Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
Mnyb wrote: > Ok did the uppgrade with config file on USB stick went well , some > settings did not carry over like static-ip and some more ,but the harder > to remember tweaks and squeezelite settings did . > So this was easy enough to do . > > I have a bunch of SD cards to try with i always keep a working one from > previus version , its very easy to roll back that way. > > SO now I have two working 3.5.0 piCores (before one piCore 3.1 and one > max2play) great job team :) > > One of the is the audio version too , just to try it . > > Anyone care to explain more on how to use the -U option , if needed and > whatnot ? The -U option will only work with normal software volume control. If you are using the -V option to use the digital volume control, then -U does not work. There is a soundcard configuration button at the top of the page by the sound card selection that would have more relevant controls for your card. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
Mnyb wrote: > OK then , i'll try that later Ok did the uppgrade with config file on USB stick went well , some settings did not carry over like static-ip and some more ,but the harder to remember tweaks and squeezelite settings did . So this was easy enough to do . I have a bunch of SD cards to try with i always keep a working one from previus version , its very easy to roll back that way. SO now I have two working 3.5.0 piCores (before one piCore 3.1 and one max2play) great job team :) One of the is the audio version too , just to try it . Anyone care to explain more on how to use the -U option , if needed and whatnot ? Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH 2 x MeridianDSP5200 MeridianDSP5200HC 2 xMeridianDSP3100 +Rel Stadium 3 sub. Bedroom/Office: Boom Kitchen: Touch + powered Fostex PM0.4 Misc use: Radio (with battery) iPad1 with iPengHD & SqueezePad (spares Touch, SB3, reciever ,controller ) server HP proliant micro server N36L with ClearOS Linux http://people.xiph.org/~xiphmont/demo/neil-young.html Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
That's funny Huxmut. Perhaps I should only advertise that image on the audiophile websites. Wifi is a 4 letter word over there If you don't know what to choose, then you don't need the audio kernel version. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hey devs, Audio version needs to be renamed to Kernal Latency Tweak with Reduced Functionality (KLTRF) version @liffy99, the audio version doesnt play nice with wifi and other things. Reflash using the normal version and wifi will be easy. Just remember the limitation on special characters in the wifi password :) rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 + HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 | huxmut's Profile: http://forums.slimdevices.com/member.php?userid=65108 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What is the difference / advantage with the 'Audio' version 3.5 ? I naturally opted for that as I only play music via the RPI/Picoreplayer. liffy99's Profile: http://forums.slimdevices.com/member.php?userid=7832 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > I'm assuming you tried to reboot after saving.. Please move this to > the this thread. > https://forums.slimdevices.com/showthread.php?108852-Announce-piCorePlayer-3-5-0 > > When you do, please switch to beta mode, then there will be a > diagnostics button on the page. Please post the contents of the dmesg > section and the loaded modules. OK, just to recap, this is with the RPI3+Allo Digione connected via ethernet cable (I cannot manage to connect via wifi). DMSEG Section : [0.00] Booting Linux on physical CPU 0x0 [0.00] Linux version 4.14.26-rt19-pcpAudioCore_v7 (paul@NUC-Devel) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1 SMP PREEMPT RT Wed Mar 14 23:23:12 EDT 2018 [0.00] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [0.00] CPU: div instructions available: patching division code [0.00] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [0.00] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [0.00] Memory policy: Data cache writealloc [0.00] cma: Reserved 8 MiB at 0x3dc0 [0.00] On node 0 totalpages: 255488 [0.00] free_area_init_node: node 0, pgdat 80c832c0, node_mem_map bd336000 [0.00] Normal zone: 2246 pages used for memmap [0.00] Normal zone: 0 pages reserved [0.00] Normal zone: 255488 pages, LIFO batch:31 [0.00] percpu: Embedded 18 pages/cpu @be59b000 s41600 r8192 d23936 u73728 [0.00] pcpu-alloc: s41600 r8192 d23936 u73728 alloc=18*4096 [0.00] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0.00] Built 1 zonelists, mobility grouping on. Total pages: 253242 [0.00] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f00 vc_mem.mem_size=0x3f60 tz=GMT0BST,M3.5.0/1,M10.5.0 dwc_otg.fiq_fsm_mask=0xF host=piCorePlayer dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap cron consoleblank=0 waitusb=2 [0.00] PID hash table entries: 4096 (order: 2, 16384 bytes) [0.00] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [0.00] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [0.00] Memory: 986168K/1021952K available (7168K kernel code, 551K rwdata, 2048K rodata, 1024K init, 441K bss, 27592K reserved, 8192K cma-reserved) [0.00] Virtual kernel memory layout: [0.00] vector : 0x - 0x1000 ( 4 kB) [0.00] fixmap : 0xffc0 - 0xfff0 (3072 kB) [0.00] vmalloc : 0xbe80 - 0xff80 (1040 MB) [0.00] lowmem : 0x8000 - 0xbe60 ( 998 MB) [0.00] modules : 0x7f00 - 0x8000 ( 16 MB) [0.00] .text : 0x80008000 - 0x8080 (8160 kB) [0.00] .init : 0x80b0 - 0x80c0 (1024 kB) [0.00] .data : 0x80c0 - 0x80c89cd8 ( 552 kB) [0.00].bss : 0x80c90fd0 - 0x80cff6ac ( 442 kB) [0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [0.00] ftrace: allocating 24758 entries in 73 pages [0.00] Preemptible hierarchical RCU implementation. [0.00] No expedited grace period (rcu_normal_after_boot). [0.00] Tasks RCU enabled. [0.00] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [0.00] NO_HZ: Clearing 0 from nohz_full range for timekeeping [0.00] NO_HZ: Full dynticks CPUs: 1-3. [0.00] Offload RCU callbacks from CPUs: 1-3. [0.00] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [0.00] clocksource: arch_sys_counter: mask: 0xff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [0.03] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [0.09] Switching to timer-based delay loop, resolution 52ns [0.000145] Console: colour dummy device 80x30 [0.000159] console [tty1] enabled [0.000172] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [0.000178] pid_max: default: 32768 minimum: 301 [0.000280] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [0.000289] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [0.000785] Disabling memory control group subsystem [0.000834] CPU: Testing write buffer coherency: ok [0.001107] CPU0: thread -1, cpu 0, socket 0, mpidr 8000 [0.040064] Setting up static identity map for 0x10 - 0x10003c [0.080053] Hierarchical SRCU implementation. [0.160146] smp: Bringing up secondary CPUs ... [0.260593] CPU1: thread -1, cpu 1, socket 0, mpidr 8001 [0.360652] CPU2: thread -1, cpu 2, socket 0, mpidr 8002 [0.460745] CPU3: thread -1, cpu 3, socket 0, mpidr 8003
