[Bug 110992] Re: ipmi modules need to manually inserted and device created
Ok... so further investigation: Fresh Natty install on an IBM server with BMC using the latest ISOs as of 8 March. Looking in /lib/modules/2.6.38-5-generic/kernel/drivers/char/ipmi/ shows that the drivers are present. No IPMI packages are installed: First I install ipmitool: ubuntu@ubuntu:~$ sudo apt-get install ipmitool Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: openipmi The following NEW packages will be installed: ipmitool 0 upgraded, 1 newly installed, 0 to remove and 13 not upgraded. Need to get 418 kB of archives. After this operation, 1,118 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ natty/universe ipmitool amd64 1.8.11-2ubuntu3 [418 kB] Fetched 418 kB in 0s (431 kB/s) ySelecting previously deselected package ipmitool. (Reading database ... 30797 files and directories currently installed.) Unpacking ipmitool (from .../ipmitool_1.8.11-2ubuntu3_amd64.deb) ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for man-db ... Setting up ipmitool (1.8.11-2ubuntu3) ... ipmievd: using pidfile /var/run/ipmievd.pid0 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Unable to open interface invoke-rc.d: initscript ipmievd, action "start" failed. Unable to start ipmievd during installation. Trying to disable. Also note that installing ipmitool does not install any other packages at all. These errors happened because /dev/ipmi0 is not created... that requires ipmi_devmntf to be loaded. One would think that since I just installed ipmitool, which includes ipmievd to pass BMC messages on to syslog, that as soon as I reboot, the modules would be loaded, /dev/ipmi0 would be created and everthing would be copacetic. So after installing ipmitool and verifying that ipmievd was not running, /dev/ipmi0 was not there, and the modules were not loaded, I rebooted the server to see what would happen. ipmi modules are NOT loaded, ipmievd is not started, and /dev/ipmi0 is not created, thus, nothing. Now I install the openipmi package (which is NOT pulled in by installing ipmitool): ubuntu@ubuntu:~$ sudo apt-get install openipmi Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libopenipmi0 libperl5.10 libsensors4 libsnmp-base libsnmp15 Suggested packages: lm-sensors snmp-mibs-downloader The following NEW packages will be installed: libopenipmi0 libperl5.10 libsensors4 libsnmp-base libsnmp15 openipmi 0 upgraded, 6 newly installed, 0 to remove and 13 not upgraded. Need to get 2,288 kB of archives. After this operation, 6,595 kB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main libopenipmi0 amd64 2.0.18-0ubuntu3 [559 kB] Get:2 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main libperl5.10 amd64 5.10.1-17ubuntu3 [1,200 B] Get:3 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main libsensors4 amd64 1:3.2.0-1 [32.8 kB] Get:4 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main libsnmp-base all 5.4.3~dfsg-2ubuntu1 [214 kB] Get:5 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main libsnmp15 amd64 5.4.3~dfsg-2ubuntu1 [1,336 kB] Get:6 http://10.189.84.1/enablement/cdimage.ubuntu.com/ubuntu-server/daily/current/natty-server-amd64/ natty/main openipmi amd64 2.0.18-0ubuntu3 [146 kB] Fetched 2,288 kB in 0s (26.5 MB/s) Selecting previously deselected package libopenipmi0. (Reading database ... 30810 files and directories currently installed.) Unpacking libopenipmi0 (from .../libopenipmi0_2.0.18-0ubuntu3_amd64.deb) ... Selecting previously deselected package libperl5.10. Unpacking libperl5.10 (from .../libperl5.10_5.10.1-17ubuntu3_amd64.deb) ... Selecting previously deselected package libsensors4. Unpacking libsensors4 (from .../libsensors4_1%3a3.2.0-1_amd64.deb) ... Selecting previously deselected package libsnmp-base. Unpacking libsnmp-base (from .../libsnmp-base_5.4.3~dfsg-2ubuntu1_all.deb) ... Selecting previously deselected package libsnmp15. Unpacking libsnmp15 (from .../libsnmp15_5.4.3~dfsg-2ubuntu1_amd64.deb) ... Selecting previously deselected package openipmi. Unpacking openipmi (from .../openipmi_2.0.18-0ubuntu3_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up libopenipmi0 (2.0.18-0ubuntu3) ... Setting up libperl5.10 (5.10.1-17ubuntu3) ... Setting up libsensors4 (1:3.2.0-1) ... Setting up libsnmp-base (5.4.3~dfsg-2ubuntu1) ... Setting up libsnmp1
[Bug 110992] Re: ipmi modules need to manually inserted and device created
Also, by "pulling in openipmi" I mean that perhaps the control file for the ipmitool package could change from suggesting openipmi to recommending openipmi -- You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. https://bugs.launchpad.net/bugs/110992 Title: ipmi modules need to manually inserted and device created -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 578930] Re: qemu-kvm: ksmd should have a less CPU-hogging default config
I'm disappointed in Ubuntu's decision not to fix this.. I find the alternative sleep time of 200ms to be far more sensible, rather than having ksmd burn thru CPU cycles constantly. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/578930 Title: qemu-kvm: ksmd should have a less CPU-hogging default config -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731763] [NEW] libldap-2.4-2 does not install
Public bug reported: Binary package hint: bind9 Unable to install the libldap-2.4-2 package for 10.04.2 on amd64 host. Output of attempting to unpack the deb follows. It appears to be a possible typo with a proceeding .(dot) as indicate by this error message "unable to install new version of `./usr/share/doc/libldap-2.4-2': No such file or directory" dpkg --unpack -D10 /var/cache/apt/archives/libldap-2.4-2_2.4.21-0ubuntu5.3_amd64.deb D10: ensure_pathname_nonexisting `/var/lib/dpkg/tmp.ci' (Reading database ... 20771 files and directories currently installed.) Preparing to replace libldap-2.4-2 2.4.21-0ubuntu5.3 (using .../libldap-2.4-2_2.4.21-0ubuntu5.3_amd64.deb) ... Unpacking replacement libldap-2.4-2 ... D10: tarobject ti->Name=`.' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/.' flags=2 instead=`' D10: tarobject ti->Name=`./usr' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/usr' flags=2 instead=`' D10: tarobject ti->Name=`./usr/lib' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/usr/lib' flags=2 instead=`' D10: tarobject ti->Name=`./usr/lib/liblber-2.4.so.2.5.4' Mode=644 owner=0.0 Type=48(-) ti->LinkName=`' namenode=`/usr/lib/liblber-2.4.so.2.5.4' flags=2 instead=`' D10: ensure_pathname_nonexisting `/usr/lib/liblber-2.4.so.2.5.4.dpkg-new' D10: ensure_pathname_nonexisting `/usr/lib/liblber-2.4.so.2.5.4.dpkg-tmp' D10: tarobject ti->Name=`./usr/lib/libldap_r-2.4.so.2.5.4' Mode=644 owner=0.0 Type=48(-) ti->LinkName=`' namenode=`/usr/lib/libldap_r-2.4.so.2.5.4' flags=2 instead=`' D10: ensure_pathname_nonexisting `/usr/lib/libldap_r-2.4.so.2.5.4.dpkg-new' D10: ensure_pathname_nonexisting `/usr/lib/libldap_r-2.4.so.2.5.4.dpkg-tmp' D10: tarobject ti->Name=`./usr/share' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/usr/share' flags=2 instead=`' D10: tarobject ti->Name=`./usr/share/doc' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/usr/share/doc' flags=2 instead=`' D10: tarobject ti->Name=`./usr/share/doc/libldap-2.4-2' Mode=755 owner=0.0 Type=53(d) ti->LinkName=`' namenode=`/usr/share/doc/libldap-2.4-2' flags=2 instead=`' D10: ensure_pathname_nonexisting `/usr/share/doc/libldap-2.4-2.dpkg-new' D10: ensure_pathname_nonexisting `/usr/share/doc/libldap-2.4-2.dpkg-tmp' dpkg: error processing /var/cache/apt/archives/libldap-2.4-2_2.4.21-0ubuntu5.3_amd64.deb (--unpack): unable to install new version of `./usr/share/doc/libldap-2.4-2': No such file or directory D10: cu_installnew `/usr/share/doc/libldap-2.4-2' flags=2 D10: cu_installnew `/usr/lib/libldap_r-2.4.so.2.5.4' flags=602 D10: cu_installnew `/usr/lib/liblber-2.4.so.2.5.4' flags=602 D10: ensure_pathname_nonexisting `/var/lib/dpkg/tmp.ci' D10: ensure_pathname_nonexisting running rm -rf D10: ensure_pathname_nonexisting `/var/lib/dpkg/reassemble.deb' Errors were encountered while processing: /var/cache/apt/archives/libldap-2.4-2_2.4.21-0ubuntu5.3_amd64.deb ** Affects: openldap2 (Ubuntu) Importance: Undecided Status: New ** Package changed: bind9 (Ubuntu) => openldap2 (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openldap2 in ubuntu. https://bugs.launchpad.net/bugs/731763 Title: libldap-2.4-2 does not install -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723840] Re: krb5-1.8 fails to verify MS PAC Checksum when AES 256 is used
** Changed in: krb5 (Debian) Status: Unknown => Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in ubuntu. https://bugs.launchpad.net/bugs/723840 Title: krb5-1.8 fails to verify MS PAC Checksum when AES 256 is used -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
I've also put the very latest upstream qemu-kvm tree up at https://launchpad.net/~ubuntu-server-edgers/+archive/server-edgers-qemu- kvm. If you can reproduce the performance regression with that package, then we can engage upstream. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731616] Re: koan crashed with ImportError in __main__: No module named koan.app
** Changed in: cobbler (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cobbler in ubuntu. https://bugs.launchpad.net/bugs/731616 Title: koan crashed with ImportError in __main__: No module named koan.app -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731732] Re: just keep coming up a problem package eucalyptus-common 2.0.1 bzr1256-0ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731732 Title: just keep coming up a problem package eucalyptus-common 2.0.1 bzr1256-0ubuntu2 failed to install/upgrade: subprocess installed post- installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731732] [NEW] just keep coming up a problem package eucalyptus-common 2.0.1 bzr1256-0ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: love ubuntu ProblemType: Package DistroRelease: Ubuntu 11.04 Package: eucalyptus-common 2.0.1+bzr1256-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-5.32-generic 2.6.38-rc6 Uname: Linux 2.6.38-5-generic i686 Architecture: i386 Date: Tue Mar 8 17:52:03 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta i386 (20100406.1) SourcePackage: eucalyptus Title: package eucalyptus-common 2.0.1+bzr1256-0ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to natty on 2011-03-08 (0 days ago) ** Affects: eucalyptus (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731732 Title: just keep coming up a problem package eucalyptus-common 2.0.1 bzr1256-0ubuntu2 failed to install/upgrade: subprocess installed post- installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731672] Re: missing depends -- python-psutil
** Changed in: eucalyptus (Ubuntu) Status: In Progress => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731672 Title: missing depends -- python-psutil -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731702] [NEW] euca-add-user adds a new disabled user, and there is no visible way to enable it
Public bug reported: eucalyptus 2.0.1+bzr1256-0ubuntu2. euca-add-user adds a new user to the cloud, disabled. But there is no visible way to *enable* this user, either on the web interface or command-line. ** Affects: eucalyptus (Ubuntu) Importance: Undecided Status: New ** Tags: natty qa -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731702 Title: euca-add-user adds a new disabled user, and there is no visible way to enable it -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731672] Re: missing depends -- python-psutil
** Changed in: eucalyptus (Ubuntu) Assignee: (unassigned) => Andres Rodriguez (andreserl) ** Changed in: eucalyptus (Ubuntu) Importance: Undecided => Medium ** Changed in: eucalyptus (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731672 Title: missing depends -- python-psutil -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731672] Re: missing depends -- python-psutil
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731672 Title: missing depends -- python-psutil -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731672] [NEW] missing depends -- python-psutil
Public bug reported: ubuntu@sapodilla:~$ euca-get-credentials cerdea Traceback (most recent call last): File "/usr/sbin/euca-get-credentials", line 2, in import sys, os, boto, psutil, re, getpass ImportError: No module named psutil ubuntu@sapodilla:~$ sudo apt-get install python-psutil Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: python-psutil 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 54.1 kB of archives. After this operation, 221 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ natty/universe python-psutil all 0.1.3-1 [54.1 kB] Fetched 54.1 kB in 0s (1382 kB/s) Selecting previously deselected package python-psutil. (Reading database ... 59366 files and directories currently installed.) Unpacking python-psutil (from .../python-psutil_0.1.3-1_all.deb) ... Setting up python-psutil (0.1.3-1) ... Processing triggers for python-support ... ubuntu@sapodilla:~$ euca-get-credentials cerdea Traceback (most recent call last): File "/usr/sbin/euca-get-credentials", line 3, in from euca_admin import local ImportError: cannot import name local ubuntu@sapodilla:~$ ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: eucalyptus-common 2.0.1+bzr1256-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-5.32-server 2.6.38-rc6 Uname: Linux 2.6.38-5-server x86_64 .etc.eucalyptus.eucalyptus.cc.conf: CC_NAME="UEC-TEST1" Architecture: amd64 Date: Tue Mar 8 18:21:32 2011 ProcEnviron: LC_TIME=en_DK.utf8 LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: eucalyptus UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: eucalyptus (Ubuntu) Importance: Medium Assignee: Andres Rodriguez (andreserl) Status: In Progress ** Tags: amd64 apport-bug natty qa -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/731672 Title: missing depends -- python-psutil -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731572] Re: php5-fpm chokes on missing /var/www
