Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
I've got a Pi Zero W and I wondered if there's a way of configuring wifi directly on the SD card prior to insertion into the Pi? Thanks. http://picoreplayer.sourceforge.net/how_to_setup_wifi_on_pcp_without_ethernet.shtml -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
zswap (Compressed Ram Disk using zram kernel module and lz4 compression) is enabled by default. But a swapfile is disabled by default. If you Ok, didn't know. I did find some discussion around the topic where someone suggested removing nozswap. But I didn't know you did this by default in 3.20. want to enable a swapfile, you need to remove "noswap" from cmdline.txt on mmcblk0p1.(Can be modified using the bootcodes web page) No need so far. The scan has succeeded twice today. I'm optimistic :-) -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
I've got a Pi Zero W and I wondered if there's a way of configuring wifi directly on the SD card prior to insertion into the Pi? Thanks. badboygolf16v's Profile: http://forums.slimdevices.com/member.php?userid=19486 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
mherger wrote: > > One question: I decided to set the db memory parameter to "Maximum", > expecting the little device to crash during the scan. But it run just > fine. zswap seems to be enabled by default now? Or rather not disabled. > Because I can't find any trace of it on my Pi. zswap (Compressed Ram Disk using zram kernel module and lz4 compression) is enabled by default. But a swapfile is disabled by default. If you want to enable a swapfile, you need to remove "noswap" from cmdline.txt on mmcblk0p1.(Can be modified using the bootcodes web page) paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
JadeMonkee wrote: > I upgraded to PCP 3.20 (audio version) today from 3.11, removing the SD, > flashing it in my PC, and setting up from scratch again. > I have a RPI2 with IQAudio DAC+ and a official 7" touch screen (original > version without dimming). > I have the screensaver set to 'Display off' when the player is off. > This used to turn the screen and backlight off, but as of the upgrade, > the backlight remains on, even though the screen is black. > Any idea what's changed? > Thanks. > There is something going on with a jivelite dependency, seems to be a result of the upgrade from 3.11 to 3.20. I just haven't had time to track it down. Thanks for reporting paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
sbp wrote: > I'm sorry for all your trouble. > what kind of RPi are you using? > > You could try to select "beta" mode from the main page in the bottom of > the screen. And then go back to the squeezelite page. > Steen The beta mode has finally shown all entires of the list. The advanced has only shown a small list. I have a RPi 1 Rev2 (with the P5 Header) Thanks for helping me Ice icebreaker's Profile: http://forums.slimdevices.com/member.php?userid=66875 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS won't access \media folder
DJanGo wrote: > > STOP> Code: > > sudo chown -R username:groupname > > !!! > ' > http://wiki.slimdevices.com/index.php/Debian_Package#Users_and_Groups' > (http://wiki.slimdevices.com/index.php/Debian_Package#Users_and_Groups) Sorry your quite right . I will correct it Logitech Media Server Version: 7.9.1 - 1491339164 @ Wed Apr 5 04:19:41 UTC 2017 Operating system: Debian - EN - utf8Platform Architecture: x86_64-linux Perl Version: 5.22.1 - x86_64-linux-gnu-thread-multi Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1) One SB Touch connected by Ethernet - Denon AVR -1912 Receiver, Paradigm 4.1 speakers Two SB Radios wireless SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165 View this thread: http://forums.slimdevices.com/showthread.php?t=107397 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
I upgraded to PCP 3.20 (audio version) today from 3.11, removing the SD, flashing it in my PC, and setting up from scratch again. I have a RPI2 with IQAudio DAC+ and a official 7" touch screen (original version without dimming). I have the screensaver set to 'Display off' when the player is off. This used to turn the screen and backlight off, but as of the upgrade, the backlight remains on, even though the screen is black. Any idea what's changed? Thanks. 2x squeezebox classics | 2x squeezebox booms | 1x raspberry pi 2 b w/ picoreplayer, iqaudio dac+, 7\" touch screen | orangesqueeze as android controller lms v7.9.1 running as a docker in unraid on a hp microserver gen8 JadeMonkee's Profile: http://forums.slimdevices.com/member.php?userid=20481 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS won't access \media folder
SlimChances wrote: > It is usually a permission issue > Note : change username:username to your own name as used in terminal > > > Code: > > sudo chown -R username:username * && find . -type d -execdir > sudo chmod 775 {} \; && sudo find . -name "*" -type f -exec chmod 644 {} \; > > > > http://forums.slimdevices.com/showthread.php?t=92526&highlight=file+permissions STOP Code: sudo chown -R username:groupname !!! ' http://wiki.slimdevices.com/index.php/Debian_Package#Users_and_Groups' (http://wiki.slimdevices.com/index.php/Debian_Package#Users_and_Groups) DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107397 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
