O Vista Starter Original:
a) Nao permite compartilhamento de arquivos em rede ( rede capada )
b) Nao abre mais que 5 aplicativos  ( multitarefa capada )
c) Eh monousuario. ( isso eu ja sabia )

Para nao perder a garantia:
1) desfragmentei o disco, com o utilitario do ambiente grafico Vista.

2) Dei um boot com um Live CD do Sistema Operacional GNU/Linux, nao me recordo 
se fiz tudo com o CD do Ubuntu ou se usei algo tipo o RIPlinux ou 
http://www.sysresccd.org ou outro pois precisava do servico ssh para clonar o 
HD.

3) clonei a MBR para um pendrive, somente o boot e o boot+tabela de particoes. 
dd if=/dev/sda of=/media/pendrive/mbr446_boot.bin
dd if=/dev/sda of=/media/pendrive/mbr512_part.bin

4) clonei o HD inteiro e joguei em meu servidor (160GB)
dd if=/dev/sda | ssh usuarior@ip_do_server 'dd of=/diretorio_destino/sda.img' 

Fiz isso so porque me disseram que removendo o Vista eu perderia a garantia do 
Notebook. ( no comments )

5) particionei o disco redimencionando a /dev/sda1, mantendo o Vista.
( Queria testar R+W em NTFS ),
Aqui, nao me recordo que tamanho deixei, provavelmente 4GB para caber em u DVD. 
Hoje esta com um XP, *** que raramente uso ***,  e que instalei por causa do 
AutoCAD. Esta com 10GB. A imagem, 160GB, mantive por um tempo, depois apaguei.

6) Salvei as alteracoes de particionamento.

7) Dei o boot com o Ubuntu e instalei em Dualboot.

Como esperado, funcionou tudo certinho, inclusive Wi-Fi, webcam.

Espero que meu procedimento ajude.

[]s
julio

PS_1:
galera, no flames, please, nao sou contra quem use software privativo, 
respeito a individualidade e direito de escolha !
 
Ha tambem situacoes em que nao temos outra opcao.

PS_2:
Tentei levar na assistencia tecnica autorizada para pedir a remocao do ambiente 
grafico Vista e o reembolso do $ pago por ele.
Pedi ate para trocarem de HD e colocarem um em branco se necessario.
Vi que ia me aborrecer e nao ter o respaldo juridico, apesar de considerar como 
venda casada e eu nao queria pagar por algo que nao iria usar. ( enfim... )



--- Em sex, 17/6/11, Henry Cabral ikeno...@gmail.com escreveu:

 De: Henry Cabral ikeno...@gmail.com
 Assunto: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder 
 o Recovery Disk
 Para: ubuntu-br@lists.ubuntu.com
 Data: Sexta-feira, 17 de Junho de 2011, 23:52
 Senhores,
 Quero instalar o Ubuntu 11.04 em um computador Compaq, no
 qual já está
 instalado o Windows Vista, mas além do dual-boot, gostaria
 de não ter que
 excluir a partição do Recovery disk, bem como manter sua
 funcionalidade,
 para caso eu tenha algum problema com o Windows Vista
 futuramente e precise
 restaurar as configurações de fábrica. Qual a solução?
 Pesquisando na
 internet achei a opção da ferramenta EasyBCD.
 -- 
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
 
 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
 

-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

[Ubuntu-BR] reprodutor de filme travando

2011-06-18 Thread cesar

Saudações, estou com um probleminha em meu ubuntu 10.10, rodando em dell
inspiron com 4 GbRam.
Todos os meus filme, por menor que sejam, são reproduzidos
com congelamento da imagens, mesmo no youtube acontece!
Alguma dica pra sanar o problema?

-- 
Alberto Cesar Dias
-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder o Recovery Disk

2011-06-18 Thread julio menezes

Henry,

Mais umas observacoes:

1) A MBR foi clonada num pendrive para o caso de alguma pane no GRUB.

2) No redimensionamento das particoes, nao me recordo sobre a area de Recover, 
se existia, nao mantive. Se for o caso, preserve esta particao, nao deve ser 
grande.

3) No redimensionamento, cuide para nao gerar 

Partition does not end on cylinder boundary,

Nao da problemas no GNU/LINUX mas nao sei dizer no Vista.

boa sorte.

[]s
julio








  


--- Em sáb, 18/6/11, julio menezes yjmene...@yahoo.com.br escreveu:

 De: julio menezes yjmene...@yahoo.com.br
 Assunto: Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem 
 perder o Recovery Disk
 Para: Lista de discussão do LoCoTeam Brasileiro ubuntu-br@lists.ubuntu.com
 Data: Sábado, 18 de Junho de 2011, 10:43
 Henry,
 
 Nao sei qual a versao do Vista veio instalada em seu
 Notebook.
 
 Passei por uma situacao semelhante e vou descrever o que eu
 fiz.
 
 O meu Note veio com o Vista Starter Original, * com
 etiqueta e tudo *.
 
 O Vista Starter Original:
 a) Nao permite compartilhamento de arquivos em rede ( rede
 capada )
 b) Nao abre mais que 5 aplicativos  ( multitarefa
 capada )
 c) Eh monousuario. ( isso eu ja sabia )
 
 Para nao perder a garantia:
 1) desfragmentei o disco, com o utilitario do ambiente
 grafico Vista.
 
 2) Dei um boot com um Live CD do Sistema Operacional
 GNU/Linux, nao me recordo se fiz tudo com o CD do Ubuntu ou
 se usei algo tipo o RIPlinux ou http://www.sysresccd.org ou outro pois 
 precisava do
 servico ssh para clonar o HD.
 
 3) clonei a MBR para um pendrive, somente o boot e o
 boot+tabela de particoes. 
 dd if=/dev/sda of=/media/pendrive/mbr446_boot.bin
 dd if=/dev/sda of=/media/pendrive/mbr512_part.bin
 
 4) clonei o HD inteiro e joguei em meu servidor (160GB)
 dd if=/dev/sda | ssh usuarior@ip_do_server 'dd
 of=/diretorio_destino/sda.img' 
 
 Fiz isso so porque me disseram que removendo o Vista eu
 perderia a garantia do Notebook. ( no comments )
 
 5) particionei o disco redimencionando a /dev/sda1,
 mantendo o Vista.
 ( Queria testar R+W em NTFS ),
 Aqui, nao me recordo que tamanho deixei, provavelmente 4GB
 para caber em u DVD. Hoje esta com um XP, *** que raramente
 uso ***,  e que instalei por causa do AutoCAD. Esta com
 10GB. A imagem, 160GB, mantive por um tempo, depois
 apaguei.
 
 6) Salvei as alteracoes de particionamento.
 
 7) Dei o boot com o Ubuntu e instalei em Dualboot.
 
 Como esperado, funcionou tudo certinho, inclusive Wi-Fi,
 webcam.
 
 Espero que meu procedimento ajude.
 
 []s
 julio
 
 PS_1:
 galera, no flames, please, nao sou contra quem use
 software privativo, respeito a individualidade e direito de
 escolha !
  
 Ha tambem situacoes em que nao temos outra opcao.
 
 PS_2:
 Tentei levar na assistencia tecnica autorizada para pedir a
 remocao do ambiente grafico Vista e o reembolso do $ pago
 por ele.
 Pedi ate para trocarem de HD e colocarem um em branco se
 necessario.
 Vi que ia me aborrecer e nao ter o respaldo juridico,
 apesar de considerar como venda casada e eu nao queria pagar
 por algo que nao iria usar. ( enfim... )
 
 
 
 --- Em sex, 17/6/11, Henry Cabral ikeno...@gmail.com
 escreveu:
 
  De: Henry Cabral ikeno...@gmail.com
  Assunto: [Ubuntu-BR] Instalação do Ubuntu depois do
 Windows Vista, sem perder o Recovery Disk
  Para: ubuntu-br@lists.ubuntu.com
  Data: Sexta-feira, 17 de Junho de 2011, 23:52
  Senhores,
  Quero instalar o Ubuntu 11.04 em um computador Compaq,
 no
  qual já está
  instalado o Windows Vista, mas além do dual-boot,
 gostaria
  de não ter que
  excluir a partição do Recovery disk, bem como manter
 sua
  funcionalidade,
  para caso eu tenha algum problema com o Windows Vista
  futuramente e precise
  restaurar as configurações de fábrica. Qual a
 solução?
  Pesquisando na
  internet achei a opção da ferramenta EasyBCD.
  -- 
  Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
  
  Lista de discussão Ubuntu Brasil
  Histórico, descadastramento e outras opções:
  https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
  
 
 -- 
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
 
 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
 

-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] Instalação do Ubuntu depois do Windows Vista, sem perder o Recovery Disk

2011-06-18 Thread Nelson Corrêa

Carlos,

Não tenho certeza se o restaurador do Windows vai conseguir identificar
uma nova partição primária e reformatá-la. Acho que ele vai se contentar
com o novo tamanho das partições que ele conhecia quando foi instalado.
Já tive uma experiência de restaurar um Windows 7 OEM e ele deixou o
Ubuntu em paz. Mas cag, digo, atrapalhou as opções de boot, detonando o
Grub. O que foi facilmente corrigido.

Abraços e sucesso,
Nelson

On 06/18/2011 09:39 AM, Carlos Ribeiro wrote:
 Olá Henry,

 Primeiro confirme como funciona a restauração do Compaq. Caso seja
 semelhante ao modo com que trabalhei há algum tempo, garanto que você terá
 problema.

 O que ocorre é que esses métodos de restauração deixam seu computador igual
 a quando você o recebeu. Desta forma destroem todo o conteúdo do HD e
 recriam as partições (caso tenham sido modificadas).

 Assim, não só os documentos (fotos, vídeos, músicas, etc) serão perdidos,
 como também as partições criadas para abrigar o Ubuntu desaparecerão.

 Para evitar esta catástrofe, antes de efetuar a restauração do Windows salve
 todos os arquivos, que não deseja perder, em outra mídia (pendrive, dvd, hd
 externo).

 Uma alternativa para este transtorno é criar uma partição NTFS para
 armazenar esses arquivos importantes e fazer uma imagem da partição do
 sistema, desde que esteja funcionando corretamente, que poderá ser usada
 para restaurar quando necessário. Neste momento apenas os aplicativos que
 foram instalados após a criação da imagem precisarão ser reinstalados. A
 partição com os arquivos importantes e aqueles que contêm o Ubuntu, bem como
 a MBR e a tabela de partições permanecerão inalteradas.

 Este é o procedimento que adoto.

 Abraço.

 Carlos

 Em 17 de junho de 2011 23:52, Henry Cabral ikeno...@gmail.com escreveu:

 Senhores,
 Quero instalar o Ubuntu 11.04 em um computador Compaq, no qual já está
 instalado o Windows Vista, mas além do dual-boot, gostaria de não ter que
 excluir a partição do Recovery disk, bem como manter sua funcionalidade,
 para caso eu tenha algum problema com o Windows Vista futuramente e precise
 restaurar as configurações de fábrica. Qual a solução? Pesquisando na
 internet achei a opção da ferramenta EasyBCD.
 --
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br




-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] reprodutor de filme travando

2011-06-18 Thread cesar

saudações, os vídeos travam, mesmo os salvos no hd. Sim ja tentei outro
aplicativo, todos baseados em GStreamer,
Funcionava bem e agora só trava!

Grato,

cesar


Em 18 de junho de 2011 12:39, Nelson Corrêa nelson.ubu...@gmail.comescreveu:

 Olá Cesar,

 O Ubuntu não tem nenhuma dificuldade de reprodução de vídeo, portanto,
 vc realmente tem um problema. Vamos tentar ajudar.

 Você falou que todos seus vídeos congelam imagens, mesmo no Youtube.
 Explica prá gente se o congelamento ocorre só com streaming, ou seja
 os vídeos que você vê na Internet em tempo real, como o Youtube, ou se
 ocorre também quando você assiste um vídeo que está no seu HD.

 Qual o player que você está usando? Já experimentou outro player? Antes
 funcionava bem ou nunca funcionou bem?

 Aguardamos suas respostas.

 Abraços e sucesso,
 Nelson

 On 06/18/2011 11:06 AM, cesar wrote:
  Saudações, estou com um probleminha em meu ubuntu 10.10, rodando em dell
  inspiron com 4 GbRam.
  Todos os meus filme, por menor que sejam, são reproduzidos
  com congelamento da imagens, mesmo no youtube acontece!
  Alguma dica pra sanar o problema?
 

 --
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br




-- 
Alberto Cesar Dias
-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] reprodutor de filme travando

2011-06-18 Thread julio menezes

Cesar,

Como ja testou localmente, pode ser problema de driver.
Nao sei se voce habilitou o repositorio * restricted * no Synaptic. Voce  
poderia tentar reinstalar o driver de video.

[]s
julio

--- Em sáb, 18/6/11, cesar ce...@alba.ba.gov.br escreveu:

 De: cesar ce...@alba.ba.gov.br
 Assunto: Re: [Ubuntu-BR] reprodutor de filme travando
 Para: Lista de discussão do LoCoTeam Brasileiro ubuntu-br@lists.ubuntu.com
 Data: Sábado, 18 de Junho de 2011, 17:30
 saudações, os vídeos travam, mesmo
 os salvos no hd. Sim ja tentei outro
 aplicativo, todos baseados em GStreamer,
 Funcionava bem e agora só trava!
 
 Grato,
 
 cesar
 
 
 Em 18 de junho de 2011 12:39, Nelson Corrêa nelson.ubu...@gmail.comescreveu:
 
  Olá Cesar,
 
  O Ubuntu não tem nenhuma dificuldade de reprodução
 de vídeo, portanto,
  vc realmente tem um problema. Vamos tentar ajudar.
 
  Você falou que todos seus vídeos congelam imagens,
 mesmo no Youtube.
  Explica prá gente se o congelamento ocorre só com
 streaming, ou seja
  os vídeos que você vê na Internet em tempo real,
 como o Youtube, ou se
  ocorre também quando você assiste um vídeo que
 está no seu HD.
 
  Qual o player que você está usando? Já experimentou
 outro player? Antes
  funcionava bem ou nunca funcionou bem?
 
  Aguardamos suas respostas.
 
  Abraços e sucesso,
  Nelson
 
  On 06/18/2011 11:06 AM, cesar wrote:
   Saudações, estou com um probleminha em meu
 ubuntu 10.10, rodando em dell
   inspiron com 4 GbRam.
   Todos os meus filme, por menor que sejam, são
 reproduzidos
   com congelamento da imagens, mesmo no youtube
 acontece!
   Alguma dica pra sanar o problema?
  
 
  --
  Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
 
  Lista de discussão Ubuntu Brasil
  Histórico, descadastramento e outras opções:
  https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
 
 
 
 
 -- 
 Alberto Cesar Dias
 -- 
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
 
 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
 

-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

Re: [Ubuntu-BR] reprodutor de filme travando

2011-06-18 Thread cesar

Srs. muitíssimo grato, resolvido o problema, melhorou até as imagens!

Valeu mesmo galera.

Cesar



Em 18 de junho de 2011 17:51, julio menezes yjmene...@yahoo.com.brescreveu:

 Cesar,

 Como ja testou localmente, pode ser problema de driver.
 Nao sei se voce habilitou o repositorio * restricted * no Synaptic. Voce
  poderia tentar reinstalar o driver de video.

 []s
 julio

 --- Em sáb, 18/6/11, cesar ce...@alba.ba.gov.br escreveu:

  De: cesar ce...@alba.ba.gov.br
  Assunto: Re: [Ubuntu-BR] reprodutor de filme travando
  Para: Lista de discussão do LoCoTeam Brasileiro 
 ubuntu-br@lists.ubuntu.com
  Data: Sábado, 18 de Junho de 2011, 17:30
  saudações, os vídeos travam, mesmo
  os salvos no hd. Sim ja tentei outro
  aplicativo, todos baseados em GStreamer,
  Funcionava bem e agora só trava!
 
  Grato,
 
  cesar
 
 
  Em 18 de junho de 2011 12:39, Nelson Corrêa nelson.ubu...@gmail.com
 escreveu:
 
   Olá Cesar,
  
   O Ubuntu não tem nenhuma dificuldade de reprodução
  de vídeo, portanto,
   vc realmente tem um problema. Vamos tentar ajudar.
  
   Você falou que todos seus vídeos congelam imagens,
  mesmo no Youtube.
   Explica prá gente se o congelamento ocorre só com
  streaming, ou seja
   os vídeos que você vê na Internet em tempo real,
  como o Youtube, ou se
   ocorre também quando você assiste um vídeo que
  está no seu HD.
  
   Qual o player que você está usando? Já experimentou
  outro player? Antes
   funcionava bem ou nunca funcionou bem?
  
   Aguardamos suas respostas.
  
   Abraços e sucesso,
   Nelson
  
   On 06/18/2011 11:06 AM, cesar wrote:
Saudações, estou com um probleminha em meu
  ubuntu 10.10, rodando em dell
inspiron com 4 GbRam.
Todos os meus filme, por menor que sejam, são
  reproduzidos
com congelamento da imagens, mesmo no youtube
  acontece!
Alguma dica pra sanar o problema?
   
  
   --
   Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
  
   Lista de discussão Ubuntu Brasil
   Histórico, descadastramento e outras opções:
   https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
  
 
 
 
  --
  Alberto Cesar Dias
  --
  Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece
 
  Lista de discussão Ubuntu Brasil
  Histórico, descadastramento e outras opções:
  https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
 

 --
 Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

 Lista de discussão Ubuntu Brasil
 Histórico, descadastramento e outras opções:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-br




-- 
Alberto Cesar Dias
-- 
Mais sobre o Ubuntu em português: http://www.ubuntu-br.org/comece

Lista de discussão Ubuntu Brasil
Histórico, descadastramento e outras opções:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-br

[Ubuntu-be] New 'Hybrid' image in 11.10 (iso/usb project)

2011-06-18 Thread wouter Vandenneucker


hey guys
I was browsing the web and found this: http://www.ubuntu-corner.com/?p=773
It's about the way things are being handled in the new build of ubuntu.By 
default the new ISO can be put on a USB stick and will work out of the box 
without any extra app needed.
grts

Wouter-- 
ubuntu-be mailing list / mailto:ubuntu-be@lists.ubuntu.com

Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-be

Re: [Ubuntu-be] New 'Hybrid' image in 11.10 (iso/usb project)

2011-06-18 Thread Maik Adamietz

On Sat, Jun 18, 2011 at 10:36 AM, wouter Vandenneucker 
wouterv...@hotmail.com wrote:

  hey guys

 I was browsing the web and found this: http://www.ubuntu-corner.com/?p=773

 It's about the way things are being handled in the new build of ubuntu.
 By default the new ISO can be put on a USB stick and will work out of the
 box without any extra app needed.

 grts


 Wouter

 --
 ubuntu-be mailing list / mailto:ubuntu-be@lists.ubuntu.com

 Modify settings or unsubscribe at:
 https://lists.ubuntu.com/mailman/listinfo/ubuntu-be


Yes, i heard about that a few days back on the Xubuntu Devel channel on IRC.
Sounds promising.

-- 
Maik

http://wearetechguys.com
-- 
ubuntu-be mailing list / mailto:ubuntu-be@lists.ubuntu.com

Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-be

Re: Лечим виндовую кодировку в zip архивах

2011-06-18 Thread Alex Emergy

PPA: https://launchpad.net/~alex-emergy/+archive/rus-zip

16.06.2011 18:25, Vitaliy Fust пишет:

16 июня 2011 г. 16:40 пользователь Alex Emergyalex.eme...@gmail.com написал:

как аккуратно и удобно

это скорее мой способ. В гуях то тоже проблема исправляется

Мне не нравится только отсутствие этих пакетиков в ppa, если сделаешь
и будешь стабильно обновлять будет супер-пупер :) Мне удобно когда как
можно меньше пакетов не обновляется самостоятельно, система постоянно
куррент.. Да и дольше компилировать, и не просто клацать, а думать
надо.

16 июня 2011 г. 16:38 пользователь Pivushkov Alexandrp...@icp.ac.ru написал:

Да с папками ~/.zip как раз то все ясно. Вопрос съест ли что то похожее
Nautilus также как dolphin?

Если мне не изменяет память, скрипт был нагуглен как раз под наутилус,
правда могу ошибаться. Да и xrefresh -white как бы на это намекает,
так что скорее всего я просто переправил наутилус на долфин.

Занимаюсь аккуратным переводом компов на убунту. Проблема кракозябров в
zip-ах это проблема № 2. Поэтому интересуюсь очень как аккуратно и
удобно для пользователя сделать...

Плюс потому, что оно открывается в каталоге и вопрос с кнопками аля
распаковать отпадает. Минус, что для раных раров (а что нужно кроме
зипа-рара?) не будет открываться так же, если не сделать аналогичный
скрипт монтирования рара (что более чем реально и достаточно просто).
Если нужно могу написать, за одно и себе будет.

--
С уважением,
Alex Emergy

--
ubuntu-ru mailing list
ubuntu-ru@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru

adding static ip to NM = no dhcp

2011-06-18 Thread Carl Karsten

If this is expected, I'll just add a 2nd config.  But it strikes me as odd,
so I will assume something is broken.

I want to _add_ a config to Network Manager.  For some reason this code in
my late_command resulted in no wired connection 1 dhcp that is normally
there.

Here is what I added to late_command

  cd $TARGET/etc/NetworkManager/system-connections
  INI=10.0.0.1.ini
  wget http://$SHAZ/$INI
  _uuid=$(chroot $TARGET uuidgen)
   sed -i s|@UUID@|${_uuid}| $INI
  chmod 600 $INI

# 10.0.0.1.ini
[connection]
id=10.0.0.1
uuid=@UUID@
type=802-3-ethernet
autoconnect=false

[ipv4]
method=manual
addresses1=10.0.0.1;8;0.0.0.0;

[802-3-ethernet]
duplex=full
# mac-address=0:24:81:b1:d:90

[ipv6]
method=ignore



-- 
Carl K
-- 
Ubuntu-installer mailing list
Ubuntu-installer@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-installer

[Bug 776103] Re: package open-vm-dkms 2011.03.28-387002-0ubuntu2 fails to build against 2.6.39 kernels, due to missing linux/smp_lock.h

2011-06-18 Thread dj_palindrome

Nate, I believe you are on the right track.

I know this is not the type of feedback you need (or want) in this
venue. After all, my virtual platform is Debian Sid, not Oneiric; and my
kernel is 2.6.39-2, not 3.0-rcx. But the underlying problems seem to
be from the same causes.

And I know all the dire warnings about installing Ubuntu binaries on
Debian, or the reverse. But one of the reasons I virtualize non-
production environments is so that I *can* screw them up ;-)

But the great news is that DKMS *finally* doesn't croak:


# dpkg -i *.deb

Selecting previously deselected package open-vm-dkms.

(Reading database ... 332857 files and directories currently installed.)
Unpacking open-vm-dkms (from open-vm-dkms_2011.05.27-420096-0~ppa9_all.deb) ...
dpkg: warning: downgrading open-vm-source from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-source 1:8.4.2-261024-1 (using 
open-vm-source_2011.05.27-420096-0~ppa9_all.deb) ...
Unpacking replacement open-vm-source ...
dpkg: warning: downgrading open-vm-toolbox from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-toolbox 1:8.4.2-261024-1 (using 
open-vm-toolbox_2011.05.27-420096-0~ppa9_amd64.deb) ...
Unpacking replacement open-vm-toolbox ...
dpkg: warning: downgrading open-vm-tools from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-tools 1:8.4.2-261024-1 (using 
open-vm-tools_2011.05.27-420096-0~ppa9_amd64.deb) ...
Stopping open-vm guest daemon: vmtoolsd.
Removing open-vm-tools modules: vmhgfs
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
 vmmemctl
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
FATAL: Module vmmemctl not found.
 vmsync
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
.
Unpacking replacement open-vm-tools ...
dpkg: warning: downgrading open-vm-tools-dbg from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-tools-dbg 1:8.4.2-261024-1 (using 
open-vm-tools-dbg_2011.05.27-420096-0~ppa9_amd64.deb) ...
Unpacking replacement open-vm-tools-dbg ...
Setting up open-vm-dkms (2011.05.27-420096-0~ppa9) ...
Loading new open-vm-tools-2011.05.27 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.39-2-amd64
Building for architecture amd64
Building initial module for 2.6.39-2-amd64
Done.

vmblock.ko:
Running module version sanity check.

Error! Module version 1.1.2.0 for vmblock.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.1.2.0).
You may override by specifying --force.

vmci.ko:
Running module version sanity check.

Good news! Module version 9.2.0.0 for vmci.ko
exactly matches what is already found in kernel 2.6.39-2-amd64.
DKMS will not replace this module.
You may override by specifying --force.

vmhgfs.ko:
Running module version sanity check.

Error! Module version 1.4.1.1 for vmhgfs.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.4.1.1).
You may override by specifying --force.

vmsync.ko:
Running module version sanity check.

Error! Module version 1.1.0.1 for vmsync.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.1.0.1).
You may override by specifying --force.

vmxnet.ko:
Running module version sanity check.

Good news! Module version 2.0.9.0 for vmxnet.ko
exactly matches what is already found in kernel 2.6.39-2-amd64.
DKMS will not replace this module.
You may override by specifying --force.

vsock.ko:
Running module version sanity check.

Good

[Bug 799052] [NEW] package freeradius 2.1.8 dfsg-1ubuntu1 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2 zurück

2011-06-18 Thread Dirk Johanns

Public bug reported:

Binary package hint: freeradius

I don't know

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: freeradius 2.1.8+dfsg-1ubuntu1
ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
Uname: Linux 2.6.32-32-generic i686
Architecture: i386
Date: Sat Jun 18 07:16:52 2011
ErrorMessage: Unterprozess installiertes post-installation-Skript gab den 
Fehlerwert 2 zurück
SourcePackage: freeradius
Title: package freeradius 2.1.8+dfsg-1ubuntu1 failed to install/upgrade: 
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2 zurück

** Affects: freeradius (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 lucid

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to freeradius in Ubuntu.
https://bugs.launchpad.net/bugs/799052

Title:
  package freeradius 2.1.8 dfsg-1ubuntu1 failed to install/upgrade:
  Unterprozess installiertes post-installation-Skript gab den Fehlerwert
  2 zurück

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeradius/+bug/799052/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799052] Re: package freeradius 2.1.8 dfsg-1ubuntu1 failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2 zurück

2011-06-18 Thread Dirk Johanns

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to freeradius in Ubuntu.
https://bugs.launchpad.net/bugs/799052

Title:
  package freeradius 2.1.8 dfsg-1ubuntu1 failed to install/upgrade:
  Unterprozess installiertes post-installation-Skript gab den Fehlerwert
  2 zurück

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeradius/+bug/799052/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799053] [NEW] package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade: dahdi kernel module failed to build

2011-06-18 Thread Allan Harvey

Public bug reported:

Binary package hint: dahdi-linux

Installing package - package would not install

ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: dahdi-dkms 1:2.3.0.1+dfsg-2ubuntu2
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic i686
Architecture: i386
Date: Sat Jun 18 14:13:56 2011
ErrorMessage: dahdi kernel module failed to build
InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
PackageArchitecture: all
PackageVersion: 1:2.3.0.1+dfsg-2ubuntu2
SourcePackage: dahdi-linux
Title: package dahdi-dkms 1:2.3.0.1+dfsg-2ubuntu2 failed to install/upgrade: 
dahdi kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: dahdi-linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 natty

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to dahdi-linux in Ubuntu.
https://bugs.launchpad.net/bugs/799053

Title:
  package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade:
  dahdi kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dahdi-linux/+bug/799053/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799053] Re: package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade: dahdi kernel module failed to build

2011-06-18 Thread Allan Harvey

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to dahdi-linux in Ubuntu.
https://bugs.launchpad.net/bugs/799053

Title:
  package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade:
  dahdi kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dahdi-linux/+bug/799053/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 599342] Re: Temporary failure in name resolution

2011-06-18 Thread Mark - Syminet

But what if your DNS servers, are also your guests?

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in Ubuntu.
https://bugs.launchpad.net/bugs/599342

Title:
  Temporary failure in name resolution

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/599342/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799071] [NEW] Natty: * Starting KVM [fail]

2011-06-18 Thread Detlef Lechner

Public bug reported:

Binary package hint: qemu-kvm

I installed Natty on a new hard disk on a newly bought computer. I installed 
the package kvm.
Now Natty prints this message when booting or thawing.
I expect that Natty will not print this error message.

ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: kvm 1:84+dfsg-0ubuntu16+0.14.0+noroms+0ubuntu4.1
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
Architecture: amd64
Date: Sat Jun 18 09:39:52 2011
InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1)
KvmCmdLine: Error: command ['ps', '-C', 'kvm', '-F'] failed with exit code 1: 
UIDPID  PPID  CSZ   RSS PSR STIME TTY  TIME CMD
MachineType: LENOVO 6464W71
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcEnviron:
 LANGUAGE=en
 PATH=(custom, user)
 LANG=de_DE.UTF-8
 LC_MESSAGES=en_US.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic 
root=UUID=328670f9-63b9-4f64-9656-ae047ab66f5f ro quiet splash vt.handoff=7
SourcePackage: qemu-kvm
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/22/2007
dmi.bios.vendor: LENOVO
dmi.bios.version: 7LET51WW (1.21 )
dmi.board.name: 6464W71
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr7LET51WW(1.21):bd08/22/2007:svnLENOVO:pn6464W71:pvrThinkPadT61:rvnLENOVO:rn6464W71:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 6464W71
dmi.product.version: ThinkPad T61
dmi.sys.vendor: LENOVO

** Affects: qemu-kvm (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug natty

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/799071

Title:
  Natty: * Starting KVM [fail]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/799071/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799071] Re: Natty: * Starting KVM [fail]

2011-06-18 Thread Detlef Lechner

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/799071

Title:
  Natty: * Starting KVM [fail]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/799071/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799082] [NEW] kpartx -a /dev/drbd1 only gives back error: device-mapper: resume ioctl failed: Invalid argument

2011-06-18 Thread Thomas Schweikle

Public bug reported:

Binary package hint: multipath-tools

Trying to create device nodes for a virtual hd on a real lvm:

# kpartx -a /dev/drbd2
device-mapper: resume ioctl failed: Invalid argument
device-mapper: reload ioctl failed: Invalid argument
device-mapper: reload ioctl failed: Invalid argument

I'd expect it to create the nodes allowing my to mount them.

ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: multipath-tools 0.4.8-14ubuntu4
ProcVersionSignature: Ubuntu 2.6.35-28.50-server 2.6.35.11
Uname: Linux 2.6.35-28-server x86_64
Architecture: amd64
Date: Sat Jun 18 10:23:28 2011
InstallationMedia: Ubuntu-Server 10.10 Maverick Meerkat - Release amd64 
(20101007)
ProcEnviron:
 SHELL=/bin/bash
 PATH=(custom, user)
 LANG=de_DE.UTF-8
SourcePackage: multipath-tools

** Affects: multipath-tools (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug maverick

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/799082

Title:
  kpartx -a /dev/drbd1 only gives back error: device-mapper: resume
  ioctl failed: Invalid argument

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/799082/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799082] Re: kpartx -a /dev/drbd1 only gives back error: device-mapper: resume ioctl failed: Invalid argument

2011-06-18 Thread Thomas Schweikle

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/799082

Title:
  kpartx -a /dev/drbd1 only gives back error: device-mapper: resume
  ioctl failed: Invalid argument

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/799082/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799109] [NEW] package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 75

2011-06-18 Thread JP DARD

Public bug reported:

Binary package hint: postfix

package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le sous-
processus script post-installation installé a retourné une erreur de
sortie d'état 75

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: postfix 2.7.0-1ubuntu0.2
ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
Uname: Linux 2.6.32-32-generic i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sat Jun 18 10:33:57 2011
ErrorMessage: le sous-processus script post-installation installé a retourné 
une erreur de sortie d'état 75
SourcePackage: postfix
Title: package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le 
sous-processus script post-installation installé a retourné une erreur de 
sortie d'état 75

** Affects: postfix (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 lucid

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to postfix in Ubuntu.
https://bugs.launchpad.net/bugs/799109

Title:
  package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le sous-
  processus script post-installation installé a retourné une erreur de
  sortie d'état 75

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/799109/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799109] Re: package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 75

2011-06-18 Thread JP DARD

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to postfix in Ubuntu.
https://bugs.launchpad.net/bugs/799109

Title:
  package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: le sous-
  processus script post-installation installé a retourné une erreur de
  sortie d'état 75

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/799109/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 599342] Re: Temporary failure in name resolution

2011-06-18 Thread Robert Sander

I am sorry for the delay.

It looks like the grep from comment #13 will do the trick on standalone
systems.

Unfortunately we have moved away from KVM on our systems, so that I am
not able to test it right now.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in Ubuntu.
https://bugs.launchpad.net/bugs/599342

Title:
  Temporary failure in name resolution

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/599342/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 50430] Re: NIS has problems starting before the network comes up

2011-06-18 Thread Claudio Bernardini

Solution suggested by gwir above does not solve the problem on Natty 11.04.
I still need to restart autofs by hand to get access to my NFS remote home 
directories and so to my Ubuntu desktop.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to autofs in Ubuntu.
https://bugs.launchpad.net/bugs/50430

Title:
  NIS has problems starting before the network comes up

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/autofs/+bug/50430/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 599342] Re: Temporary failure in name resolution

2011-06-18 Thread Mark - Syminet

Might stand to rephrase:

What if your DNS servers, are your guests?

And btw?  Thanks for all you do.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to libvirt in Ubuntu.
https://bugs.launchpad.net/bugs/599342

Title:
  Temporary failure in name resolution

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/599342/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799166] [NEW] KVM virtual machines crash with host on linux-image-2.6.32-32-server on AMD processor

2011-06-18 Thread Seb James

Public bug reported:

Binary package hint: qemu-kvm

Since the 31st May I've been seeing random crashes in the virtual
machines that we run on an AMD processor based system in our office. We
run Ubuntu 10.04 on this server, which is a Dell T105 and I keep it
patched with all the updates. The virtual machines we run are all very
similar - they're our own build of Linux based around a 2.6.31 kernel.

On 31st of May, from looking at dpkg files, I see that I upgraded the
system's kernel to linux-image-2.6.32-32-server.

The crashes occur most commonly when these machines are doing lots of
processing, with libpoppler, ghostscript and our own software using most
of the cpu time.

I found that if I downgrade the kernel from linux-image-2.6.32-32-server
to linux-image-2.6.32-31-server on the Dell T105, then the system is
stable.