** Changed in: php5 (Debian) Status: Unknown => New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to php5 in ubuntu. https://bugs.launchpad.net/bugs/731572 Title: php5-fpm chokes on missing /var/www -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731572] Re: php5-fpm chokes on missing /var/www
Thanks for the report, that is already known at debian. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601243 ** Bug watch added: Debian Bug tracker #601243 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601243 ** Changed in: php5 (Ubuntu) Importance: Undecided => Low ** Changed in: php5 (Ubuntu) Status: New => Triaged ** Also affects: php5 (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601243 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to php5 in ubuntu. https://bugs.launchpad.net/bugs/731572 Title: php5-fpm chokes on missing /var/www -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 717166] Re: Broken with v4 isc-dhcp-server in Natty
** Changed in: eucalyptus (Ubuntu Natty) Milestone: None => ubuntu-11.04-beta-1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/717166 Title: Broken with v4 isc-dhcp-server in Natty -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 711587] Re: powernap and Eucalyptus seem unable to reach an understanding
Marking Triaged, we know what this is all about now. ** Changed in: eucalyptus (Ubuntu Natty) Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/711587 Title: powernap and Eucalyptus seem unable to reach an understanding -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730259] Re: tomcat6-instance-create does not behave properly on setting a value less than 1024 for the control port
Hi Abhinav You should have received a warning from the tomcat6-create-instance command when using ports below 1024 (see output below): ubuntu@ip-172-19-1-2:~$ tomcat6-instance-create -p 1000 -c 8005 tomcat You are about to create a Tomcat instance in directory 'tomcat' Warning: ports below 1024 are reserved to the super-user. Type to continue, to abort. It is possible for non-root users to bind to ports below 1024 using the authbind package (see man authbind for more details) - the main tomcat6 package has authbind as a dependency and can be configured to run on ports below 1024 if required. I expect a similar approach could be applied to user instances of tomcat6 if required (but not recommended!) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to tomcat6 in ubuntu. https://bugs.launchpad.net/bugs/730259 Title: tomcat6-instance-create does not behave properly on setting a value less than 1024 for the control port -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731620] Re: koan crashed with ImportError in /usr/lib/python2.7/dist-packages/koan/configurator.py: No module named yum
** Visibility changed to: Public ** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cobbler in ubuntu. https://bugs.launchpad.net/bugs/731620 Title: koan crashed with ImportError in /usr/lib/python2.7/dist- packages/koan/configurator.py: No module named yum -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731616] Re: koan crashed with ImportError in __main__: No module named koan.app
** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cobbler in ubuntu. https://bugs.launchpad.net/bugs/731616 Title: koan crashed with ImportError in __main__: No module named koan.app -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 110992] Re: ipmi modules need to manually inserted and device created
** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => Triaged ** Tags added: kernel-key -- You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. https://bugs.launchpad.net/bugs/110992 Title: ipmi modules need to manually inserted and device created -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 110992] Re: ipmi modules need to manually inserted and device created
Why is this still even an issue? Verified that on the latest Lucid SRU, ipmi_si and ipmi_msghandler load at boot but ipmi_devintf does not. -- You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. https://bugs.launchpad.net/bugs/110992 Title: ipmi modules need to manually inserted and device created -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 727114] Re: nmap only recognizes IPv6 resolvers by specifying "--system-dns"
Hi there, Thank you for reporting bugs and trying to make Ubuntu better. The manpage in the --system-dns section mentions the following: "--system-dns (Use system DNS resolver) . [] The system resolver is always used for IPv6 scans." Please, correct me if I'm wrong but this leads me to believe that in fact, when using IPv6 resolvers the "--system-dns" parameter should be specified. I'm marking this bug report as incomplete for now. If you have further information or you believe that this is not the case, please provide further information to help us determine the issue more in depth. Please also note that when doing IPv6 scanning you should use the "-6" parameter. see [1] and the manpage for more information. [1]: http://nmap.org/book/man-misc-options.html ** Changed in: nmap (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nmap in ubuntu. https://bugs.launchpad.net/bugs/727114 Title: nmap only recognizes IPv6 resolvers by specifying "--system-dns" -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730259] Re: tomcat6-instance-create does not behave properly on setting a value less than 1024 for the control port
Hi there, Thank you for reporting bugs and trying to make Ubuntu better. Given that it is a known fact that non-root services cannot run in port higher than 1024, and not being a real issue and rather a usability bug, I believe that this bug report doesn't really affect the functioning of tomcat. Furthermore, as this is a known fact, maybe the logs have displayed the error message you were seeking for. However, It can still be possible to run tomcat in "higher ports". This information can be found at [1]. For this reason, I'm marking this bug as incomplete as it doesn't really affect the functionality of tomcat. [1]: http://wiki.apache.org/tomcat/HowTo#How_to_run_Tomcat_without_root_privileges.3F ** Changed in: tomcat6 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to tomcat6 in ubuntu. https://bugs.launchpad.net/bugs/730259 Title: tomcat6-instance-create does not behave properly on setting a value less than 1024 for the control port -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 659334] Re: rhythmbox crashed with SIGSEGV in _nss_wins_gethostbyname_r()
*** This bug is a duplicate of bug 529714 *** https://bugs.launchpad.net/bugs/529714 ** Bug watch added: GNOME Bug Tracker #644030 https://bugzilla.gnome.org/show_bug.cgi?id=644030 ** Also affects: samba via https://bugzilla.gnome.org/show_bug.cgi?id=644030 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/659334 Title: rhythmbox crashed with SIGSEGV in _nss_wins_gethostbyname_r() -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 724694] Re: package drbd8-source 2:8.3.7-1ubuntu2.1 failed to install/upgrade: drbd8 kernel module failed to build
*** This bug is a duplicate of bug 725359 *** https://bugs.launchpad.net/bugs/725359 ** This bug has been marked a duplicate of bug 725359 package drbd8-source 2:8.3.7-1ubuntu2.1 failed to install/upgrade: drbd8 kernel module failed to build * You can subscribe to bug 725359 by following this link: https://bugs.launchpad.net/ubuntu/+source/drbd8/+bug/725359/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to drbd8 in ubuntu. https://bugs.launchpad.net/bugs/724694 Title: package drbd8-source 2:8.3.7-1ubuntu2.1 failed to install/upgrade: drbd8 kernel module failed to build -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731572] [NEW] php5-fpm chokes on missing /var/www
Public bug reported: Binary package hint: php5-fpm When php5-fpm is installed, it looks for a /var/www directory to generate its configuration. However, php5-fpm is not only used for apache. Other webservers, such as Nginx do not use the /var/www folder as their root. As a result, php5-fpm stops during installation with Setting up php5-fpm (5.3.5-1ubuntu1) ... update-rc.d: warning: php5-fpm stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (none) * Starting PHP5 FPM... Mar 08 20:14:16.908184 [WARNING] [pool www] pm.start_servers is not set. It's been set to 20. Mar 08 20:14:16.908957 [ERROR] [pool www] the chdir path '/var/www' does not exist or is not a directory Mar 08 20:14:16.908969 [ERROR] failed to post process the configuration and the /var/www folder has to be created in order to install php5-fpm. Maybe we can make a dialog or something else to let users choose the directory, or simply create the /var/www folder. ** Affects: php5 (Ubuntu) Importance: Undecided Status: New ** Description changed: Binary package hint: php5-fpm When php5-fpm is installed, it looks for a /var/www directory to generate its configuration. - However, php5-fpm is not only used for apache. Other webservers, such as Nginx do not use the /var/www package as their root. As a result, php5-fpm stops during installation with + However, php5-fpm is not only used for apache. Other webservers, such as Nginx do not use the /var/www folder as their root. As a result, php5-fpm stops during installation with Setting up php5-fpm (5.3.5-1ubuntu1) ... update-rc.d: warning: php5-fpm stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (none) - * Starting PHP5 FPM... Mar 08 20:14:16.908184 [WARNING] [pool www] pm.start_servers is not set. It's been set to 20. + * Starting PHP5 FPM... Mar 08 20:14:16.908184 [WARNING] [pool www] pm.start_servers is not set. It's been set to 20. Mar 08 20:14:16.908957 [ERROR] [pool www] the chdir path '/var/www' does not exist or is not a directory Mar 08 20:14:16.908969 [ERROR] failed to post process the configuration and the /var/www folder has to be created in order to install php5-fpm. Maybe we can make a dialog or something else to let users choose the directory, or simply create the /var/www folder. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to php5 in ubuntu. https://bugs.launchpad.net/bugs/731572 Title: php5-fpm chokes on missing /var/www -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 709188] Re: Samba in Lucid upgrade killed Envelope Feeder on HP LJ4000 printer
Michael Lueck, can you log in on the server and try to print directly from there? Can you use the envelope feeder when printing from the server? Do you have a desktop machine running Linux? If so, can you print from there and see whether the envelope feeder works? ** Changed in: cups (Ubuntu) Status: New => Incomplete ** Also affects: samba (Ubuntu) Importance: Undecided Status: New ** Changed in: samba (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/709188 Title: Samba in Lucid upgrade killed Envelope Feeder on HP LJ4000 printer -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] Re: DHCP Client does not read search domain list
Hi Martin Thank you for reporting bugs and trying to make Ubuntu better. Could you please provide a sample DHCP server configuration to try to be able to reproduce this bug report? Marking as incomplete until information is provided. Thank you! ** Changed in: dhcp3 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731528] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 ** This bug has been marked a duplicate of bug 729288 squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/731528 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731528] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/731528 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731528] [NEW] package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: squid Was using system update, default options. ProblemType: Package DistroRelease: Ubuntu 10.04 Package: squid 2.7.STABLE7-1ubuntu12.2 ProcVersionSignature: Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12 Uname: Linux 2.6.32-28-generic i686 Architecture: i386 Date: Tue Mar 8 09:26:02 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429) SourcePackage: squid Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 ** Affects: squid (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/731528 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 545795] Re: apparmor driver blocks access to some hostdev and pcidev devices
For Lucid: https://launchpad.net/~nutznboltz/+archive/kvm-libvirt-lts -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in ubuntu. https://bugs.launchpad.net/bugs/545795 Title: apparmor driver blocks access to some hostdev and pcidev devices -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
Here are the amd64 debs of a package built on the qemu-kvm 0.14.0 final release. I hope to get this into natty in any case, but could you test to see if this fixes the performance degradation for you? ** Attachment added: "qemu-debs.tgz" https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/723983/+attachment/1894485/+files/qemu-debs.tgz -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 726348] Re: squid's maintainer scripts call start/stop directly instead of using invoke-rc.d
** Changed in: squid (Ubuntu) Status: New => Triaged ** Changed in: squid (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/726348 Title: squid's maintainer scripts call start/stop directly instead of using invoke-rc.d -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] Re: DHCP Client does not read search domain list
(the above is a copy of the dhclient output (after removing the static lease to see if that was the issue) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] Re: DHCP Client does not read search domain list
Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:22:64:bc:63:ec Sending on LPF/eth0/00:22:64:bc:63:ec Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPOFFER of 192.168.254.168 from 192.168.254.234 DHCPREQUEST of 192.168.254.168 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.254.168 from 192.168.254.234 Invalid domain list. Invalid domain list. bound to 192.168.254.168 -- renewal in 3255 seconds. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] Re: DHCP Client does not read search domain list
** Attachment added: "libpcap file of DHCP request" https://bugs.launchpad.net/ubuntu/+source/dhcp3/+bug/731437/+attachment/1894318/+files/dhcp.libpcap ** Description changed: I've recently attempted to setup a new DHCP server, which will provide a list for search domains. - This seems to be sending things correctly - - - 00 22 64 bc 63 ec 5c d9 98 44 89 27 08 00 45 10 ."d.c.\..D.'..E. - 0010 01 ac 00 00 00 00 80 11 ba af c0 a8 fe ea c0 a8 - 0020 fe 45 00 43 00 44 01 98 c3 d1 02 01 06 00 27 d1 .E.C.D'. - 0030 ba 5e 00 00 00 00 00 00 00 00 c0 a8 fe 45 00 00 .^...E.. - 0040 00 00 00 00 00 00 00 22 64 bc 63 ec 00 00 00 00 ..."d.c. - 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 0110 00 00 00 00 00 00 63 82 53 63 35 01 05 36 04 c0 ..c.Sc5..6.. - 0120 a8 fe ea 33 04 00 00 1c 20 01 04 ff ff fe 00 03 ...3 ... - 0130 04 c0 a8 fe ea 0f 16 6f 66 66 69 63 65 2e 6d 6f ...office.mo - 0140 62 69 6c 65 66 75 6e 2e 63 6f 2e 75 6b 06 04 c0 bilefun.co.uk... - 0150 a8 fe ea 77 5c 74 65 73 74 2e 6f 66 66 69 63 65 ...w\test.office - 0160 2e 6d 6f 62 69 6c 65 66 75 6e 2e 63 6f 2e 75 6b .mobilefun.co.uk - 0170 20 6f 66 66 69 63 65 2e 6d 6f 62 69 6c 65 66 75 office.mobilefu - 0180 6e 2e 63 6f 2e 75 6b 20 6d 6f 62 69 6c 65 66 75 n.co.uk mobilefu - 0190 6e 2e 63 6f 2e 75 6b 20 6d 6f 62 69 6c 65 66 75 n.co.uk mobilefu - 01a0 6e 2e 64 65 20 6d 6f 62 69 6c 65 66 75 6e 2e 66 n.de mobilefun.f - 01b0 72 0c 06 74 72 61 6e 63 65 ffr..trance. + This seems to be sending things correctly (libpcap attached) However, it doesn't seem to be saving this to the resolv.conf ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: dhcp3-client 3.1.3-2ubuntu6 ProcVersionSignature: Ubuntu 2.6.35-25.44-generic 2.6.35.10 Uname: Linux 2.6.35-25-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Tue Mar 8 16:36:19 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429) KernLog: - + ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=2b39fba3-d43a-4819-b737-1ceb7ae3401c ro quiet splash ProcEnviron: - PATH=(custom, user) - LANG=en_GB.UTF-8 - SHELL=/bin/zsh + PATH=(custom, user) + LANG=en_GB.UTF-8 + SHELL=/bin/zsh SourcePackage: dhcp3 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] Re: DHCP Client does not read search domain list
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731437] [NEW] DHCP Client does not read search domain list
Public bug reported: I've recently attempted to setup a new DHCP server, which will provide a list for search domains. This seems to be sending things correctly (libpcap attached) However, it doesn't seem to be saving this to the resolv.conf ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: dhcp3-client 3.1.3-2ubuntu6 ProcVersionSignature: Ubuntu 2.6.35-25.44-generic 2.6.35.10 Uname: Linux 2.6.35-25-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Tue Mar 8 16:36:19 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429) KernLog: ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=2b39fba3-d43a-4819-b737-1ceb7ae3401c ro quiet splash ProcEnviron: PATH=(custom, user) LANG=en_GB.UTF-8 SHELL=/bin/zsh SourcePackage: dhcp3 ** Affects: dhcp3 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug maverick ubuntu-une -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dhcp3 in ubuntu. https://bugs.launchpad.net/bugs/731437 Title: DHCP Client does not read search domain list -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 573853] Re: Cannot control squid "Unknown instance"
Thomas, as martin sya please upgrade to latest release. i use squid 2.7.STABLE7-1ubuntu12.2, and i can confirm that this problem is solved. squid running very smooth. Thanks Clint! -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/573853 Title: Cannot control squid "Unknown instance" -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 573853] Re: Cannot control squid "Unknown instance"
Thomas C., the fix for Lucid was already released. You just need to update to version 2.7.STABLE7-1ubuntu12.2 from your current version 2.7.STABLE7-1ubuntu12 as suggested by apt (see Installiert and Kandidat lines). -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/573853 Title: Cannot control squid "Unknown instance" -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 725220] Re: insecure img src in main.html
Marc - I'm curious why you think this isn't a security vulnerability. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nagios3 in ubuntu. https://bugs.launchpad.net/bugs/725220 Title: insecure img src in main.html -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 725220] Re: insecure img src in main.html
Reported upstream. See http://tracker.nagios.org/view.php?id=206 ** Bug watch added: tracker.nagios.org/ #206 http://tracker.nagios.org/view.php?id=206 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nagios3 in ubuntu. https://bugs.launchpad.net/bugs/725220 Title: insecure img src in main.html -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
I'll still finish the 0.14.0 build for the archive, and then go ahead and create a new daily build with which to test. If that still exhibits the problem then we'll involve upstream. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
@Waltc, actually the commits you were hoping for are already in the 0.14.0-rc1 which is currently in natty. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729780] Re: bind9 fails to create pid file.
Hi there, Thank you for taking the time to report bugs and trying to make Ubuntu better. Could you please provide the following information? - Sample configuration files - Could you please provide and step-by-step to be able to reproduce this bug report? - Have you installed bind9 first,t hen made configuration/permission changes after which you saw this error? I've tried to reproduce this bug and I've been unsuccessful. What I did is the following in a fresh Ubuntu install: sudo apt-get install bind9 Mar 8 15:31:20 ubuntu named[2412]: starting BIND 9.7.0-P1 -u bind Mar 8 15:31:20 ubuntu named[2412]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Mar 8 15:31:20 ubuntu named[2412]: adjusted limit on open files from 1024 to 1048576 Mar 8 15:31:20 ubuntu named[2412]: found 2 CPUs, using 2 worker threads Mar 8 15:31:20 ubuntu named[2412]: using up to 4096 sockets Mar 8 15:31:20 ubuntu named[2412]: loading configuration from '/etc/bind/named.conf' Mar 8 15:31:20 ubuntu named[2412]: reading built-in trusted keys from file '/etc/bind/bind.keys' Mar 8 15:31:20 ubuntu named[2412]: using default UDP/IPv4 port range: [1024, 65535] Mar 8 15:31:20 ubuntu named[2412]: using default UDP/IPv6 port range: [1024, 65535] Mar 8 15:31:20 ubuntu named[2412]: listening on IPv6 interfaces, port 53 Mar 8 15:31:20 ubuntu named[2412]: listening on IPv4 interface lo, 127.0.0.1#53 Mar 8 15:31:20 ubuntu named[2412]: listening on IPv4 interface eth0, 192.168.122.138#53 Mar 8 15:31:20 ubuntu named[2412]: generating session key for dynamic DNS Mar 8 15:31:20 ubuntu named[2412]: automatic empty zone: 254.169.IN-ADDR.ARPA Mar 8 15:31:20 ubuntu named[2412]: automatic empty zone: 2.0.192.IN-ADDR.ARPA Mar 8 15:31:20 ubuntu named[2412]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA Note the permissions are not the ones you mention. Additionally, files under /var/run are whipped out whenever the machine boots up and each service creates new files after the boot up process. The wrong permissions/ownership you have seen might be from a wrong configuration file. ubuntu@ubuntu:~/debian$ ls -l /var/run/named/ total 8 -rw-r--r-- 1 bind bind 5 2011-03-08 15:31 named.pid -rw--- 1 bind bind 102 2011-03-08 15:31 session.key ubuntu@ubuntu:~/debian$ ls -l /var/run/ total 36 [..] drwxrwxr-x 2 root bind 80 2011-03-08 15:31 named [..] I'm marking this bug report as incomplete until further information is provided. ** Changed in: bind9 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in ubuntu. https://bugs.launchpad.net/bugs/729780 Title: bind9 fails to create pid file. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
** Branch linked: lp:~serge-hallyn/ubuntu/natty/qemu- kvm/merge-0.14.0-final -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 728879] Re: check_perms -f broke mailman
Hi there, Thank you for taking the time to report bugs and trying to make Ubuntu better. Could you please provide the following: - Provide a sample scenario - Sample Configuration - Step-by-Step to reproduce this error One this information is provided, we would be able to determine the problem better. For now, I'm marking this bug as incomplete. Thank you again! ** Changed in: mailman (Ubuntu) Status: New => Incomplete ** Changed in: mailman (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mailman in ubuntu. https://bugs.launchpad.net/bugs/728879 Title: check_perms -f broke mailman -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730716] Re: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
*** This bug is a duplicate of bug 730713 *** https://bugs.launchpad.net/bugs/730713 ** This bug has been marked a duplicate of bug 730713 package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 * You can subscribe to bug 730713 by following this link: https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/730713/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in ubuntu. https://bugs.launchpad.net/bugs/730716 Title: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731324] Re: apt-get purge exim4 doesn't delete Debian-exim4 account
Hi there, Thank you for reporting bugs and trying to make Ubuntu better. I can confirm that in fact when purging the package the user is not removed, however this has been done for a reason which is explained in Debian bug #270681 ([1]), and as per changelog entry: "Do not remove the Debian-exim user in "exim4-config.postrm purge". Package dependencies are only effective for packages in status installed, but it is clearly not sane to remove the user until all exim4-packages are purged. e.g. this can completely break logrotate (Closes: #270681)." I, however, am leaving this bug report open as maybe a better fix for this can be achieved. [1]: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=270681 ** Bug watch added: Debian Bug tracker #270681 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=270681 ** Changed in: exim4 (Ubuntu) Status: New => Confirmed ** Changed in: exim4 (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to exim4 in ubuntu. https://bugs.launchpad.net/bugs/731324 Title: apt-get purge exim4 doesn't delete Debian-exim4 account -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 727000] Re: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 731310 *** https://bugs.launchpad.net/bugs/731310 ** This bug has been marked a duplicate of bug 731310 package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 731310 by following this link: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/731310/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/727000 Title: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730713] Re: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability ** Tags added: karmic -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in ubuntu. https://bugs.launchpad.net/bugs/730713 Title: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730716] Re: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability ** Tags added: karmic -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in ubuntu. https://bugs.launchpad.net/bugs/730716 Title: package mysql-server-5.1 (not installed) failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730697] Re: package dovecot-common 1:1.2.9-1ubuntu6.3 failed to install/upgrade:
Hi there. Thank you for taking the time to report bugs and trying to make Ubuntu better. Could you please try the following: sudo dpkg-reconfigure dovecot-common One that's done, do: sudo apt-get -f install This should try to reconfigure dovecot-common and once it is done you should be able to install the over dovecot packages. Please let us know the output! Thank you again! ** Changed in: dovecot (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to dovecot in ubuntu. https://bugs.launchpad.net/bugs/730697 Title: package dovecot-common 1:1.2.9-1ubuntu6.3 failed to install/upgrade: -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
opps, What do I do? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 728228] Re: package samba 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability ** Tags added: karmic -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/728228 Title: package samba 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
I have same problem, In cache.log I found it FATAL: Bungled squid.conf line 176: http_reply_access allow all Squid Cache (Version 2.7.STABLE7): Terminated abnormally. https://bugs.launchpad.net/bugs/730041 What do I now? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 628646] Re: package mysql-server-5.1 5.1.41-3ubuntu12.3 failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
Closing this bug report as the issue was generated due to a full disk. If you feel this is incorrect, please re-open this bug report. ** Changed in: mysql-dfsg-5.1 (Ubuntu) Status: Triaged => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in ubuntu. https://bugs.launchpad.net/bugs/628646 Title: package mysql-server-5.1 5.1.41-3ubuntu12.3 failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 726652] Re: package nagios3-common 3.2.0-4ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nagios3 in ubuntu. https://bugs.launchpad.net/bugs/726652 Title: package nagios3-common 3.2.0-4ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 573853] Re: Cannot control squid "Unknown instance"
I also have the problem after reload squid service: apt-cache policy squid squid: Installiert: 2.7.STABLE7-1ubuntu12 Kandidat: 2.7.STABLE7-1ubuntu12.2 Versions-Tabelle: 2.7.STABLE7-1ubuntu12.2 0 500 http://de.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages *** 2.7.STABLE7-1ubuntu12 0 500 http://de.archive.ubuntu.com/ubuntu/ lucid/main Packages 100 /var/lib/dpkg/status pls make a update for lucid too! It is really important issue!! The fix from Comment 38 also works in lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/573853 Title: Cannot control squid "Unknown instance" -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 725220] Re: insecure img src in main.html
Thanks for reporting this issue. This is a change that need to happen with the upstream Nagios project. Could you please file a bug with the upstream Nagios project, and link the bug here. Thanks. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nagios3 in ubuntu. https://bugs.launchpad.net/bugs/725220 Title: insecure img src in main.html -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730674] Re: package mysql-server-5.1 5.1.37-1ubuntu5.1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1
*** This bug is a duplicate of bug 628584 *** https://bugs.launchpad.net/bugs/628584 ** This bug has been marked a duplicate of bug 628584 package mysql-server-5.1 5.1.37-1ubuntu5.1 failed to install/upgrade: sub-process new script pre-removal gives exit code 1 * You can subscribe to bug 628584 by following this link: https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/628584/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in ubuntu. https://bugs.launchpad.net/bugs/730674 Title: package mysql-server-5.1 5.1.37-1ubuntu5.1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 724694] Re: package drbd8-source 2:8.3.7-1ubuntu2.1 failed to install/upgrade: drbd8 kernel module failed to build
Thanks for taking the time to report this bug and helping to make Ubuntu better. We appreciate the difficulties you are facing, but this appears to be a "regular" (non-security) bug. I have unmarked it as a security issue since this bug does not show evidence of allowing attackers to cross privilege boundaries nor directly cause loss of data/privacy. Please feel free to report any other bugs you may find. ** Visibility changed to: Public ** This bug is no longer flagged as a security vulnerability -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to drbd8 in ubuntu. https://bugs.launchpad.net/bugs/724694 Title: package drbd8-source 2:8.3.7-1ubuntu2.1 failed to install/upgrade: drbd8 kernel module failed to build -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731310] Re: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Hi there! Thank you for taking the time to report bugs and trying to make Ubuntu better. Could you please try the following: sudo dpkg --configure -a or sudo dpkg --configure samba-common && sudo dpkg --configure -a This will try to configure the samba-common package that is preventing the rest of the packages to configure. This command should try to configure and should do it successfully, otherwise it will fail with a better description of the issue. Thank you! ** Changed in: samba (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/731310 Title: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729517] Re: Installation failed (Paketoperation fehlgeschlagen)
Hello Christian, thank you for taking the time to file this bug report and help us make Ubuntu better. It would appear that you have configured squid to use a user that does not exist. By default, squid will run as 'proxy' with group 'proxy', but if you have set cache_effective_user or cache_effective_group to something else (squid:squid seems to be what you selected above), then it will try to modify the permissions to match that. Can you confirm that there is no user or group named 'squid' on the system? Marking Incomplete pending response from Christian. ** Changed in: squid (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729517 Title: Installation failed (Paketoperation fehlgeschlagen) -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723983] Re: virtio-net performance in 10Gbs lan
Thanks, Waltc. I'll put together a package today based on the final qemu-kvm-0.14 for you to test, just to make sure. Note that we won't be able to put 0.14 into maverick, but if we can choose a few commits to cherrypick, that would be do-able. If you're just as well off using natty, that'll be much simpler. ** Changed in: qemu-kvm (Ubuntu) Status: Incomplete => In Progress ** Changed in: qemu-kvm (Ubuntu) Importance: Undecided => Low ** Changed in: qemu-kvm (Ubuntu) Assignee: (unassigned) => Serge Hallyn (serge-hallyn) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/723983 Title: virtio-net performance in 10Gbs lan -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731324] [NEW] apt-get purge exim4 doesn't delete Debian-exim4 account
Public bug reported: Binary package hint: exim4 I was uninstalling the exim4 package using command: apt-get purge exim4 exim4-base exim4-config exim4-daemon-light I expected the Debian-exim account and group to be automatically deleted, but it is not the case. Apparently there is no error message. I am using Ubuntu 10.04.2 LTS. ** Affects: exim4 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to exim4 in ubuntu. https://bugs.launchpad.net/bugs/731324 Title: apt-get purge exim4 doesn't delete Debian-exim4 account -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
Oops, I meant bug #726348 , not bug #736348 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729513] Re: package squid (not installed) failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 ** This bug has been marked a duplicate of bug 729288 squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729513 Title: package squid (not installed) failed to install/upgrade: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
For all affected parties, while we figure out what has caused this exactly, if you could possibly provide your /etc/squid/squid.conf , and the logs from /var/log/squid/cache.log and the output of 'grep init: /var/log/daemon.log', that would be extremely helpful in debugging the issue. Please be careful when uploading these, as this is a public bug report, and those files all may have sensitive information. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731310] Re: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/731310 Title: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 731310] [NEW] package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: samba dont know why it reported this but it said it could not upgrade samba ProblemType: Package Architecture: amd64 Date: Wed Mar 2 18:18:20 2011 DistroRelease: Ubuntu 9.10 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release amd64 (20091027) NonfreeKernelModules: nvidia Package: samba-common 2:3.4.0-3ubuntu5.8 PackageArchitecture: all ProcVersionSignature: Ubuntu 2.6.31-23.74-generic SourcePackage: samba Title: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Uname: Linux 2.6.31-23-generic x86_64 ** Affects: samba (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in ubuntu. https://bugs.launchpad.net/bugs/731310 Title: package samba-common 2:3.4.0-3ubuntu5.8 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 726348] Re: squid's maintainer scripts call start/stop directly instead of using invoke-rc.d
** Branch linked: lp:~clint-fewbar/ubuntu/natty/squid/postinst-using- invoke-rc.d -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/726348 Title: squid's maintainer scripts call start/stop directly instead of using invoke-rc.d -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
I've been unable to reproduce this, but there are a ton of duplicates so there is no doubt that there is something wrong with the lucid updates. I actually think this is directly related to bug #736348 . By calling 'restart' directly, we are not re-loading the new job file. So until the system is rebooted, squid will still be run with 'expect fork' and without -N. I am suspicious that this is just exposing *more* issues with the way that squid forks, since the bug we were originally trying to fix involves how squid handles SIGHUP, its conceivable that it handles SIGTERM in a way that is incompatible w/ upstart's expect fork as well. I'm not ready to mark this as a duplicate of that bug, but I think it may be. I'm hoping somebody can provide us with some more information regarding the state of their system *before* the upgrade, that may suggest what state causes the restart to fail. In the mean time, it makes sense to get that fix into natty for testing, especially as people start to try natty out as it approaches beta. It also seems at least one person has hit upstart bug #406397 , which also suggests further that this is caused by mixing expect fork with daemons that don't fork in the way upstart suggests. Unfortunately that is a particularly nasty bug whose only workaround is to make a program that forks until the pid that has gone missing can be recreated. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730041] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 ** This bug has been marked a duplicate of bug 729288 squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/730041 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: sub- processo script post-installation instalado retornou estado de saída de erro 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729694] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 ** This bug has been marked a duplicate of bug 729288 squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729694 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 721801] Re: llseek bug in amd64 host
** Changed in: qemu-linaro Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in ubuntu. https://bugs.launchpad.net/bugs/721801 Title: llseek bug in amd64 host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 720638] Re: snmpd crashes with segfault (libnetsnmpmibs.so.15.1.2)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2011-03-07 15:01, Chuck Short wrote: > Thank you for taking the time to report this bug and helping to make > Ubuntu better. Please try to obtain a backtrace following the > instructions at http://wiki.ubuntu.com/DebuggingProgramCrash and upload I have followed the instructions. Until now, snmpd has crashed only ones. Do I have to wait for a crash again before sending in an backtrace? > the backtrace (as an attachment) to the bug report. This will greatly > help us in tracking down your problem. > - -- Met vriendelijke groeten, Roel Hoek ICT Service Centre University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands Telephone +31 53 489 4598, Fax +31 53 489 2383 r.h.h...@utwente.nl; http://www.utwente.nl/icts -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk12GtUACgkQJwlRSGnYBcY1RgCfT06hvgFfGDFniywLKXDZ1oTV a6YAniRS9k0xsvjPweo1LyaHexh4LIiL =roZM -END PGP SIGNATURE- -- You received this bug notification because you are a member of Ubuntu Server Team, which is a direct subscriber. https://bugs.launchpad.net/bugs/720638 Title: snmpd crashes with segfault (libnetsnmpmibs.so.15.1.2) -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 713002] Re: Impossible to disable IPv4
** Tags added: verification-done ** Tags removed: verification-needed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. https://bugs.launchpad.net/bugs/713002 Title: Impossible to disable IPv4 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 713002] Re: Impossible to disable IPv4
new version in hardy-proposed 1:4.7p1-8ubuntu3 also works FINE. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. https://bugs.launchpad.net/bugs/713002 Title: Impossible to disable IPv4 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2
** Summary changed: - package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 + squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: squid failed to restart after update to squid 2.7.STABLE7-1ubuntu12.2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729687] Re: package squid 2.7.STABLE7-1ubuntu12.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #729288, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 729288 package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729687 Title: package squid 2.7.STABLE7-1ubuntu12.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729844] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #729288, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 729288 package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729844 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 728018] Re: 10.04 LTS: Failure to start instance due to network address failure
The only work around for the problem seems to be to terminate instances and then try again. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to eucalyptus in ubuntu. https://bugs.launchpad.net/bugs/728018 Title: 10.04 LTS: Failure to start instance due to network address failure -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729911] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #729288, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 729288 package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729911 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730375] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #729288, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 729288 package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/730375 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730995] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 729288 *** https://bugs.launchpad.net/bugs/729288 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #729288, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 729288 package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 * You can subscribe to bug 729288 by following this link: https://bugs.launchpad.net/ubuntu/+source/squid/+bug/729288/+subscribe -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/730995 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730703] Re: tomcat6-common missing core libraries
This bug report is being closed due to your last comment regarding this being fixed by re-installing the package. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. ** Changed in: tomcat6 (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to tomcat6 in ubuntu. https://bugs.launchpad.net/bugs/730703 Title: tomcat6-common missing core libraries -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 730703] Re: tomcat6-common missing core libraries
Thanks a lot, this fixed the problem. It was probably my own fault - having deleted the tomcat folder accidentially and only reinstallung the tomcat6-common packge. Sorry for not reinstalling the dependency on my own. Jan ** Changed in: tomcat6 (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to tomcat6 in ubuntu. https://bugs.launchpad.net/bugs/730703 Title: tomcat6-common missing core libraries -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 729288] Re: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
As others have reported this same situation, it seems like a bug which can be confirmed. I believe Clint is currently try to triage this. Thanks. ** Changed in: squid (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to squid in ubuntu. https://bugs.launchpad.net/bugs/729288 Title: package squid 2.7.STABLE7-1ubuntu12.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 713002] Re: Impossible to disable IPv4
Accepted openssh into hardy-proposed, the package will build now and be available in a few hours. Please test and give feedback here. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you in advance! ** Tags removed: verification-failed ** Tags added: verification-needed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in ubuntu. https://bugs.launchpad.net/bugs/713002 Title: Impossible to disable IPv4 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 677764] Re: vsftpd postinstall checks for user/group starting with ftp
** Tags added: verification-done ** Tags removed: verification-needed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to vsftpd in ubuntu. https://bugs.launchpad.net/bugs/677764 Title: vsftpd postinstall checks for user/group starting with ftp -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 611177] Re: samba as pdc, w2k3 as memberserver, winxp domainclients
I am attaching some stuff, which should be done in the description:
https://wiki.ubuntu.com/DebuggingSamba#samba-server
dpkg-query -W -f='${Package} ${Version} ${Source} ${Status}\n' | grep samba
gadmin-samba 0.2.8-1 deinstall ok config-files
libwbclient0 2:3.4.7~dfsg-1ubuntu3 samba install ok installed
samba 2:3.4.7~dfsg-1ubuntu3 install ok installed
samba-common 2:3.4.7~dfsg-1ubuntu3 samba install ok installed
samba-common-bin 2:3.4.7~dfsg-1ubuntu3 samba install ok installed
samba-doc 2:3.4.7~dfsg-1ubuntu3 samba install ok installed
samba-tools 2:3.4.7~dfsg-1ubuntu3 samba install ok installed
swat 2:3.4.7~dfsg-1ubuntu3 samba deinstall ok config-files
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.
https://bugs.launchpad.net/bugs/611177
Title:
samba as pdc, w2k3 as memberserver, winxp domainclients
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