rdmguy wrote: > > Code: > > 12142 squeeze+ 10 -10 457.0m 110.5m 0.0 0.7 0:24.99 S `- squeezelite > > > > This is the line from "top" that goes to 100% cpu for short periods of > time. > > > Code: > > /usr/bin/squeezelite -n Wohnzimmer -m abc -f /var/log/squeezelite.log -d all info -s localhost > > > > The detailed info page on the server webui says: > > > Code: > > File Format: MP3 > Duration: 5:33 > Bitrate: 320kbps CBR > Sample Rate: 44.1 kHz > File Length: 13,393,907 > Location: /Audio/Cafe Americaine/Music From The Sea 50 Beautiful Del Mar Sounds/29 - Stories And Flames (22 P.M. Mix).mp3 > Date Modified: Thursday, December 11, 2014, 4:47 AM > Tag Version: ID3v2.3.0, ID3v1.1 > > > > Thanks for your help! what kind of system is it? is LMS + Squeezelte on the same machine? Using local player plugin? If a special distro, I think you better ask for support at the mantainer, just looking at the command line seems to me nothing is really wrong, curious mac apart. Nice and priority of the process are 'strange' indeed. SB+, Klimo Merlino + Kent Gold, Monitor Audio Studio 20 Gold SE+, Klimo reference and DIS Interconnect. marcoc1712's Profile: http://forums.slimdevices.com/member.php?userid=34842 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS won't access \media folder
It is usually a permission issue Ownership of the folder/files needs may need to be changed. You can try this it has worked for me on new installs: Here's one for anyone struggling with Linux file permissions. It is run from a terminal window in the main folder housing your music collection. Basically it does two things: 1) ensures all folders and files are owned by your user account; 2) makes all directories and files r/w to your account and read only to all others sudo chown -R david:david * && find . -type d -execdir sudo chmod 775 {} \; && sudo find . -name "*" -type f -exec chmod 644 {} \; http://forums.slimdevices.com/showthread.php?t=92526&highlight=file+permissions Logitech Media Server Version: 7.9.1 - 1491339164 @ Wed Apr 5 04:19:41 UTC 2017 Operating system: Debian - EN - utf8Platform Architecture: x86_64-linux Perl Version: 5.22.1 - x86_64-linux-gnu-thread-multi Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1) One SB Touch connected by Ethernet - Denon AVR -1912 Receiver, Paradigm 4.1 speakers Two SB Radios wireless SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165 View this thread: http://forums.slimdevices.com/showthread.php?t=107397 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
marcoc1712 wrote: > wich process raise to 100%? Code: 12142 squeeze+ 10 -10 457.0m 110.5m 0.0 0.7 0:24.99 S `- squeezelite This is the line from "top" that goes to 100% cpu for short periods of time. marcoc1712 wrote: > Could you please post the command line and state the type and format of > the file being played? Code: /usr/bin/squeezelite -n Wohnzimmer -m abc -f /var/log/squeezelite.log -d all info -s localhost The detailed info page on the server webui says: Code: File Format: MP3 Duration: 5:33 Bitrate: 320kbps CBR Sample Rate: 44.1 kHz File Length: 13,393,907 Location: /Audio/Cafe Americaine/Music From The Sea 50 Beautiful Del Mar Sounds/29 - Stories And Flames (22 P.M. Mix).mp3 Date Modified: Thursday, December 11, 2014, 4:47 AM Tag Version: ID3v2.3.0, ID3v1.1 Thanks for your help! rdmguy's Profile: http://forums.slimdevices.com/member.php?userid=66855 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS won't access \media folder
Vansloneker wrote: > I am in the process of setting up a new LMS-machine. Right now testing > Mint 15, planning on Mint 18.1. Everything goes fine, except for one > thing: I can't get LMS to access my music folders! > My Flac partition is mounted on \media\vansloneker\Flac and LMS does not > see anything inside \media. > > I followed the guide on > http://wiki.slimdevices.com/index.php/Debian_Package to add LMS as group > and set permissions, I tried setting permissions on the command line as > well as with the file manager: alas. > > I spent hours on Google and found no way out. > > On my current machine I have mounted my Flac partition on \mnt\flac and > I can't remember if I had problems getting it to find it there. > But having the partition mounted on \media is sort of standard and > easier to access with the file manager that's why I would like it that > way. . . On LMS under Setting/Basic/Media Folder have you entered the new path you are using and most important did you verify the exact spelling of each path word and capitalization? You typed \media\vansloneker\Flac might it actually be flac? Also I use Fedora and it requires a forward / between file names does your OS require backslashes \ ? *iPhone* Media Room: ModWright Platinum Signature Transporter, VTL TL-6.5 Signature Pre-Amp, Ayre MX-R Mono's, VeraStarr 6.4SE 6-channel Amp, Vandersteen Speakers: Quatro Wood Mains, VCC-5 Reference Center, four VSM-1 Signatures, Video: Runco RS 900 CineWide AutoScope 2.35:1, Vandersteen V2W Subwoofer Living Room: Transporter, ADCOM GTP-870HD, Cinepro 3K6SE III Gold, Vandersteen Model 3A Signature, Two 2Wq subs, VCC-2, Two VSM-1 Office: Touch with Vandersteen VSM-1s Kitchen: Touch in-wall mount w/ Thiel Powerpoint 1.2s Bedroom: Squeezebox BOOM Bathroom: Squeezebox Radio Around the House: SliMP3, SB1, SB2, SB3 Ford Thunderbird: Duet, Mac Mini Ford Expedition: SB Touch, USB drive iPhone's Profile: http://forums.slimdevices.com/member.php?userid=13622 View this thread: http://forums.slimdevices.com/showthread.php?t=107397 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] LMS won't access \media folder
I am in the process of setting up a new LMS-machine. Right now testing Mint 15, planning on Mint 18.1. Everything goes fine, except for one thing: I can't get LMS to access my music folders! My Flac partition is mounted on \media\vansloneker\Flac and LMS does not see anything inside \media. I followed the guide on http://wiki.slimdevices.com/index.php/Debian_Package to add LMS as group and set permissions, I tried setting permissions on the command line as well as with the file manager: alas. I spent hours on Google and found no way out. On my current machine I have mounted my Flac partition on \mnt\flac and I can't remember if I had problems getting it to find it there. But having the partition mounted on \media is sort of standard and easier to access with the file manager that's why I would like it that way. Vansloneker's Profile: http://forums.slimdevices.com/member.php?userid=64269 View this thread: http://forums.slimdevices.com/showthread.php?t=107397 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
rdmguy wrote: > Recently (since a few weeks) the squeezelite player frequently spikes to > 100% cpu utilization from a normal level of around 5%. When it spikes, > the complete system freezes and the music lags. > The traces show this line every time it lags: > > [00:07:22.249536] output_thread:655 XRUN > > Any idea what is wrong here? > > I am running on arch linux with ALSA and a very simple usb DAC. wich process raise to 100%? Could you please post the command line and state the type and format of the file being played? SB+, Klimo Merlino + Kent Gold, Monitor Audio Studio 20 Gold SE+, Klimo reference and DIS Interconnect. marcoc1712's Profile: http://forums.slimdevices.com/member.php?userid=34842 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
I switched over from running LMS on my aging ReadyNAS Duo v2 to pCP on a Pi3 (leaving the music files on the NAS). Nearly every step of the scan (incl. artist artwork processing) is about twice as fast as before. Except for the actual scan where most likely network I/O is limiting. The web UI is much snappier. Setup was easy as pie. And it does run some helpers which would fail on the ReadyNAS. Excellent job, guys! In addition to LMS duties it runs JiveLite using the HD Grid Skin to display information on a spare screen I had sitting around :-) One question: I decided to set the db memory parameter to "Maximum", expecting the little device to crash during the scan. But it run just fine. zswap seems to be enabled by default now? Michael http://www.herger.net/slim-plugins - MusicArtistInfo, MusicInfoSCR mherger's Profile: http://forums.slimdevices.com/member.php?userid=50 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Choice of basic LInux OS for LMS
I am using Lubuntu 12.10 for a couple of years now. It's rather crappy and I am a bit tired of it. Now that I have a better computer for my LMS I am testing Mint 15. I never got LMS to work on Mint 17.3 and I am surprised TS runs it on Mint 18. Vansloneker's Profile: http://forums.slimdevices.com/member.php?userid=64269 View this thread: http://forums.slimdevices.com/showthread.php?t=106707 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
Recently (since a few weeks) the squeezelite player frequently spikes to 100% cpu utilization from a normal level of around 5%. When it spikes, the complete system freezes and the music lags. The traces show this line every time it lags: [00:07:22.249536] output_thread:655 XRUN Any idea what is wrong here? rdmguy's Profile: http://forums.slimdevices.com/member.php?userid=66855 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