I tried upgrading the kernel to a prerelease linux-
image-2.6.32-33-server but still saw the freezes.

I tried the same virtual machines on two Dell T105 servers (1 dual-core
AMD Opteron 1214 processor) and on a Dell R210 server, running an Intel
Xeon processor. The crashes can be reliably caused on both of the AMD
based machines, but it seems that on the Intel based machine, linux-
image-2.6.32-32-server will happily run KVM virtual machines without
crashes.

Looks like one of changes in the kernel between 2.6.32-31 and 2.6.32-32
is the cause of this problem.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: qemu-kvm 0.12.3+noroms-0ubuntu9.9
ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
Uname: Linux 2.6.32-32-generic x86_64
Architecture: amd64
Date: Sat Jun 18 15:52:52 2011
InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
KvmCmdLine:
 UIDPID  PPID  CSZ   RSS PSR STIME TTY  TIME CMD
 root  1934 1  5 178312 201544 0 15:49 ?00:00:12 /usr/bin/kvm 
-S -M pc-0.11 -enable-kvm -m 498 -smp 1 -name vpa5900 -uuid 
770320e2-2d12-92cf-e5a9-97da88c3fd27 -chardev 
socket,id=monitor,path=/var/lib/libvirt/qemu/vpa5900.monitor,server,nowait 
-monitor chardev:monitor -boot c -drive 
file=/var/vm/vpa5900/sda.qcow2,if=scsi,index=0,boot=on,format=qcow2,cache=none 
-net nic,macaddr=52:54:00:61:36:00,vlan=0,model=virtio,name=virtio.0 -net 
tap,fd=35,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 
-parallel none -usb -vnc 192.168.0.18:0 -vga std
 root  1986 1  5 179013 204496 0 15:49 ?00:00:13 /usr/bin/kvm 
-S -M pc-0.11 -enable-kvm -m 498 -smp 1 -name vpa5901 -uuid 
57cff0db-ab19-01fe-a2ea-3e127473c0e2 -chardev 
socket,id=monitor,path=/var/lib/libvirt/qemu/vpa5901.monitor,server,nowait 
-monitor chardev:monitor -boot c -drive 
file=/var/vm/vpa5901/sda.qcow2,if=scsi,index=0,boot=on,format=qcow2,cache=none 
-net nic,macaddr=52:54:00:4e:3e:33,vlan=0,model=virtio,name=virtio.0 -net 
tap,fd=36,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 
-parallel none -usb -vnc 192.168.0.18:1 -vga std
 root  2117 1 82 182383 337276 0 15:49 ?00:02:48 /usr/bin/kvm 
-S -M pc-0.11 -enable-kvm -m 512 -smp 1 -name vpa11000 -uuid 
7fd6b400-6ef4-20f4-b1e3-1ecc413ecdf7 -chardev 
socket,id=monitor,path=/var/lib/libvirt/qemu/vpa11000.monitor,server,nowait 
-monitor chardev:monitor -boot c -drive 
file=/var/vm/vpa11000/sda.qcow2,if=scsi,index=0,boot=on,format=qcow2,cache=none 
-net nic,macaddr=52:54:00:03:72:ac,vlan=0,model=virtio,name=virtio.0 -net 
tap,fd=39,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 
-parallel none -usb -vnc 192.168.0.18:5100 -vga std
Lsusb:
 Bus 002 Device 003: ID 413c:2003 Dell Computer Corp. Keyboard
 Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. PowerEdge T105
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-generic 
root=UUID=a5f141c2-ffe1-4084-aea8-0a071c334561 ro quiet splash
ProcEnviron:
 LANG=en_GB.utf8
 SHELL=/bin/bash
SourcePackage: qemu-kvm
dmi.bios.date: 02/01/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.1.0
dmi.board.name: 0RR825
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 7
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvr1.1.0:bd02/01/2008:svnDellInc.:pnPowerEdgeT105:pvr(none):rvnDellInc.:rn0RR825:rvrA00:cvnDellInc.:ct7:cvr:
dmi.product.name: PowerEdge T105
dmi.product.version: (none)
dmi.sys.vendor: Dell Inc.

** Affects: qemu-kvm (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug lucid

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/799166

Title:
  KVM virtual machines crash with host on linux-image-2.6.32-32-server
  on AMD processor

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/799166/+subscriptions

[Bug 799166] Re: KVM virtual machines crash with host on linux-image-2.6.32-32-server on AMD processor

2011-06-18 Thread Seb James

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/799166

Title:
  KVM virtual machines crash with host on linux-image-2.6.32-32-server
  on AMD processor

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/799166/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

Re: [Bug 791944] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread Clint Byrum

Excerpts from datanalytics.com's message of Fri Jun 17 20:04:32 UTC 2011:
 Nothing happens:
 
 carlos@kropotkin:~$ sudo /usr/sbin/nmbd -d 3
 carlos@kropotkin:~$ man nmbd
 
 There is no output at all.
 
 No problem helping uncover a possible bug (if it is).
 

Heh, ok, one more time

sudo /usr/sbin/nmbd -d 3 -F -S

Thanks again!

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/791944

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/791944/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 797798] Re: package clamav-freshclam 0.95.3 dfsg-1ubuntu0.09.10.4 failed to install/upgrade: problemas de dependencias - se deja sin configurar

2011-06-18 Thread Imre Gergely

Configurando clamav-base (0.95.3+dfsg-1ubuntu0.09.10.4) ...
useradd: no se puede bloquear /etc/passwd; inténtelo más tarde.
adduser: `/usr/sbin/useradd -d /var/lib/clamav -g clamav -s /bin/false -u 115 
clamav' devolvió el código de error 1. Saliendo.
dpkg: error al procesar clamav-base (--configure):
 el subproceso script post-installation instalado devolvió el código de salida 
de error 1

It seems like some other process is/was blocking the /etc/passwd file so the 
postinst script of the clamav-base package couldn't create the clamav user, 
thus it gave the error message.
You could try to check what is blocking /etc/passwd with, say:

# lsof |grep passwd

Then terminate this process, and then try reinstalling the clamav-base
package. Maybe you could try a restart of the system and the
reinstalling clamav-base.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to clamav in Ubuntu.
https://bugs.launchpad.net/bugs/797798

Title:
  package clamav-freshclam 0.95.3 dfsg-1ubuntu0.09.10.4 failed to
  install/upgrade: problemas de dependencias - se deja sin configurar

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/797798/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 791944] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread datanalytics.com

I got this:


carlos@kropotkin:datos_econta$ sudo /usr/sbin/nmbd -d 3 -F -S
[sudo] password for carlos: 
nmbd version 3.5.8 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file /etc/samba/smb.conf
Processing section [global]
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file /etc/samba/smb.conf
Processing section [global]
services not loaded
standard input is not a socket, assuming -D option
Becoming a daemon.


Then nothing else (the process does not return control to the console). However,


carlos@kropotkin:datos_econta$ ps -ef | egrep nmbd
root  6609  5986  0 17:48 pts/100:00:00 sudo /usr/sbin/nmbd -d 3 -F -S
root  6612  6609  0 17:48 ?00:00:00 /usr/sbin/nmbd -d 3 -F -S
carlos6722  6660  0 17:52 pts/300:00:00 egrep nmbd


Helpful?

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/791944

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/791944/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

Re: [Bug 791944] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread Clint Byrum

Excerpts from datanalytics.com's message of Sat Jun 18 15:55:02 UTC 2011:
 I got this:
 
 
 carlos@kropotkin:datos_econta$ sudo /usr/sbin/nmbd -d 3 -F -S
 [sudo] password for carlos: 
 nmbd version 3.5.8 started.
 Copyright Andrew Tridgell and the Samba Team 1992-2010
 lp_load_ex: refreshing parameters
 Initialising global parameters
 rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
 params.c:pm_process() - Processing configuration file /etc/samba/smb.conf
 Processing section [global]
 Registered MSG_REQ_POOL_USAGE
 Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
 lp_load_ex: refreshing parameters
 Initialising global parameters
 rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
 params.c:pm_process() - Processing configuration file /etc/samba/smb.conf
 Processing section [global]
 services not loaded
 standard input is not a socket, assuming -D option
 Becoming a daemon.
 
 
 Then nothing else (the process does not return control to the console). 
 However,
 
 
 carlos@kropotkin:datos_econta$ ps -ef | egrep nmbd
 root  6609  5986  0 17:48 pts/100:00:00 sudo /usr/sbin/nmbd -d 3 -F -S
 root  6612  6609  0 17:48 ?00:00:00 /usr/sbin/nmbd -d 3 -F -S
 carlos6722  6660  0 17:52 pts/300:00:00 egrep nmbd
 
 
 Helpful?

Yes very! This leads me to believe the upstart job is broken:

Can you paste

cat /etc/init/nmbd.conf /etc/init/nmbd.override ?

and

cat /var/lib/dpkg/info/samba.postinst

Thanks once again.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/791944

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/791944/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 791944] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread datanalytics.com

carlos@kropotkin:~$ cat /etc/init/nmbd.conf /etc/init/nmbd.override
description NetBIOS name server
author  Steve Langasek steve.langa...@ubuntu.com

start on (local-filesystems and net-device-up IFACE!=lo)
stop on runlevel [!2345]

expect fork
respawn

pre-start script
[ -f /etc/samba/smb.conf ] || { stop; exit 0; }

install -o root -g root -m 755 -d /var/run/samba
NMBD_DISABLED=`testparm -s --parameter-name='disable netbios' 
2/dev/null`

[ x$NMBD_DISABLED = xYes ]  { stop; exit 0; }

exit 0
end script

exec nmbd -D
cat: /etc/init/nmbd.override: No such file or directory


The file samba.postinst is attached to this message (was perhaps too
long).

** Attachment added: samba.postinst
   
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/791944/+attachment/2174352/+files/samba.postinst

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/791944

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/791944/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 776103] Re: package open-vm-dkms 2011.03.28-387002-0ubuntu2 fails to build against 2.6.39 kernels, due to missing linux/smp_lock.h

2011-06-18 Thread Nate Muench

If your virtual system is Debian sid, WHY ARE YOU COMMENTING HERE? This
is an Ubuntu Oneiric bug report.  If you have a issue with Debian, tell
them about it.

Your bug report can be found here: http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=629980

** Bug watch added: Debian Bug tracker #629980
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=629980

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to open-vm-tools in Ubuntu.
https://bugs.launchpad.net/bugs/776103

Title:
  package open-vm-dkms 2011.03.28-387002-0ubuntu2 fails to build against
  2.6.39 kernels, due to missing linux/smp_lock.h

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/open-vm-tools/+bug/776103/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 739297] Re: Please update nmap: stable upstream version is 5.51

2011-06-18 Thread Ilya Barygin

** Bug watch added: Debian Bug tracker #630144
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=630144

** Also affects: nmap (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=630144
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to nmap in Ubuntu.
https://bugs.launchpad.net/bugs/739297

Title:
  Please update nmap: stable upstream version is 5.51

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nmap/+bug/739297/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 644489] Re: constantly changes /dev/disk/by-id/{scsi, wwn}-* LUN symlinks with multipathing

2011-06-18 Thread Peter Petrakis

Excellent, you're still interested. I've got a fix for you to try.
Attached is a custom version of mpath_prio_netapp that should
not generate any more change events for you. Please post
for comparison that this new version returns the same data
as the old one.

move the old mpath_prio_netapp to /sbin/mpath_prio_netapp.old

cp the new one into sbin.

post the results of the following script
(adjust device range accordingly)

for i in sd[a-z]; do /sbin/mpath_prio_netapp.old $i; done

for i in sd[a-z]; do /sbin/mpath_prio_netapp $i; done

Verify that the same values are returned from each run,
and update the bug with your results.

Once you verify that the updated prio checker no longer
generates change events, start up multipathd again and
verify that this continues to be true. Thanks!

** Attachment added: updated netapp prio checker

https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/644489/+attachment/2174493/+files/mpath_prio_netapp

--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/644489

Title:
constantly changes /dev/disk/by-id/{scsi,wwn}-* LUN symlinks with
multipathing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/644489/+subscriptions

--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

Re: [Bug 644489] Re: constantly changes /dev/disk/by-id/{scsi, wwn}-* LUN symlinks with multipathing

2011-06-18 Thread John Morrissey

On Sat, Jun 18, 2011 at 09:00:59PM -, Peter Petrakis wrote:
 Excellent, you're still interested. I've got a fix for you to try.
 Attached is a custom version of mpath_prio_netapp

Would you provide a patch to multipath-tools instead, please? I'd be more
comfortable building a patched binary myself.

john
-- 
John Morrissey  _o/\   __o
j...@horde.net_- \_  /  \   \,
www.horde.net/__(_)/_(_)/\___(_) /_(_)__

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/644489

Title:
  constantly changes /dev/disk/by-id/{scsi,wwn}-* LUN symlinks with
  multipathing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/644489/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799297] [NEW] package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade: dahdi kernel module failed to build

2011-06-18 Thread Vernon Cole

Public bug reported:

Binary package hint: dahdi-linux

failed on upgrade to 11.04 -- so loaded 11.04 from cd, installed
asterisk, failed again.

ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: dahdi-dkms 1:2.3.0.1+dfsg-2ubuntu2
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic i686
Architecture: i386
Date: Sat Jun 18 20:09:51 2011
ErrorMessage: dahdi kernel module failed to build
InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
PackageArchitecture: all
PackageVersion: 1:2.3.0.1+dfsg-2ubuntu2
SourcePackage: dahdi-linux
Title: package dahdi-dkms 1:2.3.0.1+dfsg-2ubuntu2 failed to install/upgrade: 
dahdi kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: dahdi-linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 natty

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to dahdi-linux in Ubuntu.
https://bugs.launchpad.net/bugs/799297

Title:
  package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade:
  dahdi kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dahdi-linux/+bug/799297/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799297] Re: package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade: dahdi kernel module failed to build

2011-06-18 Thread Vernon Cole

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to dahdi-linux in Ubuntu.
https://bugs.launchpad.net/bugs/799297

Title:
  package dahdi-dkms 1:2.3.0.1 dfsg-2ubuntu2 failed to install/upgrade:
  dahdi kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dahdi-linux/+bug/799297/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 793314] Re: package clamav-daemon 0.96.5 dfsg-1ubuntu1.10.04.2 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1

2011-06-18 Thread Alex Nazarov

I am still unable to restart the clamav daemon since reinstalling clamav
on 2011-06-06.

The configuration file clamd.conf was copied from 
/usr/share/doc/clamav-base/examples/ to /etc/clamav/clamd.conf
The command: 
~# /etc/init.d/clamav-daemon start
resulted in a segmentation fault error.

The command: 
~# dpkg-reconfigure ClamAV daemon
gave the following error message: 
Package `daemon' is not installed and no info is available.
Use dpkg --info (= dpkg-deb --info) to examine archive files,
and dpkg --contents (= dpkg-deb --contents) to list their contents.
/usr/sbin/dpkg-reconfigure: daemon is not installed.

I can confirm that the clamav daemon is installed (synaptic package
manager says so) but clamav is unaware of it.

It seems that I've encountered a serious bug.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to clamav in Ubuntu.
https://bugs.launchpad.net/bugs/793314

Title:
  package clamav-daemon 0.96.5 dfsg-1ubuntu1.10.04.2 failed to
  install/upgrade: subprocess new pre-removal script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/793314/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 765367] Re: xinetd fails to parse config files with comments when HUPped

[Expired for xinetd (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xinetd (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to xinetd in Ubuntu.
https://bugs.launchpad.net/bugs/765367

Title:
  xinetd fails to parse config files with comments when HUPped

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xinetd/+bug/765367/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 764094] Re: package samba 2:3.5.8~dfsg-1ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Expired for samba (Ubuntu) because there has been no activity for 60
days.]

** Changed in: samba (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/764094

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/764094/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 764004] Re: package amavisd-new-postfix 1:2.6.5-0ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Expired for amavisd-new (Ubuntu) because there has been no activity for
60 days.]

** Changed in: amavisd-new (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to amavisd-new in Ubuntu.
https://bugs.launchpad.net/bugs/764004

Title:
  package amavisd-new-postfix 1:2.6.5-0ubuntu2 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/amavisd-new/+bug/764004/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 763923] Re: package postfix 2.8.2-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 75

[Expired for postfix (Ubuntu) because there has been no activity for 60
days.]

** Changed in: postfix (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to postfix in Ubuntu.
https://bugs.launchpad.net/bugs/763923

Title:
  package postfix 2.8.2-1ubuntu1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 75

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/763923/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 763467] Re: SIOCGMIIREG errors on e1000e interface

[Expired for keepalived (Ubuntu) because there has been no activity for
60 days.]

** Changed in: keepalived (Ubuntu)
   Status: Incomplete = Expired

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to keepalived in Ubuntu.
https://bugs.launchpad.net/bugs/763467

Title:
  SIOCGMIIREG errors on e1000e interface

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/keepalived/+bug/763467/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799311] [NEW] package bacula-director-mysql 5.0.1-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread jeremy lansman

Public bug reported:

Binary package hint: bacula

heck if I know.. just a banging around for a backup manager, and this
one says it did not install correctly.  Was it an SQL issue?  It seems
to know more than I!!

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: bacula-director-mysql 5.0.1-1ubuntu1
ProcVersionSignature: Ubuntu 2.6.32-30.59-server 2.6.32.29+drm33.13
Uname: Linux 2.6.32-30-server x86_64
Architecture: amd64
Date: Wed Jun 15 23:06:31 2011
ErrorMessage: subprocess installed post-installation script returned error exit 
status 1
SourcePackage: bacula
Title: package bacula-director-mysql 5.0.1-1ubuntu1 failed to install/upgrade: 
subprocess installed post-installation script returned error exit status 1

** Affects: bacula (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package lucid

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to bacula in Ubuntu.
https://bugs.launchpad.net/bugs/799311

Title:
  package bacula-director-mysql 5.0.1-1ubuntu1 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bacula/+bug/799311/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 799311] Re: package bacula-director-mysql 5.0.1-1ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2011-06-18 Thread jeremy lansman

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to bacula in Ubuntu.
https://bugs.launchpad.net/bugs/799311

Title:
  package bacula-director-mysql 5.0.1-1ubuntu1 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bacula/+bug/799311/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

Ubuntu pour arm : ks-umpc102vd

2011-06-18 Thread Stéphane Lestage

Bonjour !

Une collègue a depuis peu un KS-UMPC102VD à processeur ARM et Windows CE.

http://www.kinstone.net/proDetail.asp?MID=170SID=1228
(désolé pour le Flash)

Quel est l'état de l'art en ce qui concerne Linux en général et Ubuntu
en particulier sur ARM ?

Peut-on trouver des logiciels libres pour cette architecture ?
J'aimerais au moins changer de navigateur internet.

Merci et bonne fin de semaine
Stef

-- 
Liste de diffusion ubuntu-fr ubuntu-fr@lists.ubuntu.com
Pour s'abonner ou se désabonner : 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Charte de la liste: http://doc.ubuntu-fr.org/groupes/ubuntu-fr-ml/charte

Re: Ubuntu pour arm : ks-umpc102vd

2011-06-18 Thread Olivier Pavilla

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Le 18/06/2011 11:39, Stéphane Lestage a écrit :
 Bonjour !
 
 Une collègue a depuis peu un KS-UMPC102VD à processeur ARM et Windows CE.
 
 http://www.kinstone.net/proDetail.asp?MID=170SID=1228
 (désolé pour le Flash)
 
 Quel est l'état de l'art en ce qui concerne Linux en général et Ubuntu
 en particulier sur ARM ?
 
 Peut-on trouver des logiciels libres pour cette architecture ?
 J'aimerais au moins changer de navigateur internet.
 
 Merci et bonne fin de semaine
 Stef
 


Aucun espoir de mettre une ubuntu sur cette machine à 150 euros. Ce
truc, c'est un pda qui se fait passer pour une netbook.
Je capte pas les gens qui achètent des daubes made in china à 150 euros
en se persuadant qu'ils feront les mêmes choses que fait un véritable
netbook ou un véritable laptop...
kinstone=/=kingston

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJN/HtXAAoJEM7XNMjeLGQfJw0IANtDghFRJZuOvupnMCUdHkeb
OSrM14CLU8MomVPDjOazfEL42WEqePpcStH/ZGtBrnTFa6C2kk5Si6tqi/vTkwH0
u1n26w+ENCUBXwoL0fRVW0gusxwGRcO/j83nqOdKFYOd/5CvgyhfhIQe5Ceh9B5A
tZhZwpNnXCbUEs/htVJhNMgosx/Z3HiiMBWNQXESDaHaJyGhoFZlZ/ODRe6wOEPy
SiqbqQoTR2B/Q1pnVzq9g9cwOMoBH5s488jIEYOq1N4WLbgPXLyvKv7Hm7XaQocC
OdmFmgDb8ILyKvdkQKdv8Tu/VRaCPj2YMeYrjRRS3fk/O3ZMjp+tHIH5vy7lj5M=
=K1aR
-END PGP SIGNATURE-

-- 
Liste de diffusion ubuntu-fr ubuntu-fr@lists.ubuntu.com
Pour s'abonner ou se désabonner : 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Charte de la liste: http://doc.ubuntu-fr.org/groupes/ubuntu-fr-ml/charte

Re: Ubuntu pour arm : ks-umpc102vd

2011-06-18 Thread Steve Nadeau

Boonjour!

il faudrait regarder de ce côté, moi j'ai un téléphone Motorola Atrix et
j'ai installé Ubuntu dedans, c'est un ARM double coeur à 1Ghz et 1Go de
mémoire...

https://wiki.ubuntu.com/ARM/

bonne chance, il faut de la patience... ce n'est pas encore à la portée
du simple utilisateur!

bonne journée!

Steve


El sáb, 18-06-2011 a las 11:39 +0200, Stéphane Lestage escribió:
 Bonjour !
 
 Une collègue a depuis peu un KS-UMPC102VD à processeur ARM et Windows CE.
 
 http://www.kinstone.net/proDetail.asp?MID=170SID=1228
 (désolé pour le Flash)
 
 Quel est l'état de l'art en ce qui concerne Linux en général et Ubuntu
 en particulier sur ARM ?
 
 Peut-on trouver des logiciels libres pour cette architecture ?
 J'aimerais au moins changer de navigateur internet.
 
 Merci et bonne fin de semaine
 Stef
 



-- 
Liste de diffusion ubuntu-fr ubuntu-fr@lists.ubuntu.com
Pour s'abonner ou se désabonner : 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
Charte de la liste: http://doc.ubuntu-fr.org/groupes/ubuntu-fr-ml/charte

[Bug 799145] [NEW] After installing and running sugar-emulator-0.88 the mouse no longer works properly in anything

2011-06-18 Thread James Grabbs

Public bug reported:

Binary package hint: sugar-emulator-0.88

I installed sugar-emulator-0.88 and then after running it my mouse
settings were messed up and I couldn't click on things properly.  I had
to use another computer to find the fix which ended up being to delete
my metacity folders in my home directory.  This got rid of my settings
on the desktop so then I had to reconfigure it.  I would consider this a
serious sugar-emulator-0.88 bug since it messes up ubuntu in general
until a user figures out the fix and erases their metacity settings.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: sugar-emulator-0.88 (not installed)
ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
Uname: Linux 2.6.32-32-generic i686
NonfreeKernelModules: nvidia
Architecture: i386
CheckboxSubmission: 4f5e0808b23e0359dc802165dd93460c
CheckboxSystem: 3f6bed9a1e9ecdbb1382b2e0f5df413a
Date: Sat Jun 18 08:21:21 2011
ProcEnviron:
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: sugar-0.88

** Affects: sugar-0.88 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 lucid

-- 
You received this bug notification because you are a member of Sugar
Team, which is subscribed to sugar-0.88 in Ubuntu.
https://bugs.launchpad.net/bugs/799145

Title:
  After installing and running sugar-emulator-0.88 the mouse no longer
  works properly in anything

Status in “sugar-0.88” package in Ubuntu:
  New

Bug description:
  Binary package hint: sugar-emulator-0.88

  I installed sugar-emulator-0.88 and then after running it my mouse
  settings were messed up and I couldn't click on things properly.  I
  had to use another computer to find the fix which ended up being to
  delete my metacity folders in my home directory.  This got rid of my
  settings on the desktop so then I had to reconfigure it.  I would
  consider this a serious sugar-emulator-0.88 bug since it messes up
  ubuntu in general until a user figures out the fix and erases their
  metacity settings.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: sugar-emulator-0.88 (not installed)
  ProcVersionSignature: Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16
  Uname: Linux 2.6.32-32-generic i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  CheckboxSubmission: 4f5e0808b23e0359dc802165dd93460c
  CheckboxSystem: 3f6bed9a1e9ecdbb1382b2e0f5df413a
  Date: Sat Jun 18 08:21:21 2011
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: sugar-0.88

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sugar-0.88/+bug/799145/+subscriptions

-- 
Ubuntu-sugarteam mailing list
Ubuntu-sugarteam@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-sugarteam

[Bug 798899] Re: controls design bar doesn appear when i chose it

2011-06-18 Thread Christopher M. Penalver

marzini david izaguirre molina, thank you for reporting this bug and
helping make Ubuntu better. This issue was unreproducible in LibreOffice
Base as the Design of Controls Toolbar option was not found. What
specific steps does one take to get to the option that demonstrates this
problem?

** Changed in: libreoffice (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/798899

Title:
  controls design bar doesn appear when i chose it

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/798899/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 797467] Re: When I stop my mini HP the screen is frozen and show a text without no stopping. it stop only when i push the button for many seconds

2011-06-18 Thread Fabio Marconi

** Changed in: linux (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/797467

Title:
  When I stop my mini HP the screen is frozen and show a text without no
  stopping. it stop only when i push the button for many seconds

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/797467/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787946] Re: [Qt] Unity ignores application's attempt to disable menu item.

** Summary changed:

- Unity ignores application's attempt to disable menu item.
+ [Qt] Unity ignores application's attempt to disable menu item.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787946

Title:
  [Qt] Unity ignores application's attempt to disable menu item.

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/787946/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787940] Re: Unity looses cursor position regularly

Could you kindly upload a screenshot of the issue so that we could
understand the problem? Right now we aren't able to understand the
issue. Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787940

Title:
  Unity looses cursor position regularly

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/787940/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 776103] Re: package open-vm-dkms 2011.03.28-387002-0ubuntu2 fails to build against 2.6.39 kernels, due to missing linux/smp_lock.h

2011-06-18 Thread dj_palindrome

Nate, I believe you are on the right track.

I know this is not the type of feedback you need (or want) in this
venue. After all, my virtual platform is Debian Sid, not Oneiric; and my
kernel is 2.6.39-2, not 3.0-rcx. But the underlying problems seem to
be from the same causes.

And I know all the dire warnings about installing Ubuntu binaries on
Debian, or the reverse. But one of the reasons I virtualize non-
production environments is so that I *can* screw them up ;-)

But the great news is that DKMS *finally* doesn't croak:


# dpkg -i *.deb

Selecting previously deselected package open-vm-dkms.

(Reading database ... 332857 files and directories currently installed.)
Unpacking open-vm-dkms (from open-vm-dkms_2011.05.27-420096-0~ppa9_all.deb) ...
dpkg: warning: downgrading open-vm-source from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-source 1:8.4.2-261024-1 (using 
open-vm-source_2011.05.27-420096-0~ppa9_all.deb) ...
Unpacking replacement open-vm-source ...
dpkg: warning: downgrading open-vm-toolbox from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-toolbox 1:8.4.2-261024-1 (using 
open-vm-toolbox_2011.05.27-420096-0~ppa9_amd64.deb) ...
Unpacking replacement open-vm-toolbox ...
dpkg: warning: downgrading open-vm-tools from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-tools 1:8.4.2-261024-1 (using 
open-vm-tools_2011.05.27-420096-0~ppa9_amd64.deb) ...
Stopping open-vm guest daemon: vmtoolsd.
Removing open-vm-tools modules: vmhgfs
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
 vmmemctl
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
FATAL: Module vmmemctl not found.
 vmsync
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be 
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-firewire, it 
will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-extra, it will 
be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-amd76-edac, it 
will be ignored in a future release.
.
Unpacking replacement open-vm-tools ...
dpkg: warning: downgrading open-vm-tools-dbg from 1:8.4.2-261024-1 to 
2011.05.27-420096-0~ppa9.
Preparing to replace open-vm-tools-dbg 1:8.4.2-261024-1 (using 
open-vm-tools-dbg_2011.05.27-420096-0~ppa9_amd64.deb) ...
Unpacking replacement open-vm-tools-dbg ...
Setting up open-vm-dkms (2011.05.27-420096-0~ppa9) ...
Loading new open-vm-tools-2011.05.27 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.39-2-amd64
Building for architecture amd64
Building initial module for 2.6.39-2-amd64
Done.

vmblock.ko:
Running module version sanity check.

Error! Module version 1.1.2.0 for vmblock.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.1.2.0).
You may override by specifying --force.

vmci.ko:
Running module version sanity check.

Good news! Module version 9.2.0.0 for vmci.ko
exactly matches what is already found in kernel 2.6.39-2-amd64.
DKMS will not replace this module.
You may override by specifying --force.

vmhgfs.ko:
Running module version sanity check.

Error! Module version 1.4.1.1 for vmhgfs.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.4.1.1).
You may override by specifying --force.

vmsync.ko:
Running module version sanity check.

Error! Module version 1.1.0.1 for vmsync.ko
is not newer than what is already found in kernel 2.6.39-2-amd64 (1.1.0.1).
You may override by specifying --force.

vmxnet.ko:
Running module version sanity check.

Good news! Module version 2.0.9.0 for vmxnet.ko
exactly matches what is already found in kernel 2.6.39-2-amd64.
DKMS will not replace this module.
You may override by specifying --force.

vsock.ko:
Running module version sanity check.

Good

[Bug 323615] Re: Ekiga stuck on standby

2011-06-18 Thread Yuri

Now I see the same behavior with version 3.2.7
On both FreeBSD and Ubuntu ekiga gets into standby mode and I can't make calls.

My suggestion: it should elaborate on this status, explain why standby
is activated.

** Attachment added: ekiga session log when it got into standby mode
   
https://bugs.launchpad.net/ubuntu/+source/ekiga/+bug/323615/+attachment/2173720/+files/ekiga.log

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/323615

Title:
  Ekiga stuck on standby

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ekiga/+bug/323615/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 797467] Re: When I stop my mini HP the screen is frozen and show a text without no stopping. it stop only when i push the button for many seconds

2011-06-18 Thread Brad Figg

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/797467

Title:
  When I stop my mini HP the screen is frozen and show a text without no
  stopping. it stop only when i push the button for many seconds

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/797467/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787974] Re: Update broke unity

Thank you for taking the time to report this bug and helping to make Ubuntu 
better. Please execute the following command, as it will automatically gather 
debugging information, in a terminal:
apport-collect BUGNUMBER
When reporting bugs in the future please use apport by using 'ubuntu-bug' and 
the name of the package affected. You can learn more about this functionality 
at https://wiki.ubuntu.com/ReportingBugs.

** Changed in: unity
   Status: New = Incomplete

** Changed in: unity (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787974

Title:
  Update broke unity

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/787974/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787947] Re: Unity tiling wierdness after dragging window to left or right edge of screen, then dragging verticaly

The orange box that comes when one drags a window to the right, is
buggy. This bug is for that. As for the windows not snapping correctly,
I can't reproduce it.

** Changed in: unity
   Status: New = Confirmed

** Changed in: unity (Ubuntu)
   Status: New = Confirmed

** Description changed:

  Binary package hint: unity
  
  Reproduce:
  
  1. Drag window to right side of screen
  2. While dragging now drag up or down
  3. The orange feedback box moves up or down in some odd function dependent 
on how far you move it
- 4. Big bad one: if you release after you drag the screen to a certain 
threshold, it doesn't tile at all, instead it just sits close to the edge of 
the screen.
+ 4. Big bad one: if you release after you drag the screen to a certain 
threshold, it doesn't tile at all, instead it just sits close to the edge of 
the screen. (Only reproducible in Evolution, Bilal wasn't able to reproduce 
this).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787947

Title:
  Unity tiling wierdness after dragging window to left or right edge of
  screen, then dragging verticaly

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/787947/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787946] Re: [Qt] Unity ignores application's attempt to disable menu item.

I managed to reproduce this one successfully. The appmenu in Unity
doesn't update itself when a menuitem is disabled.

** Changed in: unity
   Status: New = Confirmed

** Changed in: unity (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787946

Title:
  [Qt] Unity ignores application's attempt to disable menu item.

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/787946/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 763904] Re: System Settings window won't close.

** Changed in: unity
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/763904

Title:
  System Settings  window won't close.

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/763904/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 757017] Re: one too many items displayed in collapsed lens category

** Changed in: unity
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757017

Title:
  one too many items displayed in collapsed lens category

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/757017/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 756300] Re: Lens Search Text Field Sends Mouse Clicks Thru

** Changed in: unity
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/756300

Title:
  Lens Search Text Field Sends Mouse Clicks Thru

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/756300/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 735120] Re: print screen key no longer works in unity

** Changed in: unity
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/735120

Title:
  print screen key no longer works in unity

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/735120/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 539851] Re: [drm:radeon_dvi_detect] ERROR HDMI Type A-1: probed a monitor but no|invalid EDID

2011-06-18 Thread gear3895

Sudden black screen appeared a few times just before and a few times just after 
login screen(Flashing Blinking Flickering)... but once pass that, everything 
was good.
This happened for Ubuntu 10.04 and 11.04 on my M2A-VM mainboard, but not for 
Ubuntu 9.04. (All are 32bits)
 
When pressing Ctrl+Alt+Backspace, I saw these messages overflowing everywhere 
at command lines...
[drm:radeon_dvi_detect] *ERROR* HDMI A-1: probed a monitor but no|invalid EDID
[drm:drm_edid_block_valid] *ERROR* RAW EDID 

THE SOLUTION!!!
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/575985
$ gksu gedit /etc/default/grub
Add nomodeset into /etc/default/grub -- GRUB_CMDLINE_LINUX=nomodeset
$ sudo update-grub
then reboot

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/539851

Title:
  [drm:radeon_dvi_detect] *ERROR* HDMI Type A-1: probed a monitor but
  no|invalid EDID

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/539851/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787979] Re: Opening file without closing Dash

Not a bad idea. Marking needs-design.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/787979

Title:
  Opening file without closing Dash

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/787979/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 787979] Re: Opening file without closing Dash