I performed a lot of tests and finally I am posting the results. Keep in mind that I am using Rpi\Rpi2\Rpi3 + Raspbian + pure MPD + USB DAC since years and I never experienced any problems, but I was looking to add a touch\LCD display, so i got the official Raspberry 7'' touch LCD and switched to Volumio, RuneAudio, pCP, etc. With pure MPD, even with very high resolution up to 384 kHz \ 24 bit, the sound was always perfect, then I started to add the LCD \ Touch. Of course with pure MPD, even with the LCD, the sound was perfect, but not with pCP :-( Two main issues with pCP: 1) the WiFi is unstable and the performance poor with pCP 3.20. With the older 3.11 performances always poor, but at least was stable. Even if I avoid using channels 12 and higher, even if thw built in WiFi connects at 54 Mpbs, performances are very poor and at least 5 times worst than with Raspbian. I suppose it is a driver problem. Anyway, with the wired Ethernet, pCP sounds perfect. 2) After being sure pCP 3.20 was working very fine with the wired Ethernet, with a fresh SD card just imaged from scratch, I installed Jivelite. Now playing any high resolution audio will produce randomic noise (pops, glitches, and scratches) during the playback The higher the resolution, the more frequent the noise. Increasing the buffer improve very little the performances, but the problem is still present. Loading the FLAC \ PCM files from the local SD card or from a USB media makes NO differences versus lodading from the NAS Playing with the LCD \ touch during the playback, will produce immediately noise in the audio. For example, if I change the volume Anyway, leaving the LCD un-touched, noise is still present. Even controlling the player from the web browser. Any idea how to work out this problem? Any suggestion? Regards. steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
I am an old Touch user and I know vu-meters are only available when the player is the touch, so yes, JiveLite is running on the Orange Pi One which is also the player. There is something like an attempt to render graphic things, but nothing clear is visible, it sounds like a graphic error. Ok, then most likely the assets were not adjusted for this screen size or skin. -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
Thank you for your fast answer. I am an old Touch user and I know vu-meters are only available when the player is the touch, so yes, JiveLite is running on the Orange Pi One which is also the player. There is something like an attempt to render graphic things, but nothing clear is visible, it sounds like a graphic error. In my side I wrote a very little python script to manage LCD 16x2 or 20x4 on the I2C especially for the Orange Pi Zero (it is also working for the Raspberry) because it was harder (so more fun) when you have more or less no documentation, for the Orange Pi Zero, and you have to discover by yourself. Looking at JiveLite running gives me some ideas for my script! Thanks again for JiveLite and your support. renaud's Profile: http://forums.slimdevices.com/member.php?userid=47911 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
bb3ii wrote: > Really enjoying the 3.20 with my Pi2 /Kali / Piano 2.1; even managed to > get the DSP functioning. > > What are the chances of getting the dual mono capability of the Piano > 2.1 added to piCorePlayer? I have been using it now and then with > Volumio and it is a subtle but notable improvement, for Volumio at > least. Fairly certain piCore would be a very admirable platform for > implementing this technique. > > Anyone care to endorse this thought? This is also my question. The dual mono setting of the Piano 2.1 is - in my opionion - special because of the imaging. The sound is very open. So, I also hope the dual mono setting of the Piano 2.1 will one day be implemented in Picoreplayer. DJDR's Profile: http://forums.slimdevices.com/member.php?userid=65296 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
- I have deselected some options (like "Artwork") in the "NowPlaying" menu and then the options are no more here in the menu. Is there any way to see them back? The choices in this menu depend on the skin used. The one you're using doesn't offer any options. - seems in the 1920x1080 some buttons (next previous volume+/-) are no more here when playing : is it a "functionality"? Rather lack there of :-). That skin imho was designed with the remote control in mind, not to be used on eg. a touch screen. Not all buttons can be navigated to using a remote. Therefore they're not there. Does the build you're using offer other Grid Skins? If so, you might be able to tweak them to use your native resolution instead of the HD Grid Skins: Set JL_SCREEN_WIDTH and JL_SCREEN_HEIGHT environment variables to your resolution. Would that work? - vu meter and sound analyzer are not working (but maybe I have to install other stuff / libs?), any idea? AFAIK they're only available if squeezelite is running on the same computer. - I installed JiveLite "the hard way": following the instructions on the first page, I knew that google code closed and I knew JiveLite was on github, so I changed the git clone address. But why do you not change the instructions directly on the first page of this thread? Triode, who created JiveLite and did that posting, has left the community a few years ago. The project itself is now maintained mostly by ralphy (the owner of the github account). -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix